xref: /linux/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi (revision 8c994eff8fcfe8ecb1f1dbebed25b4d7bb75be12)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for J721S2 SoC Family MCU/WAKEUP Domain peripherals
4 *
5 * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
6 */
7
8&cbass_mcu_wakeup {
9	sms: system-controller@44083000 {
10		compatible = "ti,k2g-sci";
11		ti,host-id = <12>;
12
13		mbox-names = "rx", "tx";
14
15		mboxes = <&secure_proxy_main 11>,
16			 <&secure_proxy_main 13>;
17
18		reg-names = "debug_messages";
19		reg = <0x00 0x44083000 0x00 0x1000>;
20
21		k3_pds: power-controller {
22			compatible = "ti,sci-pm-domain";
23			#power-domain-cells = <2>;
24		};
25
26		k3_clks: clock-controller {
27			compatible = "ti,k2g-sci-clk";
28			#clock-cells = <2>;
29		};
30
31		k3_reset: reset-controller {
32			compatible = "ti,sci-reset";
33			#reset-cells = <2>;
34		};
35	};
36
37	chipid@43000014 {
38		compatible = "ti,am654-chipid";
39		reg = <0x00 0x43000014 0x00 0x4>;
40	};
41
42	secure_proxy_sa3: mailbox@43600000 {
43		compatible = "ti,am654-secure-proxy";
44		#mbox-cells = <1>;
45		reg-names = "target_data", "rt", "scfg";
46		reg = <0x00 0x43600000 0x00 0x10000>,
47		      <0x00 0x44880000 0x00 0x20000>,
48		      <0x00 0x44860000 0x00 0x20000>;
49		/*
50		 * Marked Disabled:
51		 * Node is incomplete as it is meant for bootloaders and
52		 * firmware on non-MPU processors
53		 */
54		status = "disabled";
55	};
56
57	mcu_ram: sram@41c00000 {
58		compatible = "mmio-sram";
59		reg = <0x00 0x41c00000 0x00 0x100000>;
60		ranges = <0x00 0x00 0x41c00000 0x100000>;
61		#address-cells = <1>;
62		#size-cells = <1>;
63	};
64
65	wkup_pmx0: pinctrl@4301c000 {
66		compatible = "pinctrl-single";
67		/* Proxy 0 addressing */
68		reg = <0x00 0x4301c000 0x00 0x034>;
69		#pinctrl-cells = <1>;
70		pinctrl-single,register-width = <32>;
71		pinctrl-single,function-mask = <0xffffffff>;
72	};
73
74	wkup_pmx1: pinctrl@4301c038 {
75		compatible = "pinctrl-single";
76		/* Proxy 0 addressing */
77		reg = <0x00 0x4301c038 0x00 0x02C>;
78		#pinctrl-cells = <1>;
79		pinctrl-single,register-width = <32>;
80		pinctrl-single,function-mask = <0xffffffff>;
81	};
82
83	wkup_pmx2: pinctrl@4301c068 {
84		compatible = "pinctrl-single";
85		/* Proxy 0 addressing */
86		reg = <0x00 0x4301c068 0x00 0x120>;
87		#pinctrl-cells = <1>;
88		pinctrl-single,register-width = <32>;
89		pinctrl-single,function-mask = <0xffffffff>;
90	};
91
92	wkup_pmx3: pinctrl@4301c190 {
93		compatible = "pinctrl-single";
94		/* Proxy 0 addressing */
95		reg = <0x00 0x4301c190 0x00 0x004>;
96		#pinctrl-cells = <1>;
97		pinctrl-single,register-width = <32>;
98		pinctrl-single,function-mask = <0xffffffff>;
99	};
100
101	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
102	mcu_timerio_input: pinctrl@40f04200 {
103		compatible = "pinctrl-single";
104		reg = <0x00 0x40f04200 0x00 0x28>;
105		#pinctrl-cells = <1>;
106		pinctrl-single,register-width = <32>;
107		pinctrl-single,function-mask = <0x0000000f>;
108		/* Non-MPU Firmware usage */
109		status = "reserved";
110	};
111
112	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
113	mcu_timerio_output: pinctrl@40f04280 {
114		compatible = "pinctrl-single";
115		reg = <0x00 0x40f04280 0x00 0x28>;
116		#pinctrl-cells = <1>;
117		pinctrl-single,register-width = <32>;
118		pinctrl-single,function-mask = <0x0000000f>;
119		/* Non-MPU Firmware usage */
120		status = "reserved";
121	};
122
