1// SPDX-License-Identifier: GPL-2.0+ 2/* 3 * dts file for Xilinx ZynqMP zc1751-xm015-dc1 4 * 5 * (C) Copyright 2015 - 2022, Xilinx, Inc. 6 * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. 7 * 8 * Michal Simek <michal.simek@amd.com> 9 */ 10 11/dts-v1/; 12 13#include "zynqmp.dtsi" 14#include "zynqmp-clk-ccf.dtsi" 15#include <dt-bindings/phy/phy.h> 16#include <dt-bindings/gpio/gpio.h> 17#include <dt-bindings/pinctrl/pinctrl-zynqmp.h> 18 19/ { 20 model = "ZynqMP zc1751-xm015-dc1 RevA"; 21 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; 22 23 aliases { 24 ethernet0 = &gem3; 25 i2c0 = &i2c1; 26 mmc0 = &sdhci0; 27 mmc1 = &sdhci1; 28 rtc0 = &rtc; 29 serial0 = &uart0; 30 spi0 = &qspi; 31 usb0 = &usb0; 32 }; 33 34 chosen { 35 bootargs = "earlycon"; 36 stdout-path = "serial0:115200n8"; 37 }; 38 39 memory@0 { 40 device_type = "memory"; 41 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; 42 }; 43 44 clock_si5338_0: clk27 { /* u55 SI5338-GM */ 45 compatible = "fixed-clock"; 46 #clock-cells = <0>; 47 clock-frequency = <27000000>; 48 }; 49 50 clock_si5338_2: clk26 { 51 compatible = "fixed-clock"; 52 #clock-cells = <0>; 53 clock-frequency = <26000000>; 54 }; 55 56 clock_si5338_3: clk150 { 57 compatible = "fixed-clock"; 58 #clock-cells = <0>; 59 clock-frequency = <150000000>; 60 }; 61}; 62 63&fpd_dma_chan1 { 64 status = "okay"; 65}; 66 67&fpd_dma_chan2 { 68 status = "okay"; 69}; 70 71&fpd_dma_chan3 { 72 status = "okay"; 73}; 74 75&fpd_dma_chan4 { 76 status = "okay"; 77}; 78 79&fpd_dma_chan5 { 80 status = "okay"; 81}; 82 83&fpd_dma_chan6 { 84 status = "okay"; 85}; 86 87&fpd_dma_chan7 { 88 status = "okay"; 89}; 90 91&fpd_dma_chan8 { 92 status = "okay"; 93}; 94 95&gem3 { 96 status = "okay"; 97 phy-handle = <&phy0>; 98 phy-mode = "rgmii-id"; 99 pinctrl-names = "default"; 100 pinctrl-0 = <&pinctrl_gem3_default>; 101 phy0: ethernet-phy@0 { 102 reg = <0>; 103 }; 104}; 105 106&gpio { 107 status = "okay"; 108 pinctrl-names = "default"; 109 pinctrl-0 = <&pinctrl_gpio_default>; 110}; 111 112&gpu { 113 status = "okay"; 114}; 115 116&i2c1 { 117 status = "okay"; 118 clock-frequency = <400000>; 119 pinctrl-names = "default", "gpio"; 120 pinctrl-0 = <&pinctrl_i2c1_default>; 121 pinctrl-1 = <&pinctrl_i2c1_gpio>; 122 scl-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; 123 sda-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; 124 125 eeprom: eeprom@55 { 126 compatible = "atmel,24c64"; /* 24AA64 */ 127 reg = <0x55>; 128 }; 129}; 130 131&pinctrl0 { 132 status = "okay"; 133 pinctrl_i2c1_default: i2c1-default { 134 mux { 135 groups = "i2c1_9_grp"; 136 function = "i2c1"; 137 }; 138 139 conf { 140 groups = "i2c1_9_grp"; 141 bias-pull-up; 142 slew-rate = <SLEW_RATE_SLOW>; 143 power-source = <IO_STANDARD_LVCMOS18>; 144 }; 145 }; 146 147 pinctrl_i2c1_gpio: i2c1-gpio { 148 mux { 149 groups = "gpio0_36_grp", "gpio0_37_grp"; 150 function = "gpio0"; 151 }; 152 153 conf { 154 groups = "gpio0_36_grp", "gpio0_37_grp"; 155 slew-rate = <SLEW_RATE_SLOW>; 156 power-source = <IO_STANDARD_LVCMOS18>; 157 }; 158 }; 159 160 pinctrl_uart0_default: uart0-default { 161 mux { 162 groups = "uart0_8_grp"; 163 function = "uart0"; 164 }; 165 166 conf { 167 groups = "uart0_8_grp"; 168 slew-rate = <SLEW_RATE_SLOW>; 169 power-source = <IO_STANDARD_LVCMOS18>; 170 }; 171 172 conf-rx { 173 pins = "MIO34"; 174 bias-high-impedance; 175 }; 176 177 conf-tx { 178 pins = "MIO35"; 179 bias-disable; 180 }; 181 }; 182 183 pinctrl_usb0_default: usb0-default { 184 mux { 185 groups = "usb0_0_grp"; 186 function = "usb0"; 187 }; 188 189 conf { 190 groups = "usb0_0_grp"; 191 power-source = <IO_STANDARD_LVCMOS18>; 192 }; 193 194 conf-rx { 195 pins = "MIO52", "MIO53", "MIO55"; 196 bias-high-impedance; 197 drive-strength = <12>; 198 slew-rate = <SLEW_RATE_FAST>; 199 }; 200 201 conf-tx { 202 pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59", 203 "MIO60", "MIO61", "MIO62", "MIO63"; 204 bias-disable; 205 drive-strength = <4>; 206 slew-rate = <SLEW_RATE_SLOW>; 207 }; 208 }; 209 210 pinctrl_gem3_default: gem3-default { 211 mux { 212 function = "ethernet3"; 213 groups = "ethernet3_0_grp"; 214 }; 215 216 conf { 217 groups = "ethernet3_0_grp"; 218 slew-rate = <SLEW_RATE_SLOW>; 219 power-source = <IO_STANDARD_LVCMOS18>; 220 }; 221 222 conf-rx { 223 pins = "MIO70", "MIO71", "MIO72", "MIO73", "MIO74", 224 "MIO75"; 225 bias-high-impedance; 226 low-power-disable; 227 }; 228 229 conf-tx { 230 pins = "MIO64", "MIO65", "MIO66", "MIO67", "MIO68", 231 "MIO69"; 232 bias-disable; 233 low-power-enable; 234 }; 235 236 mux-mdio { 237 function = "mdio3"; 238 groups = "mdio3_0_grp"; 239 }; 240 241 conf-mdio { 242 groups = "mdio3_0_grp"; 243 slew-rate = <SLEW_RATE_SLOW>; 244 power-source = <IO_STANDARD_LVCMOS18>; 245 bias-disable; 246 }; 247 }; 248 249 pinctrl_sdhci0_default: sdhci0-default { 250 mux { 251 groups = "sdio0_0_grp"; 252 function = "sdio0"; 253 }; 254 255 conf { 256 groups = "sdio0_0_grp"; 257 slew-rate = <SLEW_RATE_SLOW>; 258 power-source = <IO_STANDARD_LVCMOS18>; 259 bias-disable; 260 }; 261 262 mux-cd { 263 groups = "sdio0_cd_0_grp"; 264 function = "sdio0_cd"; 265 }; 266 267 conf-cd { 268 groups = "sdio0_cd_0_grp"; 269 bias-high-impedance; 270 bias-pull-up; 271 slew-rate = <SLEW_RATE_SLOW>; 272 power-source = <IO_STANDARD_LVCMOS18>; 273 }; 274 275 mux-wp { 276 groups = "sdio0_wp_0_grp"; 277 function = "sdio0_wp"; 278 }; 279 280 conf-wp { 281 groups = "sdio0_wp_0_grp"; 282 bias-high-impedance; 283 bias-pull-up; 284 slew-rate = <SLEW_RATE_SLOW>; 285 power-source = <IO_STANDARD_LVCMOS18>; 286 }; 287 }; 288 289 pinctrl_sdhci1_default: sdhci1-default { 290 mux { 291 groups = "sdio1_0_grp"; 292 function = "sdio1"; 293 }; 294 295 conf { 296 groups = "sdio1_0_grp"; 297 slew-rate = <SLEW_RATE_SLOW>; 298 power-source = <IO_STANDARD_LVCMOS18>; 299 bias-disable; 300 }; 301 302 mux-cd { 303 groups = "sdio1_cd_0_grp"; 304 function = "sdio1_cd"; 305 }; 306 307 conf-cd { 308 groups = "sdio1_cd_0_grp"; 