xref: /linux/arch/m68k/mm/fault.c (revision ca55b2fef3a9373fcfc30f82fd26bc7fccbda732)
1 /*
2  *  linux/arch/m68k/mm/fault.c
3  *
4  *  Copyright (C) 1995  Hamish Macdonald
5  */
6 
7 #include <linux/mman.h>
8 #include <linux/mm.h>
9 #include <linux/kernel.h>
10 #include <linux/ptrace.h>
11 #include <linux/interrupt.h>
12 #include <linux/module.h>
13 #include <linux/uaccess.h>
14 
15 #include <asm/setup.h>
16 #include <asm/traps.h>
17 #include <asm/pgalloc.h>
18 
19 extern void die_if_kernel(char *, struct pt_regs *, long);
20 
21 int send_fault_sig(struct pt_regs *regs)
22 {
23 	siginfo_t siginfo = { 0, 0, 0, };
24 
25 	siginfo.si_signo = current->thread.signo;
26 	siginfo.si_code = current->thread.code;
27 	siginfo.si_addr = (void *)current->thread.faddr;
28 	pr_debug("send_fault_sig: %p,%d,%d\n", siginfo.si_addr,
29 		 siginfo.si_signo, siginfo.si_code);
30 
31 	if (user_mode(regs)) {
32 		force_sig_info(siginfo.si_signo,
33 			       &siginfo, current);
34 	} else {
35 		if (handle_kernel_fault(regs))
36 			return -1;
37 
38 		//if (siginfo.si_signo == SIGBUS)
39 		//	force_sig_info(siginfo.si_signo,
40 		//		       &siginfo, current);
41 
42 		/*
43 		 * Oops. The kernel tried to access some bad page. We'll have to
44 		 * terminate things with extreme prejudice.
45 		 */
46 		if ((unsigned long)siginfo.si_addr < PAGE_SIZE)
47 			pr_alert("Unable to handle kernel NULL pointer dereference");
48 		else
49 			pr_alert("Unable to handle kernel access");
50 		pr_cont(" at virtual address %p\n", siginfo.si_addr);
51 		die_if_kernel("Oops", regs, 0 /*error_code*/);
52 		do_exit(SIGKILL);
53 	}
54 
55 	return 1;
56 }
57 
58 /*
59  * This routine handles page faults.  It determines the problem, and
60  * then passes it off to one of the appropriate routines.
61  *
62  * error_code:
63  *	bit 0 == 0 means no page found, 1 means protection fault
64  *	bit 1 == 0 means read, 1 means write
65  *
66  * If this routine detects a bad access, it returns 1, otherwise it
67  * returns 0.
68  */
69 int do_page_fault(struct pt_regs *regs, unsigned long address,
70 			      unsigned long error_code)
71 {
72 	struct mm_struct *mm = current->mm;
73 	struct vm_area_struct * vma;
74 	int fault;
75 	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
76 
77 	pr_debug("do page fault:\nregs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld, %p\n",
78 		regs->sr, regs->pc, address, error_code, mm ? mm->pgd : NULL);
79 
80 	/*
81 	 * If we're in an interrupt or have no user
82 	 * context, we must not take the fault..
83 	 */
84 	if (faulthandler_disabled() || !mm)
85 		goto no_context;
86 
87 	if (user_mode(regs))
88 		flags |= FAULT_FLAG_USER;
89 retry:
90 	down_read(&mm->mmap_sem);
91 
92 	vma = find_vma(mm, address);
93 	if (!vma)
94 		goto map_err;
95 	if (vma->vm_flags & VM_IO)
96 		goto acc_err;
97 	if (vma->vm_start <= address)
98 		goto good_area;
99 	if (!(vma->vm_flags & VM_GROWSDOWN))
100 		goto map_err;
101 	if (user_mode(regs)) {
102 		/* Accessing the stack below usp is always a bug.  The
103 		   "+ 256" is there due to some instructions doing
104 		   pre-decrement on the stack and that doesn't show up
105 		   until later.  */
106 		if (address + 256 < rdusp())
107 			goto map_err;
108 	}
109 	if (expand_stack(vma, address))
110 		goto map_err;
111 
112 /*
113  * Ok, we have a good vm_area for this memory access, so
114  * we can handle it..
115  */
116 good_area:
117 	pr_debug("do_page_fault: good_area\n");
118 	switch (error_code & 3) {
119 		default:	/* 3: write, present */
120 			/* fall through */
121 		case 2:		/* write, not present */
122 			if (!(vma->vm_flags & VM_WRITE))
123 				goto acc_err;
124 			flags |= FAULT_FLAG_WRITE;
125 			break;
126 		case 1:		/* read, present */
127 			goto acc_err;
128 		case 0:		/* read, not present */
129 			if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
130 				goto acc_err;
131 	}
132 
133 	/*
134 	 * If for any reason at all we couldn't handle the fault,
135 	 * make sure we exit gracefully rather than endlessly redo
136 	 * the fault.
137 	 */
138 
139 	fault = handle_mm_fault(mm, vma, address, flags);
140 	pr_debug("handle_mm_fault returns %d\n", fault);
141 
142 	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
143 		return 0;
144 
145 	if (unlikely(fault & VM_FAULT_ERROR)) {
146 		if (fault & VM_FAULT_OOM)
147 			goto out_of_memory;
148 		else if (fault & VM_FAULT_SIGSEGV)
149 			goto map_err;
150 		else if (fault & VM_FAULT_SIGBUS)
151 			goto bus_err;
152 		BUG();
153 	}
154 
155 	/*
156 	 * Major/minor page fault accounting is only done on the
157 	 * initial attempt. If we go through a retry, it is extremely
158 	 * likely that the page will be found in page cache at that point.
159 	 */
160 	if (flags & FAULT_FLAG_ALLOW_RETRY) {
161 		if (fault & VM_FAULT_MAJOR)
162 			current->maj_flt++;
163 		else
164 			current->min_flt++;
165 		if (fault & VM_FAULT_RETRY) {
166 			/* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
167 			 * of starvation. */
168 			flags &= ~FAULT_FLAG_ALLOW_RETRY;
169 			flags |= FAULT_FLAG_TRIED;
170 
171 			/*
172 			 * No need to up_read(&mm->mmap_sem) as we would
173 			 * have already released it in __lock_page_or_retry
174 			 * in mm/filemap.c.
175 			 */
176 
177 			goto retry;
178 		}
179 	}
180 
181 	up_read(&mm->mmap_sem);
182 	return 0;
183 
184 /*
185  * We ran out of memory, or some other thing happened to us that made
186  * us unable to handle the page fault gracefully.
187  */
188 out_of_memory:
189 	up_read(&mm->mmap_sem);
190 	if (!user_mode(regs))
191 		goto no_context;
192 	pagefault_out_of_memory();
193 	return 0;
194 
195 no_context:
196 	current->thread.signo = SIGBUS;
197 	current->thread.faddr = address;
198 	return send_fault_sig(regs);
199 
200 bus_err:
201 	current->thread.signo = SIGBUS;
202 	current->thread.code = BUS_ADRERR;
203 	current->thread.faddr = address;
204 	goto send_sig;
205 
206 map_err:
207 	current->thread.signo = SIGSEGV;
208 	current->thread.code = SEGV_MAPERR;
209 	current->thread.faddr = address;
210 	goto send_sig;
211 
212 acc_err:
213 	current->thread.signo = SIGSEGV;
214 	current->thread.code = SEGV_ACCERR;
215 	current->thread.faddr = address;
216 
217 send_sig:
218 	up_read(&mm->mmap_sem);
219 	return send_fault_sig(regs);
220 }
221