1 /****************************************************************************/ 2 3 /* 4 * mcfintc.h -- support definitions for the simple ColdFire 5 * Interrupt Controller 6 * 7 * (C) Copyright 2009, Greg Ungerer <gerg@uclinux.org> 8 */ 9 10 /****************************************************************************/ 11 #ifndef mcfintc_h 12 #define mcfintc_h 13 /****************************************************************************/ 14 15 /* 16 * Most of the older ColdFire parts use the same simple interrupt 17 * controller. This is currently used on the 5206, 5206e, 5249, 5307 18 * and 5407 parts. 19 * 20 * The builtin peripherals are masked through dedicated bits in the 21 * Interrupt Mask register (IMR) - and this is not indexed (or in any way 22 * related to) the actual interrupt number they use. So knowing the IRQ 23 * number doesn't explicitly map to a certain internal device for 24 * interrupt control purposes. 25 */ 26 27 /* 28 * Bit definitions for the ICR family of registers. 29 */ 30 #define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ 31 #define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ 32 #define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ 33 #define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ 34 #define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ 35 #define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ 36 #define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ 37 #define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ 38 #define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ 39 40 #define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ 41 #define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ 42 #define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ 43 #define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ 44 45 /* 46 * IMR bit position definitions. Not all ColdFire parts with this interrupt 47 * controller actually support all of these interrupt sources. But the bit 48 * numbers are the same in all cores. 49 */ 50 #define MCFINTC_EINT1 1 /* External int #1 */ 51 #define MCFINTC_EINT2 2 /* External int #2 */ 52 #define MCFINTC_EINT3 3 /* External int #3 */ 53 #define MCFINTC_EINT4 4 /* External int #4 */ 54 #define MCFINTC_EINT5 5 /* External int #5 */ 55 #define MCFINTC_EINT6 6 /* External int #6 */ 56 #define MCFINTC_EINT7 7 /* External int #7 */ 57 #define MCFINTC_SWT 8 /* Software Watchdog */ 58 #define MCFINTC_TIMER1 9 59 #define MCFINTC_TIMER2 10 60 #define MCFINTC_I2C 11 /* I2C / MBUS */ 61 #define MCFINTC_UART0 12 62 #define MCFINTC_UART1 13 63 #define MCFINTC_DMA0 14 64 #define MCFINTC_DMA1 15 65 #define MCFINTC_DMA2 16 66 #define MCFINTC_DMA3 17 67 #define MCFINTC_QSPI 18 68 69 #ifndef __ASSEMBLER__ 70 71 /* 72 * There is no one-is-one correspondance between the interrupt number (irq) 73 * and the bit fields on the mask register. So we create a per-cpu type 74 * mapping of irq to mask bit. The CPU platform code needs to register 75 * its supported irq's at init time, using this function. 76 */ 77 extern unsigned char mcf_irq2imr[]; 78 static inline void mcf_mapirq2imr(int irq, int imr) 79 { 80 mcf_irq2imr[irq] = imr; 81 } 82 83 void mcf_autovector(int irq); 84 void mcf_setimr(int index); 85 void mcf_clrimr(int index); 86 #endif 87 88 /****************************************************************************/ 89 #endif /* mcfintc_h */ 90