xref: /linux/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts (revision 3d0fe49454652117522f60bfbefb978ba0e5300b)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree file for the AM62P5-SK
4 * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
5 *
6 * Schematics: https://www.ti.com/lit/zip/sprr487
7 */
8
9/dts-v1/;
10
11#include <dt-bindings/leds/common.h>
12#include <dt-bindings/gpio/gpio.h>
13#include <dt-bindings/net/ti-dp83867.h>
14#include "k3-am62p5.dtsi"
15
16/ {
17	compatible = "ti,am62p5-sk", "ti,am62p5";
18	model = "Texas Instruments AM62P5 SK";
19
20	aliases {
21		serial0 = &wkup_uart0;
22		serial2 = &main_uart0;
23		serial3 = &main_uart1;
24		mmc0 = &sdhci0;
25		mmc1 = &sdhci1;
26		mmc2 = &sdhci2;
27		spi0 = &ospi0;
28		ethernet0 = &cpsw_port1;
29		ethernet1 = &cpsw_port2;
30	};
31
32	chosen {
33		stdout-path = &main_uart0;
34	};
35
36	memory@80000000 {
37		/* 8G RAM */
38		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
39		      <0x00000008 0x80000000 0x00000001 0x80000000>;
40		device_type = "memory";
41		bootph-pre-ram;
42	};
43
44	reserved-memory {
45		#address-cells = <2>;
46		#size-cells = <2>;
47		ranges;
48
49		secure_tfa_ddr: tfa@9e780000 {
50			reg = <0x00 0x9e780000 0x00 0x80000>;
51			no-map;
52		};
53
54		secure_ddr: optee@9e800000 {
55			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
56			no-map;
57		};
58
59		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
60			compatible = "shared-dma-pool";
61			reg = <0x00 0x9c900000 0x00 0x01e00000>;
62			no-map;
63		};
64	};
65
66	vmain_pd: regulator-0 {
67		/* TPS65988 PD CONTROLLER OUTPUT */
68		compatible = "regulator-fixed";
69		regulator-name = "vmain_pd";
70		regulator-min-microvolt = <5000000>;
71		regulator-max-microvolt = <5000000>;
72		regulator-always-on;
73		regulator-boot-on;
74		bootph-all;
75	};
76
77	vcc_5v0: regulator-1 {
78		/* Output of TPS630702RNMR */
79		compatible = "regulator-fixed";
80		regulator-name = "vcc_5v0";
81		regulator-min-microvolt = <5000000>;
82		regulator-max-microvolt = <5000000>;
83		vin-supply = <&vmain_pd>;
84		regulator-always-on;
85		regulator-boot-on;
86		bootph-all;
87	};
88
89	vdd_mmc1: regulator-2 {
90		/* TPS22918DBVR */
91		compatible = "regulator-fixed";
92		regulator-name = "vdd_mmc1";
93		regulator-min-microvolt = <3300000>;
94		regulator-max-microvolt = <3300000>;
95		regulator-boot-on;
96		enable-active-high;
97		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
98		bootph-all;
99	};
100
101	vddshv_sdio: regulator-3 {
102		compatible = "regulator-gpio";
103		regulator-name = "vddshv_sdio";
104		pinctrl-names = "default";
105		pinctrl-0 = <&vddshv_sdio_pins_default>;
106		regulator-min-microvolt = <1800000>;
107		regulator-max-microvolt = <3300000>;
108		regulator-boot-on;
109		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
110		states = <1800000 0x0>,
111			 <3300000 0x1>;
