1 /* 2 * Based on arch/arm/mm/init.c 3 * 4 * Copyright (C) 1995-2005 Russell King 5 * Copyright (C) 2012 ARM Ltd. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License version 2 as 9 * published by the Free Software Foundation. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program. If not, see <http://www.gnu.org/licenses/>. 18 */ 19 20 #include <linux/kernel.h> 21 #include <linux/export.h> 22 #include <linux/errno.h> 23 #include <linux/swap.h> 24 #include <linux/init.h> 25 #include <linux/bootmem.h> 26 #include <linux/cache.h> 27 #include <linux/mman.h> 28 #include <linux/nodemask.h> 29 #include <linux/initrd.h> 30 #include <linux/gfp.h> 31 #include <linux/memblock.h> 32 #include <linux/sort.h> 33 #include <linux/of_fdt.h> 34 #include <linux/dma-mapping.h> 35 #include <linux/dma-contiguous.h> 36 #include <linux/efi.h> 37 #include <linux/swiotlb.h> 38 #include <linux/vmalloc.h> 39 40 #include <asm/boot.h> 41 #include <asm/fixmap.h> 42 #include <asm/kasan.h> 43 #include <asm/kernel-pgtable.h> 44 #include <asm/memory.h> 45 #include <asm/numa.h> 46 #include <asm/sections.h> 47 #include <asm/setup.h> 48 #include <asm/sizes.h> 49 #include <asm/tlb.h> 50 #include <asm/alternative.h> 51 52 /* 53 * We need to be able to catch inadvertent references to memstart_addr 54 * that occur (potentially in generic code) before arm64_memblock_init() 55 * executes, which assigns it its actual value. So use a default value 56 * that cannot be mistaken for a real physical address. 57 */ 58 s64 memstart_addr __ro_after_init = -1; 59 phys_addr_t arm64_dma_phys_limit __ro_after_init; 60 61 #ifdef CONFIG_BLK_DEV_INITRD 62 static int __init early_initrd(char *p) 63 { 64 unsigned long start, size; 65 char *endp; 66 67 start = memparse(p, &endp); 68 if (*endp == ',') { 69 size = memparse(endp + 1, NULL); 70 71 initrd_start = start; 72 initrd_end = start + size; 73 } 74 return 0; 75 } 76 early_param("initrd", early_initrd); 77 #endif 78 79 /* 80 * Return the maximum physical address for ZONE_DMA (DMA_BIT_MASK(32)). It 81 * currently assumes that for memory starting above 4G, 32-bit devices will 82 * use a DMA offset. 83 */ 84 static phys_addr_t __init max_zone_dma_phys(void) 85 { 86 phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32); 87 return min(offset + (1ULL << 32), memblock_end_of_DRAM()); 88 } 89 90 #ifdef CONFIG_NUMA 91 92 static void __init zone_sizes_init(unsigned long min, unsigned long max) 93 { 94 unsigned long max_zone_pfns[MAX_NR_ZONES] = {0}; 95 96 if (IS_ENABLED(CONFIG_ZONE_DMA)) 97 max_zone_pfns[ZONE_DMA] = PFN_DOWN(max_zone_dma_phys()); 98 max_zone_pfns[ZONE_NORMAL] = max; 99 100 free_area_init_nodes(max_zone_pfns); 101 } 102 103 #else 104 105 static void __init zone_sizes_init(unsigned long min, unsigned long max) 106 { 107 struct memblock_region *reg; 108 unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; 109 unsigned long max_dma = min; 110 111 memset(zone_size, 0, sizeof(zone_size)); 112 113 /* 4GB maximum for 32-bit only capable devices */ 114 #ifdef CONFIG_ZONE_DMA 115 max_dma = PFN_DOWN(arm64_dma_phys_limit); 116 zone_size[ZONE_DMA] = max_dma - min; 117 #endif 118 zone_size[ZONE_NORMAL] = max - max_dma; 119 120 