1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2 3/dts-v1/; 4 5#include <dt-bindings/gpio/gpio.h> 6#include <dt-bindings/pinctrl/rockchip.h> 7#include <dt-bindings/soc/rockchip,vop2.h> 8#include "rk3566.dtsi" 9 10/ { 11 model = "Pine64 SOQuartz system on module"; 12 compatible = "pine64,soquartz", "rockchip,rk3566"; 13 14 aliases { 15 mmc0 = &sdmmc0; 16 mmc1 = &sdhci; 17 mmc2 = &sdmmc1; 18 }; 19 20 chosen: chosen { 21 stdout-path = "serial2:1500000n8"; 22 }; 23 24 gmac1_clkin: external-gmac1-clock { 25 compatible = "fixed-clock"; 26 clock-frequency = <125000000>; 27 clock-output-names = "gmac1_clkin"; 28 #clock-cells = <0>; 29 }; 30 31 hdmi-con { 32 compatible = "hdmi-connector"; 33 type = "a"; 34 35 port { 36 hdmi_con_in: endpoint { 37 remote-endpoint = <&hdmi_out_con>; 38 }; 39 }; 40 }; 41 42 leds { 43 compatible = "gpio-leds"; 44 45 led_diy: led-diy { 46 label = "diy-led"; 47 default-state = "on"; 48 gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>; 49 linux,default-trigger = "heartbeat"; 50 pinctrl-names = "default"; 51 pinctrl-0 = <&diy_led_enable_h>; 52 retain-state-suspended; 53 status = "disabled"; 54 }; 55 56 led_work: led-work { 57 label = "work-led"; 58 default-state = "off"; 59 gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; 60 pinctrl-names = "default"; 61 pinctrl-0 = <&work_led_enable_h>; 62 retain-state-suspended; 63 status = "disabled"; 64 }; 65 }; 66 67 sdio_pwrseq: sdio-pwrseq { 68 status = "okay"; 69 compatible = "mmc-pwrseq-simple"; 70 clocks = <&rk809 1>; 71 clock-names = "ext_clock"; 72 pinctrl-names = "default"; 73 pinctrl-0 = <&wifi_enable_h>; 74 reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; 75 }; 76 77 vbus: regulator-vbus { 78 compatible = "regulator-fixed"; 79 regulator-name = "vbus"; 80 regulator-always-on; 81 regulator-boot-on; 82 regulator-min-microvolt = <5000000>; 83 regulator-max-microvolt = <5000000>; 84 }; 85 86 /* sourced from vbus, vbus is provided by the carrier board */ 87 vcc5v0_sys: regulator-vcc5v0-sys { 88 compatible = "regulator-fixed"; 89 regulator-name = "vcc5v0_sys"; 90 regulator-always-on; 91 regulator-boot-on; 92 regulator-min-microvolt = <5000000>; 93 regulator-max-microvolt = <5000000>; 94 vin-supply = <&vbus>; 95 }; 96 97 vcc3v3_sys: regulator-vcc3v3-sys { 98 compatible = "regulator-fixed"; 99 regulator-name = "vcc3v3_sys"; 100 regulator-always-on; 101 regulator-boot-on; 102 regulator-min-microvolt = <3300000>; 103 regulator-max-microvolt = <3300000>; 104 vin-supply = <&vcc5v0_sys>; 105 }; 106}; 107 108&cpu0 { 109 cpu-supply = <&vdd_cpu>; 110}; 111 112&cpu1 { 113 cpu-supply = <&vdd_cpu>; 114}; 115 116&cpu2 { 117 cpu-supply = <&vdd_cpu>; 118}; 119 120&cpu3 { 121 cpu-supply = <&vdd_cpu>; 122}; 123 124&gmac1 { 125 assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; 126 assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; 127 clock_in_out = "input"; 128 phy-supply = <&vcc_3v3>; 129 phy-mode = "rgmii"; 130 pinctrl-names = "default"; 131 pinctrl-0 = <&gmac1m0_miim 132 &gmac1m0_tx_bus2 133 &gmac1m0_rx_bus2 134 &gmac1m0_rgmii_clk 135 &gmac1m0_clkinout 136 &gmac1m0_rgmii_bus>; 137 snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; 138 snps,reset-active-low; 139 /* Reset time is 20ms, 100ms for rtl8211f, also works well here */ 140 snps,reset-delays-us = <0 20000 100000>; 141 tx_delay = <0x30>; 142 rx_delay = <0x10>; 143 phy-handle = <&rgmii_phy1>; 144 status = "disabled"; 145}; 146 147&gpio0 { 148 nextrst-hog { 149 gpio-hog; 150 /* 151 * GPIO_ACTIVE_LOW + output-low here means that the pin is set 152 * to high, because output-low decides the value pre-inversion. 