112		bootph-all;
113	};
114
115	leds {
116		compatible = "gpio-leds";
117		pinctrl-names = "default";
118		pinctrl-0 = <&usr_led_pins_default>;
119
120		led-0 {
121			label = "am62-sk:green:heartbeat";
122			gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
123			linux,default-trigger = "heartbeat";
124			function = LED_FUNCTION_HEARTBEAT;
125			default-state = "off";
126		};
127	};
128
129	tlv320_mclk: clk-0 {
130		#clock-cells = <0>;
131		compatible = "fixed-clock";
132		clock-frequency = <12288000>;
133	};
134
135	codec_audio: sound {
136		compatible = "simple-audio-card";
137		simple-audio-card,name = "AM62x-SKEVM";
138		simple-audio-card,widgets =
139			"Headphone",	"Headphone Jack",
140			"Line",		"Line In",
141			"Microphone",	"Microphone Jack";
142		simple-audio-card,routing =
143			"Headphone Jack",	"HPLOUT",
144			"Headphone Jack",	"HPROUT",
145			"LINE1L",		"Line In",
146			"LINE1R",		"Line In",
147			"MIC3R",		"Microphone Jack",
148			"Microphone Jack",	"Mic Bias";
149		simple-audio-card,format = "dsp_b";
150		simple-audio-card,bitclock-master = <&sound_master>;
151		simple-audio-card,frame-master = <&sound_master>;
152		simple-audio-card,bitclock-inversion;
153
154		simple-audio-card,cpu {
155			sound-dai = <&mcasp1>;
156		};
157
158		sound_master: simple-audio-card,codec {
159			sound-dai = <&tlv320aic3106>;
160			clocks = <&tlv320_mclk>;
161		};
162	};
163};
164
165&main_gpio0 {
166	bootph-all;
167};
168
169&main_gpio1 {
170	bootph-all;
171};
172
173&main_pmx0 {
174	bootph-all;
175
176	main_i2c0_pins_default: main-i2c0-default-pins {
177		pinctrl-single,pins = <
178			AM62PX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B25) I2C0_SCL */
179			AM62PX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A24) I2C0_SDA */
180		>;
181	};
182
183	main_i2c1_pins_default: main-i2c1-default-pins {
184		pinctrl-single,pins = <
185			AM62PX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */
186			AM62PX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B24) I2C1_SDA */
187		>;
188		bootph-all;
189	};
190
191	main_i2c2_pins_default: main-i2c2-default-pins {
192		pinctrl-single,pins = <
193			AM62PX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (T22) GPMC0_CSn2.I2C2_SCL */
194			AM62PX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (U25) GPMC0_CSn3.I2C2_SDA */
195		>;
196	};
197
198	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
199		pinctrl-single,pins = <
200			AM62PX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C22) UART0_RTSn.GPIO1_23 */
201		>;
202	};
203
204	main_mcasp1_pins_default: main-mcasp1-default-pins {
205		pinctrl-single,pins = <
206			AM62PX_IOPAD(0x0090, PIN_INPUT, 2) /* (U24) GPMC0_BE0n_CLE.MCASP1_ACLKX */
207			AM62PX_IOPAD(0x0098, PIN_INPUT, 2) /* (AA24) GPMC0_WAIT0.MCASP1_AFSX */
208			AM62PX_IOPAD(0x008c, PIN_INPUT, 2) /* (T25) GPMC0_WEn.MCASP1_AXR0 */
