1// SPDX-License-Identifier: GPL-2.0-only OR MIT 2/* 3 * Copyright (C) 2016-2024 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5 6/dts-v1/; 7 8#include "k3-am654.dtsi" 9#include <dt-bindings/input/input.h> 10#include <dt-bindings/net/ti-dp83867.h> 11 12/ { 13 compatible = "ti,am654-evm", "ti,am654"; 14 model = "Texas Instruments AM654 Base Board"; 15 16 aliases { 17 serial0 = &wkup_uart0; 18 serial1 = &mcu_uart0; 19 serial2 = &main_uart0; 20 i2c0 = &wkup_i2c0; 21 i2c1 = &mcu_i2c0; 22 i2c2 = &main_i2c0; 23 i2c3 = &main_i2c1; 24 i2c4 = &main_i2c2; 25 ethernet0 = &cpsw_port1; 26 mmc0 = &sdhci0; 27 mmc1 = &sdhci1; 28 }; 29 30 chosen { 31 stdout-path = "serial2:115200n8"; 32 }; 33 34 memory@80000000 { 35 device_type = "memory"; 36 /* 4G RAM */ 37 reg = <0x00000000 0x80000000 0x00000000 0x80000000>, 38 <0x00000008 0x80000000 0x00000000 0x80000000>; 39 }; 40 41 reserved-memory { 42 #address-cells = <2>; 43 #size-cells = <2>; 44 ranges; 45 46 secure_ddr: secure-ddr@9e800000 { 47 reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */ 48 alignment = <0x1000>; 49 no-map; 50 }; 51 52 mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { 53 compatible = "shared-dma-pool"; 54 reg = <0 0xa0000000 0 0x100000>; 55 no-map; 56 }; 57 58 mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { 59 compatible = "shared-dma-pool"; 60 reg = <0 0xa0100000 0 0xf00000>; 61 no-map; 62 }; 63 64 mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { 65 compatible = "shared-dma-pool"; 66 reg = <0 0xa1000000 0 0x100000>; 67 no-map; 68 }; 69 70 mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { 71 compatible = "shared-dma-pool"; 72 reg = <0 0xa1100000 0 0xf00000>; 73 no-map; 74 }; 75 76 rtos_ipc_memory_region: ipc-memories@a2000000 { 77 reg = <0x00 0xa2000000 0x00 0x00100000>; 78 alignment = <0x1000>; 79 no-map; 80 }; 81 }; 82 83 gpio-keys { 84 compatible = "gpio-keys"; 85 autorepeat; 86 pinctrl-names = "default"; 87 pinctrl-0 = <&push_button_pins_default>; 88 89 switch-5 { 90 label = "GPIO Key USER1"; 91 linux,code = <BTN_0>; 92 gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>; 93 }; 94 95 switch-6 { 96 label = "GPIO Key USER2"; 97 linux,code = <BTN_1>; 98 gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; 99 }; 100 }; 101 102 evm_12v0: regulator-0 { 103 /* main supply */ 104 compatible = "regulator-fixed"; 105 regulator-name = "evm_12v0"; 106 regulator-min-microvolt = <12000000>; 107 regulator-max-microvolt = <12000000>; 108 regulator-always-on; 109 regulator-boot-on; 110 }; 111 112 vcc3v3_io: regulator-1 { 113 /* Output of TPS54334 */ 114 compatible = "regulator-fixed"; 115 regulator-name = "vcc3v3_io"; 116 regulator-min-microvolt = <3300000>; 117 regulator-max-microvolt = <3300000>; 118 regulator-always-on; 119 regulator-boot-on; 120 vin-supply = <&evm_12v0>; 121 }; 122 123 vdd_mmc1_sd: regulator-2 { 124 compatible = "regulator-fixed"; 125 regulator-name = "vdd_mmc1_sd"; 126 regulator-min-microvolt = <3300000>; 127 regulator-max-microvolt = <3300000>; 128 regulator-boot-on; 129 enable-active-high; 130 vin-supply = <&vcc3v3_io>; 131 gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>; 132 }; 133 134 vtt_supply: regulator-3 { 135 compatible = "regulator-fixed"; 136 regulator-name = "vtt"; 137 pinctrl-names = "default"; 138 pinctrl-0 = <&ddr_vtt_pins_default>; 139 regulator-min-microvolt = <3300000>; 140 regulator-max-microvolt = <3300000>; 141 enable-active-high; 142 regulator-always-on; 143 regulator-boot-on; 144 vin-supply = <&vcc3v3_io>; 145 gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>; 146 }; 147}; 148 149&wkup_pmx0 { 150 wkup_uart0_pins_default: wkup-uart0-default-pins { 151 pinctrl-single,pins = < 152 AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0) /* (AB1) WKUP_UART0_RXD */ 153 AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5) WKUP_UART0_TXD */ 154 AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */ 155 AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */ 156 >; 157 }; 158 159 ddr_vtt_pins_default: ddr-vtt-default-pins { 160 pinctrl-single,pins = < 161 AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */ 162 >; 163 }; 164 165 wkup_i2c0_pins_default: wkup-i2c0-default-pins { 166 pinctrl-single,pins = < 167 AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */ 