1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Based on arch/arm/include/asm/memory.h 4 * 5 * Copyright (C) 2000-2002 Russell King 6 * Copyright (C) 2012 ARM Ltd. 7 * 8 * Note: this file should not be included by non-asm/.h files 9 */ 10 #ifndef __ASM_MEMORY_H 11 #define __ASM_MEMORY_H 12 13 #include <linux/const.h> 14 #include <linux/sizes.h> 15 #include <asm/page-def.h> 16 17 /* 18 * Size of the PCI I/O space. This must remain a power of two so that 19 * IO_SPACE_LIMIT acts as a mask for the low bits of I/O addresses. 20 */ 21 #define PCI_IO_SIZE SZ_16M 22 23 /* 24 * VMEMMAP_SIZE - allows the whole linear region to be covered by 25 * a struct page array 26 * 27 * If we are configured with a 52-bit kernel VA then our VMEMMAP_SIZE 28 * needs to cover the memory region from the beginning of the 52-bit 29 * PAGE_OFFSET all the way to PAGE_END for 48-bit. This allows us to 30 * keep a constant PAGE_OFFSET and "fallback" to using the higher end 31 * of the VMEMMAP where 52-bit support is not available in hardware. 32 */ 33 #define VMEMMAP_SHIFT (PAGE_SHIFT - STRUCT_PAGE_MAX_SHIFT) 34 #define VMEMMAP_SIZE ((_PAGE_END(VA_BITS_MIN) - PAGE_OFFSET) >> VMEMMAP_SHIFT) 35 36 /* 37 * PAGE_OFFSET - the virtual address of the start of the linear map, at the 38 * start of the TTBR1 address space. 39 * PAGE_END - the end of the linear map, where all other kernel mappings begin. 40 * KIMAGE_VADDR - the virtual address of the start of the kernel image. 41 * VA_BITS - the maximum number of bits for virtual addresses. 42 */ 43 #define VA_BITS (CONFIG_ARM64_VA_BITS) 44 #define _PAGE_OFFSET(va) (-(UL(1) << (va))) 45 #define PAGE_OFFSET (_PAGE_OFFSET(VA_BITS)) 46 #define KIMAGE_VADDR (MODULES_END) 47 #define BPF_JIT_REGION_START (_PAGE_END(VA_BITS_MIN)) 48 #define BPF_JIT_REGION_SIZE (SZ_128M) 49 #define BPF_JIT_REGION_END (BPF_JIT_REGION_START + BPF_JIT_REGION_SIZE) 50 #define MODULES_END (MODULES_VADDR + MODULES_VSIZE) 51 #define MODULES_VADDR (BPF_JIT_REGION_END) 52 #define MODULES_VSIZE (SZ_128M) 53 #define VMEMMAP_START (-(UL(1) << (VA_BITS - VMEMMAP_SHIFT))) 54 #define VMEMMAP_END (VMEMMAP_START + VMEMMAP_SIZE) 55 #define PCI_IO_END (VMEMMAP_START - SZ_8M) 56 #define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE) 57 #define FIXADDR_TOP (VMEMMAP_START - SZ_32M) 58 59 #if VA_BITS > 48 60 #define VA_BITS_MIN (48) 61 #else 62 #define VA_BITS_MIN (VA_BITS) 63 #endif 64 65 #define _PAGE_END(va) (-(UL(1) << ((va) - 1))) 66 67 #define KERNEL_START _text 68 #define KERNEL_END _end 69 70 /* 71 * Generic and tag-based KASAN require 1/8th and 1/16th of the kernel virtual 72 * address space for the shadow region respectively. They can bloat the stack 73 * significantly, so double the (minimum) stack size when they are in use. 74 */ 75 #if defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KASAN_SW_TAGS) 76 #define KASAN_SHADOW_OFFSET _AC(CONFIG_KASAN_SHADOW_OFFSET, UL) 77 #define KASAN_SHADOW_END ((UL(1) << (64 - KASAN_SHADOW_SCALE_SHIFT)) \ 78 + KASAN_SHADOW_OFFSET) 79 #define PAGE_END (KASAN_SHADOW_END - (1UL << (vabits_actual - KASAN_SHADOW_SCALE_SHIFT))) 80 #define KASAN_THREAD_SHIFT 1 81 #else 82 #define KASAN_THREAD_SHIFT 0 83 #define PAGE_END (_PAGE_END(VA_BITS_MIN)) 84 #endif /* CONFIG_KASAN */ 85 86 #define MIN_THREAD_SHIFT (14 + KASAN_THREAD_SHIFT) 87 88 /* 89 * VMAP'd stacks are allocated at page granularity, so we must ensure that such 90 * stacks are a multiple of page size. 91 */ 92 #if defined(CONFIG_VMAP_STACK) && (MIN_THREAD_SHIFT < PAGE_SHIFT) 93 #define THREAD_SHIFT PAGE_SHIFT 94 #else 95 #define THREAD_SHIFT MIN_THREAD_SHIFT 96 #endif 97 98 #if THREAD_SHIFT >= PAGE_SHIFT 99 #define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT) 100 #endif 101 102 #define THREAD_SIZE (UL(1) << THREAD_SHIFT) 103 104 /* 105 * By aligning VMAP'd stacks to 2 * THREAD_SIZE, we can detect overflow by 106 * checking sp & (1 << THREAD_SHIFT), which we can do cheaply in the entry 107 * assembly. 108 */ 109 #ifdef CONFIG_VMAP_STACK 110 #define THREAD_ALIGN (2 * THREAD_SIZE) 111 #else 112 #define THREAD_ALIGN THREAD_SIZE 113 #endif 114 115 #define IRQ_STACK_SIZE THREAD_SIZE 116 117 #define OVERFLOW_STACK_SIZE SZ_4K 118 119 /* 120 * Alignment of kernel segments (e.g. .text, .data). 121 * 122 * 4 KB granule: 16 level 3 entries, with contiguous bit 123 * 16 KB granule: 4 level 3 entries, without contiguous bit 124 * 64 KB granule: 1 level 3 entry 125 */ 126 #define SEGMENT_ALIGN SZ_64K 127 128 /* 129 * Memory types available. 130 * 131 * IMPORTANT: MT_NORMAL must be index 0 since vm_get_page_prot() may 'or' in 132 * the MT_NORMAL_TAGGED memory type for PROT_MTE mappings. Note 133 * that protection_map[] only contains MT_NORMAL attributes. 134 */ 135 #define MT_NORMAL 0 136 #define MT_NORMAL_TAGGED 1 137 #define MT_NORMAL_NC 2 138 #define MT_NORMAL_WT 3 139 #define MT_DEVICE_nGnRnE 4 140 #define MT_DEVICE_nGnRE 5 141 #define MT_DEVICE_GRE 6 142 143 /* 144 * Memory types for Stage-2 translation 145 */ 146 #define MT_S2_NORMAL 0xf 147 #define MT_S2_DEVICE_nGnRE 0x1 148 149 /* 150 * Memory types for Stage-2 translation when ID_AA64MMFR2_EL1.FWB is 0001 151 * Stage-2 enforces Normal-WB and Device-nGnRE 152 */ 153 #define MT_S2_FWB_NORMAL 6 154 #define MT_S2_FWB_DEVICE_nGnRE 1 155 156 #ifdef CONFIG_ARM64_4K_PAGES 157 #define IOREMAP_MAX_ORDER (PUD_SHIFT) 158 #else 159 #define IOREMAP_MAX_ORDER (PMD_SHIFT) 160 #endif 161 162 #ifndef __ASSEMBLY__ 163 164 #include <linux/bitops.h> 165 #include <linux/compiler.h> 166 #include <linux/mmdebug.h> 167 #include <linux/types.h> 168 #include <asm/bug.h> 169 170 extern u64 vabits_actual; 171 172 extern s64 memstart_addr; 173 /* PHYS_OFFSET - the physical address of the start of memory. */ 174 #define PHYS_OFFSET ({ VM_BUG_ON(memstart_addr & 1); memstart_addr; }) 175 176 /* the virtual base of the kernel image */ 177 extern u64 kimage_vaddr; 178 179 /* the offset between the kernel virtual and physical mappings */ 180 extern u64 kimage_voffset; 181 182 static inline unsigned long kaslr_offset(void) 183 { 184 return kimage_vaddr - KIMAGE_VADDR; 185 } 186 187 /* 188 * Allow all memory at the discovery stage. We will clip it later. 