xref: /linux/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi (revision 5ce42b5de461c3154f61a023b191dd6b77ee66c0)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
4 * Copyright (c) 2023 Thomas McKahan
5 *
6 */
7
8/dts-v1/;
9
10#include <dt-bindings/gpio/gpio.h>
11#include <dt-bindings/input/input.h>
12#include <dt-bindings/pinctrl/rockchip.h>
13#include <dt-bindings/usb/pd.h>
14#include "rk3588.dtsi"
15
16/ {
17	model = "FriendlyElec NanoPC-T6";
18	compatible = "friendlyarm,nanopc-t6", "rockchip,rk3588";
19
20	aliases {
21		mmc0 = &sdhci;
22		mmc1 = &sdmmc;
23	};
24
25	adc-keys-0 {
26		compatible = "adc-keys";
27		io-channels = <&saradc 0>;
28		io-channel-names = "buttons";
29		keyup-threshold-microvolt = <1800000>;
30		poll-interval = <100>;
31
32		button-maskrom {
33			label = "Mask Rom";
34			linux,code = <KEY_SETUP>;
35			press-threshold-microvolt = <2000>;
36		};
37	};
38
39	chosen {
40		stdout-path = "serial2:1500000n8";
41	};
42
43	ir-receiver {
44		compatible = "gpio-ir-receiver";
45		gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_LOW>;
46		pinctrl-names = "default";
47		pinctrl-0 = <&ir_receiver_pin>;
48	};
49
50	leds {
51		compatible = "gpio-leds";
52
53		sys_led: led-0 {
54			gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
55			label = "system-led";
56			linux,default-trigger = "heartbeat";
57			pinctrl-names = "default";
58			pinctrl-0 = <&sys_led_pin>;
59		};
60
61		usr_led: led-1 {
62			gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
63			label = "user-led";
64			pinctrl-names = "default";
65			pinctrl-0 = <&usr_led_pin>;
66		};
67	};
68
69	sound {
70		compatible = "simple-audio-card";
71		pinctrl-names = "default";
72		pinctrl-0 = <&hp_det>;
73
74		simple-audio-card,name = "realtek,rt5616-codec";
75		simple-audio-card,format = "i2s";
76		simple-audio-card,mclk-fs = <256>;
77
78		simple-audio-card,hp-det-gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_LOW>;
79
80		simple-audio-card,widgets =
81			"Headphone", "Headphones",
82			"Microphone", "Microphone Jack";
83		simple-audio-card,routing =
84			"Headphones", "HPOL",
85			"Headphones", "HPOR",
86			"MIC1", "Microphone Jack",
87			"Microphone Jack", "micbias1";
88
89		simple-audio-card,cpu {
90			sound-dai = <&i2s0_8ch>;
91		};
92		simple-audio-card,codec {
93			sound-dai = <&rt5616>;
94		};
95	};
96
97	vcc12v_dcin: vcc12v-dcin-regulator {
98		compatible = "regulator-fixed";
99		regulator-name = "vcc12v_dcin";
100		regulator-always-on;
101		regulator-boot-on;
102		regulator-min-microvolt = <12000000>;
103		regulator-max-microvolt = <12000000>;
104	};
105
106	/* vcc5v0_sys powers peripherals */
107	vcc5v0_sys: vcc5v0-sys-regulator {
108		compatible = "regulator-fixed";
109		regulator-name = "vcc5v0_sys";
110		regulator-always-on;
111		regulator-boot-on;
112		regulator-min-microvolt = <5000000>;
113		regulator-max-microvolt = <5000000>;
114		vin-supply = <&vcc12v_dcin>;
115	};
116
117	/* vcc4v0_sys powers the RK806, RK860's */
118	vcc4v0_sys: vcc4v0-sys-regulator {
119		compatible = "regulator-fixed";
120		regulator-name = "vcc4v0_sys";
121		regulator-always-on;
122		regulator-boot-on;