153 */ 154 gpios = <RK_PA5 GPIO_ACTIVE_LOW>; 155 line-name = "nEXTRST"; 156 output-low; 157 }; 158}; 159 160&gpu { 161 mali-supply = <&vdd_gpu>; 162 status = "okay"; 163}; 164 165&hdmi { 166 avdd-0v9-supply = <&vdda0v9_image>; 167 avdd-1v8-supply = <&vcca1v8_image>; 168 status = "okay"; 169}; 170 171&hdmi_in { 172 hdmi_in_vp0: endpoint { 173 remote-endpoint = <&vp0_out_hdmi>; 174 }; 175}; 176 177&hdmi_out { 178 hdmi_out_con: endpoint { 179 remote-endpoint = <&hdmi_con_in>; 180 }; 181}; 182 183&hdmi_sound { 184 status = "okay"; 185}; 186 187&i2c0 { 188 status = "okay"; 189 190 vdd_cpu: regulator@1c { 191 compatible = "tcs,tcs4525"; 192 reg = <0x1c>; 193 fcs,suspend-voltage-selector = <1>; 194 regulator-name = "vdd_cpu"; 195 regulator-min-microvolt = <800000>; 196 regulator-max-microvolt = <1150000>; 197 regulator-ramp-delay = <2300>; 198 regulator-always-on; 199 regulator-boot-on; 200 vin-supply = <&vcc5v0_sys>; 201 202 regulator-state-mem { 203 regulator-off-in-suspend; 204 }; 205 }; 206 207 rk809: pmic@20 { 208 compatible = "rockchip,rk809"; 209 reg = <0x20>; 210 interrupt-parent = <&gpio0>; 211 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; 212 #clock-cells = <1>; 213 clock-output-names = "rk808-clkout1", "rk808-clkout2"; 214 pinctrl-names = "default"; 215 pinctrl-0 = <&pmic_int_l>; 216 system-power-controller; 217 wakeup-source; 218 219 vcc1-supply = <&vcc3v3_sys>; 220 vcc2-supply = <&vcc3v3_sys>; 221 vcc3-supply = <&vcc3v3_sys>; 222 vcc4-supply = <&vcc3v3_sys>; 223 vcc5-supply = <&vcc3v3_sys>; 224 vcc6-supply = <&vcc3v3_sys>; 225 vcc7-supply = <&vcc3v3_sys>; 226 vcc8-supply = <&vcc3v3_sys>; 227 vcc9-supply = <&vcc3v3_sys>; 228 229 regulators { 230 vdd_logic: DCDC_REG1 { 231 regulator-name = "vdd_logic"; 232 regulator-always-on; 233 regulator-boot-on; 234 regulator-min-microvolt = <500000>; 235 regulator-max-microvolt = <1350000>; 236 regulator-ramp-delay = <6001>; 237 regulator-initial-mode = <0x2>; 238 regulator-state-mem { 239 regulator-on-in-suspend; 240 regulator-suspend-microvolt = <900000>; 241 }; 242 }; 243 244 vdd_gpu: DCDC_REG2 { 245 regulator-name = "vdd_gpu"; 246 regulator-always-on; 247 regulator-boot-on; 248 regulator-min-microvolt = <500000>; 249 regulator-max-microvolt = <1350000>; 250 regulator-ramp-delay = <6001>; 251 regulator-initial-mode = <0x2>; 252 regulator-state-mem { 253 regulator-off-in-suspend; 254 }; 255 }; 256 257 vcc_ddr: DCDC_REG3 { 258 regulator-always-on; 259 regulator-boot-on; 260 regulator-initial-mode = <0x2>; 261 regulator-name = "vcc_ddr"; 262 regulator-state-mem { 263 regulator-on-in-suspend; 264 }; 265 }; 266 267 vdd_npu: DCDC_REG4 { 268 regulator-always-on; 269 regulator-boot-on; 270 regulator-min-microvolt = <500000>; 271 