xref: /linux/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi (revision 90d32e92011eaae8e70a9169b4e7acf4ca8f9d3a)
1// SPDX-License-Identifier: GPL-2.0-only OR MIT
2/*
3 * Device Tree Source for AM625 SoC Family Wakeup Domain peripherals
4 *
5 * Copyright (C) 2020-2024 Texas Instruments Incorporated - https://www.ti.com/
6 */
7
8#include <dt-bindings/bus/ti-sysc.h>
9
10&cbass_wakeup {
11	wkup_conf: syscon@43000000 {
12		bootph-all;
13		compatible = "syscon", "simple-mfd";
14		reg = <0x00 0x43000000 0x00 0x20000>;
15		#address-cells = <1>;
16		#size-cells = <1>;
17		ranges = <0x0 0x00 0x43000000 0x20000>;
18
19		chipid: chipid@14 {
20			bootph-all;
21			compatible = "ti,am654-chipid";
22			reg = <0x14 0x4>;
23		};
24
25		usb0_phy_ctrl: syscon@4008 {
26			compatible = "ti,am62-usb-phy-ctrl", "syscon";
27			reg = <0x4008 0x4>;
28		};
29
30		usb1_phy_ctrl: syscon@4018 {
31			compatible = "ti,am62-usb-phy-ctrl", "syscon";
32			reg = <0x4018 0x4>;
33		};
34	};
35
36	target-module@2b300050 {
37		compatible = "ti,sysc-omap2", "ti,sysc";
38		reg = <0x00 0x2b300050 0x00 0x4>,
39		      <0x00 0x2b300054 0x00 0x4>,
40		      <0x00 0x2b300058 0x00 0x4>;
41		reg-names = "rev", "sysc", "syss";
42		ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
43				 SYSC_OMAP2_SOFTRESET |
44				 SYSC_OMAP2_AUTOIDLE)>;
45		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
46				<SYSC_IDLE_NO>,
47				<SYSC_IDLE_SMART>,
48				<SYSC_IDLE_SMART_WKUP>;
49		ti,syss-mask = <1>;
50		ti,no-reset-on-init;
51		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
52		clocks = <&k3_clks 114 0>;
53		clock-names = "fck";
54		#address-cells = <1>;
55		#size-cells = <1>;
56		ranges = <0x0 0x00 0x2b300000 0x100000>;
57
58		wkup_uart0: serial@0 {
59			compatible = "ti,am64-uart", "ti,am654-uart";
60			reg = <0x0 0x100>;
61			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
62			status = "disabled";
63		};
64	};
65
66	wkup_i2c0: i2c@2b200000 {
67		compatible = "ti,am64-i2c", "ti,omap4-i2c";
68		reg = <0x00 0x2b200000 0x00 0x100>;
69		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
70		#address-cells = <1>;
71		#size-cells = <0>;
72		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
73		clocks = <&k3_clks 107 4>;
74		clock-names = "fck";
75		status = "disabled";
76	};
77
78	wkup_rtc0: rtc@2b1f0000 {
79		compatible = "ti,am62-rtc";
80		reg = <0x00 0x2b1f0000 0x00 0x100>;
81		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
82		clocks = <&k3_clks 117 6> , <&k3_clks 117 0>;
83		clock-names = "vbus", "osc32k";
84		power-domains = <&k3_pds 117 TI_SCI_PD_EXCLUSIVE>;
85		wakeup-source;
86	};
87
88	wkup_rti0: watchdog@2b000000 {
89		compatible = "ti,j7-rti-wdt";
90		reg = <0x00 0x2b000000 0x00 0x100>;
91		clocks = <&k3_clks 132 0>;
92		power-domains = <&k3_pds 132 TI_SCI_PD_EXCLUSIVE>;
93		assigned-clocks = <&k3_clks 132 0>;
94		assigned-clock-parents = <&k3_clks 132 2>;
95		/* Used by DM firmware */
96		status = "reserved";
97	};
98
99	wkup_vtm0: temperature-sensor@b00000 {
100		compatible = "ti,j7200-vtm";
101		reg = <0x00 0xb00000 0x00 0x400>,
102		      <0x00 0xb01000 0x00 0x400>;
103		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
104		#thermal-sensor-cells = <1>;
105	};
106};
107