memcpy(zhole_size, zone_size, sizeof(zhole_size)); 121 122 for_each_memblock(memory, reg) { 123 unsigned long start = memblock_region_memory_base_pfn(reg); 124 unsigned long end = memblock_region_memory_end_pfn(reg); 125 126 if (start >= max) 127 continue; 128 129 #ifdef CONFIG_ZONE_DMA 130 if (start < max_dma) { 131 unsigned long dma_end = min(end, max_dma); 132 zhole_size[ZONE_DMA] -= dma_end - start; 133 } 134 #endif 135 if (end > max_dma) { 136 unsigned long normal_end = min(end, max); 137 unsigned long normal_start = max(start, max_dma); 138 zhole_size[ZONE_NORMAL] -= normal_end - normal_start; 139 } 140 } 141 142 free_area_init_node(0, zone_size, min, zhole_size); 143 } 144 145 #endif /* CONFIG_NUMA */ 146 147 #ifdef CONFIG_HAVE_ARCH_PFN_VALID 148 int pfn_valid(unsigned long pfn) 149 { 150 return memblock_is_map_memory(pfn << PAGE_SHIFT); 151 } 152 EXPORT_SYMBOL(pfn_valid); 153 #endif 154 155 #ifndef CONFIG_SPARSEMEM 156 static void __init arm64_memory_present(void) 157 { 158 } 159 #else 160 static void __init arm64_memory_present(void) 161 { 162 struct memblock_region *reg; 163 164 for_each_memblock(memory, reg) { 165 int nid = memblock_get_region_node(reg); 166 167 memory_present(nid, memblock_region_memory_base_pfn(reg), 168 memblock_region_memory_end_pfn(reg)); 169 } 170 } 171 #endif 172 173 static phys_addr_t memory_limit = (phys_addr_t)ULLONG_MAX; 174 175 /* 176 * Limit the memory size that was specified via FDT. 177 */ 178 static int __init early_mem(char *p) 179 { 180 if (!p) 181 return 1; 182 183 memory_limit = memparse(p, &p) & PAGE_MASK; 184 pr_notice("Memory limited to %lldMB\n", memory_limit >> 20); 185 186 return 0; 187 } 188 early_param("mem", early_mem); 189 190 void __init arm64_memblock_init(void) 191 { 192 const s64 linear_region_size = -(s64)PAGE_OFFSET; 193 194 /* 195 * Ensure that the linear region takes up exactly half of the kernel 196 * virtual address space. This way, we can distinguish a linear address 197 * from a kernel/module/vmalloc address by testing a single bit. 198 */ 199 BUILD_BUG_ON(linear_region_size != BIT(VA_BITS - 1)); 200 201 /* 202 * Select a suitable value for the base of physical memory. 203 */ 204 memstart_addr = round_down(memblock_start_of_DRAM(), 205 ARM64_MEMSTART_ALIGN); 206 207 /* 208 * Remove the memory that we will not be able to cover with the 209 * linear mapping. Take care not to clip the kernel which may be 210 * high in memory. 211 */ 212 memblock_remove(max_t(u64, memstart_addr + linear_region_size, __pa(_end)), 213 ULLONG_MAX); 214 if (memstart_addr + linear_region_size < memblock_end_of_DRAM()) { 215 /* ensure that memstart_addr remains sufficiently aligned */ 216 memstart_addr = round_up(memblock_end_of_DRAM() - linear_region_size, 217 ARM64_MEMSTART_ALIGN); 218 memblock_remove(0, memstart_addr); 219 } 220 221 /* 222 * Apply the memory limit if it was set. Since the kernel may be loaded 223 * high up in memory, add back the kernel region that must be accessible 224 * via the linear mapping. 