xref: /linux/arch/arm64/boot/dts/rockchip/rk3588.dtsi (revision 34dc1baba215b826e454b8d19e4f24adbeb7d00d)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
4 */
5
6#include "rk3588s.dtsi"
7#include "rk3588-pinctrl.dtsi"
8
9/ {
10	pcie30_phy_grf: syscon@fd5b8000 {
11		compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
12		reg = <0x0 0xfd5b8000 0x0 0x10000>;
13	};
14
15	pipe_phy1_grf: syscon@fd5c0000 {
16		compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
17		reg = <0x0 0xfd5c0000 0x0 0x100>;
18	};
19
20	i2s8_8ch: i2s@fddc8000 {
21		compatible = "rockchip,rk3588-i2s-tdm";
22		reg = <0x0 0xfddc8000 0x0 0x1000>;
23		interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>;
24		clocks = <&cru MCLK_I2S8_8CH_TX>, <&cru MCLK_I2S8_8CH_TX>, <&cru HCLK_I2S8_8CH>;
25		clock-names = "mclk_tx", "mclk_rx", "hclk";
26		assigned-clocks = <&cru CLK_I2S8_8CH_TX_SRC>;
27		assigned-clock-parents = <&cru PLL_AUPLL>;
28		dmas = <&dmac2 22>;
29		dma-names = "tx";
30		power-domains = <&power RK3588_PD_VO0>;
31		resets = <&cru SRST_M_I2S8_8CH_TX>;
32		reset-names = "tx-m";
33		#sound-dai-cells = <0>;
34		status = "disabled";
35	};
36
37	i2s6_8ch: i2s@fddf4000 {
38		compatible = "rockchip,rk3588-i2s-tdm";
39		reg = <0x0 0xfddf4000 0x0 0x1000>;
40		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
41		clocks = <&cru MCLK_I2S6_8CH_TX>, <&cru MCLK_I2S6_8CH_TX>, <&cru HCLK_I2S6_8CH>;
42		clock-names = "mclk_tx", "mclk_rx", "hclk";
43		assigned-clocks = <&cru CLK_I2S6_8CH_TX_SRC>;
44		assigned-clock-parents = <&cru PLL_AUPLL>;
45		dmas = <&dmac2 4>;
46		dma-names = "tx";
47		power-domains = <&power RK3588_PD_VO1>;
48		resets = <&cru SRST_M_I2S6_8CH_TX>;
49		reset-names = "tx-m";
50		#sound-dai-cells = <0>;
51		status = "disabled";
52	};
53
54	i2s7_8ch: i2s@fddf8000 {
55		compatible = "rockchip,rk3588-i2s-tdm";
56		reg = <0x0 0xfddf8000 0x0 0x1000>;
57		interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>;
58		clocks = <&cru MCLK_I2S7_8CH_RX>, <&cru MCLK_I2S7_8CH_RX>, <&cru HCLK_I2S7_8CH>;
59		clock-names = "mclk_tx", "mclk_rx", "hclk";
60		assigned-clocks = <&cru CLK_I2S7_8CH_RX_SRC>;
61		assigned-clock-parents = <&cru PLL_AUPLL>;
62		dmas = <&dmac2 21>;
63		dma-names = "rx";
64		power-domains = <&power RK3588_PD_VO1>;
65		resets = <&cru SRST_M_I2S7_8CH_RX>;
66		reset-names = "rx-m";
67		#sound-dai-cells = <0>;
68		status = "disabled";
69	};
70
71	i2s10_8ch: i2s@fde00000 {
72		compatible = "rockchip,rk3588-i2s-tdm";
73		reg = <0x0 0xfde00000 0x0 0x1000>;
74		interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>;
75		clocks = <&cru MCLK_I2S10_8CH_RX>, <&cru MCLK_I2S10_8CH_RX>, <&cru HCLK_I2S10_8CH>;
76		clock-names = "mclk_tx", "mclk_rx", "hclk";
77		assigned-clocks = <&cru CLK_I2S10_8CH_RX_SRC>;
78		assigned-clock-parents = <&cru PLL_AUPLL>;
79		dmas = <&dmac2 24>;
80		dma-names = "rx";
81		power-domains = <&power RK3588_PD_VO1>;
82		resets = <&cru SRST_M_I2S10_8CH_RX>;
83		reset-names = "rx-m";
84		#sound-dai-cells = <0>;
85		status = "disabled";
86	};
87
88	pcie3x4: pcie@fe150000 {
89		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
90		#address-cells = <3>;
91		#size-cells = <2>;
92		bus-range = <0x00 0x0f>;
93		clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
94			 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
95			 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
96		clock-names = "aclk_mst", "aclk_slv",
97			      "aclk_dbi", "pclk",
98			      "aux", "pipe";
99		device_type = "pci";
100		interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
101			     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
102			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
103			     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
104			     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
105		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
106		#interrupt-cells = <1>;
107		interrupt-map-mask = <0 0 0 7>;
108		interrupt-map = <0 0 0 1 &pcie3x4_intc 0>,
109				<0 0 0 2 &pcie3x4_intc 1>,
110				<0 0 0 3 &pcie3x4_intc 2>,
111				<0 0 0 4 &pcie3x4_intc 3>;
112		linux,pci-domain = <0>;
113		max-link-speed = <3>;
114		msi-map = <0x0000 &its1 0x0000 0x1000>;
