1// SPDX-License-Identifier: GPL-2.0-only OR MIT 2/* 3 * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/ 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/phy/phy.h> 9#include <dt-bindings/leds/common.h> 10#include <dt-bindings/gpio/gpio.h> 11#include <dt-bindings/net/ti-dp83867.h> 12#include "k3-am642.dtsi" 13 14#include "k3-serdes.h" 15 16/ { 17 compatible = "ti,am642-evm", "ti,am642"; 18 model = "Texas Instruments AM642 EVM"; 19 20 chosen { 21 stdout-path = &main_uart0; 22 }; 23 24 aliases { 25 serial0 = &mcu_uart0; 26 serial1 = &main_uart1; 27 serial2 = &main_uart0; 28 serial3 = &main_uart3; 29 i2c0 = &main_i2c0; 30 i2c1 = &main_i2c1; 31 mmc0 = &sdhci0; 32 mmc1 = &sdhci1; 33 ethernet0 = &cpsw_port1; 34 ethernet1 = &cpsw_port2; 35 ethernet2 = &icssg1_emac0; 36 }; 37 38 memory@80000000 { 39 bootph-all; 40 device_type = "memory"; 41 /* 2G RAM */ 42 reg = <0x00000000 0x80000000 0x00000000 0x80000000>; 43 }; 44 45 reserved-memory { 46 #address-cells = <2>; 47 #size-cells = <2>; 48 ranges; 49 50 secure_ddr: optee@9e800000 { 51 reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */ 52 alignment = <0x1000>; 53 no-map; 54 }; 55 56 main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { 57 compatible = "shared-dma-pool"; 58 reg = <0x00 0xa0000000 0x00 0x100000>; 59 no-map; 60 }; 61 62 main_r5fss0_core0_memory_region: r5f-memory@a0100000 { 63 compatible = "shared-dma-pool"; 64 reg = <0x00 0xa0100000 0x00 0xf00000>; 65 no-map; 66 }; 67 68 main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { 69 compatible = "shared-dma-pool"; 70 reg = <0x00 0xa1000000 0x00 0x100000>; 71 no-map; 72 }; 73 74 main_r5fss0_core1_memory_region: r5f-memory@a1100000 { 75 compatible = "shared-dma-pool"; 76 reg = <0x00 0xa1100000 0x00 0xf00000>; 77 no-map; 78 }; 79 80 main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { 81 compatible = "shared-dma-pool"; 82 reg = <0x00 0xa2000000 0x00 0x100000>; 83 no-map; 84 }; 85 86 main_r5fss1_core0_memory_region: r5f-memory@a2100000 { 87 compatible = "shared-dma-pool"; 88 reg = <0x00 0xa2100000 0x00 0xf00000>; 89 no-map; 90 }; 91 92 main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { 93 compatible = "shared-dma-pool"; 94 reg = <0x00 0xa3000000 0x00 0x100000>; 95 no-map; 96 }; 97 98 main_r5fss1_core1_memory_region: r5f-memory@a3100000 { 99 compatible = "shared-dma-pool"; 100 reg = <0x00 0xa3100000 0x00 0xf00000>; 101 no-map; 102 }; 103 104 rtos_ipc_memory_region: ipc-memories@a5000000 { 105 reg = <0x00 0xa5000000 0x00 0x00800000>; 106 alignment = <0x1000>; 107 no-map; 108 }; 109 }; 110 111 evm_12v0: regulator-0 { 112 /* main DC jack */ 113 bootph-all; 114 compatible = "regulator-fixed"; 115 regulator-name = "evm_12v0"; 116 regulator-min-microvolt = <12000000>; 117 regulator-max-microvolt = <12000000>; 118 regulator-always-on; 119 regulator-boot-on; 120 }; 121 122 vsys_5v0: regulator-1 { 123 /* output of LM5140 */ 124 compatible = "regulator-fixed"; 125 regulator-name = "vsys_5v0"; 126 regulator-min-microvolt = <5000000>; 127 regulator-max-microvolt = <5000000>; 128 vin-supply = <&evm_12v0>; 129 regulator-always-on; 130 regulator-boot-on; 131 }; 132 133 vsys_3v3: regulator-2 { 134 /* output of LM5140 */ 135 bootph-all; 136 compatible = "regulator-fixed"; 137 regulator-name = "vsys_3v3"; 