225 */ 226 if (memory_limit != (phys_addr_t)ULLONG_MAX) { 227 memblock_mem_limit_remove_map(memory_limit); 228 memblock_add(__pa(_text), (u64)(_end - _text)); 229 } 230 231 if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && initrd_start) { 232 /* 233 * Add back the memory we just removed if it results in the 234 * initrd to become inaccessible via the linear mapping. 235 * Otherwise, this is a no-op 236 */ 237 u64 base = initrd_start & PAGE_MASK; 238 u64 size = PAGE_ALIGN(initrd_end) - base; 239 240 /* 241 * We can only add back the initrd memory if we don't end up 242 * with more memory than we can address via the linear mapping. 243 * It is up to the bootloader to position the kernel and the 244 * initrd reasonably close to each other (i.e., within 32 GB of 245 * each other) so that all granule/#levels combinations can 246 * always access both. 247 */ 248 if (WARN(base < memblock_start_of_DRAM() || 249 base + size > memblock_start_of_DRAM() + 250 linear_region_size, 251 "initrd not fully accessible via the linear mapping -- please check your bootloader ...\n")) { 252 initrd_start = 0; 253 } else { 254 memblock_remove(base, size); /* clear MEMBLOCK_ flags */ 255 memblock_add(base, size); 256 memblock_reserve(base, size); 257 } 258 } 259 260 if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) { 261 extern u16 memstart_offset_seed; 262 u64 range = linear_region_size - 263 (memblock_end_of_DRAM() - memblock_start_of_DRAM()); 264 265 /* 266 * If the size of the linear region exceeds, by a sufficient 267 * margin, the size of the region that the available physical 268 * memory spans, randomize the linear region as well. 269 */ 270 if (memstart_offset_seed > 0 && range >= ARM64_MEMSTART_ALIGN) { 271 range = range / ARM64_MEMSTART_ALIGN + 1; 272 memstart_addr -= ARM64_MEMSTART_ALIGN * 273 ((range * memstart_offset_seed) >> 16); 274 } 275 } 276 277 /* 278 * Register the kernel text, kernel data, initrd, and initial 279 * pagetables with memblock. 280 */ 281 memblock_reserve(__pa(_text), _end - _text); 282 #ifdef CONFIG_BLK_DEV_INITRD 283 if (initrd_start) { 284 memblock_reserve(initrd_start, initrd_end - initrd_start); 285 286 /* the generic initrd code expects virtual addresses */ 287 initrd_start = __phys_to_virt(initrd_start); 288 initrd_end = __phys_to_virt(initrd_end); 289 } 290 #endif 291 292 early_init_fdt_scan_reserved_mem(); 293 294 /* 4GB maximum for 32-bit only capable devices */ 295 if (IS_ENABLED(CONFIG_ZONE_DMA)) 296 arm64_dma_phys_limit = max_zone_dma_phys(); 297 else 298 arm64_dma_phys_limit = PHYS_MASK + 1; 299 dma_contiguous_reserve(arm64_dma_phys_limit); 300 301 memblock_allow_resize(); 302 } 303 304 void __init bootmem_init(void) 305 { 306 unsigned long min, max; 307 308 min = PFN_UP(memblock_start_of_DRAM()); 309 max = PFN_DOWN(memblock_end_of_DRAM()); 310 311 early_memtest(min << PAGE_SHIFT, max << PAGE_SHIFT); 312 313 max_pfn = max_low_pfn = max; 314 315 arm64_numa_init(); 316 /* 317 * Sparsemem tries to allocate bootmem in memory_present(), so must be 318 * done after the fixed reservations. 319 */ 320 arm64_memory_present(); 321 322 sparse_init(); 323 zone_sizes_init(min, max); 324 325 high_memory = __va((max << PAGE_SHIFT) - 1) + 1; 326 memblock_dump_all(); 327 } 328 329 #ifndef CONFIG_SPARSEMEM_VMEMMAP 330 static inline void free_memmap(unsigned long start_pfn, unsigned long end_pfn) 331 { 332 struct page *start_pg, *end_pg; 333 unsigned long pg, pgend; 334 335 /* 336 * Convert start_pfn/end_pfn to a struct page pointer. 