1# SPDX-License-Identifier: GPL-2.0 2comment "Machine Types" 3 4if M68KCLASSIC 5 6config AMIGA 7 bool "Amiga support" 8 depends on MMU 9 select MMU_MOTOROLA if MMU 10 help 11 This option enables support for the Amiga series of computers. If 12 you plan to use this kernel on an Amiga, say Y here and browse the 13 material available in <file:Documentation/m68k>; otherwise say N. 14 15config ATARI 16 bool "Atari support" 17 depends on MMU 18 select MMU_MOTOROLA if MMU 19 select HAVE_ARCH_NVRAM_OPS 20 help 21 This option enables support for the 68000-based Atari series of 22 computers (including the TT, Falcon and Medusa). If you plan to use 23 this kernel on an Atari, say Y here and browse the material 24 available in <file:Documentation/m68k>; otherwise say N. 25 26config MAC 27 bool "Macintosh support" 28 depends on MMU 29 select MMU_MOTOROLA if MMU 30 select HAVE_ARCH_NVRAM_OPS 31 help 32 This option enables support for the Apple Macintosh series of 33 computers (yes, there is experimental support now, at least for part 34 of the series). 35 36 Say N unless you're willing to code the remaining necessary support. 37 ;) 38 39config APOLLO 40 bool "Apollo support" 41 depends on MMU 42 select MMU_MOTOROLA if MMU 43 help 44 Say Y here if you want to run Linux on an MC680x0-based Apollo 45 Domain workstation such as the DN3500. 46 47config VME 48 bool "VME (Motorola and BVM) support" 49 depends on MMU 50 select MMU_MOTOROLA if MMU 51 help 52 Say Y here if you want to build a kernel for a 680x0 based VME 53 board. Boards currently supported include Motorola boards MVME147, 54 MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and 55 BVME6000 boards from BVM Ltd are also supported. 56 57config MVME147 58 bool "MVME147 support" 59 depends on MMU 60 depends on VME 61 help 62 Say Y to include support for early Motorola VME boards. This will 63 build a kernel which can run on MVME147 single-board computers. If 64 you select this option you will have to select the appropriate 65 drivers for SCSI, Ethernet and serial ports later on. 66 67config MVME16x 68 bool "MVME162, 166 and 167 support" 69 depends on MMU 70 depends on VME 71 help 72 Say Y to include support for Motorola VME boards. This will build a 73 kernel which can run on MVME162, MVME166, MVME167, MVME172, and 74 MVME177 boards. If you select this option you will have to select 75 the appropriate drivers for SCSI, Ethernet and serial ports later 76 on. 77 78config BVME6000 79 bool "BVME4000 and BVME6000 support" 80 depends on MMU 81 depends on VME 82 help 83 Say Y to include support for VME boards from BVM Ltd. This will 84 build a kernel which can run on BVME4000 and BVME6000 boards. If 85 you select this option you will have to select the appropriate 86 drivers for SCSI, Ethernet and serial ports later on. 87 88config HP300 89 bool "HP9000/300 and HP9000/400 support" 90 depends on MMU 91 select MMU_MOTOROLA if MMU 92 help 93 This option enables support for the HP9000/300 and HP9000/400 series 94 of workstations. Support for these machines is still somewhat 95 experimental. If you plan to try to use the kernel on such a machine 96 say Y here. 97 Everybody else says N. 98 99config SUN3X 100 bool "Sun3x support" 101 depends on MMU 102 select MMU_MOTOROLA if MMU 103 select M68030 104 help 105 This option enables support for the Sun 3x series of workstations. 106 Be warned that this support is very experimental. 107 Note that Sun 3x kernels are not compatible with Sun 3 hardware. 108 General Linux information on the Sun 3x series (now discontinued) 109 is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. 110 111 If you don't want to compile a kernel for a Sun 3x, say N. 112 113config Q40 114 bool "Q40/Q60 support" 115 depends on MMU 116 select MMU_MOTOROLA if MMU 117 help 118 The Q40 is a Motorola 68040-based successor to the Sinclair QL 119 manufactured in Germany. There is an official Q40 home page at 120 <http://www.q40.de/>. This option enables support for the Q40 and 121 Q60. Select your CPU below. For 68LC060 don't forget to enable FPU 122 emulation. 123 124config SUN3 125 bool "Sun3 support" 126 depends on MMU 127 depends on !MMU_MOTOROLA 128 select MMU_SUN3 if MMU 129 select M68020 130 help 131 This option enables support for the Sun 3 series of workstations 132 (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires 133 that all other hardware types must be disabled, as Sun 3 kernels 134 are incompatible with all other m68k targets (including Sun 3x!). 