138 regulator-min-microvolt = <3300000>; 139 regulator-max-microvolt = <3300000>; 140 vin-supply = <&evm_12v0>; 141 regulator-always-on; 142 regulator-boot-on; 143 }; 144 145 vdd_mmc1: regulator-3 { 146 /* TPS2051BD */ 147 bootph-all; 148 compatible = "regulator-fixed"; 149 regulator-name = "vdd_mmc1"; 150 regulator-min-microvolt = <3300000>; 151 regulator-max-microvolt = <3300000>; 152 regulator-boot-on; 153 enable-active-high; 154 vin-supply = <&vsys_3v3>; 155 gpio = <&exp1 6 GPIO_ACTIVE_HIGH>; 156 }; 157 158 vddb: regulator-4 { 159 compatible = "regulator-fixed"; 160 regulator-name = "vddb_3v3_display"; 161 regulator-min-microvolt = <3300000>; 162 regulator-max-microvolt = <3300000>; 163 vin-supply = <&vsys_3v3>; 164 regulator-always-on; 165 regulator-boot-on; 166 }; 167 168 vtt_supply: regulator-5 { 169 bootph-all; 170 compatible = "regulator-fixed"; 171 regulator-name = "vtt"; 172 pinctrl-names = "default"; 173 pinctrl-0 = <&ddr_vtt_pins_default>; 174 regulator-min-microvolt = <3300000>; 175 regulator-max-microvolt = <3300000>; 176 gpio = <&main_gpio0 12 GPIO_ACTIVE_HIGH>; 177 vin-supply = <&vsys_3v3>; 178 enable-active-high; 179 regulator-always-on; 180 regulator-boot-on; 181 }; 182 183 leds { 184 compatible = "gpio-leds"; 185 186 led-0 { 187 label = "am64-evm:red:heartbeat"; 188 gpios = <&exp1 16 GPIO_ACTIVE_HIGH>; 189 linux,default-trigger = "heartbeat"; 190 function = LED_FUNCTION_HEARTBEAT; 191 default-state = "off"; 192 }; 193 }; 194 195 mdio_mux: mux-controller { 196 compatible = "gpio-mux"; 197 #mux-control-cells = <0>; 198 199 mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>; 200 }; 201 202 mdio_mux_1: mdio-mux-1 { 203 compatible = "mdio-mux-multiplexer"; 204 mux-controls = <&mdio_mux>; 205 mdio-parent-bus = <&cpsw3g_mdio>; 206 #address-cells = <1>; 207 #size-cells = <0>; 208 209 mdio@1 { 210 reg = <0x1>; 211 #address-cells = <1>; 212 #size-cells = <0>; 213 214 cpsw3g_phy3: ethernet-phy@3 { 215 reg = <3>; 216 }; 217 }; 218 }; 219 220 transceiver1: can-phy0 { 221 compatible = "ti,tcan1042"; 222 #phy-cells = <0>; 223 max-bitrate = <5000000>; 224 standby-gpios = <&exp1 8 GPIO_ACTIVE_HIGH>; 225 }; 226 227 transceiver2: can-phy1 { 228 compatible = "ti,tcan1042"; 229 #phy-cells = <0>; 230 max-bitrate = <5000000>; 231 standby-gpios = <&exp1 9 GPIO_ACTIVE_HIGH>; 232 }; 233 234 icssg1_eth: icssg1-eth { 235 compatible = "ti,am642-icssg-prueth"; 236 pinctrl-names = "default"; 237 pinctrl-0 = <&icssg1_rgmii1_pins_default>; 238 sram = <&oc_sram>; 239 ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>; 240 firmware-name = "ti-pruss/am64x-sr2-pru0-prueth-fw.elf", 241 "ti-pruss/am64x-sr2-rtu0-prueth-fw.elf", 242 "ti-pruss/am64x-sr2-txpru0-prueth-fw.elf", 243 "ti-pruss/am64x-sr2-pru1-prueth-fw.elf", 244 "ti-pruss/am64x-sr2-rtu1-prueth-fw.elf", 245 "ti-pruss/am64x-sr2-txpru1-prueth-fw.elf"; 246 247 ti,pruss-gp-mux-sel = <2>, /* MII mode */ 248 <2>, 249 <2>, 250 <2>, /* MII mode */ 251 <2>, 252 <2>; 253 ti,mii-g-rt = <&icssg1_mii_g_rt>; 254 ti,mii-rt = <&icssg1_mii_rt>; 255 ti,iep = <&icssg1_iep0>, <&icssg1_iep1>; 256 interrupt-parent = <&icssg1_intc>; 257 interrupts = <24 0 2>, <25 1 3>; 258 interrupt-names = "tx_ts0", "tx_ts1"; 259 dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */ 260 <&main_pktdma 