115		num-lanes = <4>;
116		phys = <&pcie30phy>;
117		phy-names = "pcie-phy";
118		power-domains = <&power RK3588_PD_PCIE>;
119		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
120			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>,
121			 <0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>;
122		reg = <0xa 0x40000000 0x0 0x00400000>,
123		      <0x0 0xfe150000 0x0 0x00010000>,
124		      <0x0 0xf0000000 0x0 0x00100000>;
125		reg-names = "dbi", "apb", "config";
126		resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
127		reset-names = "pwr", "pipe";
128		status = "disabled";
129
130		pcie3x4_intc: legacy-interrupt-controller {
131			interrupt-controller;
132			#address-cells = <0>;
133			#interrupt-cells = <1>;
134			interrupt-parent = <&gic>;
135			interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>;
136		};
137	};
138
139	pcie3x2: pcie@fe160000 {
140		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
141		#address-cells = <3>;
142		#size-cells = <2>;
143		bus-range = <0x10 0x1f>;
144		clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
145			 <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
146			 <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>;
147		clock-names = "aclk_mst", "aclk_slv",
148			      "aclk_dbi", "pclk",
149			      "aux", "pipe";
150		device_type = "pci";
151		interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>,
152			     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>,
153			     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>,
154			     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
155			     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
156		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
157		#interrupt-cells = <1>;
158		interrupt-map-mask = <0 0 0 7>;
159		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
160				<0 0 0 2 &pcie3x2_intc 1>,
161				<0 0 0 3 &pcie3x2_intc 2>,
162				<0 0 0 4 &pcie3x2_intc 3>;
163		linux,pci-domain = <1>;
164		max-link-speed = <3>;
165		msi-map = <0x1000 &its1 0x1000 0x1000>;
166		num-lanes = <2>;
167		phys = <&pcie30phy>;
168		phy-names = "pcie-phy";
169		power-domains = <&power RK3588_PD_PCIE>;
170		ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>,
171			 <0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>,
172			 <0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>;
173		reg = <0xa 0x40400000 0x0 0x00400000>,
174		      <0x0 0xfe160000 0x0 0x00010000>,
175		      <0x0 0xf1000000 0x0 0x00100000>;
176		reg-names = "dbi", "apb", "config";
177		resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
178		reset-names = "pwr", "pipe";
179		status = "disabled";
180
181		pcie3x2_intc: legacy-interrupt-controller {
182			interrupt-controller;
183			#address-cells = <0>;
184			#interrupt-cells = <1>;
185			interrupt-parent = <&gic>;
186			interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>;
187		};
188	};
189
190	pcie2x1l0: pcie@fe170000 {
191		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
192		bus-range = <0x20 0x2f>;
193		clocks = <&cru ACLK_PCIE_1L0_MSTR>, <&cru ACLK_PCIE_1L0_SLV>,
194			 <&cru ACLK_PCIE_1L0_DBI>, <&cru PCLK_PCIE_1L0>,
195			 <&cru CLK_PCIE_AUX2>, <&cru CLK_PCIE1L0_PIPE>;
196		clock-names = "aclk_mst", "aclk_slv",
197			      "aclk_dbi", "pclk",
198			      "aux", "pipe";
199		device_type = "pci";
200		interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>,
201			     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH 0>,
202			     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH 0>,
203			     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH 0>,
204			     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
205		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
206		#interrupt-cells = <1>;
207		interrupt-map-mask = <0 0 0 7>;
208		interrupt-map = <0 0 0 1 &pcie2x1l0_intc 0>,
209				<0 0 0 2 &pcie2x1l0_intc 1>,
210				<0 0 0 3 &pcie2x1l0_intc 2>,
211				<0 0 0 4 &pcie2x1l0_intc 3>;
212		linux,pci-domain = <2>;
213		max-link-speed = <2>;
214		msi-map = <0x2000 &its0 0x2000 0x1000>;
215		num-lanes = <1>;
216		phys = <&combphy1_ps PHY_TYPE_PCIE>;