337 */ 338 start_pg = pfn_to_page(start_pfn - 1) + 1; 339 end_pg = pfn_to_page(end_pfn - 1) + 1; 340 341 /* 342 * Convert to physical addresses, and round start upwards and end 343 * downwards. 344 */ 345 pg = (unsigned long)PAGE_ALIGN(__pa(start_pg)); 346 pgend = (unsigned long)__pa(end_pg) & PAGE_MASK; 347 348 /* 349 * If there are free pages between these, free the section of the 350 * memmap array. 351 */ 352 if (pg < pgend) 353 free_bootmem(pg, pgend - pg); 354 } 355 356 /* 357 * The mem_map array can get very big. Free the unused area of the memory map. 358 */ 359 static void __init free_unused_memmap(void) 360 { 361 unsigned long start, prev_end = 0; 362 struct memblock_region *reg; 363 364 for_each_memblock(memory, reg) { 365 start = __phys_to_pfn(reg->base); 366 367 #ifdef CONFIG_SPARSEMEM 368 /* 369 * Take care not to free memmap entries that don't exist due 370 * to SPARSEMEM sections which aren't present. 371 */ 372 start = min(start, ALIGN(prev_end, PAGES_PER_SECTION)); 373 #endif 374 /* 375 * If we had a previous bank, and there is a space between the 376 * current bank and the previous, free it. 377 */ 378 if (prev_end && prev_end < start) 379 free_memmap(prev_end, start); 380 381 /* 382 * Align up here since the VM subsystem insists that the 383 * memmap entries are valid from the bank end aligned to 384 * MAX_ORDER_NR_PAGES. 385 */ 386 prev_end = ALIGN(__phys_to_pfn(reg->base + reg->size), 387 MAX_ORDER_NR_PAGES); 388 } 389 390 #ifdef CONFIG_SPARSEMEM 391 if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION)) 392 free_memmap(prev_end, ALIGN(prev_end, PAGES_PER_SECTION)); 393 #endif 394 } 395 #endif /* !CONFIG_SPARSEMEM_VMEMMAP */ 396 397 /* 398 * mem_init() marks the free areas in the mem_map and tells us how much memory 399 * is free. This is done after various parts of the system have claimed their 400 * memory after the kernel image. 401 */ 402 void __init mem_init(void) 403 { 404 if (swiotlb_force || max_pfn > (arm64_dma_phys_limit >> PAGE_SHIFT)) 405 swiotlb_init(1); 406 407 set_max_mapnr(pfn_to_page(max_pfn) - mem_map); 408 409 #ifndef CONFIG_SPARSEMEM_VMEMMAP 410 free_unused_memmap(); 411 #endif 412 /* this will put all unused low memory onto the freelists */ 413 free_all_bootmem(); 414 415 mem_init_print_info(NULL); 416 417 #define MLK(b, t) b, t, ((t) - (b)) >> 10 418 #define MLM(b, t) b, t, ((t) - (b)) >> 20 419 #define MLG(b, t) b, t, ((t) - (b)) >> 30 420 #define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K) 421 422 pr_notice("Virtual kernel memory layout:\n"); 423 #ifdef CONFIG_KASAN 424 pr_notice(" kasan : 0x%16lx - 0x%16lx (%6ld GB)\n", 425 MLG(KASAN_SHADOW_START, KASAN_SHADOW_END)); 426 #endif 427 pr_notice(" modules : 0x%16lx - 0x%16lx (%6ld MB)\n", 428 MLM(MODULES_VADDR, MODULES_END)); 429 pr_notice(" vmalloc : 0x%16lx - 0x%16lx (%6ld GB)\n", 430 MLG(VMALLOC_START, VMALLOC_END)); 431 pr_notice(" .text : 0x%p" " - 0x%p" " (%6ld KB)\n", 432 MLK_ROUNDUP(_text, _etext)); 433 pr_notice(" .rodata : 0x%p" " - 0x%p" " (%6ld KB)\n", 434 