209			AM62PX_IOPAD(0x0084, PIN_INPUT, 2) /* (R25) GPMC0_ADVn_ALE.MCASP1_AXR2 */
210		>;
211	};
212
213	main_mdio1_pins_default: main-mdio1-default-pins {
214		pinctrl-single,pins = <
215			AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
216			AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
217		>;
218	};
219
220	main_mmc1_pins_default: main-mmc1-default-pins {
221		pinctrl-single,pins = <
222			AM62PX_IOPAD(0x023c, PIN_INPUT, 0) /* (H20) MMC1_CMD */
223			AM62PX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (J24) MMC1_CLK */
224			AM62PX_IOPAD(0x0230, PIN_INPUT, 0) /* (H21) MMC1_DAT0 */
225			AM62PX_IOPAD(0x022c, PIN_INPUT_PULLUP, 0) /* (H23) MMC1_DAT1 */
226			AM62PX_IOPAD(0x0228, PIN_INPUT_PULLUP, 0) /* (H22) MMC1_DAT2 */
227			AM62PX_IOPAD(0x0224, PIN_INPUT_PULLUP, 0) /* (H25) MMC1_DAT3 */
228			AM62PX_IOPAD(0x0240, PIN_INPUT, 0) /* (D23) MMC1_SDCD */
229		>;
230		bootph-all;
231	};
232
233	main_mmc2_pins_default: main-mmc2-default-pins {
234		pinctrl-single,pins = <
235			AM62PX_IOPAD(0x0120, PIN_INPUT, 0) /* (K24) MMC2_CMD */
236			AM62PX_IOPAD(0x0118, PIN_OUTPUT, 0) /* (K21) MMC2_CLK */
237			AM62PX_IOPAD(0x011C, PIN_INPUT, 0) /* () MMC2_CLKLB */
238			AM62PX_IOPAD(0x0114, PIN_INPUT, 0) /* (K23) MMC2_DAT0 */
239			AM62PX_IOPAD(0x0110, PIN_INPUT_PULLUP, 0) /* (K22) MMC2_DAT1 */
240			AM62PX_IOPAD(0x010c, PIN_INPUT_PULLUP, 0) /* (L20) MMC2_DAT2 */
241			AM62PX_IOPAD(0x0108, PIN_INPUT_PULLUP, 0) /* (L21) MMC2_DAT3 */
242		>;
243		bootph-all;
244	};
245
246	main_rgmii1_pins_default: main-rgmii1-default-pins {
247		pinctrl-single,pins = <
248			AM62PX_IOPAD(0x014c, PIN_INPUT, 0) /* (B15) RGMII1_RD0 */
249			AM62PX_IOPAD(0x0150, PIN_INPUT, 0) /* (B16) RGMII1_RD1 */
250			AM62PX_IOPAD(0x0154, PIN_INPUT, 0) /* (A14) RGMII1_RD2 */
251			AM62PX_IOPAD(0x0158, PIN_INPUT, 0) /* (B14) RGMII1_RD3 */
252			AM62PX_IOPAD(0x0148, PIN_INPUT, 0) /* (A16) RGMII1_RXC */
253			AM62PX_IOPAD(0x0144, PIN_INPUT, 0) /* (A15) RGMII1_RX_CTL */
254			AM62PX_IOPAD(0x0134, PIN_INPUT, 0) /* (A18) RGMII1_TD0 */
255			AM62PX_IOPAD(0x0138, PIN_INPUT, 0) /* (C17) RGMII1_TD1 */
256			AM62PX_IOPAD(0x013c, PIN_INPUT, 0) /* (A17) RGMII1_TD2 */
257			AM62PX_IOPAD(0x0140, PIN_INPUT, 0) /* (C16) RGMII1_TD3 */
258			AM62PX_IOPAD(0x0130, PIN_INPUT, 0) /* (B17) RGMII1_TXC */
259			AM62PX_IOPAD(0x012c, PIN_INPUT, 0) /* (B18) RGMII1_TX_CTL */
260		>;
261		bootph-all;
262	};
263
264	main_rgmii2_pins_default: main-rgmii2-default-pins {
265		pinctrl-single,pins = <
266			AM62PX_IOPAD(0x0184, PIN_INPUT, 0) /* (E19) RGMII2_RD0 */
267			AM62PX_IOPAD(0x0188, PIN_INPUT, 0) /* (E16) RGMII2_RD1 */
268			AM62PX_IOPAD(0x018c, PIN_INPUT, 0) /* (E17) RGMII2_RD2 */
269			AM62PX_IOPAD(0x0190, PIN_INPUT, 0) /* (C19) RGMII2_RD3 */
270			AM62PX_IOPAD(0x0180, PIN_INPUT, 0) /* (D19) RGMII2_RXC */
271			AM62PX_IOPAD(0x017c, PIN_INPUT, 0) /* (F19) RGMII2_RX_CTL */
272			AM62PX_IOPAD(0x016c, PIN_INPUT, 0) /* (B19) RGMII2_TD0 */