123		regulator-min-microvolt = <4000000>;
124		regulator-max-microvolt = <4000000>;
125		vin-supply = <&vcc12v_dcin>;
126	};
127
128	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
129		compatible = "regulator-fixed";
130		regulator-name = "vcc-1v1-nldo-s3";
131		regulator-always-on;
132		regulator-boot-on;
133		regulator-min-microvolt = <1100000>;
134		regulator-max-microvolt = <1100000>;
135		vin-supply = <&vcc4v0_sys>;
136	};
137
138	vcc_3v3_pcie20: vcc3v3-pcie20-regulator {
139		compatible = "regulator-fixed";
140		regulator-name = "vcc_3v3_pcie20";
141		regulator-always-on;
142		regulator-boot-on;
143		regulator-min-microvolt = <3300000>;
144		regulator-max-microvolt = <3300000>;
145		vin-supply = <&vcc_3v3_s3>;
146	};
147
148	vbus5v0_typec: vbus5v0-typec-regulator {
149		compatible = "regulator-fixed";
150		enable-active-high;
151		gpio = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
152		pinctrl-names = "default";
153		pinctrl-0 = <&typec5v_pwren>;
154		regulator-always-on;
155		regulator-boot-on;
156		regulator-name = "vbus5v0_typec";
157		regulator-min-microvolt = <5000000>;
158		regulator-max-microvolt = <5000000>;
159		vin-supply = <&vcc5v0_sys>;
160	};
161
162	vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
163		compatible = "regulator-fixed";
164		enable-active-high;
165		gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
166		pinctrl-names = "default";
167		pinctrl-0 = <&pcie_m2_1_pwren>;
168		regulator-name = "vcc3v3_pcie2x1l0";
169		regulator-min-microvolt = <3300000>;
170		regulator-max-microvolt = <3300000>;
171		vin-supply = <&vcc5v0_sys>;
172	};
173
174	vcc3v3_pcie30: vcc3v3-pcie30-regulator {
175		compatible = "regulator-fixed";
176		enable-active-high;
177		gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
178		pinctrl-names = "default";
179		pinctrl-0 = <&pcie_m2_0_pwren>;
180		regulator-name = "vcc3v3_pcie30";
181		regulator-min-microvolt = <3300000>;
182		regulator-max-microvolt = <3300000>;
183		vin-supply = <&vcc5v0_sys>;
184	};
185
186	vcc3v3_sd_s0: vcc3v3-sd-s0-regulator {
187		compatible = "regulator-fixed";
188		gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>;
189		regulator-boot-on;
190		regulator-max-microvolt = <3300000>;
191		regulator-min-microvolt = <3300000>;
192		regulator-name = "vcc3v3_sd_s0";
193		vin-supply = <&vcc_3v3_s3>;
194	};
195};
196
197&combphy0_ps {
198	status = "okay";
199};
200
201&combphy1_ps {
202	status = "okay";
203};
204
205&combphy2_psu {
206	status = "okay";
207};
208
209&cpu_l0 {
210	cpu-supply = <&vdd_cpu_lit_s0>;
211};
212
213&cpu_l1 {
214	cpu-supply = <&vdd_cpu_lit_s0>;
215};
216
217&cpu_l2 {
218	cpu-supply = <&vdd_cpu_lit_s0>;
219};
220
221&cpu_l3 {
222	cpu-supply = <&vdd_cpu_lit_s0>;
223};
224
225&cpu_b0 {
226	cpu-supply = <&vdd_cpu_big0_s0>;
227};
228
229&cpu_b1 {
230	cpu-supply = <&vdd_cpu_big0_s0>;
231};
232
233&cpu_b2 {
234	cpu-supply = <&vdd_cpu_big1_s0>;
235};
236
237&cpu_b3 {
238	cpu-supply = <&vdd_cpu_big1_s0>;
239};
240
241&gpio0 {
242	gpio-line-names = /* GPIO0 A0-A7 */
243			  "", "", "", "",
244			  "", "", "", "",
245			  /* GPIO0 B0-B7 */
246			  "", "", "", "",
247			  "", "", "", "",