189 */ 190 #define MIN_MEMBLOCK_ADDR 0 191 #define MAX_MEMBLOCK_ADDR U64_MAX 192 193 /* 194 * PFNs are used to describe any physical page; this means 195 * PFN 0 == physical address 0. 196 * 197 * This is the PFN of the first RAM page in the kernel 198 * direct-mapped view. We assume this is the first page 199 * of RAM in the mem_map as well. 200 */ 201 #define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT) 202 203 /* 204 * When dealing with data aborts, watchpoints, or instruction traps we may end 205 * up with a tagged userland pointer. Clear the tag to get a sane pointer to 206 * pass on to access_ok(), for instance. 207 */ 208 #define __untagged_addr(addr) \ 209 ((__force __typeof__(addr))sign_extend64((__force u64)(addr), 55)) 210 211 #define untagged_addr(addr) ({ \ 212 u64 __addr = (__force u64)(addr); \ 213 __addr &= __untagged_addr(__addr); \ 214 (__force __typeof__(addr))__addr; \ 215 }) 216 217 #if defined(CONFIG_KASAN_SW_TAGS) || defined(CONFIG_KASAN_HW_TAGS) 218 #define __tag_shifted(tag) ((u64)(tag) << 56) 219 #define __tag_reset(addr) __untagged_addr(addr) 220 #define __tag_get(addr) (__u8)((u64)(addr) >> 56) 221 #else 222 #define __tag_shifted(tag) 0UL 223 #define __tag_reset(addr) (addr) 224 #define __tag_get(addr) 0 225 #endif /* CONFIG_KASAN_SW_TAGS || CONFIG_KASAN_HW_TAGS */ 226 227 static inline const void *__tag_set(const void *addr, u8 tag) 228 { 229 u64 __addr = (u64)addr & ~__tag_shifted(0xff); 230 return (const void *)(__addr | __tag_shifted(tag)); 231 } 232 233 #ifdef CONFIG_KASAN_HW_TAGS 234 #define arch_enable_tagging() mte_enable_kernel() 235 #define arch_init_tags(max_tag) mte_init_tags(max_tag) 236 #define arch_get_random_tag() mte_get_random_tag() 237 #define arch_get_mem_tag(addr) mte_get_mem_tag(addr) 238 #define arch_set_mem_tag_range(addr, size, tag) \ 239 mte_set_mem_tag_range((addr), (size), (tag)) 240 #endif /* CONFIG_KASAN_HW_TAGS */ 241 242 /* 243 * Physical vs virtual RAM address space conversion. These are 244 * private definitions which should NOT be used outside memory.h 245 * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. 246 */ 247 248 249 /* 250 * The linear kernel range starts at the bottom of the virtual address space. 251 */ 252 #define __is_lm_address(addr) (((u64)(addr) & ~PAGE_OFFSET) < (PAGE_END - PAGE_OFFSET)) 253 254 #define __lm_to_phys(addr) (((addr) & ~PAGE_OFFSET) + PHYS_OFFSET) 255 #define __kimg_to_phys(addr) ((addr) - kimage_voffset) 256 257 #define __virt_to_phys_nodebug(x) ({ \ 258 phys_addr_t __x = (phys_addr_t)(__tag_reset(x)); \ 259 __is_lm_address(__x) ? __lm_to_phys(__x) : __kimg_to_phys(__x); \ 260 }) 261 262 #define __pa_symbol_nodebug(x) __kimg_to_phys((phys_addr_t)(x)) 263 264 #ifdef CONFIG_DEBUG_VIRTUAL 265 extern phys_addr_t __virt_to_phys(unsigned long x); 266 extern phys_addr_t __phys_addr_symbol(unsigned long x); 267 #else 268 #define __virt_to_phys(x) __virt_to_phys_nodebug(x) 269 #define __phys_addr_symbol(x) __pa_symbol_nodebug(x) 270 #endif /* CONFIG_DEBUG_VIRTUAL */ 271 272 #define __phys_to_virt(x) ((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET) 