1 /***************************************************************************/ 2 3 /* 4 * m5272.c -- platform support for ColdFire 5272 based boards 5 * 6 * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) 7 * Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com) 8 */ 9 10 /***************************************************************************/ 11 12 #include <linux/kernel.h> 13 #include <linux/param.h> 14 #include <linux/init.h> 15 #include <linux/io.h> 16 #include <linux/phy.h> 17 #include <linux/phy_fixed.h> 18 #include <asm/machdep.h> 19 #include <asm/coldfire.h> 20 #include <asm/mcfsim.h> 21 #include <asm/mcfuart.h> 22 #include <asm/mcfclk.h> 23 24 /***************************************************************************/ 25 26 /* 27 * Some platforms need software versions of the GPIO data registers. 28 */ 29 unsigned short ppdata; 30 unsigned char ledbank = 0xff; 31 32 /***************************************************************************/ 33 34 DEFINE_CLK(pll, "pll.0", MCF_CLK); 35 DEFINE_CLK(sys, "sys.0", MCF_BUSCLK); 36 DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK); 37 DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK); 38 DEFINE_CLK(mcftmr2, "mcftmr.2", MCF_BUSCLK); 39 DEFINE_CLK(mcftmr3, "mcftmr.3", MCF_BUSCLK); 40 DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK); 41 DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK); 42 DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK); 43 DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK); 44 45 struct clk *mcf_clks[] = { 46 &clk_pll, 47 &clk_sys, 48 &clk_mcftmr0, 49 &clk_mcftmr1, 50 &clk_mcftmr2, 51 &clk_mcftmr3, 52 &clk_mcfuart0, 53 &clk_mcfuart1, 54 &clk_mcfqspi0, 55 &clk_fec0, 56 NULL 57 }; 58 59 /***************************************************************************/ 60 61 static void __init m5272_uarts_init(void) 62 { 63 u32 v; 64 65 /* Enable the output lines for the serial ports */ 66 v = readl(MCFSIM_PBCNT); 67 v = (v & ~0x000000ff) | 0x00000055; 68 writel(v, MCFSIM_PBCNT); 69 70 v = readl(MCFSIM_PDCNT); 71 v = (v & ~0x000003fc) | 0x000002a8; 72 writel(v, MCFSIM_PDCNT); 73 } 74 75 /***************************************************************************/ 76 77 static void m5272_cpu_reset(void) 78 { 79 local_irq_disable(); 80 /* Set watchdog to reset, and enabled */ 81 __raw_writew(0, MCFSIM_WIRR); 82 __raw_writew(1, MCFSIM_WRRR); 83 __raw_writew(0, MCFSIM_WCR); 84 for (;;) 85 /* wait for watchdog to timeout */; 86 } 87 88 /***************************************************************************/ 89 90 void __init config_BSP(char *commandp, int size) 91 { 92 #if defined (CONFIG_MOD5272) 93 /* Set base of device vectors to be 64 */ 94 writeb(0x40, MCFSIM_PIVR); 95 #endif 96 97 #if defined(CONFIG_NETtel) || defined(CONFIG_SCALES) 98 /* Copy command line from FLASH to local buffer... */ 99 memcpy(commandp, (char *) 0xf0004000, size); 100 commandp[size-1] = 0; 101 #elif defined(CONFIG_CANCam) 102 /* Copy command line from FLASH to local buffer... */ 103 memcpy(commandp, (char *) 0xf0010000, size); 104 commandp[size-1] = 0; 105 #endif 106 107 mach_reset = m5272_cpu_reset; 108 mach_sched_init = hw_timer_init; 109 } 110 111 /***************************************************************************/ 112 113 /* 114 * Some 5272 based boards have the FEC ethernet directly connected to 115 * an ethernet switch. In this case we need to use the fixed phy type, 116 * and we need to declare it early in boot. 117 */ 118 static struct fixed_phy_status nettel_fixed_phy_status __initdata = { 119 .link = 1, 120 .speed = 100, 121 .duplex = 0, 122 }; 123 124 /***************************************************************************/ 125 126 static int __init init_BSP(void) 127 { 128 m5272_uarts_init(); 129 fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status, -1); 130 return 0; 131 } 132 133 arch_initcall(init_BSP); 134 135 /***************************************************************************/ 136