xref: /linux/arch/m68k/kernel/pcibios.c (revision f3539c12d8196ce0a1993364d30b3a18908470d1)
1 /*
2  * pci.c -- basic PCI support code
3  *
4  * This program is free software; you can redistribute  it and/or modify it
5  * under  the terms of  the GNU General  Public License as published by the
6  * Free Software Foundation;  either version 2 of the  License, or (at your
7  * option) any later version.
8  *
9  * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org>
10  */
11 
12 #include <linux/kernel.h>
13 #include <linux/types.h>
14 #include <linux/mm.h>
15 #include <linux/init.h>
16 #include <linux/pci.h>
17 
18 /*
19  * From arch/i386/kernel/pci-i386.c:
20  *
21  * We need to avoid collisions with `mirrored' VGA ports
22  * and other strange ISA hardware, so we always want the
23  * addresses to be allocated in the 0x000-0x0ff region
24  * modulo 0x400.
25  *
26  * Why? Because some silly external IO cards only decode
27  * the low 10 bits of the IO address. The 0x00-0xff region
28  * is reserved for motherboard devices that decode all 16
29  * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
30  * but we want to try to avoid allocating at 0x2900-0x2bff
31  * which might be mirrored at 0x0100-0x03ff..
32  */
33 resource_size_t pcibios_align_resource(void *data, const struct resource *res,
34 	resource_size_t size, resource_size_t align)
35 {
36 	resource_size_t start = res->start;
37 
38 	if ((res->flags & IORESOURCE_IO) && (start & 0x300))
39 		start = (start + 0x3ff) & ~0x3ff;
40 
41 	start = (start + align - 1) & ~(align - 1);
42 
43 	return start;
44 }
45 
46 /*
47  * This is taken from the ARM code for this.
48  */
49 int pcibios_enable_device(struct pci_dev *dev, int mask)
50 {
51 	struct resource *r;
52 	u16 cmd, newcmd;
53 	int idx;
54 
55 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
56 	newcmd = cmd;
57 
58 	for (idx = 0; idx < 6; idx++) {
59 		/* Only set up the requested stuff */
60 		if (!(mask & (1 << idx)))
61 			continue;
62 
63 		r = dev->resource + idx;
64 		if (!r->start && r->end) {
65 			pr_err("PCI: Device %s not available because of resource collisions\n",
66 				pci_name(dev));
67 			return -EINVAL;
68 		}
69 		if (r->flags & IORESOURCE_IO)
70 			newcmd |= PCI_COMMAND_IO;
71 		if (r->flags & IORESOURCE_MEM)
72 			newcmd |= PCI_COMMAND_MEMORY;
73 	}
74 
75 	/*
76 	 * Bridges (eg, cardbus bridges) need to be fully enabled
77 	 */
78 	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
79 		newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
80 
81 
82 	if (newcmd != cmd) {
83 		pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n",
84 			pci_name(dev), cmd, newcmd);
85 		pci_write_config_word(dev, PCI_COMMAND, newcmd);
86 	}
87 	return 0;
88 }
89 
90 void pcibios_fixup_bus(struct pci_bus *bus)
91 {
92 	struct pci_dev *dev;
93 
94 	list_for_each_entry(dev, &bus->devices, bus_list) {
95 		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8);
96 		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 32);
97 	}
98 }
99 
100 char *pcibios_setup(char *str)
101 {
102 	return str;
103 }
104 
105