xref: /linux/arch/microblaze/mm/init.c (revision 132db93572821ec2fdf81e354cc40f558faf7e4f)
1 /*
2  * Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
3  * Copyright (C) 2006 Atmark Techno, Inc.
4  *
5  * This file is subject to the terms and conditions of the GNU General Public
6  * License. See the file "COPYING" in the main directory of this archive
7  * for more details.
8  */
9 
10 #include <linux/dma-contiguous.h>
11 #include <linux/memblock.h>
12 #include <linux/init.h>
13 #include <linux/kernel.h>
14 #include <linux/mm.h> /* mem_init */
15 #include <linux/initrd.h>
16 #include <linux/pagemap.h>
17 #include <linux/pfn.h>
18 #include <linux/slab.h>
19 #include <linux/swap.h>
20 #include <linux/export.h>
21 
22 #include <asm/page.h>
23 #include <asm/mmu_context.h>
24 #include <asm/pgalloc.h>
25 #include <asm/sections.h>
26 #include <asm/tlb.h>
27 #include <asm/fixmap.h>
28 
29 /* Use for MMU and noMMU because of PCI generic code */
30 int mem_init_done;
31 
32 #ifndef CONFIG_MMU
33 unsigned int __page_offset;
34 EXPORT_SYMBOL(__page_offset);
35 #endif /* CONFIG_MMU */
36 
37 char *klimit = _end;
38 
39 /*
40  * Initialize the bootmem system and give it all the memory we
41  * have available.
42  */
43 unsigned long memory_start;
44 EXPORT_SYMBOL(memory_start);
45 unsigned long memory_size;
46 EXPORT_SYMBOL(memory_size);
47 unsigned long lowmem_size;
48 
49 #ifdef CONFIG_HIGHMEM
50 pte_t *kmap_pte;
51 EXPORT_SYMBOL(kmap_pte);
52 
53 static void __init highmem_init(void)
54 {
55 	pr_debug("%x\n", (u32)PKMAP_BASE);
56 	map_page(PKMAP_BASE, 0, 0);	/* XXX gross */
57 	pkmap_page_table = virt_to_kpte(PKMAP_BASE);
58 
59 	kmap_pte = virt_to_kpte(__fix_to_virt(FIX_KMAP_BEGIN));
60 }
61 
62 static void highmem_setup(void)
63 {
64 	unsigned long pfn;
65 
66 	for (pfn = max_low_pfn; pfn < max_pfn; ++pfn) {
67 		struct page *page = pfn_to_page(pfn);
68 
69 		/* FIXME not sure about */
70 		if (!memblock_is_reserved(pfn << PAGE_SHIFT))
71 			free_highmem_page(page);
72 	}
73 }
74 #endif /* CONFIG_HIGHMEM */
75 
76 /*
77  * paging_init() sets up the page tables - in fact we've already done this.
78  */
79 static void __init paging_init(void)
80 {
81 	unsigned long zones_size[MAX_NR_ZONES];
82 #ifdef CONFIG_MMU
83 	int idx;
84 
85 	/* Setup fixmaps */
86 	for (idx = 0; idx < __end_of_fixed_addresses; idx++)
87 		clear_fixmap(idx);
88 #endif
89 
90 	/* Clean every zones */
91 	memset(zones_size, 0, sizeof(zones_size));
92 
93 #ifdef CONFIG_HIGHMEM
94 	highmem_init();
95 
96 	zones_size[ZONE_DMA] = max_low_pfn;
97 	zones_size[ZONE_HIGHMEM] = max_pfn;
98 #else
99 	zones_size[ZONE_DMA] = max_pfn;
100 #endif
101 
102 	/* We don't have holes in memory map */
103 	free_area_init(zones_size);
104 }
105 
106 void __init setup_memory(void)
107 {
108 	struct memblock_region *reg;
109 
110 #ifndef CONFIG_MMU
111 	u32 kernel_align_start, kernel_align_size;
112 
113 	/* Find main memory where is the kernel */
114 	for_each_memblock(memory, reg) {
115 		memory_start = (u32)reg->base;
116 		lowmem_size = reg->size;
117 		if ((memory_start <= (u32)_text) &&
118 			((u32)_text <= (memory_start + lowmem_size - 1))) {
119 			memory_size = lowmem_size;
120 			PAGE_OFFSET = memory_start;
121 			pr_info("%s: Main mem: 0x%x, size 0x%08x\n",
122 				__func__, (u32) memory_start,
123 					(u32) memory_size);
124 			break;
125 		}
126 	}
127 
128 	if (!memory_start || !memory_size) {
129 		panic("%s: Missing memory setting 0x%08x, size=0x%08x\n",
130 			__func__, (u32) memory_start, (u32) memory_size);
131 	}
132 
