xref: /linux/arch/arm64/mm/init.c (revision 1634b7adcc5bef645b3666fdd564e5952a9e24e0)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Based on arch/arm/mm/init.c
4  *
5  * Copyright (C) 1995-2005 Russell King
6  * Copyright (C) 2012 ARM Ltd.
7  */
8 
9 #include <linux/kernel.h>
10 #include <linux/export.h>
11 #include <linux/errno.h>
12 #include <linux/swap.h>
13 #include <linux/init.h>
14 #include <linux/cache.h>
15 #include <linux/mman.h>
16 #include <linux/nodemask.h>
17 #include <linux/initrd.h>
18 #include <linux/gfp.h>
19 #include <linux/memblock.h>
20 #include <linux/sort.h>
21 #include <linux/of.h>
22 #include <linux/of_fdt.h>
23 #include <linux/dma-direct.h>
24 #include <linux/dma-map-ops.h>
25 #include <linux/efi.h>
26 #include <linux/swiotlb.h>
27 #include <linux/vmalloc.h>
28 #include <linux/mm.h>
29 #include <linux/kexec.h>
30 #include <linux/crash_dump.h>
31 #include <linux/hugetlb.h>
32 #include <linux/acpi_iort.h>
33 #include <linux/kmemleak.h>
34 
35 #include <asm/boot.h>
36 #include <asm/fixmap.h>
37 #include <asm/kasan.h>
38 #include <asm/kernel-pgtable.h>
39 #include <asm/kvm_host.h>
40 #include <asm/memory.h>
41 #include <asm/numa.h>
42 #include <asm/sections.h>
43 #include <asm/setup.h>
44 #include <linux/sizes.h>
45 #include <asm/tlb.h>
46 #include <asm/alternative.h>
47 #include <asm/xen/swiotlb-xen.h>
48 
49 /*
50  * We need to be able to catch inadvertent references to memstart_addr
51  * that occur (potentially in generic code) before arm64_memblock_init()
52  * executes, which assigns it its actual value. So use a default value
53  * that cannot be mistaken for a real physical address.
54  */
55 s64 memstart_addr __ro_after_init = -1;
56 EXPORT_SYMBOL(memstart_addr);
57 
58 /*
59  * If the corresponding config options are enabled, we create both ZONE_DMA
60  * and ZONE_DMA32. By default ZONE_DMA covers the 32-bit addressable memory
61  * unless restricted on specific platforms (e.g. 30-bit on Raspberry Pi 4).
62  * In such case, ZONE_DMA32 covers the rest of the 32-bit addressable memory,
63  * otherwise it is empty.
64  *
65  * Memory reservation for crash kernel either done early or deferred
66  * depending on DMA memory zones configs (ZONE_DMA) --
67  *
68  * In absence of ZONE_DMA configs arm64_dma_phys_limit initialized
69  * here instead of max_zone_phys().  This lets early reservation of
70  * crash kernel memory which has a dependency on arm64_dma_phys_limit.
71  * Reserving memory early for crash kernel allows linear creation of block
72  * mappings (greater than page-granularity) for all the memory bank rangs.
73  * In this scheme a comparatively quicker boot is observed.
74  *
75  * If ZONE_DMA configs are defined, crash kernel memory reservation
76  * is delayed until DMA zone memory range size initialization performed in
77  * zone_sizes_init().  The defer is necessary to steer clear of DMA zone
78  * memory range to avoid overlap allocation.  So crash kernel memory boundaries
79  * are not known when mapping all bank memory ranges, which otherwise means
80  * not possible to exclude crash kernel range from creating block mappings
81  * so page-granularity mappings are created for the entire memory range.
82  * Hence a slightly slower boot is observed.
83  *
84  * Note: Page-granularity mappings are necessary for crash kernel memory
85  * range for shrinking its size via /sys/kernel/kexec_crash_size interface.