123	wkup_gpio_intr: interrupt-controller@42200000 {
124		compatible = "ti,sci-intr";
125		reg = <0x00 0x42200000 0x00 0x400>;
126		ti,intr-trigger-type = <1>;
127		interrupt-controller;
128		interrupt-parent = <&gic500>;
129		#interrupt-cells = <1>;
130		ti,sci = <&sms>;
131		ti,sci-dev-id = <125>;
132		ti,interrupt-ranges = <16 960 16>;
133	};
134
135	mcu_conf: syscon@40f00000 {
136		compatible = "syscon", "simple-mfd";
137		reg = <0x0 0x40f00000 0x0 0x20000>;
138		#address-cells = <1>;
139		#size-cells = <1>;
140		ranges = <0x0 0x0 0x40f00000 0x20000>;
141
142		phy_gmii_sel: phy@4040 {
143			compatible = "ti,am654-phy-gmii-sel";
144			reg = <0x4040 0x4>;
145			#phy-cells = <1>;
146		};
147
148	};
149
150	mcu_timer0: timer@40400000 {
151		compatible = "ti,am654-timer";
152		reg = <0x00 0x40400000 0x00 0x400>;
153		interrupts = <GIC_SPI 816 IRQ_TYPE_LEVEL_HIGH>;
154		clocks = <&k3_clks 35 1>;
155		clock-names = "fck";
156		assigned-clocks = <&k3_clks 35 1>;
157		assigned-clock-parents = <&k3_clks 35 2>;
158		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
159		ti,timer-pwm;
160		/* Non-MPU Firmware usage */
161		status = "reserved";
162	};
163
164	mcu_timer1: timer@40410000 {
165		compatible = "ti,am654-timer";
166		reg = <0x00 0x40410000 0x00 0x400>;
167		interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
168		clocks = <&k3_clks 83 1>;
169		clock-names = "fck";
170		assigned-clocks = <&k3_clks 83 1>;
171		assigned-clock-parents = <&k3_clks 83 2>;
172		power-domains = <&k3_pds 83 TI_SCI_PD_EXCLUSIVE>;
173		ti,timer-pwm;
174		/* Non-MPU Firmware usage */
175		status = "reserved";
176	};
177
178	mcu_timer2: timer@40420000 {
179		compatible = "ti,am654-timer";
180		reg = <0x00 0x40420000 0x00 0x400>;
181		interrupts = <GIC_SPI 818 IRQ_TYPE_LEVEL_HIGH>;
182		clocks = <&k3_clks 84 1>;
183		clock-names = "fck";
184		assigned-clocks = <&k3_clks 84 1>;
185		assigned-clock-parents = <&k3_clks 84 2>;
186		power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>;
187		ti,timer-pwm;
188		/* Non-MPU Firmware usage */
189		status = "reserved";
190	};
191
192	mcu_timer3: timer@40430000 {
193		compatible = "ti,am654-timer";
194		reg = <0x00 0x40430000 0x00 0x400>;
195		interrupts = <GIC_SPI 819 IRQ_TYPE_LEVEL_HIGH>;
196		clocks = <&k3_clks 85 1>;
197		clock-names = "fck";
198		assigned-clocks = <&k3_clks 85 1>;
199		assigned-clock-parents = <&k3_clks 85 2>;
200		power-domains = <&k3_pds 85 TI_SCI_PD_EXCLUSIVE>;
201		ti,timer-pwm;
202		/* Non-MPU Firmware usage */
203		status = "reserved";
204	};
205
206	mcu_timer4: timer@40440000 {
207		compatible = "ti,am654-timer";
208		reg = <0x00 0x40440000 0x00 0x400>;
209		interrupts = <GIC_SPI 820 IRQ_TYPE_LEVEL_HIGH>;
210		clocks = <&k3_clks 86 1>;
211		clock-names = "fck";
212		assigned-clocks = <&k3_clks 86 1>;
213		assigned-clock-parents = <&k3_clks 86 2>;
214		power-domains = <&k3_pds 86 TI_SCI_PD_EXCLUSIVE>;
215		ti,timer-pwm;
216		/* Non-MPU Firmware usage */
217		status = "reserved";
218	};
219
220	mcu_timer5: timer@40450000 {
221		compatible = "ti,am654-timer";
222		reg = <0x00 0x40450000 0x00 0x400>;
223		interrupts = <GIC_SPI 821 IRQ_TYPE_LEVEL_HIGH>;
224		clocks = <&k3_clks 87 1>;
225		clock-names = "fck";
226		assigned-clocks = <&k3_clks 87 1>;
227		assigned-clock-parents = <&k3_clks 87 2>;
228		power-domains = <&k3_pds 87 TI_SCI_PD_EXCLUSIVE>;
229		ti,timer-pwm;
230		/* Non-MPU Firmware usage */
231		status = "reserved";
232	};
233
234	mcu_timer6: timer@40460000 {
