1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * Copyright (C) 2012 ARM Ltd. 4 */ 5 #ifndef __ASM_CACHE_H 6 #define __ASM_CACHE_H 7 8 #define L1_CACHE_SHIFT (6) 9 #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) 10 11 #define CLIDR_LOUU_SHIFT 27 12 #define CLIDR_LOC_SHIFT 24 13 #define CLIDR_LOUIS_SHIFT 21 14 15 #define CLIDR_LOUU(clidr) (((clidr) >> CLIDR_LOUU_SHIFT) & 0x7) 16 #define CLIDR_LOC(clidr) (((clidr) >> CLIDR_LOC_SHIFT) & 0x7) 17 #define CLIDR_LOUIS(clidr) (((clidr) >> CLIDR_LOUIS_SHIFT) & 0x7) 18 19 /* Ctypen, bits[3(n - 1) + 2 : 3(n - 1)], for n = 1 to 7 */ 20 #define CLIDR_CTYPE_SHIFT(level) (3 * (level - 1)) 21 #define CLIDR_CTYPE_MASK(level) (7 << CLIDR_CTYPE_SHIFT(level)) 22 #define CLIDR_CTYPE(clidr, level) \ 23 (((clidr) & CLIDR_CTYPE_MASK(level)) >> CLIDR_CTYPE_SHIFT(level)) 24 25 /* Ttypen, bits [2(n - 1) + 34 : 2(n - 1) + 33], for n = 1 to 7 */ 26 #define CLIDR_TTYPE_SHIFT(level) (2 * ((level) - 1) + CLIDR_EL1_Ttypen_SHIFT) 27 28 /* 29 * Memory returned by kmalloc() may be used for DMA, so we must make 30 * sure that all such allocations are cache aligned. Otherwise, 31 * unrelated code may cause parts of the buffer to be read into the 32 * cache before the transfer is done, causing old data to be seen by 33 * the CPU. 34 */ 35 #define ARCH_DMA_MINALIGN (128) 36 #define ARCH_KMALLOC_MINALIGN (8) 37 38 #ifndef __ASSEMBLY__ 39 40 #include <linux/bitops.h> 41 #include <linux/kasan-enabled.h> 42 43 #include <asm/cputype.h> 44 #include <asm/mte-def.h> 45 #include <asm/sysreg.h> 46 47 #ifdef CONFIG_KASAN_SW_TAGS 48 #define ARCH_SLAB_MINALIGN (1ULL << KASAN_SHADOW_SCALE_SHIFT) 49 #elif defined(CONFIG_KASAN_HW_TAGS) 50 static inline unsigned int arch_slab_minalign(void) 51 { 52 return kasan_hw_tags_enabled() ? MTE_GRANULE_SIZE : 53 __alignof__(unsigned long long); 54 } 55 #define arch_slab_minalign() arch_slab_minalign() 56 #endif 57 58 #define CTR_L1IP(ctr) SYS_FIELD_GET(CTR_EL0, L1Ip, ctr) 59 60 #define ICACHEF_ALIASING 0 61 extern unsigned long __icache_flags; 62 63 /* 64 * Whilst the D-side always behaves as PIPT on AArch64, aliasing is 65 * permitted in the I-cache. 66 */ 67 static inline int icache_is_aliasing(void) 68 { 69 return test_bit(ICACHEF_ALIASING, &__icache_flags); 70 } 71 72 static inline u32 cache_type_cwg(void) 73 { 74 return SYS_FIELD_GET(CTR_EL0, CWG, read_cpuid_cachetype()); 75 } 76 77 #define __read_mostly __section(".data..read_mostly") 78 79 static inline int cache_line_size_of_cpu(void) 80 { 81 u32 cwg = cache_type_cwg(); 82 83 return cwg ? 4 << cwg : ARCH_DMA_MINALIGN; 84 } 85 86 int cache_line_size(void); 87 88 #define dma_get_cache_alignment cache_line_size 89 90 /* 91 * Read the effective value of CTR_EL0. 92 * 93 * According to ARM ARM for ARMv8-A (ARM DDI 0487C.a), 94 * section D10.2.33 "CTR_EL0, Cache Type Register" : 95 * 96 * CTR_EL0.IDC reports the data cache clean requirements for 97 * instruction to data coherence. 98 * 99 * 0 - dcache clean to PoU is required unless : 100 * (CLIDR_EL1.LoC == 0) || (CLIDR_EL1.LoUIS == 0 && CLIDR_EL1.LoUU == 0) 101 * 1 - dcache clean to PoU is not required for i-to-d coherence. 102 * 103 * This routine provides the CTR_EL0 with the IDC field updated to the 104 * effective state. 105 */ 106 static inline u32 __attribute_const__ read_cpuid_effective_cachetype(void) 107 { 108 u32 ctr = read_cpuid_cachetype(); 109 110 if (!(ctr & BIT(CTR_EL0_IDC_SHIFT))) { 111 u64 clidr = read_sysreg(clidr_el1); 112 113 if (CLIDR_LOC(clidr) == 0 || 114 (CLIDR_LOUIS(clidr) == 0 && CLIDR_LOUU(clidr) == 0)) 115 ctr |= BIT(CTR_EL0_IDC_SHIFT); 116 } 117 118 return ctr; 119 } 120 121 #endif /* __ASSEMBLY__ */ 122 123 #endif 124