86  */
87 #if IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32)
88 phys_addr_t __ro_after_init arm64_dma_phys_limit;
89 #else
90 phys_addr_t __ro_after_init arm64_dma_phys_limit = PHYS_MASK + 1;
91 #endif
92 
93 /* Current arm64 boot protocol requires 2MB alignment */
94 #define CRASH_ALIGN			SZ_2M
95 
96 #define CRASH_ADDR_LOW_MAX		arm64_dma_phys_limit
97 #define CRASH_ADDR_HIGH_MAX		(PHYS_MASK + 1)
98 
99 #define DEFAULT_CRASH_KERNEL_LOW_SIZE	(128UL << 20)
100 
101 static int __init reserve_crashkernel_low(unsigned long long low_size)
102 {
103 	unsigned long long low_base;
104 
105 	low_base = memblock_phys_alloc_range(low_size, CRASH_ALIGN, 0, CRASH_ADDR_LOW_MAX);
106 	if (!low_base) {
107 		pr_err("cannot allocate crashkernel low memory (size:0x%llx).\n", low_size);
108 		return -ENOMEM;
109 	}
110 
111 	pr_info("crashkernel low memory reserved: 0x%08llx - 0x%08llx (%lld MB)\n",
112 		low_base, low_base + low_size, low_size >> 20);
113 
114 	crashk_low_res.start = low_base;
115 	crashk_low_res.end   = low_base + low_size - 1;
116 	insert_resource(&iomem_resource, &crashk_low_res);
117 
118 	return 0;
119 }
120 
121 /*
122  * reserve_crashkernel() - reserves memory for crash kernel
123  *
124  * This function reserves memory area given in "crashkernel=" kernel command
125  * line parameter. The memory reserved is used by dump capture kernel when
126  * primary kernel is crashing.
127  */
128 static void __init reserve_crashkernel(void)
129 {
130 	unsigned long long crash_base, crash_size;
131 	unsigned long long crash_low_size = 0;
132 	unsigned long long crash_max = CRASH_ADDR_LOW_MAX;
133 	char *cmdline = boot_command_line;
134 	int ret;
135 	bool fixed_base = false;
136 
137 	if (!IS_ENABLED(CONFIG_KEXEC_CORE))
138 		return;
139 
140 	/* crashkernel=X[@offset] */
141 	ret = parse_crashkernel(cmdline, memblock_phys_mem_size(),
142 				&crash_size, &crash_base);
143 	if (ret == -ENOENT) {
144 		ret = parse_crashkernel_high(cmdline, 0, &crash_size, &crash_base);
145 		if (ret || !crash_size)
146 			return;
147 
148 		/*
149 		 * crashkernel=Y,low can be specified or not, but invalid value
150 		 * is not allowed.
151 		 */
152 		ret = parse_crashkernel_low(cmdline, 0, &crash_low_size, &crash_base);
153 		if (ret == -ENOENT)
154 			crash_low_size = DEFAULT_CRASH_KERNEL_LOW_SIZE;
155 		else if (ret)
156 			return;
157 
158 		crash_max = CRASH_ADDR_HIGH_MAX;
159 	} else if (ret || !crash_size) {
160 		/* The specified value is invalid */
161 		return;
162 	}
163 
164 	crash_size = PAGE_ALIGN(crash_size);
165 
166 	/* User specifies base address explicitly. */
167 	if (crash_base) {
168 		fixed_base = true;
169 		crash_max = crash_base + crash_size;
170 	}
171 
172 retry:
173 	crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN,
174 					       crash_base, crash_max);
175 	if (!crash_base) {
176 		/*
177 		 * If the first attempt was for low memory, fall back to
178 		 * high memory, the minimum required low memory will be
179 		 * reserved later.
180 		 */
181 		if (!fixed_base && (crash_max == CRASH_ADDR_LOW_MAX)) {
182 			crash_max = CRASH_ADDR_HIGH_MAX;
183 			crash_low_size = DEFAULT_CRASH_KERNEL_LOW_SIZE;
184 			goto retry;
185 		}
186 
187 		pr_warn("cannot allocate crashkernel (size:0x%llx)\n",
188 			crash_size);
189 		return;
190 	}
191 
192 	if ((crash_base > CRASH_ADDR_LOW_MAX - crash_low_size) &&
193 	     crash_low_size && reserve_crashkernel_low(crash_low_size)) {
194 		memblock_phys_free(crash_base, crash_size);
195 		return;
196 	}
197 
198 	pr_info("crashkernel reserved: 0x%016llx - 0x%016llx (%lld MB)\n",
199 		crash_base, crash_base + crash_size, crash_size >> 20);
200 
201 	/*
202 	 * The crashkernel memory will be removed from the kernel linear
203 	 * map. Inform kmemleak so that it won't try to access it.