248			  /* GPIO0 C0-C7 */
249			  "", "", "", "",
250			  "HEADER_10", "HEADER_08", "HEADER_32", "",
251			  /* GPIO0 D0-D7 */
252			  "", "", "", "",
253			  "IR receiver [PWM3_IR_M0]", "", "", "";
254};
255
256&gpio1 {
257	gpio-line-names = /* GPIO1 A0-A7 */
258			  "HEADER_27", "HEADER_28", "", "",
259			  "", "", "", "HEADER_15",
260			  /* GPIO1 B0-B7 */
261			  "HEADER_26", "HEADER_21", "HEADER_19", "HEADER_23",
262			  "HEADER_24", "HEADER_22", "", "",
263			  /* GPIO1 C0-C7 */
264			  "", "", "", "",
265			  "", "", "", "",
266			  /* GPIO1 D0-D7 */
267			  "", "", "", "",
268			  "", "", "HEADER_05", "HEADER_03";
269};
270
271&gpio2 {
272	gpio-line-names = /* GPIO2 A0-A7 */
273			  "", "", "", "",
274			  "", "", "", "",
275			  /* GPIO2 B0-B7 */
276			  "", "", "", "",
277			  "", "", "", "",
278			  /* GPIO2 C0-C7 */
279			  "", "CSI1_11", "CSI1_12", "",
280			  "", "", "", "",
281			  /* GPIO2 D0-D7 */
282			  "", "", "", "",
283			  "", "", "", "";
284};
285
286&gpio3 {
287	gpio-line-names = /* GPIO3 A0-A7 */
288			  "HEADER_35", "HEADER_38", "HEADER_40", "HEADER_36",
289			  "HEADER_37", "", "DSI0_12", "",
290			  /* GPIO3 B0-B7 */
291			  "HEADER_33", "DSI0_10", "HEADER_07", "HEADER_16",
292			  "HEADER_18", "HEADER_29", "HEADER_31", "HEADER_12",
293			  /* GPIO3 C0-C7 */
294			  "DSI0_08", "DSI0_14", "HEADER_11", "HEADER_13",
295			  "", "", "", "",
296			  /* GPIO3 D0-D7 */
297			  "", "", "", "",
298			  "", "DSI1_10", "", "";
299};
300
301&gpio4 {
302	gpio-line-names = /* GPIO4 A0-A7 */
303			  "DSI1_08", "DSI1_14", "", "DSI1_12",
304			  "", "", "", "",
305			  /* GPIO4 B0-B7 */
306			  "", "", "", "",
307			  "", "", "", "",
308			  /* GPIO4 C0-C7 */
309			  "", "", "", "",
310			  "CSI0_11", "CSI0_12", "", "",
311			  /* GPIO4 D0-D7 */
312			  "", "", "", "",
313			  "", "", "", "";
314};
315
316&gpu {
317	mali-supply = <&vdd_gpu_s0>;
318	status = "okay";
319};
320
321&i2c0 {
322	pinctrl-names = "default";
323	pinctrl-0 = <&i2c0m2_xfer>;
324	status = "okay";
325
326	vdd_cpu_big0_s0: regulator@42 {
327		compatible = "rockchip,rk8602";
328		reg = <0x42>;
329		fcs,suspend-voltage-selector = <1>;
330		regulator-name = "vdd_cpu_big0_s0";
331		regulator-always-on;
332		regulator-boot-on;
333		regulator-min-microvolt = <550000>;
334		regulator-max-microvolt = <1050000>;
335		regulator-ramp-delay = <2300>;
336		vin-supply = <&vcc4v0_sys>;
337
338		regulator-state-mem {
339			regulator-off-in-suspend;
340		};
341	};
342
343	vdd_cpu_big1_s0: regulator@43 {
344		compatible = "rockchip,rk8603", "rockchip,rk8602";
345		reg = <0x43>;
346		fcs,suspend-voltage-selector = <1>;
347		regulator-name = "vdd_cpu_big1_s0";
348		regulator-always-on;
349		regulator-boot-on;
350		regulator-min-microvolt = <550000>;
351		regulator-max-microvolt = <1050000>;
352		regulator-ramp-delay = <2300>;
353		vin-supply = <&vcc4v0_sys>;
354
355		regulator-state-mem {
356			regulator-off-in-suspend;
357		};
358	};
359};
360
361&i2c2 {
362	status = "okay";
363
364	vdd_npu_s0: regulator@42 {
365		compatible = "rockchip,rk8602";
366		reg = <0x42>;
367		fcs,suspend-voltage-selector = <1>;
368		regulator-name = "vdd_npu_s0";