regulator-max-microvolt = <1350000>; 272 regulator-initial-mode = <0x2>; 273 regulator-name = "vdd_npu"; 274 regulator-state-mem { 275 regulator-off-in-suspend; 276 }; 277 }; 278 279 vcc_1v8: DCDC_REG5 { 280 regulator-name = "vcc_1v8"; 281 regulator-always-on; 282 regulator-boot-on; 283 regulator-min-microvolt = <1800000>; 284 regulator-max-microvolt = <1800000>; 285 regulator-state-mem { 286 regulator-on-in-suspend; 287 regulator-suspend-microvolt = <1800000>; 288 }; 289 }; 290 291 vdda0v9_image: LDO_REG1 { 292 regulator-always-on; 293 regulator-boot-on; 294 regulator-min-microvolt = <900000>; 295 regulator-max-microvolt = <900000>; 296 regulator-name = "vdda0v9_image"; 297 regulator-state-mem { 298 regulator-on-in-suspend; 299 regulator-suspend-microvolt = <900000>; 300 }; 301 }; 302 303 vdda_0v9: LDO_REG2 { 304 regulator-always-on; 305 regulator-boot-on; 306 regulator-min-microvolt = <900000>; 307 regulator-max-microvolt = <900000>; 308 regulator-name = "vdda_0v9"; 309 regulator-state-mem { 310 regulator-off-in-suspend; 311 }; 312 }; 313 314 vdda0v9_pmu: LDO_REG3 { 315 regulator-always-on; 316 regulator-boot-on; 317 regulator-min-microvolt = <900000>; 318 regulator-max-microvolt = <900000>; 319 regulator-name = "vdda0v9_pmu"; 320 regulator-state-mem { 321 regulator-on-in-suspend; 322 regulator-suspend-microvolt = <900000>; 323 }; 324 }; 325 326 vccio_acodec: LDO_REG4 { 327 regulator-always-on; 328 regulator-boot-on; 329 regulator-min-microvolt = <3300000>; 330 regulator-max-microvolt = <3300000>; 331 regulator-name = "vccio_acodec"; 332 regulator-state-mem { 333 regulator-off-in-suspend; 334 }; 335 }; 336 337 vccio_sd: LDO_REG5 { 338 regulator-always-on; 339 regulator-boot-on; 340 regulator-min-microvolt = <1800000>; 341 regulator-max-microvolt = <3300000>; 342 regulator-name = "vccio_sd"; 343 regulator-state-mem { 344 regulator-off-in-suspend; 345 }; 346 }; 347 348 vcc3v3_pmu: LDO_REG6 { 349 regulator-always-on; 350 regulator-boot-on; 351 regulator-min-microvolt = <3300000>; 352 regulator-max-microvolt = <3300000>; 353 regulator-name = "vcc3v3_pmu"; 354 regulator-state-mem { 355 regulator-on-in-suspend; 356 regulator-suspend-microvolt = <3300000>; 357 }; 358 }; 359 360 vcca_1v8: LDO_REG7 { 361 regulator-always-on; 362 regulator-boot-on; 363 regulator-min-microvolt = <1800000>; 364 regulator-max-microvolt = <1800000>; 365 regulator-name = "vcca_1v8"; 366 regulator-state-mem { 367 regulator-off-in-suspend; 368 }; 369 }; 370 371 vcca1v8_pmu: LDO_REG8 { 372 regulator-always-on; 373 regulator-boot-on; 374 regulator-min-microvolt = <1800000>; 375 regulator-max-microvolt = <1800000>; 376 regulator-name = "vcca1v8_pmu"; 377 regulator-state-mem { 378 regulator-off-in-suspend; 379 }; 380 }; 381 382 vcca1v8_image: LDO_REG9 { 383 regulator-always-on; 384 regulator-boot-on; 385 regulator-min-microvolt = <1800000>; 386 regulator-max-microvolt = <1800000>; 387 regulator-name = "vcca1v8_image"; 388 regulator-state-mem { 389 regulator-off-in-suspend; 390 }; 391 }; 392 393 vcc_3v3: SWITCH_REG1 { 394 regulator-name = "vcc_3v3"; 395 regulator-state-mem { 396 regulator-off-in-suspend; 397 }; 398 }; 399 400 vcc3v3_sd: SWITCH_REG2 { 401 regulator-name = "vcc3v3_sd"; 402 status = "disabled"; 403 regulator-state-mem { 404 regulator-on-in-suspend; 405 }; 406 }; 407 408 }; 409 }; 410}; 411 412/* 413 * i2c1 is exposed on CM1 / Module1A 414 * pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu 415 * pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu 416 */ 417&i2c1 { 418 status = "disabled"; 419}; 420 421/* 422 * i2c2 is exposed on CM1 / Module1A 423 * pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch 424 * pin 58 - i2c2_sda_m1, pullup to vcc_3v3 425 */ 426&i2c2 { 427 pinctrl-names = "default"; 428 pinctrl-0 = <&i2c2m1_xfer>; 429 status = "disabled"; 430}; 431 432/* 433 * i2c3 is exposed on CM1 / Module1A 434 * pin 35 - i2c3_scl_m0, pullup to vcc_3v3 435 * pin 36 - i2c3_sda_m0, pullup to vcc_3v3 436 */ 437&i2c3 { 438 status = "disabled"; 439}; 440 441/* 442 * i2c4 is exposed on CM2 / Module1B 443 * pin 45 - i2c4_scl_m1 444 * pin 47 - i2c4_sda_m1 445 */ 446&i2c4 { 447 pinctrl-names = "default"; 448 pinctrl-0 = <&i2c4m1_xfer>; 449 status = "disabled"; 450}; 451 452&i2s0_8ch { 453 status = "okay"; 454}; 455 456/* 457 * i2s1_8ch is exposed on CM1 / Module1A 458 * pin 24 - i2s1_sdi1_m1 459 * pin 25 - i2s1_sdo0_m1 460 * pin 26 - i2s1_lrck_tx_m1 461 * pin 27 - i2s1_sdi0_m1 462 * pin 29 - i2s1_sdi3_m1 463 * pin 30 - i2s1_sdi2_m1 464 * pin 40 - i2s1_sdo1_m1, shared with spi3 465 * pin 41 - i2s1_sdo2_m1 466 * pin 49 - i2s1_sclk_tx_m1 467 * pin 50 - i2s1_mclk_m1 468 * pin 56 - i2s1_sdo3_m1, shared with i2c2 469 */ 470&i2s1_8ch { 471 pinctrl-names = "default"; 472 pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx 473 &i2s1m1_lrcktx &i2s1m1_lrckrx 474 &i2s1m1_sdi0 &i2s1m1_sdi1 475 &i2s1m1_sdi2 &i2s1m1_sdi3 476 &i2s1m1_sdo0 &i2s1m1_sdo1 477 &i2s1m1_sdo2 &i2s1m1_sdo3>; 478 status = "disabled"; 479}; 480 481&mdio1 { 482 rgmii_phy1: ethernet-phy@0 { 483 compatible = "ethernet-phy-ieee802.3-c22"; 484 reg = <0>; 485 status = "disabled"; 486 }; 487}; 488 489&pcie2x1 { 490 pinctrl-names = "default"; 491 pinctrl-0 = <&pcie_reset_h>; 492 reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; 493}; 494 495&pinctrl { 496 bt { 497 bt_enable_h: bt-enable-h { 498 rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; 499 }; 500 501 bt_host_wake_l: bt-host-wake-l { 502 rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; 503 }; 504 505 bt_wake_l: bt-wake-l { 506 rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; 507 }; 508 }; 509 510 leds { 511 work_led_enable_h: work-led-enable-h { 512 rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; 513 }; 514 515 diy_led_enable_h: diy-led-enable-h { 516 rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; 517 }; 518 }; 519 520 pcie { 521 pcie_clkreq_h: pcie-clkreq-h { 522 rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; 523 }; 524 pcie_reset_h: pcie-reset-h { 525 rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; 526 }; 527 }; 528 529 pmic { 530 pmic_int_l: pmic-int-l { 531 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; 532 }; 533 }; 534 535 sdio-pwrseq { 536 wifi_enable_h: wifi-enable-h { 537 rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; 538 }; 539 }; 540}; 541 542&pmu_io_domains { 