235		compatible = "ti,am654-timer";
236		reg = <0x00 0x40460000 0x00 0x400>;
237		interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH>;
238		clocks = <&k3_clks 88 1>;
239		clock-names = "fck";
240		assigned-clocks = <&k3_clks 88 1>;
241		assigned-clock-parents = <&k3_clks 88 2>;
242		power-domains = <&k3_pds 88 TI_SCI_PD_EXCLUSIVE>;
243		ti,timer-pwm;
244		/* Non-MPU Firmware usage */
245		status = "reserved";
246	};
247
248	mcu_timer7: timer@40470000 {
249		compatible = "ti,am654-timer";
250		reg = <0x00 0x40470000 0x00 0x400>;
251		interrupts = <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>;
252		clocks = <&k3_clks 89 1>;
253		clock-names = "fck";
254		assigned-clocks = <&k3_clks 89 1>;
255		assigned-clock-parents = <&k3_clks 89 2>;
256		power-domains = <&k3_pds 89 TI_SCI_PD_EXCLUSIVE>;
257		ti,timer-pwm;
258		/* Non-MPU Firmware usage */
259		status = "reserved";
260	};
261
262	mcu_timer8: timer@40480000 {
263		compatible = "ti,am654-timer";
264		reg = <0x00 0x40480000 0x00 0x400>;
265		interrupts = <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>;
266		clocks = <&k3_clks 90 1>;
267		clock-names = "fck";
268		assigned-clocks = <&k3_clks 90 1>;
269		assigned-clock-parents = <&k3_clks 90 2>;
270		power-domains = <&k3_pds 90 TI_SCI_PD_EXCLUSIVE>;
271		ti,timer-pwm;
272		/* Non-MPU Firmware usage */
273		status = "reserved";
274	};
275
276	mcu_timer9: timer@40490000 {
277		compatible = "ti,am654-timer";
278		reg = <0x00 0x40490000 0x00 0x400>;
279		interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>;
280		clocks = <&k3_clks 91 1>;
281		clock-names = "fck";
282		assigned-clocks = <&k3_clks 91 1>;
283		assigned-clock-parents = <&k3_clks 91 2>;
284		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
285		ti,timer-pwm;
286		/* Non-MPU Firmware usage */
287		status = "reserved";
288	};
289
290	wkup_uart0: serial@42300000 {
291		compatible = "ti,j721e-uart", "ti,am654-uart";
292		reg = <0x00 0x42300000 0x00 0x200>;
293		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
294		current-speed = <115200>;
295		clocks = <&k3_clks 359 3>;
296		clock-names = "fclk";
297		power-domains = <&k3_pds 359 TI_SCI_PD_EXCLUSIVE>;
298		status = "disabled";
299	};
300
301	mcu_uart0: serial@40a00000 {
302		compatible = "ti,j721e-uart", "ti,am654-uart";
303		reg = <0x00 0x40a00000 0x00 0x200>;
304		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
305		current-speed = <115200>;
306		clocks = <&k3_clks 149 3>;
307		clock-names = "fclk";
308		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
309		status = "disabled";
310	};
311
312	wkup_gpio0: gpio@42110000 {
313		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
314		reg = <0x00 0x42110000 0x00 0x100>;
315		gpio-controller;
316		#gpio-cells = <2>;
317		interrupt-parent = <&wkup_gpio_intr>;
318		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
319		interrupt-controller;
320		#interrupt-cells = <2>;
321		ti,ngpio = <89>;
322		ti,davinci-gpio-unbanked = <0>;
323		power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
324		clocks = <&k3_clks 115 0>;
325		clock-names = "gpio";
326		status = "disabled";
327	};
328
329	wkup_gpio1: gpio@42100000 {
330		compatible = "ti,j721e-gpio", "ti,keystone-gpio";
331		reg = <0x00 0x42100000 0x00 0x100>;
332		gpio-controller;
333		#gpio-cells = <2>;
334		interrupt-parent = <&wkup_gpio_intr>;
335		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
336		interrupt-controller;