MLK_ROUNDUP(__start_rodata, __init_begin)); 435 pr_notice(" .init : 0x%p" " - 0x%p" " (%6ld KB)\n", 436 MLK_ROUNDUP(__init_begin, __init_end)); 437 pr_notice(" .data : 0x%p" " - 0x%p" " (%6ld KB)\n", 438 MLK_ROUNDUP(_sdata, _edata)); 439 pr_notice(" .bss : 0x%p" " - 0x%p" " (%6ld KB)\n", 440 MLK_ROUNDUP(__bss_start, __bss_stop)); 441 pr_notice(" fixed : 0x%16lx - 0x%16lx (%6ld KB)\n", 442 MLK(FIXADDR_START, FIXADDR_TOP)); 443 pr_notice(" PCI I/O : 0x%16lx - 0x%16lx (%6ld MB)\n", 444 MLM(PCI_IO_START, PCI_IO_END)); 445 #ifdef CONFIG_SPARSEMEM_VMEMMAP 446 pr_notice(" vmemmap : 0x%16lx - 0x%16lx (%6ld GB maximum)\n", 447 MLG(VMEMMAP_START, VMEMMAP_START + VMEMMAP_SIZE)); 448 pr_notice(" 0x%16lx - 0x%16lx (%6ld MB actual)\n", 449 MLM((unsigned long)phys_to_page(memblock_start_of_DRAM()), 450 (unsigned long)virt_to_page(high_memory))); 451 #endif 452 pr_notice(" memory : 0x%16lx - 0x%16lx (%6ld MB)\n", 453 MLM(__phys_to_virt(memblock_start_of_DRAM()), 454 (unsigned long)high_memory)); 455 456 #undef MLK 457 #undef MLM 458 #undef MLK_ROUNDUP 459 460 /* 461 * Check boundaries twice: Some fundamental inconsistencies can be 462 * detected at build time already. 463 */ 464 #ifdef CONFIG_COMPAT 465 BUILD_BUG_ON(TASK_SIZE_32 > TASK_SIZE_64); 466 #endif 467 468 /* 469 * Make sure we chose the upper bound of sizeof(struct page) 470 * correctly. 471 */ 472 BUILD_BUG_ON(sizeof(struct page) > (1 << STRUCT_PAGE_MAX_SHIFT)); 473 474 if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) { 475 extern int sysctl_overcommit_memory; 476 /* 477 * On a machine this small we won't get anywhere without 478 * overcommit, so turn it on by default. 479 */ 480 sysctl_overcommit_memory = OVERCOMMIT_ALWAYS; 481 } 482 } 483 484 void free_initmem(void) 485 { 486 free_reserved_area(__va(__pa(__init_begin)), __va(__pa(__init_end)), 487 0, "unused kernel"); 488 /* 489 * Unmap the __init region but leave the VM area in place. This 490 * prevents the region from being reused for kernel modules, which 491 * is not supported by kallsyms. 492 */ 493 unmap_kernel_range((u64)__init_begin, (u64)(__init_end - __init_begin)); 494 } 495 496 #ifdef CONFIG_BLK_DEV_INITRD 497 498 static int keep_initrd __initdata; 499 500 void __init free_initrd_mem(unsigned long start, unsigned long end) 501 { 502 if (!keep_initrd) 503 free_reserved_area((void *)start, (void *)end, 0, "initrd"); 504 } 505 506 static int __init keepinitrd_setup(char *__unused) 507 { 508 keep_initrd = 1; 509 return 1; 510 } 511 512 __setup("keepinitrd", keepinitrd_setup); 513 #endif 514 515 /* 516 * Dump out memory limit information on panic. 517 */ 518 static int dump_mem_limit(struct notifier_block *self, unsigned long v, void *p) 519 { 520 if (memory_limit != (phys_addr_t)ULLONG_MAX) { 521 pr_emerg("Memory Limit: %llu MB\n", memory_limit >> 20); 522 } else { 523 pr_emerg("Memory Limit: none\n"); 524 } 525 return 0; 526 } 527 528 static struct notifier_block mem_limit_notifier = { 529 .notifier_call = dump_mem_limit, 530 }; 531 532 static int __init register_mem_limit_dumper(void) 533 { 534 atomic_notifier_chain_register(&panic_notifier_list, 535 &mem_limit_notifier); 536 return 0; 537 } 538 __initcall(register_mem_limit_dumper); 539