369		regulator-always-on;
370		regulator-boot-on;
371		regulator-min-microvolt = <550000>;
372		regulator-max-microvolt = <950000>;
373		regulator-ramp-delay = <2300>;
374		vin-supply = <&vcc4v0_sys>;
375
376		regulator-state-mem {
377			regulator-off-in-suspend;
378		};
379	};
380};
381
382&i2c6 {
383	clock-frequency = <200000>;
384	status = "okay";
385
386	fusb302: typec-portc@22 {
387		compatible = "fcs,fusb302";
388		reg = <0x22>;
389		interrupt-parent = <&gpio0>;
390		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
391		pinctrl-0 = <&usbc0_int>;
392		pinctrl-names = "default";
393		vbus-supply = <&vbus5v0_typec>;
394
395		connector {
396			compatible = "usb-c-connector";
397			data-role = "dual";
398			label = "USB-C";
399			power-role = "source";
400			source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>;
401
402			ports {
403				#address-cells = <1>;
404				#size-cells = <0>;
405
406				port@0 {
407					reg = <0>;
408					usbc0_hs: endpoint {
409						remote-endpoint = <&usb_host0_xhci_drd_sw>;
410					};
411				};
412
413				port@1 {
414					reg = <1>;
415					usbc0_ss: endpoint {
416						remote-endpoint = <&usbdp_phy0_typec_ss>;
417					};
418				};
419
420				port@2 {
421					reg = <2>;
422					usbc0_sbu: endpoint {
423						remote-endpoint = <&usbdp_phy0_typec_sbu>;
424					};
425				};
426			};
427		};
428	};
429
430	hym8563: rtc@51 {
431		compatible = "haoyu,hym8563";
432		reg = <0x51>;
433		#clock-cells = <0>;
434		clock-output-names = "hym8563";
435		pinctrl-names = "default";
436		pinctrl-0 = <&hym8563_int>;
437		interrupt-parent = <&gpio0>;
438		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
439		wakeup-source;
440	};
441};
442
443&i2c7 {
444	clock-frequency = <200000>;
445	status = "okay";
446
447	rt5616: codec@1b {
448		compatible = "realtek,rt5616";
449		reg = <0x1b>;
450		clocks = <&cru I2S0_8CH_MCLKOUT>;
451		clock-names = "mclk";
452		#sound-dai-cells = <0>;
453		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
454		assigned-clock-rates = <12288000>;
455
456		port {
457			rt5616_p0_0: endpoint {
458				remote-endpoint = <&i2s0_8ch_p0_0>;
459			};
460		};
461	};
462
463	/* connected with MIPI-CSI1 */
464};
465
466&i2c8 {
467	pinctrl-0 = <&i2c8m2_xfer>;
468};
469
470&i2s0_8ch {
471	pinctrl-names = "default";
472	pinctrl-0 = <&i2s0_lrck
473		     &i2s0_mclk
474		     &i2s0_sclk
475		     &i2s0_sdi0
476		     &i2s0_sdo0>;
477	status = "okay";
478
479	i2s0_8ch_p0: port {
480		i2s0_8ch_p0_0: endpoint {
481			dai-format = "i2s";
482			mclk-fs = <256>;
483			remote-endpoint = <&rt5616_p0_0>;
484		};
485	};
486};
487
488&pcie2x1l0 {
489	reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
490	vpcie3v3-supply = <&vcc_3v3_pcie20>;
491	pinctrl-names = "default";
492	pinctrl-0 = <&pcie2_0_rst>;
493	status = "okay";
494};
495
496&pcie2x1l1 {
497	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
498	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
499	pinctrl-names = "default";
500	pinctrl-0 = <&pcie2_1_rst>;
501	status = "okay";
502};
503
504&pcie2x1l2 {
505	reset-gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