133 	/* reservation of region where is the kernel */
134 	kernel_align_start = PAGE_DOWN((u32)_text);
135 	/* ALIGN can be remove because _end in vmlinux.lds.S is align */
136 	kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start;
137 	pr_info("%s: kernel addr:0x%08x-0x%08x size=0x%08x\n",
138 		__func__, kernel_align_start, kernel_align_start
139 			+ kernel_align_size, kernel_align_size);
140 	memblock_reserve(kernel_align_start, kernel_align_size);
141 #endif
142 	/*
143 	 * Kernel:
144 	 * start: base phys address of kernel - page align
145 	 * end: base phys address of kernel - page align
146 	 *
147 	 * min_low_pfn - the first page (mm/bootmem.c - node_boot_start)
148 	 * max_low_pfn
149 	 * max_mapnr - the first unused page (mm/bootmem.c - node_low_pfn)
150 	 */
151 
152 	/* memory start is from the kernel end (aligned) to higher addr */
153 	min_low_pfn = memory_start >> PAGE_SHIFT; /* minimum for allocation */
154 	/* RAM is assumed contiguous */
155 	max_mapnr = memory_size >> PAGE_SHIFT;
156 	max_low_pfn = ((u64)memory_start + (u64)lowmem_size) >> PAGE_SHIFT;
157 	max_pfn = ((u64)memory_start + (u64)memory_size) >> PAGE_SHIFT;
158 
159 	pr_info("%s: max_mapnr: %#lx\n", __func__, max_mapnr);
160 	pr_info("%s: min_low_pfn: %#lx\n", __func__, min_low_pfn);
161 	pr_info("%s: max_low_pfn: %#lx\n", __func__, max_low_pfn);
162 	pr_info("%s: max_pfn: %#lx\n", __func__, max_pfn);
163 
164 	/* Add active regions with valid PFNs */
165 	for_each_memblock(memory, reg) {
166 		unsigned long start_pfn, end_pfn;
167 
168 		start_pfn = memblock_region_memory_base_pfn(reg);
169 		end_pfn = memblock_region_memory_end_pfn(reg);
170 		memblock_set_node(start_pfn << PAGE_SHIFT,
171 				  (end_pfn - start_pfn) << PAGE_SHIFT,
172 				  &memblock.memory, 0);
173 	}
174 
175 	/* XXX need to clip this if using highmem? */
176 	sparse_memory_present_with_active_regions(0);
177 
178 	paging_init();
179 }
180 
181 void __init mem_init(void)
182 {
183 	high_memory = (void *)__va(memory_start + lowmem_size - 1);
184 
185 	/* this will put all memory onto the freelists */
186 	memblock_free_all();
187 #ifdef CONFIG_HIGHMEM
188 	highmem_setup();
189 #endif
190 
191 	mem_init_print_info(NULL);
192 	mem_init_done = 1;
193 }
194 
195 #ifndef CONFIG_MMU
196 int page_is_ram(unsigned long pfn)
197 {
198 	return __range_ok(pfn, 0);
199 }
200 #else
201 int page_is_ram(unsigned long pfn)
202 {
203 	return pfn < max_low_pfn;
204 }
205 
206 /*
207  * Check for command-line options that affect what MMU_init will do.
208  */
209 static void mm_cmdline_setup(void)
210 {
211 	unsigned long maxmem = 0;
212 	char *p = cmd_line;
213 
214 	/* Look for mem= option on command line */
215 	p = strstr(cmd_line, "mem=");
216 	if (p) {
217 		p += 4;
218 		maxmem = memparse(p, &p);
219 		if (maxmem && memory_size > maxmem) {
220 			memory_size = maxmem;
221 			memblock.memory.regions[0].size = memory_size;
222 		}
223 	}
224 }
225 
226 /*
227  * MMU_init_hw does the chip-specific initialization of the MMU hardware.
228  */
229 static void __init mmu_init_hw(void)
230 {
231 	/*
232 	 * The Zone Protection Register (ZPR) defines how protection will
233 	 * be applied to every page which is a member of a given zone. At
234 	 * present, we utilize only two of the zones.
235 	 * The zone index bits (of ZSEL) in the PTE are used for software
236 	 * indicators, except the LSB.  For user access, zone 1 is used,
237 	 * for kernel access, zone 0 is used.  We set all but zone 1
238 	 * to zero, allowing only kernel access as indicated in the PTE.