135 136 If you don't want to compile a kernel exclusively for a Sun 3, say N. 137 138endif # M68KCLASSIC 139 140config PILOT 141 bool 142 143config PILOT3 144 bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support" 145 depends on M68328 146 select PILOT 147 help 148 Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII. 149 150config XCOPILOT_BUGS 151 bool "(X)Copilot support" 152 depends on PILOT3 153 help 154 Support the bugs of Xcopilot. 155 156config UCSIMM 157 bool "uCsimm module support" 158 depends on M68EZ328 159 help 160 Support for the Arcturus Networks uCsimm module. 161 162config UCDIMM 163 bool "uDsimm module support" 164 depends on M68VZ328 165 help 166 Support for the Arcturus Networks uDsimm module. 167 168config DRAGEN2 169 bool "DragenEngine II board support" 170 depends on M68VZ328 171 help 172 Support for the DragenEngine II board. 173 174config DIRECT_IO_ACCESS 175 bool "Allow user to access IO directly" 176 depends on (UCSIMM || UCDIMM || DRAGEN2) 177 help 178 Disable the CPU internal registers protection in user mode, 179 to allow a user application to read/write them. 180 181config INIT_LCD 182 bool "Initialize LCD" 183 depends on (UCSIMM || UCDIMM || DRAGEN2) 184 help 185 Initialize the LCD controller of the 68x328 processor. 186 187config MEMORY_RESERVE 188 int "Memory reservation (MiB)" 189 depends on (UCSIMM || UCDIMM) 190 help 191 Reserve certain memory regions on 68x328 based boards. 192 193config ARN5206 194 bool "Arnewsh 5206 board support" 195 depends on M5206 196 help 197 Support for the Arnewsh 5206 board. 198 199config M5206eC3 200 bool "Motorola M5206eC3 board support" 201 depends on M5206e 202 help 203 Support for the Motorola M5206eC3 board. 204 205config ELITE 206 bool "Motorola M5206eLITE board support" 207 depends on M5206e 208 help 209 Support for the Motorola M5206eLITE board. 210 211config M5235EVB 212 bool "Freescale M5235EVB support" 213 depends on M523x 214 help 215 Support for the Freescale M5235EVB board. 216 217config M5249C3 218 bool "Motorola M5249C3 board support" 219 depends on M5249 220 help 221 Support for the Motorola M5249C3 board. 222 223config M5272C3 224 bool "Motorola M5272C3 board support" 225 depends on M5272 226 help 227 Support for the Motorola M5272C3 board. 228 229config WILDFIRE 230 bool "Intec Automation Inc. WildFire board support" 231 depends on M528x 232 help 233 Support for the Intec Automation Inc. WildFire. 234 235config WILDFIREMOD 236 bool "Intec Automation Inc. WildFire module support" 237 depends on M528x 238 help 239 Support for the Intec Automation Inc. WildFire module. 240 241config ARN5307 242 bool "Arnewsh 5307 board support" 243 depends on M5307 244 help 245 Support for the Arnewsh 5307 board. 246 247config M5307C3 248 bool "Motorola M5307C3 board support" 249 depends on M5307 250 help 251 Support for the Motorola M5307C3 board. 252 253config SECUREEDGEMP3 254 bool "SnapGear SecureEdge/MP3 platform support" 255 depends on M5307 256 help 257 Support for the SnapGear SecureEdge/MP3 platform. 258 259config M5407C3 260 bool "Motorola M5407C3 board support" 261 depends on M5407 262 help 263 Support for the Motorola M5407C3 board. 264 265config AMCORE 266 bool "Sysam AMCORE board support" 267 depends on M5307 268 help 269 Support for the Sysam AMCORE open-hardware generic board. 270 271config STMARK2 272 bool "Sysam stmark2 board support" 273 depends on M5441x 274 help 275 Support for the Sysam stmark2 open-hardware generic board. 276 277config FIREBEE 278 bool "FireBee board support" 279 depends on M547x 280 help 281 Support for the FireBee ColdFire 5475 based board. 282 283config CLEOPATRA 284 bool "Feith CLEOPATRA board support" 285 depends on (M5307 || M5407) 286 help 287 Support for the Feith Cleopatra boards. 288 289config CANCam 290 bool "Feith CANCam board support" 291 depends on M5272 292 help 293 Support for the Feith CANCam board. 294 295config SCALES 296 bool "Feith SCALES board support" 297 depends on M5272 298 help 299 Support for the Feith SCALES board. 300 301config NETtel 302 bool "SecureEdge/NETtel board support" 303 depends on (M5206e || M5272 || M5307) 304 help 305 Support for the SnapGear NETtel/SecureEdge/SnapGear boards. 306 307config MOD5272 308 bool "Netburner MOD-5272 board support" 309 depends on M5272 310 help 311 Support for the Netburner MOD-5272 board. 312 313if !MMU || COLDFIRE 314 315comment "Machine Options" 316 317config UBOOT 318 bool "Support for U-Boot command line parameters" 319 help 320 If you say Y here kernel will try to collect command 321 line parameters from the initial u-boot stack. 