xref: /linux/arch/arm64/boot/dts/ti/k3-am62-lp-sk-nand.dtso (revision ed7171ff9fabc49ae6ed42fbd082a576473836fc)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2022-2024 Texas Instruments Incorporated - https://www.ti.com/
4 */
5
6/dts-v1/;
7/plugin/;
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/interrupt-controller/irq.h>
10#include "k3-pinctrl.h"
11
12&mcasp1 {
13	status = "disabled";
14};
15
16&main_pmx0 {
17	gpmc0_pins_default: gpmc0-pins-default {
18		pinctrl-single,pins = <
19			AM62X_IOPAD(0x003c, PIN_INPUT, 0) /* (K19) GPMC0_AD0 */
20			AM62X_IOPAD(0x0040, PIN_INPUT, 0) /* (L19) GPMC0_AD1 */
21			AM62X_IOPAD(0x0044, PIN_INPUT, 0) /* (L20) GPMC0_AD2 */
22			AM62X_IOPAD(0x0048, PIN_INPUT, 0) /* (L21) GPMC0_AD3 */
23			AM62X_IOPAD(0x004c, PIN_INPUT, 0) /* (M21) GPMC0_AD4 */
24			AM62X_IOPAD(0x0050, PIN_INPUT, 0) /* (L17) GPMC0_AD5 */
25			AM62X_IOPAD(0x0054, PIN_INPUT, 0) /* (L18) GPMC0_AD6 */
26			AM62X_IOPAD(0x0058, PIN_INPUT, 0) /* (M20) GPMC0_AD7 */
27			AM62X_IOPAD(0x0098, PIN_INPUT, 0) /* (P21) GPMC0_WAIT0 */
28			AM62X_IOPAD(0x00a8, PIN_OUTPUT, 0) /* (J18) GPMC0_CSn0 */
29			AM62X_IOPAD(0x0084, PIN_OUTPUT, 0) /* (K20) GPMC0_ADVn_ALE */
30			AM62X_IOPAD(0x0088, PIN_OUTPUT, 0) /* (K21) GPMC0_OEn_REn */
31			AM62X_IOPAD(0x008c, PIN_OUTPUT, 0) /* (J17) GPMC0_WEn */
32			AM62X_IOPAD(0x0090, PIN_OUTPUT, 0) /* (K17) GPMC0_BE0n_CLE */
33			AM62X_IOPAD(0x00a0, PIN_OUTPUT, 0) /* (J20) GPMC0_WPn */
34		>;
35	};
36};
37
38&elm0 {
39	status = "okay";
40};
41
42&gpmc0 {
43	status = "okay";
44	pinctrl-names = "default";
45	pinctrl-0 = <&gpmc0_pins_default>;
46	#address-cells = <2>;
47	#size-cells = <1>;
48
49	nand@0,0 {
50		compatible = "ti,am64-nand";
51		reg = <0 0 64>;		/* device IO registers */
52		interrupt-parent = <&gpmc0>;
53		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
54			     <1 IRQ_TYPE_NONE>;	/* termcount */
55		rb-gpios = <&gpmc0 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
56		ti,nand-xfer-type = "prefetch-polled";
57		ti,nand-ecc-opt = "bch8";	/* BCH8: Bootrom limitation */
58		ti,elm-id = <&elm0>;
59		nand-bus-width = <8>;
60		gpmc,device-width = <1>;
61		gpmc,sync-clk-ps = <0>;
62		gpmc,cs-on-ns = <0>;
63		gpmc,cs-rd-off-ns = <40>;
64		gpmc,cs-wr-off-ns = <40>;
65		gpmc,adv-on-ns = <0>;
66		gpmc,adv-rd-off-ns = <25>;
67		gpmc,adv-wr-off-ns = <25>;
68		gpmc,we-on-ns = <0>;
69		gpmc,we-off-ns = <20>;
70		gpmc,oe-on-ns = <3>;
71		gpmc,oe-off-ns = <30>;
72		gpmc,access-ns = <30>;
73		gpmc,rd-cycle-ns = <40>;
74		gpmc,wr-cycle-ns = <40>;
75		gpmc,bus-turnaround-ns = <0>;
76		gpmc,cycle2cycle-delay-ns = <0>;
77		gpmc,clk-activation-ns = <0>;
78		gpmc,wr-access-ns = <40>;
79		gpmc,wr-data-mux-bus-ns = <0>;
80
81		partitions {
82			compatible = "fixed-partitions";
83			#address-cells = <1>;
84			#size-cells = <1>;
85
86			partition@0 {
87				label = "NAND.tiboot3";
88				reg = <0x00000000 0x00200000>;	/* 2M */
89			};
90			partition@200000 {
91				label = "NAND.tispl";
92				reg = <0x00200000 0x00200000>;	/* 2M */
93			};
94			partition@400000 {
95				label = "NAND.tiboot3.backup";	/* 2M */
96				reg = <0x00400000 0x00200000>;	/* BootROM looks at 4M */
97			};
98			partition@600000 {
99				label = "NAND.u-boot";
100				reg = <0x00600000 0x00400000>;	/* 4M */
101			};
102			partition@a00000 {
103				label = "NAND.u-boot-env";
104				reg = <0x00a00000 0x00040000>;	/* 256K */
105			};
106			partition@a40000 {
107				label = "NAND.u-boot-env.backup";
108				reg = <0x00a40000 0x00040000>;	/* 256K */
109			};
110			partition@a80000 {
111				label = "NAND.file-system";
112				reg = <0x00a80000 0x3f580000>;
113			};
114		};
115	};
116};
117