506	vpcie3v3-supply = <&vcc_3v3_pcie20>;
507	pinctrl-names = "default";
508	pinctrl-0 = <&pcie2_2_rst>;
509	status = "okay";
510};
511
512&pcie30phy {
513	status = "okay";
514};
515
516&pcie3x4 {
517	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
518	vpcie3v3-supply = <&vcc3v3_pcie30>;
519	status = "okay";
520};
521
522&pinctrl {
523	gpio-leds {
524		sys_led_pin: sys-led-pin {
525			rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
526		};
527
528		usr_led_pin: usr-led-pin {
529			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
530		};
531	};
532
533	headphone {
534		hp_det: hp-det {
535			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
536		};
537	};
538
539	hym8563 {
540		hym8563_int: hym8563-int {
541			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
542		};
543	};
544
545	ir-receiver {
546		ir_receiver_pin: ir-receiver-pin {
547			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
548		};
549	};
550
551	pcie {
552		pcie2_0_rst: pcie2-0-rst {
553			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
554		};
555
556		pcie2_1_rst: pcie2-1-rst {
557			rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
558		};
559
560		pcie2_2_rst: pcie2-2-rst {
561			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
562		};
563
564		pcie_m2_0_pwren: pcie-m20-pwren {
565			rockchip,pins = <2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
566		};
567
568		pcie_m2_1_pwren: pcie-m21-pwren {
569			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
570		};
571	};
572
573	usb {
574		typec5v_pwren: typec5v-pwren {
575			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
576		};
577
578		usbc0_int: usbc0-int {
579			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
580		};
581	};
582};
583
584&pwm1 {
585	pinctrl-0 = <&pwm1m1_pins>;
586	status = "okay";
587};
588
589&saradc {
590	vref-supply = <&avcc_1v8_s0>;
591	status = "okay";
592};
593
594&sdhci {
595	bus-width = <8>;
596	no-sdio;
597	no-sd;
598	non-removable;
599	max-frequency = <200000000>;
600	mmc-hs400-1_8v;
601	mmc-hs400-enhanced-strobe;
602	status = "okay";
603};
604
605&sdmmc {
606	bus-width = <4>;
607	cap-mmc-highspeed;
608	cap-sd-highspeed;
609	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
610	disable-wp;
611	no-mmc;
612	no-sdio;
613	sd-uhs-sdr104;
614	vmmc-supply = <&vcc3v3_sd_s0>;
615	vqmmc-supply = <&vccio_sd_s0>;
616	status = "okay";
617};
618
619/* optional on non-LTS, populated on LTS version */
620&sfc {
621	pinctrl-names = "default";
622	pinctrl-0 = <&fspim1_pins>;
623	status = "okay";
624
625	flash@0 {
626		compatible = "jedec,spi-nor";
627		reg = <0>;
628		spi-max-frequency = <104000000>;
629		spi-rx-bus-width = <4>;
630		spi-tx-bus-width = <1>;
631	};
632};
633
634&spi2 {
635	status = "okay";
636	assigned-clocks = <&cru CLK_SPI2>;
637	assigned-clock-rates = <200000000>;
638	pinctrl-names = "default";
639	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
640	num-cs = <1>;
641
642	pmic@0 {
643		compatible = "rockchip,rk806";
644		spi-max-frequency = <1000000>;
645		reg = <0x0>;
646
647		interrupt-parent = <&gpio0>;
648		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
649
650		pinctrl-names = "default";