0xc201 15>, /* egress slice 0 */ 261 <&main_pktdma 0xc202 15>, /* egress slice 0 */ 262 <&main_pktdma 0xc203 15>, /* egress slice 0 */ 263 <&main_pktdma 0xc204 15>, /* egress slice 1 */ 264 <&main_pktdma 0xc205 15>, /* egress slice 1 */ 265 <&main_pktdma 0xc206 15>, /* egress slice 1 */ 266 <&main_pktdma 0xc207 15>, /* egress slice 1 */ 267 <&main_pktdma 0x4200 15>, /* ingress slice 0 */ 268 <&main_pktdma 0x4201 15>; /* ingress slice 1 */ 269 dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", 270 "tx1-0", "tx1-1", "tx1-2", "tx1-3", 271 "rx0", "rx1"; 272 273 ethernet-ports { 274 #address-cells = <1>; 275 #size-cells = <0>; 276 icssg1_emac0: port@0 { 277 reg = <0>; 278 phy-handle = <&icssg1_phy1>; 279 phy-mode = "rgmii-id"; 280 /* Filled in by bootloader */ 281 local-mac-address = [00 00 00 00 00 00]; 282 }; 283 icssg1_emac1: port@1 { 284 reg = <1>; 285 /* Filled in by bootloader */ 286 local-mac-address = [00 00 00 00 00 00]; 287 status = "disabled"; 288 }; 289 }; 290 }; 291}; 292 293&main_pmx0 { 294 main_mmc1_pins_default: main-mmc1-default-pins { 295 pinctrl-single,pins = < 296 AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */ 297 AM64X_IOPAD(0x028c, PIN_INPUT_PULLDOWN, 0) /* (L20) MMC1_CLK */ 298 AM64X_IOPAD(0x0288, PIN_INPUT_PULLUP, 0) /* (K21) MMC1_DAT0 */ 299 AM64X_IOPAD(0x0284, PIN_INPUT_PULLUP, 0) /* (L21) MMC1_DAT1 */ 300 AM64X_IOPAD(0x0280, PIN_INPUT_PULLUP, 0) /* (K19) MMC1_DAT2 */ 301 AM64X_IOPAD(0x027c, PIN_INPUT_PULLUP, 0) /* (K18) MMC1_DAT3 */ 302 AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */ 303 AM64X_IOPAD(0x029c, PIN_INPUT, 0) /* (C20) MMC1_SDWP */ 304 AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */ 305 >; 306 }; 307 308 main_uart1_pins_default: main-uart1-default-pins { 309 pinctrl-single,pins = < 310 AM64X_IOPAD(0x0248, PIN_INPUT, 0) /* (D16) UART1_CTSn */ 311 AM64X_IOPAD(0x024c, PIN_OUTPUT, 0) /* (E16) UART1_RTSn */ 312 AM64X_IOPAD(0x0240, PIN_INPUT, 0) /* (E15) UART1_RXD */ 313 AM64X_IOPAD(0x0244, PIN_OUTPUT, 0) /* (E14) UART1_TXD */ 314 >; 315 }; 316 317 main_uart0_pins_default: main-uart0-default-pins { 318 bootph-all; 319 pinctrl-single,pins = < 320 AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */ 321 AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */ 322 AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */ 323 AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */ 324 >; 325 }; 326 327 main_spi0_pins_default: main-spi0-default-pins { 328 pinctrl-single,pins = < 329 AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */ 330 AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */ 331 AM64X_IOPAD(0x0214, PIN_OUTPUT, 0) /* (A13) SPI0_D0 */ 332 AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */ 333 >; 334 }; 335 336 main_i2c0_pins_default: main-i2c0-default-pins { 337 bootph-all; 338 pinctrl-single,pins = < 339 AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */ 340 AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */ 341 >; 342 }; 343 344 main_i2c1_pins_default: main-i2c1-default-pins { 345 bootph-all; 346 pinctrl-single,pins = < 347 AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ 348 AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */ 349 >; 350 }; 351 352 mdio1_pins_default: mdio1-default-pins { 353 bootph-all; 354 