273 #define __phys_to_kimg(x) ((unsigned long)((x) + kimage_voffset)) 274 275 /* 276 * Convert a page to/from a physical address 277 */ 278 #define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page))) 279 #define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys))) 280 281 /* 282 * Note: Drivers should NOT use these. They are the wrong 283 * translation for translating DMA addresses. Use the driver 284 * DMA support - see dma-mapping.h. 285 */ 286 #define virt_to_phys virt_to_phys 287 static inline phys_addr_t virt_to_phys(const volatile void *x) 288 { 289 return __virt_to_phys((unsigned long)(x)); 290 } 291 292 #define phys_to_virt phys_to_virt 293 static inline void *phys_to_virt(phys_addr_t x) 294 { 295 return (void *)(__phys_to_virt(x)); 296 } 297 298 /* 299 * Drivers should NOT use these either. 300 */ 301 #define __pa(x) __virt_to_phys((unsigned long)(x)) 302 #define __pa_symbol(x) __phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0)) 303 #define __pa_nodebug(x) __virt_to_phys_nodebug((unsigned long)(x)) 304 #define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x))) 305 #define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) 306 #define virt_to_pfn(x) __phys_to_pfn(__virt_to_phys((unsigned long)(x))) 307 #define sym_to_pfn(x) __phys_to_pfn(__pa_symbol(x)) 308 309 /* 310 * virt_to_page(x) convert a _valid_ virtual address to struct page * 311 * virt_addr_valid(x) indicates whether a virtual address is valid 312 */ 313 #define ARCH_PFN_OFFSET ((unsigned long)PHYS_PFN_OFFSET) 314 315 #if !defined(CONFIG_SPARSEMEM_VMEMMAP) || defined(CONFIG_DEBUG_VIRTUAL) 316 #define virt_to_page(x) pfn_to_page(virt_to_pfn(x)) 317 #else 318 #define page_to_virt(x) ({ \ 319 __typeof__(x) __page = x; \ 320 u64 __idx = ((u64)__page - VMEMMAP_START) / sizeof(struct page);\ 321 u64 __addr = PAGE_OFFSET + (__idx * PAGE_SIZE); \ 322 (void *)__tag_set((const void *)__addr, page_kasan_tag(__page));\ 323 }) 324 325 #define virt_to_page(x) ({ \ 326 u64 __idx = (__tag_reset((u64)x) - PAGE_OFFSET) / PAGE_SIZE; \ 327 u64 __addr = VMEMMAP_START + (__idx * sizeof(struct page)); \ 328 (struct page *)__addr; \ 329 }) 330 #endif /* !CONFIG_SPARSEMEM_VMEMMAP || CONFIG_DEBUG_VIRTUAL */ 331 332 #define virt_addr_valid(addr) ({ \ 333 __typeof__(addr) __addr = addr; \ 334 __is_lm_address(__addr) && pfn_valid(virt_to_pfn(__addr)); \ 335 }) 336 337 void dump_mem_limit(void); 338 #endif /* !ASSEMBLY */ 339 340 /* 341 * Given that the GIC architecture permits ITS implementations that can only be 342 * configured with a LPI table address once, GICv3 systems with many CPUs may 343 * end up reserving a lot of different regions after a kexec for their LPI 344 * tables (one per CPU), as we are forced to reuse the same memory after kexec 345 * (and thus reserve it persistently with EFI beforehand) 346 */ 347 #if defined(CONFIG_EFI) && defined(CONFIG_ARM_GIC_V3_ITS) 348 # define INIT_MEMBLOCK_RESERVED_REGIONS (INIT_MEMBLOCK_REGIONS + NR_CPUS + 1) 349 #endif 350 351 #include <asm-generic/memory_model.h> 352 353 #endif /* __ASM_MEMORY_H */ 354