204 	 */
205 	kmemleak_ignore_phys(crash_base);
206 	if (crashk_low_res.end)
207 		kmemleak_ignore_phys(crashk_low_res.start);
208 
209 	crashk_res.start = crash_base;
210 	crashk_res.end = crash_base + crash_size - 1;
211 	insert_resource(&iomem_resource, &crashk_res);
212 }
213 
214 /*
215  * Return the maximum physical address for a zone accessible by the given bits
216  * limit. If DRAM starts above 32-bit, expand the zone to the maximum
217  * available memory, otherwise cap it at 32-bit.
218  */
219 static phys_addr_t __init max_zone_phys(unsigned int zone_bits)
220 {
221 	phys_addr_t zone_mask = DMA_BIT_MASK(zone_bits);
222 	phys_addr_t phys_start = memblock_start_of_DRAM();
223 
224 	if (phys_start > U32_MAX)
225 		zone_mask = PHYS_ADDR_MAX;
226 	else if (phys_start > zone_mask)
227 		zone_mask = U32_MAX;
228 
229 	return min(zone_mask, memblock_end_of_DRAM() - 1) + 1;
230 }
231 
232 static void __init zone_sizes_init(void)
233 {
234 	unsigned long max_zone_pfns[MAX_NR_ZONES]  = {0};
235 	unsigned int __maybe_unused acpi_zone_dma_bits;
236 	unsigned int __maybe_unused dt_zone_dma_bits;
237 	phys_addr_t __maybe_unused dma32_phys_limit = max_zone_phys(32);
238 
239 #ifdef CONFIG_ZONE_DMA
240 	acpi_zone_dma_bits = fls64(acpi_iort_dma_get_max_cpu_address());
241 	dt_zone_dma_bits = fls64(of_dma_get_max_cpu_address(NULL));
242 	zone_dma_bits = min3(32U, dt_zone_dma_bits, acpi_zone_dma_bits);
243 	arm64_dma_phys_limit = max_zone_phys(zone_dma_bits);
244 	max_zone_pfns[ZONE_DMA] = PFN_DOWN(arm64_dma_phys_limit);
245 #endif
246 #ifdef CONFIG_ZONE_DMA32
247 	max_zone_pfns[ZONE_DMA32] = PFN_DOWN(dma32_phys_limit);
248 	if (!arm64_dma_phys_limit)
249 		arm64_dma_phys_limit = dma32_phys_limit;
250 #endif
251 	max_zone_pfns[ZONE_NORMAL] = max_pfn;
252 
253 	free_area_init(max_zone_pfns);
254 }
255 
256 int pfn_is_map_memory(unsigned long pfn)
257 {
258 	phys_addr_t addr = PFN_PHYS(pfn);
259 
260 	/* avoid false positives for bogus PFNs, see comment in pfn_valid() */
261 	if (PHYS_PFN(addr) != pfn)
262 		return 0;
263 
264 	return memblock_is_map_memory(addr);
265 }
266 EXPORT_SYMBOL(pfn_is_map_memory);
267 
268 static phys_addr_t memory_limit __ro_after_init = PHYS_ADDR_MAX;
269 
270 /*
271  * Limit the memory size that was specified via FDT.
272  */
273 static int __init early_mem(char *p)
274 {
275 	if (!p)
276 		return 1;
277 
278 	memory_limit = memparse(p, &p) & PAGE_MASK;
279 	pr_notice("Memory limited to %lldMB\n", memory_limit >> 20);
280 
281 	return 0;
282 }
283 early_param("mem", early_mem);
284 
285 void __init arm64_memblock_init(void)
286 {
287 	s64 linear_region_size = PAGE_END - _PAGE_OFFSET(vabits_actual);
288 
289 	/*
290 	 * Corner case: 52-bit VA capable systems running KVM in nVHE mode may
291 	 * be limited in their ability to support a linear map that exceeds 51
292 	 * bits of VA space, depending on the placement of the ID map. Given
293 	 * that the placement of the ID map may be randomized, let's simply
294 	 * limit the kernel's linear map to 51 bits as well if we detect this
295 	 * configuration.
296 	 */
297 	if (IS_ENABLED(CONFIG_KVM) && vabits_actual == 52 &&
298 	    is_hyp_mode_available() && !is_kernel_in_hyp_mode()) {
299 		pr_info("Capping linear region to 51 bits for KVM in nVHE mode on LVA capable hardware.\n");
300 		linear_region_size = min_t(u64, linear_region_size, BIT(51));
301 	}
302 
303 	/* Remove memory above our supported physical address size */
304 	memblock_remove(1ULL << PHYS_MASK_SHIFT, ULLONG_MAX);
305 
306 	/*
307 	 * Select a suitable value for the base of physical memory.