309 bias-high-impedance; 310 bias-pull-up; 311 slew-rate = <SLEW_RATE_SLOW>; 312 power-source = <IO_STANDARD_LVCMOS18>; 313 }; 314 315 mux-wp { 316 groups = "sdio1_wp_0_grp"; 317 function = "sdio1_wp"; 318 }; 319 320 conf-wp { 321 groups = "sdio1_wp_0_grp"; 322 bias-high-impedance; 323 bias-pull-up; 324 slew-rate = <SLEW_RATE_SLOW>; 325 power-source = <IO_STANDARD_LVCMOS18>; 326 }; 327 }; 328 329 pinctrl_gpio_default: gpio-default { 330 mux { 331 function = "gpio0"; 332 groups = "gpio0_38_grp"; 333 }; 334 335 conf { 336 groups = "gpio0_38_grp"; 337 bias-disable; 338 slew-rate = <SLEW_RATE_SLOW>; 339 power-source = <IO_STANDARD_LVCMOS18>; 340 }; 341 }; 342}; 343 344&psgtr { 345 status = "okay"; 346 /* dp, usb3, sata */ 347 clocks = <&clock_si5338_0>, <&clock_si5338_2>, <&clock_si5338_3>; 348 clock-names = "ref1", "ref2", "ref3"; 349}; 350 351&qspi { 352 status = "okay"; 353 flash@0 { 354 compatible = "m25p80", "jedec,spi-nor"; /* Micron MT25QU512ABB8ESF */ 355 #address-cells = <1>; 356 #size-cells = <1>; 357 reg = <0x0>; 358 spi-tx-bus-width = <4>; 359 spi-rx-bus-width = <4>; 360 spi-max-frequency = <108000000>; /* Based on DC1 spec */ 361 }; 362}; 363 364&rtc { 365 status = "okay"; 366}; 367 368&sata { 369 status = "okay"; 370 /* SATA phy OOB timing settings */ 371 ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; 372 ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; 373 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 374 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 375 ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; 376 ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; 377 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; 378 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; 379 phy-names = "sata-phy"; 380 phys = <&psgtr 3 PHY_TYPE_SATA 1 3>; 381}; 382 383/* eMMC */ 384&sdhci0 { 385 status = "okay"; 386 pinctrl-names = "default"; 387 pinctrl-0 = <&pinctrl_sdhci0_default>; 388 bus-width = <8>; 389 xlnx,mio-bank = <0>; 390}; 391 392/* SD1 with level shifter */ 393&sdhci1 { 394 status = "okay"; 395 /* 396 * This property should be removed for supporting UHS mode 397 */ 398 no-1-8-v; 399 pinctrl-names = "default"; 400 pinctrl-0 = <&pinctrl_sdhci1_default>; 401 xlnx,mio-bank = <1>; 402}; 403 404&uart0 { 405 status = "okay"; 406 pinctrl-names = "default"; 407 pinctrl-0 = <&pinctrl_uart0_default>; 408}; 409 410/* ULPI SMSC USB3320 */ 411&usb0 { 412 status = "okay"; 413 pinctrl-names = "default"; 414 pinctrl-0 = <&pinctrl_usb0_default>; 415 phy-names = "usb3-phy"; 416 phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; 417}; 418 419&dwc3_0 { 420 status = "okay"; 421 dr_mode = "host"; 422 snps,usb3_lpm_capable; 423 maximum-speed = "super-speed"; 424}; 425 426&zynqmp_dpdma { 427 status = "okay"; 428}; 429 430&zynqmp_dpsub { 431 status = "okay"; 432 phy-names = "dp-phy0", "dp-phy1"; 433 phys = <&psgtr 1 PHY_TYPE_DP 0 0>, 434 <&psgtr 0 PHY_TYPE_DP 1 1>; 435}; 436