651		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
652			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
653
654		system-power-controller;
655
656		vcc1-supply = <&vcc4v0_sys>;
657		vcc2-supply = <&vcc4v0_sys>;
658		vcc3-supply = <&vcc4v0_sys>;
659		vcc4-supply = <&vcc4v0_sys>;
660		vcc5-supply = <&vcc4v0_sys>;
661		vcc6-supply = <&vcc4v0_sys>;
662		vcc7-supply = <&vcc4v0_sys>;
663		vcc8-supply = <&vcc4v0_sys>;
664		vcc9-supply = <&vcc4v0_sys>;
665		vcc10-supply = <&vcc4v0_sys>;
666		vcc11-supply = <&vcc_2v0_pldo_s3>;
667		vcc12-supply = <&vcc4v0_sys>;
668		vcc13-supply = <&vcc_1v1_nldo_s3>;
669		vcc14-supply = <&vcc_1v1_nldo_s3>;
670		vcca-supply = <&vcc4v0_sys>;
671
672		gpio-controller;
673		#gpio-cells = <2>;
674
675		rk806_dvs1_null: dvs1-null-pins {
676			pins = "gpio_pwrctrl1";
677			function = "pin_fun0";
678		};
679
680		rk806_dvs2_null: dvs2-null-pins {
681			pins = "gpio_pwrctrl2";
682			function = "pin_fun0";
683		};
684
685		rk806_dvs3_null: dvs3-null-pins {
686			pins = "gpio_pwrctrl3";
687			function = "pin_fun0";
688		};
689
690		regulators {
691			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
692				regulator-boot-on;
693				regulator-min-microvolt = <550000>;
694				regulator-max-microvolt = <950000>;
695				regulator-ramp-delay = <12500>;
696				regulator-name = "vdd_gpu_s0";
697				regulator-enable-ramp-delay = <400>;
698
699				regulator-state-mem {
700					regulator-off-in-suspend;
701				};
702			};
703
704			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
705				regulator-always-on;
706				regulator-boot-on;
707				regulator-min-microvolt = <550000>;
708				regulator-max-microvolt = <950000>;
709				regulator-ramp-delay = <12500>;
710				regulator-name = "vdd_cpu_lit_s0";
711
712				regulator-state-mem {
713					regulator-off-in-suspend;
714				};
715			};
716
717			vdd_log_s0: dcdc-reg3 {
718				regulator-always-on;
719				regulator-boot-on;
720				regulator-min-microvolt = <675000>;
721				regulator-max-microvolt = <750000>;
722				regulator-ramp-delay = <12500>;
723				regulator-name = "vdd_log_s0";
724
725				regulator-state-mem {
726					regulator-off-in-suspend;
727					regulator-suspend-microvolt = <750000>;
728				};
729			};
730
731			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
732				regulator-always-on;
733				regulator-boot-on;
734				regulator-min-microvolt = <550000>;
735				regulator-max-microvolt = <950000>;
736				regulator-ramp-delay = <12500>;
737				regulator-name = "vdd_vdenc_s0";
738
739				regulator-state-mem {
740					regulator-off-in-suspend;
741				};
742			};
743
744			vdd_ddr_s0: dcdc-reg5 {
745				regulator-always-on;
746				regulator-boot-on;
747				regulator-min-microvolt = <675000>;
748				regulator-max-microvolt = <900000>;
749				regulator-ramp-delay = <12500>;
750				regulator-name = "vdd_ddr_s0";
751
752				regulator-state-mem {
753					regulator-off-in-suspend;
754					regulator-suspend-microvolt = <850000>;
755				};
756			};
757
758			vdd2_ddr_s3: dcdc-reg6 {
759				regulator-always-on;
760				regulator-boot-on;
761				regulator-name = "vdd2_ddr_s3";
762
763				regulator-state-mem {