273			AM62PX_IOPAD(0x0170, PIN_INPUT, 0) /* (A21) RGMII2_TD1 */
274			AM62PX_IOPAD(0x0174, PIN_INPUT, 0) /* (D17) RGMII2_TD2 */
275			AM62PX_IOPAD(0x0178, PIN_INPUT, 0) /* (A19) RGMII2_TD3 */
276			AM62PX_IOPAD(0x0168, PIN_INPUT, 0) /* (D16) RGMII2_TXC */
277			AM62PX_IOPAD(0x0164, PIN_INPUT, 0) /* (A20) RGMII2_TX_CTL */
278		>;
279		bootph-all;
280	};
281
282	main_uart0_pins_default: main-uart0-default-pins {
283		pinctrl-single,pins = <
284			AM62PX_IOPAD(0x1c8, PIN_INPUT, 0)	/* (A22) UART0_RXD */
285			AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0)	/* (B22) UART0_TXD */
286		>;
287		bootph-all;
288	};
289
290	main_uart1_pins_default: main-uart1-default-pins {
291		pinctrl-single,pins = <
292			AM62PX_IOPAD(0x0194, PIN_INPUT, 2) /* (D25) MCASP0_AXR3.UART1_CTSn */
293			AM62PX_IOPAD(0x0198, PIN_OUTPUT, 2) /* (E25) MCASP0_AXR2.UART1_RTSn */
294			AM62PX_IOPAD(0x01ac, PIN_INPUT, 2) /* (G23) MCASP0_AFSR.UART1_RXD */
295			AM62PX_IOPAD(0x01b0, PIN_OUTPUT, 2) /* (G20) MCASP0_ACLKR.UART1_TXD */
296		>;
297		bootph-all;
298	};
299
300	main_wlirq_pins_default: main-wlirq-default-pins {
301		pinctrl-single,pins = <
302			AM62PX_IOPAD(0x0128, PIN_INPUT, 7) /* (K25) MMC2_SDWP.GPIO0_72 */
303		>;
304	};
305
306	ospi0_pins_default: ospi0-default-pins {
307		pinctrl-single,pins = <
308			AM62PX_IOPAD(0x0000, PIN_OUTPUT, 0) /* (P23) OSPI0_CLK */
309			AM62PX_IOPAD(0x002c, PIN_OUTPUT, 0) /* (M25) OSPI0_CSn0 */
310			AM62PX_IOPAD(0x000c, PIN_INPUT, 0) /* (L25) OSPI0_D0 */
311			AM62PX_IOPAD(0x0010, PIN_INPUT, 0) /* (N24) OSPI0_D1 */
312			AM62PX_IOPAD(0x0014, PIN_INPUT, 0) /* (N25) OSPI0_D2 */
313			AM62PX_IOPAD(0x0018, PIN_INPUT, 0) /* (M24) OSPI0_D3 */
314			AM62PX_IOPAD(0x001c, PIN_INPUT, 0) /* (N21) OSPI0_D4 */
315			AM62PX_IOPAD(0x0020, PIN_INPUT, 0) /* (N22) OSPI0_D5 */
316			AM62PX_IOPAD(0x0024, PIN_INPUT, 0) /* (P21) OSPI0_D6 */
317			AM62PX_IOPAD(0x0028, PIN_INPUT, 0) /* (N20) OSPI0_D7 */
318			AM62PX_IOPAD(0x0008, PIN_INPUT, 0) /* (P22) OSPI0_DQS */
319		>;
320		bootph-all;
321	};
322
323	usr_led_pins_default: usr-led-default-pins {
324		pinctrl-single,pins = <
325			AM62PX_IOPAD(0x0244, PIN_INPUT, 7) /* (D24) MMC1_SDWP.GPIO1_49 */
326		>;
327	};
328
329	vddshv_sdio_pins_default: vddshvr-sdio-default-pins {
330		pinctrl-single,pins = <
331			AM62PX_IOPAD(0x007c, PIN_INPUT, 7) /* (Y25) GPMC0_CLK.GPIO0_31 */
332		>;
333		bootph-all;
334	};
335
336	wlan_en_pins_default: wlan-en-default-pins {
337		pinctrl-single,pins = <
338			AM62PX_IOPAD(0x0124, PIN_INPUT, 7) /* (J25) MMC2_SDCD.GPIO0_71 */
339		>;
340	};
341};
342
343&main_i2c1 {
344	status = "okay";
345	pinctrl-names = "default";
346	pinctrl-0 = <&main_i2c1_pins_default>;
347	clock-frequency = <100000>;
348	bootph-all;
349
350	tlv320aic3106: audio-codec@1b {
351		#sound-dai-cells = <0>;
352		compatible = "ti,tlv320aic3106";
353		reg = <0x1b>;
354		ai3x-micbias-vg = <1>;  /* 2.0V */