543 pmuio1-supply = <&vcc3v3_pmu>; 544 pmuio2-supply = <&vcc3v3_pmu>; 545 vccio1-supply = <&vcc_3v3>; 546 vccio2-supply = <&vcc_1v8>; 547 vccio3-supply = <&vccio_sd>; 548 vccio4-supply = <&vcc_1v8>; 549 vccio5-supply = <&vcc_3v3>; 550 vccio6-supply = <&vcc_3v3>; 551 vccio7-supply = <&vcc_3v3>; 552 status = "okay"; 553}; 554 555/* 556 * saradc is exposed on CM1 / Module1A 557 * pin 94 - saradc_vin3 558 * pin 96 - saradc_vin2 559 */ 560&saradc { 561 vref-supply = <&vcca_1v8>; 562 status = "disabled"; 563}; 564 565&sdhci { 566 bus-width = <8>; 567 mmc-hs200-1_8v; 568 non-removable; 569 vmmc-supply = <&vcc_3v3>; 570 vqmmc-supply = <&vcc_1v8>; 571 status = "okay"; 572}; 573 574&sdmmc0 { 575 broken-cd; 576 bus-width = <4>; 577 cap-sd-highspeed; 578 disable-wp; 579 pinctrl-names = "default"; 580 pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; 581 vqmmc-supply = <&vccio_sd>; 582 status = "disabled"; 583}; 584 585&sdmmc1 { 586 bus-width = <4>; 587 cap-sd-highspeed; 588 cap-sdio-irq; 589 keep-power-in-suspend; 590 mmc-pwrseq = <&sdio_pwrseq>; 591 non-removable; 592 pinctrl-names = "default"; 593 pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; 594 sd-uhs-sdr50; 595 vmmc-supply = <&vcc3v3_sys>; 596 vqmmc-supply = <&vcc_1v8>; 597 status = "okay"; 598}; 599 600/* 601 * spi3 is exposed on CM1 / Module1A 602 * pin 37 - spi3_cs1_m0 603 * pin 38 - spi3_clk_m0 604 * pin 39 - spi3_cs0_m0 605 * pin 40 - spi3_miso_m0, shared with i2s1_8ch 606 * pin 44 - spi3_mosi_m0 607 */ 608&spi3 { 609 status = "disabled"; 610}; 611 612&tsadc { 613 status = "okay"; 614}; 615 616&uart1 { 617 dma-names = "tx", "rx"; 618 pinctrl-names = "default"; 619 pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; 620 uart-has-rtscts; 621 status = "okay"; 622 623 bluetooth { 624 compatible = "brcm,bcm43438-bt"; 625 clocks = <&rk809 1>; 626 clock-names = "lpo"; 627 device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; 628 host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; 629 shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; 630 pinctrl-names = "default"; 631 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; 632 vbat-supply = <&vcc3v3_sys>; 633 vddio-supply = <&vcca1v8_pmu>; 634 }; 635}; 636 637/* 638 * uart2 is exposed on CM1 / Module1A 639 * pin 51 - uart2_rx_m0 640 * pin 55 - uart2_tx_m0 641 */ 642&uart2 { 643 status = "disabled"; 644}; 645 646/* 647 * uart7 is exposed on CM1 / Module1A 648 * pin 46 - uart7_tx_m2 649 * pin 47 - uart7_rx_m2 650 */ 651&uart7 { 652 pinctrl-names = "default"; 653 pinctrl-0 = <&uart7m2_xfer>; 654 status = "disabled"; 655}; 656 657/* dwc3_otg is the only usb port available */ 658&usb2phy0 { 659 status = "disabled"; 660}; 661 662&usb2phy0_otg { 663 status = "disabled"; 664}; 665 666&usb_host0_xhci { 667 status = "disabled"; 668}; 669 670&vop { 671 assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; 672 assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; 673 status = "okay"; 674}; 675 676&vop_mmu { 677 status = "okay"; 678}; 679 680&vp0 { 681 vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { 682 reg = <ROCKCHIP_VOP2_EP_HDMI0>; 683 remote-endpoint = <&hdmi_in_vp0>; 684 }; 685}; 686