xref: /linux/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts (revision e7d759f31ca295d589f7420719c311870bb3166f) 
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * dts file for Xilinx ZynqMP zc1751-xm018-dc4
4 *
5 * (C) Copyright 2015 - 2021, Xilinx, Inc.
6 *
7 * Michal Simek <michal.simek@amd.com>
8 */
9
10/dts-v1/;
11
12#include "zynqmp.dtsi"
13#include "zynqmp-clk-ccf.dtsi"
14
15/ {
16	model = "ZynqMP zc1751-xm018-dc4";
17	compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
18
19	aliases {
20		ethernet0 = &gem0;
21		ethernet1 = &gem1;
22		ethernet2 = &gem2;
23		ethernet3 = &gem3;
24		i2c0 = &i2c0;
25		i2c1 = &i2c1;
26		rtc0 = &rtc;
27		serial0 = &uart0;
28		serial1 = &uart1;
29		spi0 = &qspi;
30	};
31
32	chosen {
33		bootargs = "earlycon";
34		stdout-path = "serial0:115200n8";
35	};
36
37	memory@0 {
38		device_type = "memory";
39		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
40	};
41};
42
43&can0 {
44	status = "okay";
45};
46
47&can1 {
48	status = "okay";
49};
50
51&fpd_dma_chan1 {
52	status = "okay";
53};
54
55&fpd_dma_chan2 {
56	status = "okay";
57};
58
59&fpd_dma_chan3 {
60	status = "okay";
61};
62
63&fpd_dma_chan4 {
64	status = "okay";
65};
66
67&fpd_dma_chan5 {
68	status = "okay";
69};
70
71&fpd_dma_chan6 {
72	status = "okay";
73};
74
75&fpd_dma_chan7 {
76	status = "okay";
77};
78
79&fpd_dma_chan8 {
80	status = "okay";
81};
82
83&lpd_dma_chan1 {
84	status = "okay";
85};
86
87&lpd_dma_chan2 {
88	status = "okay";
89};
90
91&lpd_dma_chan3 {
92	status = "okay";
93};
94
95&lpd_dma_chan4 {
96	status = "okay";
97};
98
99&lpd_dma_chan5 {
100	status = "okay";
101};
102
103&lpd_dma_chan6 {
104	status = "okay";
105};
106
107&lpd_dma_chan7 {
108	status = "okay";
109};
110
111&lpd_dma_chan8 {
112	status = "okay";
113};
114
115&gem0 {
116	status = "okay";
117	phy-mode = "rgmii-id";
118	phy-handle = <&ethernet_phy0>;
119	mdio: mdio {
120		#address-cells = <1>;
121		#size-cells = <0>;
122		ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */
123			reg = <0>;
124		};
125		ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */
126			reg = <7>;
127		};
128		ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */
129			reg = <3>;
130		};
131		ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */
132			reg = <8>;
133		};
134	};
135};
136
137&gem1 {
138	status = "okay";
139	phy-mode = "rgmii-id";
140	phy-handle = <&ethernet_phy7>;
141};
142
143&gem2 {
144	status = "okay";
145	phy-mode = "rgmii-id";
146	phy-handle = <&ethernet_phy3>;
147};
148
149&gem3 {
150	status = "okay";
151	phy-mode = "rgmii-id";
152	phy-handle = <&ethernet_phy8>;
153};
154
155&gpio {
156	status = "okay";
157};
158
159&gpu {
160	status = "okay";
161};
162
163&i2c0 {
164	clock-frequency = <400000>;
165	status = "okay";
166};
167
168&i2c1 {
169	clock-frequency = <400000>;
170	status = "okay";
171};
172
173&qspi {
174	status = "okay";
175	flash@0 {
176		compatible = "m25p80", "jedec,spi-nor"; /* 32MB */
177		#address-cells = <1>;
178		#size-cells = <1>;
179		reg = <0x0>;
180		spi-tx-bus-width = <4>;
181		spi-rx-bus-width = <4>; /* also DUAL configuration possible */
182		spi-max-frequency = <108000000>; /* Based on DC1 spec */
183	};
184};
185
186&rtc {
187	status = "okay";
188};
189
190&uart0 {
191	status = "okay";
192};
193
194&uart1 {
195	status = "okay";
196};
197
198&watchdog0 {
199	status = "okay";
200};
201
202&zynqmp_dpdma {
203	status = "okay";
204};
205
206&zynqmp_dpsub {
207	status = "okay";
208};
209