355	};
356
357	exp1: gpio@22 {
358		compatible = "ti,tca6424";
359		reg = <0x22>;
360		gpio-controller;
361		#gpio-cells = <2>;
362		gpio-line-names = "OLDI_INT#", "x8_NAND_DETECT",
363				   "UART1_FET_SEL", "MMC1_SD_EN",
364				   "VPP_EN", "EXP_PS_3V3_EN",
365				   "UART1_FET_BUF_EN", "EXP_HAT_DETECT",
366				   "DSI_GPIO0", "DSI_GPIO1",
367				   "OLDI_EDID", "BT_UART_WAKE_SOC_3V3",
368				   "USB_TYPEA_OC_INDICATION", "CSI_GPIO0",
369				   "CSI_GPIO1", "WLAN_ALERTn",
370				   "HDMI_INTn", "TEST_GPIO2",
371				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
372				   "MCASP1_FET_SEL", "DSI_EDID",
373				   "PD_I2C_IRQ", "IO_EXP_TEST_LED";
374
375		interrupt-parent = <&main_gpio1>;
376		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
377		interrupt-controller;
378		#interrupt-cells = <2>;
379
380		pinctrl-names = "default";
381		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
382		bootph-all;
383	};
384
385	exp2: gpio@23 {
386		compatible = "ti,tca6424";
387		reg = <0x23>;
388		gpio-controller;
389		#gpio-cells = <2>;
390		gpio-line-names = "BT_EN_SOC", "EXP_PS_5V0_EN",
391				   "", "",
392				   "", "",
393				   "", "",
394				   "WL_LT_EN", "",
395				   "TP3", "TP6",
396				   "TP4", "TP7",
397				   "TP5", "TP8",
398				   "SoC_I2C2_MCAN_SEL", "GPIO_HDMI_RSTn",
399				   "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
400				   "GPIO_OLDI_RSTn", "GPIO_AUD_RSTn",
401				   "GPIO_eMMC_RSTn", "SoC_WLAN_SDIO_RST";
402	};
403};
404
405&main_i2c2 {
406	status = "okay";
407	pinctrl-names = "default";
408	pinctrl-0 = <&main_i2c2_pins_default>;
409	clock-frequency = <400000>;
410};
411
412&sdhci0 {
413	status = "okay";
414	ti,driver-strength-ohm = <50>;
415	disable-wp;
416};
417
418&sdhci1 {
419	/* SD/MMC */
420	status = "okay";
421	vmmc-supply = <&vdd_mmc1>;
422	vqmmc-supply = <&vddshv_sdio>;
423	pinctrl-names = "default";
424	pinctrl-0 = <&main_mmc1_pins_default>;
425	ti,driver-strength-ohm = <50>;
426	disable-wp;
427	no-1-8-v;
428	bootph-all;
429};
430
431&cpsw3g {
432	pinctrl-names = "default";
433	pinctrl-0 = <&main_rgmii1_pins_default>,
434		    <&main_rgmii2_pins_default>;
435};
436
437&cpsw_port1 {
438	phy-mode = "rgmii-rxid";
439	phy-handle = <&cpsw3g_phy0>;
440};
441
442&cpsw_port2 {
443	phy-mode = "rgmii-rxid";
444	phy-handle = <&cpsw3g_phy1>;
445};
446
447&cpsw3g_mdio {
448	cpsw3g_phy0: ethernet-phy@0 {
449		reg = <0>;
450		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
451		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
452		ti,min-output-impedance;
453	};
454
455	cpsw3g_phy1: ethernet-phy@1 {
456		reg = <1>;
457		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
458		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
459		ti,min-output-impedance;
460	};
461};
462
463&mcasp1 {
464	status = "okay";
465	#sound-dai-cells = <0>;
466
467	pinctrl-names = "default";