764					regulator-on-in-suspend;
765				};
766			};
767
768			vcc_2v0_pldo_s3: dcdc-reg7 {
769				regulator-always-on;
770				regulator-boot-on;
771				regulator-min-microvolt = <2000000>;
772				regulator-max-microvolt = <2000000>;
773				regulator-ramp-delay = <12500>;
774				regulator-name = "vdd_2v0_pldo_s3";
775
776				regulator-state-mem {
777					regulator-on-in-suspend;
778					regulator-suspend-microvolt = <2000000>;
779				};
780			};
781
782			vcc_3v3_s3: dcdc-reg8 {
783				regulator-always-on;
784				regulator-boot-on;
785				regulator-min-microvolt = <3300000>;
786				regulator-max-microvolt = <3300000>;
787				regulator-name = "vcc_3v3_s3";
788
789				regulator-state-mem {
790					regulator-on-in-suspend;
791					regulator-suspend-microvolt = <3300000>;
792				};
793			};
794
795			vddq_ddr_s0: dcdc-reg9 {
796				regulator-always-on;
797				regulator-boot-on;
798				regulator-name = "vddq_ddr_s0";
799
800				regulator-state-mem {
801					regulator-off-in-suspend;
802				};
803			};
804
805			vcc_1v8_s3: dcdc-reg10 {
806				regulator-always-on;
807				regulator-boot-on;
808				regulator-min-microvolt = <1800000>;
809				regulator-max-microvolt = <1800000>;
810				regulator-name = "vcc_1v8_s3";
811
812				regulator-state-mem {
813					regulator-on-in-suspend;
814					regulator-suspend-microvolt = <1800000>;
815				};
816			};
817
818			avcc_1v8_s0: pldo-reg1 {
819				regulator-always-on;
820				regulator-boot-on;
821				regulator-min-microvolt = <1800000>;
822				regulator-max-microvolt = <1800000>;
823				regulator-name = "avcc_1v8_s0";
824
825				regulator-state-mem {
826					regulator-off-in-suspend;
827				};
828			};
829
830			vcc_1v8_s0: pldo-reg2 {
831				regulator-always-on;
832				regulator-boot-on;
833				regulator-min-microvolt = <1800000>;
834				regulator-max-microvolt = <1800000>;
835				regulator-name = "vcc_1v8_s0";
836
837				regulator-state-mem {
838					regulator-off-in-suspend;
839					regulator-suspend-microvolt = <1800000>;
840				};
841			};
842
843			avdd_1v2_s0: pldo-reg3 {
844				regulator-always-on;
845				regulator-boot-on;
846				regulator-min-microvolt = <1200000>;
847				regulator-max-microvolt = <1200000>;
848				regulator-name = "avdd_1v2_s0";
849
850				regulator-state-mem {
851					regulator-off-in-suspend;
852				};
853			};
854
855			vcc_3v3_s0: pldo-reg4 {
856				regulator-always-on;
857				regulator-boot-on;
858				regulator-min-microvolt = <3300000>;
859				regulator-max-microvolt = <3300000>;
860				regulator-ramp-delay = <12500>;
861				regulator-name = "vcc_3v3_s0";
862
863				regulator-state-mem {
864					regulator-off-in-suspend;
865				};
866			};
867
868			vccio_sd_s0: pldo-reg5 {
869				regulator-always-on;
870				regulator-boot-on;
871				regulator-min-microvolt = <1800000>;
872				regulator-max-microvolt = <3300000>;
873				regulator-ramp-delay = <12500>;
874				regulator-name = "vccio_sd_s0";
875
876				regulator-state-mem {
877					regulator-off-in-suspend;
878				};
879			};
880
881			pldo6_s3: pldo-reg6 {
882				regulator-always-on;
883				regulator-boot-on;
884				regulator-min-microvolt = <1800000>;
885				regulator-max-microvolt = <1800000>;