217		phy-names = "pcie-phy";
218		power-domains = <&power RK3588_PD_PCIE>;
219		ranges = <0x01000000 0x0 0xf2100000 0x0 0xf2100000 0x0 0x00100000>,
220			 <0x02000000 0x0 0xf2200000 0x0 0xf2200000 0x0 0x00e00000>,
221			 <0x03000000 0x0 0x40000000 0x9 0x80000000 0x0 0x40000000>;
222		reg = <0xa 0x40800000 0x0 0x00400000>,
223		      <0x0 0xfe170000 0x0 0x00010000>,
224		      <0x0 0xf2000000 0x0 0x00100000>;
225		reg-names = "dbi", "apb", "config";
226		resets = <&cru SRST_PCIE2_POWER_UP>, <&cru SRST_P_PCIE2>;
227		reset-names = "pwr", "pipe";
228		#address-cells = <3>;
229		#size-cells = <2>;
230		status = "disabled";
231
232		pcie2x1l0_intc: legacy-interrupt-controller {
233			interrupt-controller;
234			#address-cells = <0>;
235			#interrupt-cells = <1>;
236			interrupt-parent = <&gic>;
237			interrupts = <GIC_SPI 240 IRQ_TYPE_EDGE_RISING 0>;
238		};
239	};
240
241	gmac0: ethernet@fe1b0000 {
242		compatible = "rockchip,rk3588-gmac", "snps,dwmac-4.20a";
243		reg = <0x0 0xfe1b0000 0x0 0x10000>;
244		interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH 0>,
245			     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
246		interrupt-names = "macirq", "eth_wake_irq";
247		clocks = <&cru CLK_GMAC_125M>, <&cru CLK_GMAC_50M>,
248			 <&cru PCLK_GMAC0>, <&cru ACLK_GMAC0>,
249			 <&cru CLK_GMAC0_PTP_REF>;
250		clock-names = "stmmaceth", "clk_mac_ref",
251			      "pclk_mac", "aclk_mac",
252			      "ptp_ref";
253		power-domains = <&power RK3588_PD_GMAC>;
254		resets = <&cru SRST_A_GMAC0>;
255		reset-names = "stmmaceth";
256		rockchip,grf = <&sys_grf>;
257		rockchip,php-grf = <&php_grf>;
258		snps,axi-config = <&gmac0_stmmac_axi_setup>;
259		snps,mixed-burst;
260		snps,mtl-rx-config = <&gmac0_mtl_rx_setup>;
261		snps,mtl-tx-config = <&gmac0_mtl_tx_setup>;
262		snps,tso;
263		status = "disabled";
264
265		mdio0: mdio {
266			compatible = "snps,dwmac-mdio";
267			#address-cells = <0x1>;
268			#size-cells = <0x0>;
269		};
270
271		gmac0_stmmac_axi_setup: stmmac-axi-config {
272			snps,blen = <0 0 0 0 16 8 4>;
273			snps,wr_osr_lmt = <4>;
274			snps,rd_osr_lmt = <8>;
275		};
276
277		gmac0_mtl_rx_setup: rx-queues-config {
278			snps,rx-queues-to-use = <2>;
279			queue0 {};
280			queue1 {};
281		};
282
283		gmac0_mtl_tx_setup: tx-queues-config {
284			snps,tx-queues-to-use = <2>;
285			queue0 {};
286			queue1 {};
287		};
288	};
289
290	sata1: sata@fe220000 {
291		compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
292		reg = <0 0xfe220000 0 0x1000>;
293		interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
294		clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
295			 <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>,
296			 <&cru CLK_PIPEPHY1_PIPE_ASIC_G>;
297		clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
298		ports-implemented = <0x1>;
299		#address-cells = <1>;
300		#size-cells = <0>;
301		status = "disabled";
302
303		sata-port@0 {
304			reg = <0>;
305			hba-port-cap = <HBA_PORT_FBSCP>;
306			phys = <&combphy1_ps PHY_TYPE_SATA>;
307			phy-names = "sata-phy";
308			snps,rx-ts-max = <32>;
309			snps,tx-ts-max = <32>;
310		};
311	};
312
313	combphy1_ps: phy@fee10000 {
314		compatible = "rockchip,rk3588-naneng-combphy";
315		reg = <0x0 0xfee10000 0x0 0x100>;
316		clocks = <&cru CLK_REF_PIPE_PHY1>, <&cru PCLK_PCIE_COMBO_PIPE_PHY1>,
317			 <&cru PCLK_PHP_ROOT>;
318		clock-names = "ref", "apb", "pipe";
319		assigned-clocks = <&cru CLK_REF_PIPE_PHY1>;
320		assigned-clock-rates = <100000000>;
321		#phy-cells = <1>;
322		resets = <&cru SRST_REF_PIPE_PHY1>, <&cru SRST_P_PCIE2_PHY1>;
323		reset-names = "phy", "apb";
324		rockchip,pipe-grf = <&php_grf>;
325		rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
326		status = "disabled";
327	};
328
329	pcie30phy: phy@fee80000 {
330		compatible = "rockchip,rk3588-pcie3-phy";
331		reg = <0x0 0xfee80000 0x0 0x20000>;
332		#phy-cells = <0>;
333		clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>;
334		clock-names = "pclk";
335		resets = <&cru SRST_PCIE30_PHY>;
336		reset-names = "phy";
337		rockchip,pipe-grf = <&php_grf>;
338		rockchip,phy-grf = <&pcie30_phy_grf>;
339		status = "disabled";
340	};
341};
342