168 AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ 169 >; 170 }; 171 172 push_button_pins_default: push-button-default-pins { 173 pinctrl-single,pins = < 174 AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */ 175 AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ 176 >; 177 }; 178 179 mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { 180 pinctrl-single,pins = < 181 AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */ 182 AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */ 183 AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* (U4) MCU_OSPI0_D0 */ 184 AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* (U5) MCU_OSPI0_D1 */ 185 AM65X_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* (T2) MCU_OSPI0_D2 */ 186 AM65X_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* (T3) MCU_OSPI0_D3 */ 187 AM65X_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* (T4) MCU_OSPI0_D4 */ 188 AM65X_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* (T5) MCU_OSPI0_D5 */ 189 AM65X_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* (R2) MCU_OSPI0_D6 */ 190 AM65X_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* (R3) MCU_OSPI0_D7 */ 191 AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */ 192 >; 193 }; 194 195 wkup_pca554_default: wkup-pca554-default-pins { 196 pinctrl-single,pins = < 197 AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */ 198 >; 199 }; 200 201 mcu_uart0_pins_default: mcu-uart0-default-pins { 202 pinctrl-single,pins = < 203 AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) /* (P4) MCU_OSPI1_D1.MCU_UART0_RXD */ 204 AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) /* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */ 205 AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) /* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */ 206 AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) /* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */ 207 >; 208 }; 209 210 mcu_cpsw_pins_default: mcu-cpsw-default-pins { 211 pinctrl-single,pins = < 212 AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */ 213 AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */ 214 AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */ 215 AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */ 216 AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */ 217 AM65X_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */ 218 AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */ 219 AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */ 220 AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */ 221 AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */ 222 AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */ 223 AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */ 224 >; 225 }; 226 227 mcu_mdio_pins_default: mcu-mdio1-default-pins { 228 pinctrl-single,pins = < 229 AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */ 230 AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */ 231 >; 232 }; 233 234 mcu_i2c0_pins_default: mcu-i2c0-default-pins { 235 pinctrl-single,pins = < 236 AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) /* (AD8) MCU_I2C0_SCL */ 237 AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) /* (AD7) MCU_I2C0_SDA */ 238 >; 239 }; 240}; 241 242&main_pmx0 { 243 main_uart0_pins_default: main-uart0-default-pins { 244 pinctrl-single,pins = < 245 AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */ 246 AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */ 247 AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */ 248 AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */ 249 >; 250 }; 251 252 main_i2c2_pins_default: main-i2c2-default-pins { 253 pinctrl-single,pins = < 254 AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */ 255 AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */ 256 >; 257 }; 258 259 main_spi0_pins_default: main-spi0-default-pins { 260 pinctrl-single,pins = < 261 AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */ 262 AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */ 263 AM65X_IOPAD(0x01cc, PIN_INPUT, 0) /* (AD13) SPI0_D1 */ 264 AM65X_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (AG13) SPI0_CS0 */ 265 >; 266 }; 267 268 main_mmc0_pins_default: main-mmc0-default-pins { 269 pinctrl-single,pins = < 270 AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */ 271 AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */ 272 AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */ 273 AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */ 274 AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */ 275 AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */ 276 AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */ 277 AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */ 278 AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */ 279 AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */ 280 AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */ 281 AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */ 282 >; 283 }; 284 285 main_mmc1_pins_default: main-mmc1-default-pins { 286 pinctrl-single,pins = < 287 AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ 288 AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ 289 AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ 290 AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ 291 AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ 292 AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ 293 AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ 294 AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ 295 >; 296 }; 297 298 usb1_pins_default: usb1-default-pins { 299 pinctrl-single,pins = < 300 AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ 301 >; 302 }; 303}; 304 305&main_pmx1 { 306 main_i2c0_pins_default: main-i2c0-default-pins { 307 pinctrl-single,pins = < 308 AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */ 309 AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */ 310 >; 311 }; 312 313 main_i2c1_pins_default: main-i2c1-default-pins { 314 pinctrl-single,pins = < 315 AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */ 316 AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ 317 >; 318 }; 319 320 ecap0_pins_default: ecap0-default-pins { 321 pinctrl-single,pins = < 322 AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ 323 >; 324 }; 325}; 326 327&wkup_uart0 { 328 /* Wakeup UART is used by System firmware */ 329 status = "reserved"; 330 pinctrl-names = "default"; 331 pinctrl-0 = <&wkup_uart0_pins_default>; 332}; 333 334&mcu_uart0 { 335 status = "okay"; 336 pinctrl-names = "default"; 337 pinctrl-0 = <&mcu_uart0_pins_default>; 338}; 339 340&main_uart0 { 341 status = "okay"; 342 pinctrl-names = "default"; 343 pinctrl-0 = <&main_uart0_pins_default>; 344 power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; 345}; 346 347&wkup_i2c0 { 348 status = "okay"; 349 pinctrl-names = "default"; 350 pinctrl-0 = <&wkup_i2c0_pins_default>; 351 clock-frequency = <400000>; 352 353 eeprom@50 { 354 /* AT24CM01 */ 355 compatible = "atmel,24c1024"; 356 reg = <0x50>; 357 }; 358 359 vdd_mpu: regulator@60 { 360 compatible = "ti,tps62363"; 361 reg = <0x60>; 362 regulator-name = "VDD_MPU"; 363 regulator-min-microvolt = <500000>; 364 regulator-max-microvolt = <1770000>; 365 regulator-always-on; 366 regulator-boot-on; 367 ti,vsel0-state-high; 368 ti,vsel1-state-high; 369 ti,enable-vout-discharge; 370 }; 371 372 gpio@38 { 373 compatible = "nxp,pca9554"; 374 reg = <0x38>; 375 gpio-controller; 376 #gpio-cells = <2>; 377 }; 378 379 pca9554: gpio@39 { 380 compatible = "nxp,pca9554"; 381 reg = <0x39>; 382 gpio-controller; 383 #gpio-cells = <2>; 384 pinctrl-names = "default"; 385 pinctrl-0 = <&wkup_pca554_default>; 386 interrupt-parent = <&wkup_gpio0>; 387 interrupts = <25 IRQ_TYPE_EDGE_FALLING>; 388 interrupt-controller; 389 #interrupt-cells = <2>; 390 }; 391}; 392 393&mcu_i2c0 { 394 status = "okay"; 395 pinctrl-names = "default"; 396 pinctrl-0 = <&mcu_i2c0_pins_default>; 397 clock-frequency = <400000>; 398}; 399 400&main_i2c0 { 401 status = "okay"; 402 pinctrl-names = "default"; 403 pinctrl-0 = <&main_i2c0_pins_default>; 404 clock-frequency = <400000>; 405 406 pca9555: gpio@21 { 407 compatible = "nxp,pca9555"; 408 reg = <0x21>; 409 gpio-controller; 410 #gpio-cells = <2>; 411 }; 412}; 413 414&main_i2c1 { 415 status = "okay"; 416 pinctrl-names = "default"; 417 pinctrl-0 = <&main_i2c1_pins_default>; 418 clock-frequency = <400000>; 419}; 420 421&main_i2c2 { 422 status = "okay"; 423 pinctrl-names = "default"; 424 pinctrl-0 = <&main_i2c2_pins_default>; 425 clock-frequency = <400000>; 426}; 427 428&ecap0 { 429 status = "okay"; 430 pinctrl-names = "default"; 431 pinctrl-0 = <&ecap0_pins_default>; 432}; 433 434&main_spi0 { 435 status = "okay"; 436 pinctrl-names = "default"; 437 pinctrl-0 = <&main_spi0_pins_default>; 438 #address-cells = <1>; 439 #size-cells = <0>; 440 ti,pindir-d0-out-d1-in; 441 442 flash@0 { 443 compatible = "jedec,spi-nor"; 444 reg = <0x0>; 445 spi-tx-bus-width = <1>; 446 spi-rx-bus-width = <1>; 447 spi-max-frequency = <48000000>; 448 }; 449}; 450 451&sdhci0 { 452 status = "okay"; 453 pinctrl-names = "default"; 454 pinctrl-0 = <&main_mmc0_pins_default>; 455 bus-width = <8>; 456 non-removable; 457 ti,driver-strength-ohm = <50>; 458 disable-wp; 459}; 460 461/* 462 * Because of erratas i2025 and i2026 for silicon revision 1.0, the 463 * SD card interface might fail. Boards with sr1.0 are recommended to 464 * disable sdhci1 465 */ 466&sdhci1 { 467 status = "okay"; 468 vmmc-supply = <&vdd_mmc1_sd>; 469 pinctrl-names = "default"; 470 pinctrl-0 = <&main_mmc1_pins_default>; 471 ti,driver-strength-ohm = <50>; 472 disable-wp; 473}; 474 475&usb1 { 476 pinctrl-names = "default"; 477 pinctrl-0 = <&usb1_pins_default>; 478 dr_mode = "otg"; 479}; 480 481&dwc3_0 { 482 status = "disabled"; 483}; 484 485&usb0_phy { 486 status = "disabled"; 487}; 488 489&tscadc0 { 490 status = "okay"; 491 adc { 492 ti,adc-channels = <0 1 2 3 4 5 6 7>; 493 }; 494}; 495 496&tscadc1 { 497 status = "okay"; 498 adc { 499 ti,adc-channels = <0 1 2 3 4 5 6 7>; 500 }; 501}; 502 503&serdes0 { 504 status = "disabled"; 505}; 506 507&serdes1 { 508 status = "disabled"; 509}; 510 511&mailbox0_cluster0 { 512 status = "okay"; 513 interrupts = <436>; 514 515 mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { 516 ti,mbox-tx = <1 0 0>; 517 ti,mbox-rx = <0 0 0>; 518 }; 519}; 520 521&mailbox0_cluster1 { 522 status = "okay"; 523 interrupts = <432>; 524 525 mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { 526 ti,mbox-tx = <1 0 0>; 527 ti,mbox-rx = <0 0 0>; 528 }; 529}; 530 531&mcu_r5fss0_core0 { 532 memory-region = <&mcu_r5fss0_core0_dma_memory_region>, 533 <&mcu_r5fss0_core0_memory_region>; 534 mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; 535}; 536 537&mcu_r5fss0_core1 { 538 memory-region = <&mcu_r5fss0_core1_dma_memory_region>, 539 <&mcu_r5fss0_core1_memory_region>; 540 mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>; 541}; 542 543&ospi0 { 544 status = "okay"; 545 pinctrl-names = "default"; 546 pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; 547 548 flash@0 { 549 compatible = "jedec,spi-nor"; 550 reg = <0x0>; 551 spi-tx-bus-width = <8>; 552 spi-rx-bus-width = <8>; 553 spi-max-frequency = <25000000>; 554 cdns,tshsl-ns = <60>; 555 cdns,tsd2d-ns = <60>; 556 cdns,tchsh-ns = <60>; 557 cdns,tslch-ns = <60>; 558 cdns,read-delay = <0>; 559 560 partitions { 561 compatible = "fixed-partitions"; 562 #address-cells = <1>; 563 #size-cells = <1>; 564 565 partition@0 { 566 label = "ospi.tiboot3"; 567 reg = <0x0 0x80000>; 568 }; 569 570 partition@80000 { 571 label = "ospi.tispl"; 572 reg = <0x80000 0x200000>; 573 }; 574 575 partition@280000 { 576 label = "ospi.u-boot"; 577 reg = <0x280000 0x400000>; 578 }; 579 580 partition@680000 { 581 label = "ospi.env"; 582 reg = <0x680000 0x20000>; 583 }; 584 585 partition@6a0000 { 586 label = "ospi.env.backup"; 587 reg = <0x6a0000 0x20000>; 588 }; 589 590 partition@6c0000 { 591 label = "ospi.sysfw"; 592 reg = <0x6c0000 0x100000>; 593 }; 594 595 partition@800000 { 596 label = "ospi.rootfs"; 597 reg = <0x800000 0x37c0000>; 598 }; 599 600 partition@3fe0000 { 601 label = "ospi.phypattern"; 602 reg = <0x3fe0000 0x20000>; 603 }; 604 }; 605 }; 606}; 607 608&mcu_cpsw { 609 pinctrl-names = "default"; 610 pinctrl-0 = <&mcu_cpsw_pins_default>; 611}; 612 613&davinci_mdio { 614 status = "okay"; 615 pinctrl-names = "default"; 616 pinctrl-0 = <&mcu_mdio_pins_default>; 617 618 phy0: ethernet-phy@0 { 619 reg = <0>; 620 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 621 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 622 }; 623}; 624 625&cpsw_port1 { 626 phy-mode = "rgmii-rxid"; 627 phy-handle = <&phy0>; 628}; 629 630&dss { 631 status = "disabled"; 632}; 633