308 	 */
309 	memstart_addr = round_down(memblock_start_of_DRAM(),
310 				   ARM64_MEMSTART_ALIGN);
311 
312 	if ((memblock_end_of_DRAM() - memstart_addr) > linear_region_size)
313 		pr_warn("Memory doesn't fit in the linear mapping, VA_BITS too small\n");
314 
315 	/*
316 	 * Remove the memory that we will not be able to cover with the
317 	 * linear mapping. Take care not to clip the kernel which may be
318 	 * high in memory.
319 	 */
320 	memblock_remove(max_t(u64, memstart_addr + linear_region_size,
321 			__pa_symbol(_end)), ULLONG_MAX);
322 	if (memstart_addr + linear_region_size < memblock_end_of_DRAM()) {
323 		/* ensure that memstart_addr remains sufficiently aligned */
324 		memstart_addr = round_up(memblock_end_of_DRAM() - linear_region_size,
325 					 ARM64_MEMSTART_ALIGN);
326 		memblock_remove(0, memstart_addr);
327 	}
328 
329 	/*
330 	 * If we are running with a 52-bit kernel VA config on a system that
331 	 * does not support it, we have to place the available physical
332 	 * memory in the 48-bit addressable part of the linear region, i.e.,
333 	 * we have to move it upward. Since memstart_addr represents the
334 	 * physical address of PAGE_OFFSET, we have to *subtract* from it.
335 	 */
336 	if (IS_ENABLED(CONFIG_ARM64_VA_BITS_52) && (vabits_actual != 52))
337 		memstart_addr -= _PAGE_OFFSET(48) - _PAGE_OFFSET(52);
338 
339 	/*
340 	 * Apply the memory limit if it was set. Since the kernel may be loaded
341 	 * high up in memory, add back the kernel region that must be accessible
342 	 * via the linear mapping.
343 	 */
344 	if (memory_limit != PHYS_ADDR_MAX) {
345 		memblock_mem_limit_remove_map(memory_limit);
346 		memblock_add(__pa_symbol(_text), (u64)(_end - _text));
347 	}
348 
349 	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && phys_initrd_size) {
350 		/*
351 		 * Add back the memory we just removed if it results in the
352 		 * initrd to become inaccessible via the linear mapping.
353 		 * Otherwise, this is a no-op
354 		 */
355 		u64 base = phys_initrd_start & PAGE_MASK;
356 		u64 size = PAGE_ALIGN(phys_initrd_start + phys_initrd_size) - base;
357 
358 		/*
359 		 * We can only add back the initrd memory if we don't end up
360 		 * with more memory than we can address via the linear mapping.
361 		 * It is up to the bootloader to position the kernel and the
362 		 * initrd reasonably close to each other (i.e., within 32 GB of
363 		 * each other) so that all granule/#levels combinations can
364 		 * always access both.
365 		 */
366 		if (WARN(base < memblock_start_of_DRAM() ||
367 			 base + size > memblock_start_of_DRAM() +
368 				       linear_region_size,
369 			"initrd not fully accessible via the linear mapping -- please check your bootloader ...\n")) {
370 			phys_initrd_size = 0;
371 		} else {
372 			memblock_add(base, size);
373 			memblock_clear_nomap(base, size);
374 			memblock_reserve(base, size);
375 		}
376 	}
377 
378 	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
379 		extern u16 memstart_offset_seed;
380 		u64 mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
381 		int parange = cpuid_feature_extract_unsigned_field(
382 					mmfr0, ID_AA64MMFR0_EL1_PARANGE_SHIFT);
383 		s64 range = linear_region_size -
384 			    BIT(id_aa64mmfr0_parange_to_phys_shift(parange));
385 
386 		/*
387 		 * If the size of the linear region exceeds, by a sufficient
388 		 * margin, the size of the region that the physical memory can
389 		 * span, randomize the linear region as well.
390 		 */
391 		if (memstart_offset_seed > 0 && range >= (s64)ARM64_MEMSTART_ALIGN) {
392 			range /= ARM64_MEMSTART_ALIGN;
393 			memstart_addr -= ARM64_MEMSTART_ALIGN *
394 					 ((range * memstart_offset_seed) >> 16);
395 		}
396 	}
397 
398 	/*
399 	 * Register the kernel text, kernel data, initrd, and initial
400 	 * pagetables with memblock.