337		#interrupt-cells = <2>;
338		ti,ngpio = <89>;
339		ti,davinci-gpio-unbanked = <0>;
340		power-domains = <&k3_pds 116 TI_SCI_PD_EXCLUSIVE>;
341		clocks = <&k3_clks 116 0>;
342		clock-names = "gpio";
343		status = "disabled";
344	};
345
346	wkup_i2c0: i2c@42120000 {
347		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
348		reg = <0x00 0x42120000 0x00 0x100>;
349		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
350		#address-cells = <1>;
351		#size-cells = <0>;
352		clocks = <&k3_clks 223 1>;
353		clock-names = "fck";
354		power-domains = <&k3_pds 223 TI_SCI_PD_EXCLUSIVE>;
355		status = "disabled";
356	};
357
358	mcu_i2c0: i2c@40b00000 {
359		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
360		reg = <0x00 0x40b00000 0x00 0x100>;
361		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
362		#address-cells = <1>;
363		#size-cells = <0>;
364		clocks = <&k3_clks 221 1>;
365		clock-names = "fck";
366		power-domains = <&k3_pds 221 TI_SCI_PD_EXCLUSIVE>;
367		status = "disabled";
368	};
369
370	mcu_i2c1: i2c@40b10000 {
371		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
372		reg = <0x00 0x40b10000 0x00 0x100>;
373		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
374		#address-cells = <1>;
375		#size-cells = <0>;
376		clocks = <&k3_clks 222 1>;
377		clock-names = "fck";
378		power-domains = <&k3_pds 222 TI_SCI_PD_EXCLUSIVE>;
379		status = "disabled";
380	};
381
382	mcu_mcan0: can@40528000 {
383		compatible = "bosch,m_can";
384		reg = <0x00 0x40528000 0x00 0x200>,
385		      <0x00 0x40500000 0x00 0x8000>;
386		reg-names = "m_can", "message_ram";
387		power-domains = <&k3_pds 207 TI_SCI_PD_EXCLUSIVE>;
388		clocks = <&k3_clks 207 0>, <&k3_clks 207 1>;
389		clock-names = "hclk", "cclk";
390		interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>,
391			     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>;
392		interrupt-names = "int0", "int1";
393		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
394		status = "disabled";
395	};
396
397	mcu_mcan1: can@40568000 {
398		compatible = "bosch,m_can";
399		reg = <0x00 0x40568000 0x00 0x200>,
400		      <0x00 0x40540000 0x00 0x8000>;
401		reg-names = "m_can", "message_ram";
402		power-domains = <&k3_pds 208 TI_SCI_PD_EXCLUSIVE>;
403		clocks = <&k3_clks 208 0>, <&k3_clks 208 1>;
404		clock-names = "hclk", "cclk";
405		interrupts = <GIC_SPI 835 IRQ_TYPE_LEVEL_HIGH>,
406			     <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
407		interrupt-names = "int0", "int1";
408		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
409		status = "disabled";
410	};
411
412	mcu_spi0: spi@40300000 {
413		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
414		reg = <0x00 0x040300000 0x00 0x400>;
415		interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
416		#address-cells = <1>;
417		#size-cells = <0>;
418		power-domains = <&k3_pds 347 TI_SCI_PD_EXCLUSIVE>;
419		clocks = <&k3_clks 347 0>;
420		status = "disabled";
421	};
422
423	mcu_spi1: spi@40310000 {
424		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
425		reg = <0x00 0x040310000 0x00 0x400>;
426		interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
427		#address-cells = <1>;
428		#size-cells = <0>;
429		power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
430		clocks = <&k3_clks 348 0>;
431		status = "disabled";
432	};
433
434	mcu_spi2: spi@40320000 {
435		compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
436		reg = <0x00 0x040320000 0x00 0x400>;
