1# SPDX-License-Identifier: GPL-2.0 2if MMU 3 4config ARCH_MAY_HAVE_PC_FDC 5 bool 6 depends on BROKEN && (Q40 || SUN3X) 7 default y 8 9menu "Platform devices" 10 11config HEARTBEAT 12 bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40 13 default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300 14 help 15 Use the power-on LED on your machine as a load meter. The exact 16 behavior is platform-dependent, but normally the flash frequency is 17 a hyperbolic function of the 5-minute load average. 18 19# We have a dedicated heartbeat LED. :-) 20config PROC_HARDWARE 21 bool "/proc/hardware support" 22 depends on PROC_FS 23 help 24 Say Y here to support the /proc/hardware file, which gives you 25 access to information about the machine you're running on, 26 including the model, CPU, MMU, clock speed, BogoMIPS rating, 27 and memory size. 28 29config NATFEAT 30 bool "ARAnyM emulator support" 31 depends on ATARI 32 help 33 This option enables support for ARAnyM native features, such as 34 access to a disk image as /dev/hda. 35 36config NFBLOCK 37 tristate "NatFeat block device support" 38 depends on BLOCK && NATFEAT 39 help 40 Say Y to include support for the ARAnyM NatFeat block device 41 which allows direct access to the hard drives without using 42 the hardware emulation. 43 44config NFCON 45 tristate "NatFeat console driver" 46 depends on TTY && NATFEAT 47 help 48 Say Y to include support for the ARAnyM NatFeat console driver 49 which allows the console output to be redirected to the stderr 50 output of ARAnyM. 51 52config NFETH 53 tristate "NatFeat Ethernet support" 54 depends on ETHERNET && NATFEAT 55 help 56 Say Y to include support for the ARAnyM NatFeat network device 57 which will emulate a regular ethernet device while presenting an 58 ethertap device to the host system. 59 60config ATARI_ETHERNAT 61 bool "Atari EtherNAT Ethernet support" 62 depends on ATARI 63 help 64 Say Y to include support for the EtherNAT network adapter for the 65 CT/60 extension port. 66 67 To compile the actual ethernet driver, choose Y or M for the SMC91X 68 option in the network device section; the module will be called smc91x. 69 70config ATARI_ETHERNEC 71 bool "Atari EtherNEC Ethernet support" 72 depends on ATARI_ROM_ISA 73 help 74 Say Y to include support for the EtherNEC network adapter for the 75 ROM port. The driver works by polling instead of interrupts, so it 76 is quite slow. 77 78 This driver also supports the ethernet part of the NetUSBee ROM 79 port combined Ethernet/USB adapter. 80 81 To compile the actual ethernet driver, choose Y or M in for the NE2000 82 option in the network device section; the module will be called ne. 83 84endmenu 85 86menu "Character devices" 87 88config ATARI_DSP56K 89 tristate "Atari DSP56k support" 90 depends on ATARI 91 help 92 If you want to be able to use the DSP56001 in Falcons, say Y. This 93 driver is still experimental, and if you don't know what it is, or 94 if you don't have this processor, just say N. 95 96 To compile this driver as a module, choose M here. 97 98config AMIGA_BUILTIN_SERIAL 99 tristate "Amiga builtin serial support" 100 depends on AMIGA && TTY 101 help 102 If you want to use your Amiga's built-in serial port in Linux, 103 answer Y. 104 105 To compile this driver as a module, choose M here. 106 107config HPDCA 108 tristate "HP DCA serial support" 109 depends on DIO && SERIAL_8250 110 help 111 If you want to use the internal "DCA" serial ports on an HP300 112 machine, say Y here. 113 114config HPAPCI 115 tristate "HP APCI serial support" 116 depends on HP300 && SERIAL_8250 117 help 118 If you want to use the internal "APCI" serial ports on an HP400 119 machine, say Y here. 120 121config SERIAL_CONSOLE 122 bool "Support for serial port console" 123 depends on AMIGA_BUILTIN_SERIAL=y 124 help 125 If you say Y here, it will be possible to use a serial port as the 126 system console (the system console is the device which receives all 127 kernel messages and warnings and which allows logins in single user 128 mode). This could be useful if some terminal or printer is connected 129 to that serial port. 130 131 Even if you say Y here, the currently visible virtual console 132 (/dev/tty0) will still be used as the system console by default, but 133 you can alter that using a kernel command line option such as 134 "console=ttyS1". (Try "man bootparam" or see the documentation of 135 your boot loader about how to pass options to the kernel at boot 136 time.) 137 138 If you don't have a graphical console and you say Y here, the 139 kernel will automatically use the first serial line, /dev/ttyS0, as 140 system console. 141 142 If unsure, say N. 143 144endmenu 145 146endif 147