1 /***************************************************************************/ 2 3 /* 4 * m527x.c -- platform support for ColdFire 527x based boards 5 * 6 * Sub-architcture dependent initialization code for the Freescale 7 * 5270/5271 and 5274/5275 CPUs. 8 * 9 * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com) 10 * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com) 11 */ 12 13 /***************************************************************************/ 14 15 #include <linux/kernel.h> 16 #include <linux/param.h> 17 #include <linux/init.h> 18 #include <linux/io.h> 19 #include <asm/machdep.h> 20 #include <asm/coldfire.h> 21 #include <asm/mcfsim.h> 22 #include <asm/mcfuart.h> 23 #include <asm/mcfclk.h> 24 25 /***************************************************************************/ 26 27 DEFINE_CLK(pll, "pll.0", MCF_CLK); 28 DEFINE_CLK(sys, "sys.0", MCF_BUSCLK); 29 DEFINE_CLK(mcfpit0, "mcfpit.0", MCF_CLK); 30 DEFINE_CLK(mcfpit1, "mcfpit.1", MCF_CLK); 31 DEFINE_CLK(mcfpit2, "mcfpit.2", MCF_CLK); 32 DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK); 33 DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK); 34 DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK); 35 DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK); 36 DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK); 37 DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK); 38 DEFINE_CLK(fec1, "fec.1", MCF_BUSCLK); 39 40 struct clk *mcf_clks[] = { 41 &clk_pll, 42 &clk_sys, 43 &clk_mcfpit0, 44 &clk_mcfpit1, 45 &clk_mcfpit2, 46 &clk_mcfpit3, 47 &clk_mcfuart0, 48 &clk_mcfuart1, 49 &clk_mcfuart2, 50 &clk_mcfqspi0, 51 &clk_fec0, 52 &clk_fec1, 53 NULL 54 }; 55 56 /***************************************************************************/ 57 58 static void __init m527x_qspi_init(void) 59 { 60 #if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) 61 #if defined(CONFIG_M5271) 62 u16 par; 63 64 /* setup QSPS pins for QSPI with gpio CS control */ 65 writeb(0x1f, MCFGPIO_PAR_QSPI); 66 /* and CS2 & CS3 as gpio */ 67 par = readw(MCFGPIO_PAR_TIMER); 68 par &= 0x3f3f; 69 writew(par, MCFGPIO_PAR_TIMER); 70 #elif defined(CONFIG_M5275) 71 /* setup QSPS pins for QSPI with gpio CS control */ 72 writew(0x003e, MCFGPIO_PAR_QSPI); 73 #endif 74 #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ 75 } 76 77 /***************************************************************************/ 78 79 static void __init m527x_uarts_init(void) 80 { 81 u16 sepmask; 82 83 /* 84 * External Pin Mask Setting & Enable External Pin for Interface 85 */ 86 sepmask = readw(MCFGPIO_PAR_UART); 87 sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK; 88 writew(sepmask, MCFGPIO_PAR_UART); 89 } 90 91 /***************************************************************************/ 92 93 static void __init m527x_fec_init(void) 94 { 95 u16 par; 96 u8 v; 97 98 /* Set multi-function pins to ethernet mode for fec0 */ 99 #if defined(CONFIG_M5271) 100 v = readb(MCFGPIO_PAR_FECI2C); 101 writeb(v | 0xf0, MCFGPIO_PAR_FECI2C); 102 #else 103 par = readw(MCFGPIO_PAR_FECI2C); 104 writew(par | 0xf00, MCFGPIO_PAR_FECI2C); 105 v = readb(MCFGPIO_PAR_FEC0HL); 106 writeb(v | 0xc0, MCFGPIO_PAR_FEC0HL); 107 108 /* Set multi-function pins to ethernet mode for fec1 */ 109 par = readw(MCFGPIO_PAR_FECI2C); 110 writew(par | 0xa0, MCFGPIO_PAR_FECI2C); 111 v = readb(MCFGPIO_PAR_FEC1HL); 112 writeb(v | 0xc0, MCFGPIO_PAR_FEC1HL); 113 #endif 114 } 115 116 /***************************************************************************/ 117 118 void __init config_BSP(char *commandp, int size) 119 { 120 mach_sched_init = hw_timer_init; 121 m527x_uarts_init(); 122 m527x_fec_init(); 123 m527x_qspi_init(); 124 } 125 126 /***************************************************************************/ 127