239 	 * For zone 1, we set a 01 binary (a value of 10 will not work)
240 	 * to allow user access as indicated in the PTE.  This also allows
241 	 * kernel access as indicated in the PTE.
242 	 */
243 	__asm__ __volatile__ ("ori r11, r0, 0x10000000;" \
244 			"mts rzpr, r11;"
245 			: : : "r11");
246 }
247 
248 /*
249  * MMU_init sets up the basic memory mappings for the kernel,
250  * including both RAM and possibly some I/O regions,
251  * and sets up the page tables and the MMU hardware ready to go.
252  */
253 
254 /* called from head.S */
255 asmlinkage void __init mmu_init(void)
256 {
257 	unsigned int kstart, ksize;
258 
259 	if (!memblock.reserved.cnt) {
260 		pr_emerg("Error memory count\n");
261 		machine_restart(NULL);
262 	}
263 
264 	if ((u32) memblock.memory.regions[0].size < 0x400000) {
265 		pr_emerg("Memory must be greater than 4MB\n");
266 		machine_restart(NULL);
267 	}
268 
269 	if ((u32) memblock.memory.regions[0].size < kernel_tlb) {
270 		pr_emerg("Kernel size is greater than memory node\n");
271 		machine_restart(NULL);
272 	}
273 
274 	/* Find main memory where the kernel is */
275 	memory_start = (u32) memblock.memory.regions[0].base;
276 	lowmem_size = memory_size = (u32) memblock.memory.regions[0].size;
277 
278 	if (lowmem_size > CONFIG_LOWMEM_SIZE) {
279 		lowmem_size = CONFIG_LOWMEM_SIZE;
280 #ifndef CONFIG_HIGHMEM
281 		memory_size = lowmem_size;
282 #endif
283 	}
284 
285 	mm_cmdline_setup(); /* FIXME parse args from command line - not used */
286 
287 	/*
288 	 * Map out the kernel text/data/bss from the available physical
289 	 * memory.
290 	 */
291 	kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
292 	/* kernel size */
293 	ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
294 	memblock_reserve(kstart, ksize);
295 
296 #if defined(CONFIG_BLK_DEV_INITRD)
297 	/* Remove the init RAM disk from the available memory. */
298 	if (initrd_start) {
299 		unsigned long size;
300 		size = initrd_end - initrd_start;
301 		memblock_reserve(__virt_to_phys(initrd_start), size);
302 	}
303 #endif /* CONFIG_BLK_DEV_INITRD */
304 
305 	/* Initialize the MMU hardware */
306 	mmu_init_hw();
307 
308 	/* Map in all of RAM starting at CONFIG_KERNEL_START */
309 	mapin_ram();
310 
311 	/* Extend vmalloc and ioremap area as big as possible */
312 #ifdef CONFIG_HIGHMEM
313 	ioremap_base = ioremap_bot = PKMAP_BASE;
314 #else
315 	ioremap_base = ioremap_bot = FIXADDR_START;
316 #endif
317 
318 	/* Initialize the context management stuff */
319 	mmu_context_init();
320 
321 	/* Shortly after that, the entire linear mapping will be available */
322 	/* This will also cause that unflatten device tree will be allocated
323 	 * inside 768MB limit */
324 	memblock_set_current_limit(memory_start + lowmem_size - 1);
325 
326 	parse_early_param();
327 
328 	/* CMA initialization */
329 	dma_contiguous_reserve(memory_start + lowmem_size - 1);
330 }
331 
332 /* This is only called until mem_init is done. */
333 void __init *early_get_page(void)
334 {
335 	/*
336 	 * Mem start + kernel_tlb -> here is limit
337 	 * because of mem mapping from head.S
338 	 */
339 	return memblock_alloc_try_nid_raw(PAGE_SIZE, PAGE_SIZE,
340 				MEMBLOCK_LOW_LIMIT, memory_start + kernel_tlb,
341 				NUMA_NO_NODE);
342 }
343 
344 #endif /* CONFIG_MMU */
345 
346 void * __ref zalloc_maybe_bootmem(size_t size, gfp_t mask)
347 {
348 	void *p;
349 
350 	if (mem_init_done) {
351 		p = kzalloc(size, mask);
352 	} else {
353 		p = memblock_alloc(size, SMP_CACHE_BYTES);
354 		if (!p)
355 			panic("%s: Failed to allocate %zu bytes\n",
356 			      __func__, size);
357 	}
358 
359 	return p;
360 }
361