401 	 */
402 	memblock_reserve(__pa_symbol(_stext), _end - _stext);
403 	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && phys_initrd_size) {
404 		/* the generic initrd code expects virtual addresses */
405 		initrd_start = __phys_to_virt(phys_initrd_start);
406 		initrd_end = initrd_start + phys_initrd_size;
407 	}
408 
409 	early_init_fdt_scan_reserved_mem();
410 
411 	if (!defer_reserve_crashkernel())
412 		reserve_crashkernel();
413 
414 	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
415 }
416 
417 void __init bootmem_init(void)
418 {
419 	unsigned long min, max;
420 
421 	min = PFN_UP(memblock_start_of_DRAM());
422 	max = PFN_DOWN(memblock_end_of_DRAM());
423 
424 	early_memtest(min << PAGE_SHIFT, max << PAGE_SHIFT);
425 
426 	max_pfn = max_low_pfn = max;
427 	min_low_pfn = min;
428 
429 	arch_numa_init();
430 
431 	/*
432 	 * must be done after arch_numa_init() which calls numa_init() to
433 	 * initialize node_online_map that gets used in hugetlb_cma_reserve()
434 	 * while allocating required CMA size across online nodes.
435 	 */
436 #if defined(CONFIG_HUGETLB_PAGE) && defined(CONFIG_CMA)
437 	arm64_hugetlb_cma_reserve();
438 #endif
439 
440 	dma_pernuma_cma_reserve();
441 
442 	kvm_hyp_reserve();
443 
444 	/*
445 	 * sparse_init() tries to allocate memory from memblock, so must be
446 	 * done after the fixed reservations
447 	 */
448 	sparse_init();
449 	zone_sizes_init();
450 
451 	/*
452 	 * Reserve the CMA area after arm64_dma_phys_limit was initialised.
453 	 */
454 	dma_contiguous_reserve(arm64_dma_phys_limit);
455 
456 	/*
457 	 * request_standard_resources() depends on crashkernel's memory being
458 	 * reserved, so do it here.
459 	 */
460 	if (defer_reserve_crashkernel())
461 		reserve_crashkernel();
462 
463 	memblock_dump_all();
464 }
465 
466 /*
467  * mem_init() marks the free areas in the mem_map and tells us how much memory
468  * is free.  This is done after various parts of the system have claimed their
469  * memory after the kernel image.
470  */
471 void __init mem_init(void)
472 {
473 	swiotlb_init(max_pfn > PFN_DOWN(arm64_dma_phys_limit), SWIOTLB_VERBOSE);
474 
475 	/* this will put all unused low memory onto the freelists */
476 	memblock_free_all();
477 
478 	/*
479 	 * Check boundaries twice: Some fundamental inconsistencies can be
480 	 * detected at build time already.
481 	 */
482 #ifdef CONFIG_COMPAT
483 	BUILD_BUG_ON(TASK_SIZE_32 > DEFAULT_MAP_WINDOW_64);
484 #endif
485 
486 	/*
487 	 * Selected page table levels should match when derived from
488 	 * scratch using the virtual address range and page size.
489 	 */
490 	BUILD_BUG_ON(ARM64_HW_PGTABLE_LEVELS(CONFIG_ARM64_VA_BITS) !=
491 		     CONFIG_PGTABLE_LEVELS);
492 
493 	if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) {
494 		extern int sysctl_overcommit_memory;
495 		/*
496 		 * On a machine this small we won't get anywhere without
497 		 * overcommit, so turn it on by default.
498 		 */
499 		sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
500 	}
501 }
502 
503 void free_initmem(void)
504 {
505 	free_reserved_area(lm_alias(__init_begin),
506 			   lm_alias(__init_end),
507 			   POISON_FREE_INITMEM, "unused kernel");
508 	/*
509 	 * Unmap the __init region but leave the VM area in place. This
510 	 * prevents the region from being reused for kernel modules, which
511 	 * is not supported by kallsyms.
512 	 */
513 	vunmap_range((u64)__init_begin, (u64)__init_end);
514 }
515 
516 void dump_mem_limit(void)
517 {
518 	if (memory_limit != PHYS_ADDR_MAX) {
519 		pr_emerg("Memory Limit: %llu MB\n", memory_limit >> 20);
520 	} else {
521 		pr_emerg("Memory Limit: none\n");
522 	}
523 }
524