pinctrl-single,pins = < 355 AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */ 356 AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */ 357 >; 358 }; 359 360 rgmii1_pins_default: rgmii1-default-pins { 361 bootph-all; 362 pinctrl-single,pins = < 363 AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */ 364 AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */ 365 AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */ 366 AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */ 367 AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */ 368 AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */ 369 AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */ 370 AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */ 371 AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */ 372 AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */ 373 AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */ 374 AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */ 375 >; 376 }; 377 378 rgmii2_pins_default: rgmii2-default-pins { 379 bootph-all; 380 pinctrl-single,pins = < 381 AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */ 382 AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */ 383 AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */ 384 AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */ 385 AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */ 386 AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */ 387 AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */ 388 AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */ 389 AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */ 390 AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */ 391 AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */ 392 AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ 393 >; 394 }; 395 396 main_usb0_pins_default: main-usb0-default-pins { 397 bootph-all; 398 pinctrl-single,pins = < 399 AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ 400 >; 401 }; 402 403 ospi0_pins_default: ospi0-default-pins { 404 pinctrl-single,pins = < 405 AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ 406 AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ 407 AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ 408 AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ 409 AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ 410 AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ 411 AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ 412 AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ 413 AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ 414 AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ 415 AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ 416 >; 417 }; 418 419 main_ecap0_pins_default: main-ecap0-default-pins { 420 pinctrl-single,pins = < 421 AM64X_IOPAD(0x0270, PIN_INPUT, 0) /* (D18) ECAP0_IN_APWM_OUT */ 422 >; 423 }; 424 425 main_mcan0_pins_default: main-mcan0-default-pins { 426 pinctrl-single,pins = < 427 AM64X_IOPAD(0x0254, PIN_INPUT, 0) /* (B17) MCAN0_RX */ 428 AM64X_IOPAD(0x0250, PIN_OUTPUT, 0) /* (A17) MCAN0_TX */ 429 >; 430 }; 431 432 main_mcan1_pins_default: main-mcan1-default-pins { 433 pinctrl-single,pins = < 434 AM64X_IOPAD(0x025c, PIN_INPUT, 0) /* (D17) MCAN1_RX */ 435 AM64X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (C17) MCAN1_TX */ 436 >; 437 }; 438 439 ddr_vtt_pins_default: ddr-vtt-default-pins { 440 bootph-all; 441 pinctrl-single,pins = < 442 AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */ 443 >; 444 }; 445 446 icssg1_mdio1_pins_default: icssg1-mdio1-default-pins { 447 pinctrl-single,pins = < 448 AM64X_IOPAD(0x015c, PIN_OUTPUT, 0) /* (Y6) PRG1_MDIO0_MDC */ 449 AM64X_IOPAD(0x0158, PIN_INPUT, 0) /* (AA6) PRG1_MDIO0_MDIO */ 450 >; 451 }; 452 453 icssg1_rgmii1_pins_default: icssg1-rgmii1-default-pins{ 454 pinctrl-single,pins = < 455 AM64X_IOPAD(0x00b8, PIN_INPUT, 2) /* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */ 456 AM64X_IOPAD(0x00bc, PIN_INPUT, 2) /* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */ 457 AM64X_IOPAD(0x00c0, PIN_INPUT, 2) /* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */ 458 AM64X_IOPAD(0x00c4, PIN_INPUT, 2) /* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */ 459 AM64X_IOPAD(0x00d0, PIN_INPUT, 2) /* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */ 460 AM64X_IOPAD(0x00c8, PIN_INPUT, 2) /* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */ 461 AM64X_IOPAD(0x00e4, PIN_INPUT, 2) /* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */ 462 AM64X_IOPAD(0x00e8, PIN_INPUT, 2) /* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */ 463 AM64X_IOPAD(0x00ec, PIN_INPUT, 2) /* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */ 464 AM64X_IOPAD(0x00f0, PIN_INPUT, 2) /* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */ 465 AM64X_IOPAD(0x00f8, PIN_INPUT, 2) /* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */ 466 AM64X_IOPAD(0x00f4, PIN_INPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */ 467 >; 468 }; 469 470 icssg1_iep0_pins_default: icssg1-iep0-default-pins { 471 pinctrl-single,pins = < 472 AM64X_IOPAD(0x0104, PIN_OUTPUT, 2) /* (W7) PRG1_PRU0_GPO19.PRG1_IEP0_EDC_SYNC_OUT0 */ 473 >; 474 }; 475}; 476 477&main_uart0 { 478 bootph-all; 479 status = "okay"; 480 pinctrl-names = "default"; 481 pinctrl-0 = <&main_uart0_pins_default>; 482}; 483 484/* main_uart1 is reserved for firmware usage */ 485&main_uart1 { 486 status = "reserved"; 487 pinctrl-names = "default"; 488 pinctrl-0 = <&main_uart1_pins_default>; 489}; 490 491&main_i2c0 { 492 bootph-all; 493 status = "okay"; 494 pinctrl-names = "default"; 495 pinctrl-0 = <&main_i2c0_pins_default>; 496 clock-frequency = <400000>; 497 498 gpio@38 { 499 /* TCA9554 */ 500 compatible = "nxp,pca9554"; 501 reg = <0x38>; 502 gpio-controller; 503 #gpio-cells = <2>; 504 gpio-line-names = "HSE_DETECT"; 505 }; 506 507 eeprom@50 { 508 /* AT24CM01 */ 509 compatible = "atmel,24c1024"; 510 reg = <0x50>; 511 }; 512}; 513 514&main_i2c1 { 515 bootph-all; 516 status = "okay"; 517 pinctrl-names = "default"; 518 pinctrl-0 = <&main_i2c1_pins_default>; 519 clock-frequency = <400000>; 520 521 exp1: gpio@22 { 522 bootph-all; 523 compatible = "ti,tca6424"; 524 reg = <0x22>; 525 gpio-controller; 526 #gpio-cells = <2>; 527 gpio-line-names = "GPIO_eMMC_RSTn", "CAN_MUX_SEL", 528 "GPIO_CPSW1_RST", "GPIO_RGMII1_RST", 529 "GPIO_RGMII2_RST", "GPIO_PCIe_RST_OUT", 530 "MMC1_SD_EN", "FSI_FET_SEL", 531 "MCAN0_STB_3V3", "MCAN1_STB_3V3", 532 "CPSW_FET_SEL", "CPSW_FET2_SEL", 533 "PRG1_RGMII2_FET_SEL", "TEST_GPIO2", 534 "GPIO_OLED_RESETn", "VPP_LDO_EN", 535 "TEST_LED1", "TP92", "TP90", "TP88", 536 "TP87", "TP86", "TP89", "TP91"; 537 }; 538 539 /* osd9616p0899-10 */ 540 display@3c { 541 compatible = "solomon,ssd1306fb-i2c"; 542 reg = <0x3c>; 543 reset-gpios = <&exp1 14 GPIO_ACTIVE_LOW>; 544 vbat-supply = <&vddb>; 545 solomon,height = <16>; 546 solomon,width = <96>; 547 solomon,com-seq; 548 solomon,com-invdir; 549 solomon,page-offset = <0>; 550 solomon,prechargep1 = <2>; 551 solomon,prechargep2 = <13>; 552 }; 553}; 554 555&main_gpio0 { 556 bootph-all; 557}; 558 559/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ 560&mcu_gpio0 { 561 status = "reserved"; 562}; 563 564&mcu_gpio_intr { 565 status = "reserved"; 566}; 567 568&main_spi0 { 569 status = "okay"; 570 pinctrl-names = "default"; 571 pinctrl-0 = <&main_spi0_pins_default>; 572 ti,pindir-d0-out-d1-in; 573 eeprom@0 { 574 compatible = "microchip,93lc46b"; 575 reg = <0>; 576 spi-max-frequency = <1000000>; 577 spi-cs-high; 578 data-size = <16>; 579 }; 580}; 581 582/* eMMC */ 583&sdhci0 { 584 status = "okay"; 585 non-removable; 586 ti,driver-strength-ohm = <50>; 587 disable-wp; 588 bootph-all; 589}; 590 591/* SD/MMC */ 592&sdhci1 { 593 bootph-all; 594 status = "okay"; 595 vmmc-supply = <&vdd_mmc1>; 596 pinctrl-names = "default"; 597 pinctrl-0 = <&main_mmc1_pins_default>; 598 disable-wp; 599}; 600 601&usbss0 { 602 bootph-all; 603 ti,vbus-divider; 604 ti,usb2-only; 605}; 606 607&usb0 { 608 bootph-all; 609 dr_mode = "otg"; 610 maximum-speed = "high-speed"; 611 pinctrl-names = "default"; 612 pinctrl-0 = <&main_usb0_pins_default>; 613}; 614 615&cpsw3g { 616 bootph-all; 617 pinctrl-names = "default"; 618 pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>; 619 status = "okay"; 620}; 621 622&cpsw_port1 { 623 bootph-all; 624 phy-mode = "rgmii-rxid"; 625 phy-handle = <&cpsw3g_phy0>; 626 status = "okay"; 627}; 628 629&cpsw_port2 { 630 phy-mode = "rgmii-rxid"; 631 phy-handle = <&cpsw3g_phy3>; 632 status = "okay"; 633}; 634 635&cpsw3g_mdio { 636 bootph-all; 637 status = "okay"; 638 pinctrl-names = "default"; 639 pinctrl-0 = <&mdio1_pins_default>; 640 641 cpsw3g_phy0: ethernet-phy@0 { 642 bootph-all; 643 reg = <0>; 644 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; 645 ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; 646 }; 647}; 648 649&tscadc0 { 650 /* ADC is reserved for R5 usage */ 651 status = "reserved"; 652 653 adc { 654 ti,adc-channels = <0 1 2 3 4 5 6 7>; 655 }; 656}; 657 658&ospi0 { 659 status = "okay"; 660 pinctrl-names = "default"; 661 pinctrl-0 = <&ospi0_pins_default>; 662 663 flash@0 { 664 compatible = "jedec,spi-nor"; 665 reg = <0x0>; 666 spi-tx-bus-width = <8>; 667 spi-rx-bus-width = <8>; 668 spi-max-frequency = <25000000>; 669 cdns,tshsl-ns = <60>; 670 cdns,tsd2d-ns = <60>; 671 cdns,tchsh-ns = <60>; 672 cdns,tslch-ns = <60>; 673 cdns,read-delay = <4>; 674 675 partitions { 676 compatible = "fixed-partitions"; 677 #address-cells = <1>; 678 #size-cells = <1>; 679 680 partition@0 { 681 label = "ospi.tiboot3"; 682 reg = <0x0 0x100000>; 683 }; 684 685 partition@100000 { 686 label = "ospi.tispl"; 687 reg = <0x100000 0x200000>; 688 }; 689 690 partition@300000 { 691 label = "ospi.u-boot"; 692 reg = <0x300000 0x400000>; 693 }; 694 695 