322 323config 4KSTACKS 324 bool "Use 4Kb for kernel stacks instead of 8Kb" 325 default y 326 help 327 If you say Y here the kernel will use a 4Kb stacksize for the 328 kernel stack attached to each process/thread. This facilitates 329 running more threads on a system and also reduces the pressure 330 on the VM subsystem for higher order allocations. 331 332comment "RAM configuration" 333 334config RAMBASE 335 hex "Address of the base of RAM" 336 default "0" 337 help 338 Define the address that RAM starts at. On many platforms this is 339 0, the base of the address space. And this is the default. Some 340 platforms choose to setup their RAM at other addresses within the 341 processor address space. 342 343config RAMSIZE 344 hex "Size of RAM (in bytes), or 0 for automatic" 345 default "0x400000" 346 help 347 Define the size of the system RAM. If you select 0 then the 348 kernel will try to probe the RAM size at runtime. This is not 349 supported on all CPU types. 350 351config VECTORBASE 352 hex "Address of the base of system vectors" 353 default "0" 354 help 355 Define the address of the system vectors. Commonly this is 356 put at the start of RAM, but it doesn't have to be. On ColdFire 357 platforms this address is programmed into the VBR register, thus 358 actually setting the address to use. 359 360config MBAR 361 hex "Address of the MBAR (internal peripherals)" 362 default "0x10000000" 363 depends on HAVE_MBAR 364 help 365 Define the address of the internal system peripherals. This value 366 is set in the processors MBAR register. This is generally setup by 367 the boot loader, and will not be written by the kernel. By far most 368 ColdFire boards use the default 0x10000000 value, so if unsure then 369 use this. 370 371config IPSBAR 372 hex "Address of the IPSBAR (internal peripherals)" 373 default "0x40000000" 374 depends on HAVE_IPSBAR 375 help 376 Define the address of the internal system peripherals. This value 377 is set in the processors IPSBAR register. This is generally setup by 378 the boot loader, and will not be written by the kernel. By far most 379 ColdFire boards use the default 0x40000000 value, so if unsure then 380 use this. 381 382config KERNELBASE 383 hex "Address of the base of kernel code" 384 default "0x400" 385 help 386 Typically on m68k systems the kernel will not start at the base 387 of RAM, but usually some small offset from it. Define the start 388 address of the kernel here. The most common setup will have the 389 processor vectors at the base of RAM and then the start of the 390 kernel. On some platforms some RAM is reserved for boot loaders 391 and the kernel starts after that. The 0x400 default was based on 392 a system with the RAM based at address 0, and leaving enough room 393 for the theoretical maximum number of 256 vectors. 394 395comment "ROM configuration" 396 397config ROM 398 bool "Specify ROM linker regions" 399 help 400 Define a ROM region for the linker script. This creates a kernel 401 that can be stored in flash, with possibly the text, and data 402 regions being copied out to RAM at startup. 403 404config ROMBASE 405 hex "Address of the base of ROM device" 406 default "0" 407 depends on ROM 408 help 409 Define the address that the ROM region starts at. Some platforms 410 use this to set their chip select region accordingly for the boot 411 device. 412 413config ROMVEC 414 hex "Address of the base of the ROM vectors" 415 default "0" 416 depends on ROM 417 help 418 This is almost always the same as the base of the ROM. Since on all 419 68000 type variants the vectors are at the base of the boot device 420 on system startup. 421 422config ROMSTART 423 hex "Address of the base of system image in ROM" 424 default "0x400" 425 depends on ROM 426 help 427 Define the start address of the system image in ROM. Commonly this 428 is strait after the ROM vectors. 429 430config ROMSIZE 431 hex "Size of the ROM device" 432 default "0x100000" 433 depends on ROM 434 help 435 Size of the ROM device. On some platforms this is used to setup 436 the chip select that controls the boot ROM device. 437 438choice 439 prompt "Kernel executes from" 440 help 441 Choose the memory type that the kernel will be running in. 442 443config RAMKERNEL 444 bool "RAM" 445 help 446 The kernel will be resident in RAM when running. 447 448config ROMKERNEL 449 bool "ROM" 450 help 451 The kernel will be resident in FLASH/ROM when running. This is 452 often referred to as Execute-in-Place (XIP), since the kernel 453 code executes from the position it is stored in the FLASH/ROM. 454 455endchoice 456 457endif 458