437		interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
438		#address-cells = <1>;
439		#size-cells = <0>;
440		power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
441		clocks = <&k3_clks 349 0>;
442		status = "disabled";
443	};
444
445	mcu_navss: bus@28380000 {
446		compatible = "simple-mfd";
447		#address-cells = <2>;
448		#size-cells = <2>;
449		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
450		dma-coherent;
451		dma-ranges;
452
453		ti,sci-dev-id = <267>;
454
455		mcu_ringacc: ringacc@2b800000 {
456			compatible = "ti,am654-navss-ringacc";
457			reg = <0x0 0x2b800000 0x0 0x400000>,
458			      <0x0 0x2b000000 0x0 0x400000>,
459			      <0x0 0x28590000 0x0 0x100>,
460			      <0x0 0x2a500000 0x0 0x40000>,
461			      <0x0 0x28440000 0x0 0x40000>;
462			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
463			ti,num-rings = <286>;
464			ti,sci-rm-range-gp-rings = <0x1>;
465			ti,sci = <&sms>;
466			ti,sci-dev-id = <272>;
467			msi-parent = <&main_udmass_inta>;
468		};
469
470		mcu_udmap: dma-controller@285c0000 {
471			compatible = "ti,j721e-navss-mcu-udmap";
472			reg = <0x0 0x285c0000 0x0 0x100>,
473			      <0x0 0x2a800000 0x0 0x40000>,
474			      <0x0 0x2aa00000 0x0 0x40000>;
475			reg-names = "gcfg", "rchanrt", "tchanrt";
476			msi-parent = <&main_udmass_inta>;
477			#dma-cells = <1>;
478
479			ti,sci = <&sms>;
480			ti,sci-dev-id = <273>;
481			ti,ringacc = <&mcu_ringacc>;
482			ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
483						<0x0f>; /* TX_HCHAN */
484			ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
485						<0x0b>; /* RX_HCHAN */
486			ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
487		};
488	};
489
490	secure_proxy_mcu: mailbox@2a480000 {
491		compatible = "ti,am654-secure-proxy";
492		#mbox-cells = <1>;
493		reg-names = "target_data", "rt", "scfg";
494		reg = <0x00 0x2a480000 0x00 0x80000>,
495		      <0x00 0x2a380000 0x00 0x80000>,
496		      <0x00 0x2a400000 0x00 0x80000>;
497		/*
498		 * Marked Disabled:
499		 * Node is incomplete as it is meant for bootloaders and
500		 * firmware on non-MPU processors
501		 */
502		status = "disabled";
503	};
504
505	mcu_cpsw: ethernet@46000000 {
506		compatible = "ti,j721e-cpsw-nuss";
507		#address-cells = <2>;
508		#size-cells = <2>;
509		reg = <0x0 0x46000000 0x0 0x200000>;
510		reg-names = "cpsw_nuss";
511		ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
512		dma-coherent;
513		clocks = <&k3_clks 29 28>;
514		clock-names = "fck";
515		power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>;
516
517		dmas = <&mcu_udmap 0xf000>,
518		       <&mcu_udmap 0xf001>,
519		       <&mcu_udmap 0xf002>,
520		       <&mcu_udmap 0xf003>,
521		       <&mcu_udmap 0xf004>,
522		       <&mcu_udmap 0xf005>,
523		       <&mcu_udmap 0xf006>,
524		       <&mcu_udmap 0xf007>,
525		       <&mcu_udmap 0x7000>;
526		dma-names = "tx0", "tx1", "tx2", "tx3",
527			    "tx4", "tx5", "tx6", "tx7",
528			    "rx";
529
530		ethernet-ports {
531			#address-cells = <1>;
532			#size-cells = <0>;
533
534			cpsw_port1: port@1 {
535				reg = <1>;
536				ti,mac-only;
537				label = "port1";
538				ti,syscon-efuse = <&mcu_conf 0x200>;
539				phys = <&phy_gmii_sel 1>;
540			};
541		};
542
543		davinci_mdio: mdio@f00 {
544			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
545			reg = <0x0 0xf00 0x0 0x100>;
546			#address-cells = <1>;
547			#size-cells = <0>;
548			clocks = <&k3_clks 29 28>;
549			clock-names = "fck";