partition@700000 { 696 label = "ospi.env"; 697 reg = <0x700000 0x40000>; 698 }; 699 700 partition@740000 { 701 label = "ospi.env.backup"; 702 reg = <0x740000 0x40000>; 703 }; 704 705 partition@800000 { 706 label = "ospi.rootfs"; 707 reg = <0x800000 0x37c0000>; 708 }; 709 710 partition@3fc0000 { 711 label = "ospi.phypattern"; 712 reg = <0x3fc0000 0x40000>; 713 }; 714 }; 715 }; 716}; 717 718&mailbox0_cluster2 { 719 status = "okay"; 720 721 mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { 722 ti,mbox-rx = <0 0 2>; 723 ti,mbox-tx = <1 0 2>; 724 }; 725 726 mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { 727 ti,mbox-rx = <2 0 2>; 728 ti,mbox-tx = <3 0 2>; 729 }; 730}; 731 732&mailbox0_cluster4 { 733 status = "okay"; 734 735 mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { 736 ti,mbox-rx = <0 0 2>; 737 ti,mbox-tx = <1 0 2>; 738 }; 739 740 mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { 741 ti,mbox-rx = <2 0 2>; 742 ti,mbox-tx = <3 0 2>; 743 }; 744}; 745 746&mailbox0_cluster6 { 747 status = "okay"; 748 749 mbox_m4_0: mbox-m4-0 { 750 ti,mbox-rx = <0 0 2>; 751 ti,mbox-tx = <1 0 2>; 752 }; 753}; 754 755&main_r5fss0_core0 { 756 mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; 757 memory-region = <&main_r5fss0_core0_dma_memory_region>, 758 <&main_r5fss0_core0_memory_region>; 759}; 760 761&main_r5fss0_core1 { 762 mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; 763 memory-region = <&main_r5fss0_core1_dma_memory_region>, 764 <&main_r5fss0_core1_memory_region>; 765}; 766 767&main_r5fss1_core0 { 768 mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; 769 memory-region = <&main_r5fss1_core0_dma_memory_region>, 770 <&main_r5fss1_core0_memory_region>; 771}; 772 773&main_r5fss1_core1 { 774 mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; 775 memory-region = <&main_r5fss1_core1_dma_memory_region>, 776 <&main_r5fss1_core1_memory_region>; 777}; 778 779&serdes_ln_ctrl { 780 idle-states = <AM64_SERDES0_LANE0_PCIE0>; 781}; 782 783&serdes0 { 784 serdes0_pcie_link: phy@0 { 785 reg = <0>; 786 cdns,num-lanes = <1>; 787 #phy-cells = <0>; 788 cdns,phy-type = <PHY_TYPE_PCIE>; 789 resets = <&serdes_wiz0 1>; 790 }; 791}; 792 793&pcie0_rc { 794 status = "okay"; 795 reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>; 796 phys = <&serdes0_pcie_link>; 797 phy-names = "pcie-phy"; 798 num-lanes = <1>; 799}; 800 801&ecap0 { 802 status = "okay"; 803 /* PWM is available on Pin 1 of header J12 */ 804 pinctrl-names = "default"; 805 pinctrl-0 = <&main_ecap0_pins_default>; 806}; 807 808&main_mcan0 { 809 status = "okay"; 810 pinctrl-names = "default"; 811 pinctrl-0 = <&main_mcan0_pins_default>; 812 phys = <&transceiver1>; 813}; 814 815&main_mcan1 { 816 status = "okay"; 817 pinctrl-names = "default"; 818 pinctrl-0 = <&main_mcan1_pins_default>; 819 phys = <&transceiver2>; 820}; 821 822&icssg1_mdio { 823 status = "okay"; 824 pinctrl-names = "default"; 825 pinctrl-0 = <&icssg1_mdio1_pins_default>; 826 827 icssg1_phy1: ethernet-phy@f { 828 reg = <0xf>; 829 tx-internal-delay-ps = <250>; 830 rx-internal-delay-ps = <2000>; 831 }; 832}; 833 834&gpmc0 { 835 ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */ 836}; 837 838&icssg1_iep0 { 839 pinctrl-names = "default"; 840 pinctrl-0 = <&icssg1_iep0_pins_default>; 841}; 842