468	pinctrl-0 = <&main_mcasp1_pins_default>;
469
470	op-mode = <0>;          /* MCASP_IIS_MODE */
471	tdm-slots = <2>;
472
473	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
474	       1 0 2 0
475	       0 0 0 0
476	       0 0 0 0
477	       0 0 0 0
478	>;
479	tx-num-evt = <32>;
480	rx-num-evt = <32>;
481};
482
483&fss {
484	bootph-all;
485};
486
487&ospi0 {
488	status = "okay";
489	pinctrl-names = "default";
490	pinctrl-0 = <&ospi0_pins_default>;
491	bootph-all;
492
493	flash@0{
494		compatible = "jedec,spi-nor";
495		reg = <0x0>;
496		spi-tx-bus-width = <8>;
497		spi-rx-bus-width = <8>;
498		spi-max-frequency = <25000000>;
499		cdns,tshsl-ns = <60>;
500		cdns,tsd2d-ns = <60>;
501		cdns,tchsh-ns = <60>;
502		cdns,tslch-ns = <60>;
503		cdns,read-delay = <4>;
504		bootph-all;
505
506		partitions {
507			compatible = "fixed-partitions";
508			#address-cells = <1>;
509			#size-cells = <1>;
510			bootph-all;
511
512			partition@0 {
513				label = "ospi.tiboot3";
514				reg = <0x00 0x80000>;
515			};
516
517			partition@80000 {
518				label = "ospi.tispl";
519				reg = <0x80000 0x200000>;
520			};
521
522			partition@280000 {
523				label = "ospi.u-boot";
524				reg = <0x280000 0x400000>;
525			};
526
527			partition@680000 {
528				label = "ospi.env";
529				reg = <0x680000 0x40000>;
530			};
531
532			partition@6c0000 {
533				label = "ospi.env.backup";
534				reg = <0x6c0000 0x40000>;
535			};
536
537			partition@800000 {
538				label = "ospi.rootfs";
539				reg = <0x800000 0x37c0000>;
540			};
541
542			partition@3fc0000 {
543				label = "ospi.phypattern";
544				reg = <0x3fc0000 0x40000>;
545				bootph-all;
546			};
547		};
548	};
549};
550
551&mailbox0_cluster0 {
552	mbox_r5_0: mbox-r5-0 {
553		ti,mbox-rx = <0 0 0>;
554		ti,mbox-tx = <1 0 0>;
555	};
556};
557
558&mailbox0_cluster1 {
559	mbox_mcu_r5_0: mbox-mcu-r5-0 {
560		ti,mbox-rx = <0 0 0>;
561		ti,mbox-tx = <1 0 0>;
562	};
563};
564
565&main_uart0 {
566	pinctrl-names = "default";
567	pinctrl-0 = <&main_uart0_pins_default>;
568	status = "okay";
569	bootph-all;
570};
571
572&main_uart1 {
573	pinctrl-names = "default";
574	pinctrl-0 = <&main_uart1_pins_default>;
575	/* Main UART1 is used by TIFS firmware */
576	status = "reserved";
577	bootph-all;
578};
579
580&mcu_pmx0 {
581	bootph-all;
582
583	wkup_uart0_pins_default: wkup-uart0-default-pins {
584		pinctrl-single,pins = <
585			AM62PX_MCU_IOPAD(0x02c, PIN_INPUT, 0)	/* (C7) WKUP_UART0_CTSn */
586			AM62PX_MCU_IOPAD(0x030, PIN_OUTPUT, 0)	/* (C6) WKUP_UART0_RTSn */
587			AM62PX_MCU_IOPAD(0x024, PIN_INPUT, 0)	/* (D8) WKUP_UART0_RXD */
588			AM62PX_MCU_IOPAD(0x028, PIN_OUTPUT, 0)	/* (D7) WKUP_UART0_TXD */
589		>;
590		bootph-all;
591	};
592};
593
594&wkup_uart0 {
595	/* WKUP UART0 is used by DM firmware */
596	pinctrl-names = "default";
597	pinctrl-0 = <&wkup_uart0_pins_default>;
598	status = "reserved";
599	bootph-all;
600};
601