550			bus_freq = <1000000>;
551		};
552
553		cpts@3d000 {
554			compatible = "ti,am65-cpts";
555			reg = <0x0 0x3d000 0x0 0x400>;
556			clocks = <&k3_clks 29 3>;
557			clock-names = "cpts";
558			assigned-clocks = <&k3_clks 29 3>; /* CPTS_RFT_CLK */
559			assigned-clock-parents = <&k3_clks 29 5>; /* MAIN_0_HSDIVOUT6_CLK */
560			interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
561			interrupt-names = "cpts";
562			ti,cpts-ext-ts-inputs = <4>;
563			ti,cpts-periodic-outputs = <2>;
564		};
565	};
566
567	tscadc0: tscadc@40200000 {
568		compatible = "ti,am3359-tscadc";
569		reg = <0x00 0x40200000 0x00 0x1000>;
570		interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
571		power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>;
572		clocks = <&k3_clks 0 0>;
573		assigned-clocks = <&k3_clks 0 2>;
574		assigned-clock-rates = <60000000>;
575		clock-names = "fck";
576		dmas = <&main_udmap 0x7400>,
577			<&main_udmap 0x7401>;
578		dma-names = "fifo0", "fifo1";
579		status = "disabled";
580
581		adc {
582			#io-channel-cells = <1>;
583			compatible = "ti,am3359-adc";
584		};
585	};
586
587	tscadc1: tscadc@40210000 {
588		compatible = "ti,am3359-tscadc";
589		reg = <0x00 0x40210000 0x00 0x1000>;
590		interrupts = <GIC_SPI 861 IRQ_TYPE_LEVEL_HIGH>;
591		power-domains = <&k3_pds 1 TI_SCI_PD_EXCLUSIVE>;
592		clocks = <&k3_clks 1 0>;
593		assigned-clocks = <&k3_clks 1 2>;
594		assigned-clock-rates = <60000000>;
595		clock-names = "fck";
596		dmas = <&main_udmap 0x7402>,
597			<&main_udmap 0x7403>;
598		dma-names = "fifo0", "fifo1";
599		status = "disabled";
600
601		adc {
602			#io-channel-cells = <1>;
603			compatible = "ti,am3359-adc";
604		};
605	};
606
607	fss: bus@47000000 {
608		compatible = "simple-bus";
609		#address-cells = <2>;
610		#size-cells = <2>;
611		ranges = <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
612			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
613			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
614
615		ospi0: spi@47040000 {
616			compatible = "ti,am654-ospi", "cdns,qspi-nor";
617			reg = <0x00 0x47040000 0x00 0x100>,
618			      <0x05 0x00000000 0x01 0x00000000>;
619			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
620			cdns,fifo-depth = <256>;
621			cdns,fifo-width = <4>;
622			cdns,trigger-address = <0x0>;
623			clocks = <&k3_clks 109 5>;
624			assigned-clocks = <&k3_clks 109 5>;
625			assigned-clock-parents = <&k3_clks 109 7>;
626			assigned-clock-rates = <166666666>;
627			power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
628			#address-cells = <1>;
629			#size-cells = <0>;
630
631			status = "disabled"; /* Needs pinmux */
632		};
633
634		ospi1: spi@47050000 {
635			compatible = "ti,am654-ospi", "cdns,qspi-nor";
636			reg = <0x00 0x47050000 0x00 0x100>,
637			      <0x07 0x00000000 0x01 0x00000000>;
638			interrupts = <GIC_SPI 841 IRQ_TYPE_LEVEL_HIGH>;
639			cdns,fifo-depth = <256>;
640			cdns,fifo-width = <4>;
641			cdns,trigger-address = <0x0>;
642			clocks = <&k3_clks 110 5>;
643			power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
644			#address-cells = <1>;
645			#size-cells = <0>;
646
647			status = "disabled"; /* Needs pinmux */
648		};
649	};
650
651	wkup_vtm0: temperature-sensor@42040000 {
652		compatible = "ti,j7200-vtm";
653		reg = <0x00 0x42040000 0x0 0x350>,
654		      <0x00 0x42050000 0x0 0x350>;
655		power-domains = <&k3_pds 154 TI_SCI_PD_SHARED>;
656		#thermal-sensor-cells = <1>;
657	};
658};
659