886				regulator-name = "pldo6_s3";
887
888				regulator-state-mem {
889					regulator-on-in-suspend;
890					regulator-suspend-microvolt = <1800000>;
891				};
892			};
893
894			vdd_0v75_s3: nldo-reg1 {
895				regulator-always-on;
896				regulator-boot-on;
897				regulator-min-microvolt = <750000>;
898				regulator-max-microvolt = <750000>;
899				regulator-name = "vdd_0v75_s3";
900
901				regulator-state-mem {
902					regulator-on-in-suspend;
903					regulator-suspend-microvolt = <750000>;
904				};
905			};
906
907			vdd_ddr_pll_s0: nldo-reg2 {
908				regulator-always-on;
909				regulator-boot-on;
910				regulator-min-microvolt = <850000>;
911				regulator-max-microvolt = <850000>;
912				regulator-name = "vdd_ddr_pll_s0";
913
914				regulator-state-mem {
915					regulator-off-in-suspend;
916					regulator-suspend-microvolt = <850000>;
917				};
918			};
919
920			avdd_0v75_s0: nldo-reg3 {
921				regulator-always-on;
922				regulator-boot-on;
923				regulator-min-microvolt = <750000>;
924				regulator-max-microvolt = <750000>;
925				regulator-name = "avdd_0v75_s0";
926
927				regulator-state-mem {
928					regulator-off-in-suspend;
929				};
930			};
931
932			vdd_0v85_s0: nldo-reg4 {
933				regulator-always-on;
934				regulator-boot-on;
935				regulator-min-microvolt = <850000>;
936				regulator-max-microvolt = <850000>;
937				regulator-name = "vdd_0v85_s0";
938
939				regulator-state-mem {
940					regulator-off-in-suspend;
941				};
942			};
943
944			vdd_0v75_s0: nldo-reg5 {
945				regulator-always-on;
946				regulator-boot-on;
947				regulator-min-microvolt = <750000>;
948				regulator-max-microvolt = <750000>;
949				regulator-name = "vdd_0v75_s0";
950
951				regulator-state-mem {
952					regulator-off-in-suspend;
953				};
954			};
955		};
956	};
957};
958
959&tsadc {
960	status = "okay";
961};
962
963&uart2 {
964	pinctrl-0 = <&uart2m0_xfer>;
965	status = "okay";
966};
967
968&u2phy0 {
969	status = "okay";
970};
971
972&u2phy0_otg {
973	status = "okay";
974};
975
976&u2phy2_host {
977	status = "okay";
978};
979
980&u2phy3_host {
981	status = "okay";
982};
983
984&u2phy2 {
985	status = "okay";
986};
987
988&u2phy3 {
989	status = "okay";
990};
991
992&usbdp_phy0 {
993	mode-switch;
994	orientation-switch;
995	sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
996	sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
997	status = "okay";
998
999	port {
1000		#address-cells = <1>;
1001		#size-cells = <0>;
1002
1003		usbdp_phy0_typec_ss: endpoint@0 {
1004			reg = <0>;
1005			remote-endpoint = <&usbc0_ss>;
1006		};
1007
1008		usbdp_phy0_typec_sbu: endpoint@1 {
1009			reg = <1>;
1010			remote-endpoint = <&usbc0_sbu>;
1011		};
1012	};
1013};
1014
1015&usb_host0_ehci {
1016	status = "okay";
1017};
1018
1019&usb_host0_ohci {
1020	status = "okay";
1021};
1022
1023&usb_host0_xhci {
1024	dr_mode = "host";
1025	status = "okay";
1026	usb-role-switch;
1027
1028	port {
1029		usb_host0_xhci_drd_sw: endpoint {
1030			remote-endpoint = <&usbc0_hs>;
1031		};
1032	};
1033};
1034
1035&usb_host1_ehci {
1036	status = "okay";
1037};
1038
1039&usb_host1_ohci {
1040	status = "okay";
1041};
1042