xref: /linux/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts (revision 6f23fc47c1b2ac226704fb7294f43ed3b0965e51) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2022 Radxa Limited
4 * Copyright (c) 2022 Amarula Solutions(India)
5 */
6
7/dts-v1/;
8#include <dt-bindings/soc/rockchip,vop2.h>
9#include "rk3566.dtsi"
10#include "rk3566-radxa-cm3.dtsi"
11
12/ {
13	model = "Radxa Compute Module 3(CM3) IO Board";
14	compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
15
16	aliases {
17		mmc1 = &sdmmc0;
18	};
19
20	chosen: chosen {
21		stdout-path = "serial2:1500000n8";
22	};
23
24	gmac1_clkin: external-gmac1-clock {
25		compatible = "fixed-clock";
26		clock-frequency = <125000000>;
27		clock-output-names = "gmac1_clkin";
28		#clock-cells = <0>;
29	};
30
31	hdmi-con {
32		compatible = "hdmi-connector";
33		type = "a";
34
35		port {
36			hdmi_con_in: endpoint {
37				remote-endpoint = <&hdmi_out_con>;
38			};
39		};
40	};
41
42	leds {
43		compatible = "gpio-leds";
44
45		led-1 {
46			gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
47			color = <LED_COLOR_ID_GREEN>;
48			function = LED_FUNCTION_ACTIVITY;
49			linux,default-trigger = "heartbeat";
50			pinctrl-names = "default";
51			pinctrl-0 = <&pi_nled_activity>;
52		};
53	};
54
55	vcc5v0_usb30: vcc5v0-usb30-regulator {
56		compatible = "regulator-fixed";
57		regulator-name = "vcc5v0_usb30";
58		enable-active-high;
59		gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
60		pinctrl-names = "default";
61		pinctrl-0 = <&vcc5v0_usb30_en_h>;
62		regulator-always-on;
63		regulator-min-microvolt = <5000000>;
64		regulator-max-microvolt = <5000000>;
65		vin-supply = <&vcc_sys>;
66	};
67
68	vcca1v8_image: vcca1v8-image-regulator {
69		compatible = "regulator-fixed";
70		regulator-name = "vcca1v8_image";
71		regulator-always-on;
72		regulator-boot-on;
73		regulator-min-microvolt = <1800000>;
74		regulator-max-microvolt = <1800000>;
75		vin-supply = <&vcc_1v8_p>;
76	};
77
78	vdda0v9_image: vdda0v9-image-regulator {
79		compatible = "regulator-fixed";
80		regulator-name = "vcca0v9_image";
81		regulator-always-on;
82		regulator-boot-on;
83		regulator-min-microvolt = <900000>;
84		regulator-max-microvolt = <900000>;
85		vin-supply = <&vdda_0v9>;
86	};
87};
88
89&combphy1 {
90	status = "okay";
91};
92
93&gmac1 {
94	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
95	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
96	assigned-clock-rates = <0>, <125000000>;
97	clock_in_out = "input";
98	phy-handle = <&rgmii_phy1>;
99	phy-mode = "rgmii";
100	pinctrl-names = "default";
101	pinctrl-0 = <&gmac1m0_miim
102		     &gmac1m0_tx_bus2
103		     &gmac1m0_rx_bus2
104		     &gmac1m0_rgmii_clk
105		     &gmac1m0_rgmii_bus
106		     &gmac1m0_clkinout>;
107	snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
108	snps,reset-active-low;
109	/* Reset time is 20ms, 100ms for rtl8211f */
110	snps,reset-delays-us = <0 20000 100000>;
111	tx_delay = <0x46>;
112	rx_delay = <0x2e>;
113	status = "okay";
114};
115
116&hdmi {
117	avdd-0v9-supply = <&vdda0v9_image>;
118	avdd-1v8-supply = <&vcca1v8_image>;
119	status = "okay";
120};
121
122&hdmi_in {
123	hdmi_in_vp0: endpoint {
124		remote-endpoint = <&vp0_out_hdmi>;
125	};
126};
127
128&hdmi_out {
129	hdmi_out_con: endpoint {
130		remote-endpoint = <&hdmi_con_in>;
131	};
132};
133
134&hdmi_sound {
135	status = "okay";
136};
137
138&mdio1 {
139	rgmii_phy1: ethernet-phy@0 {
140		compatible = "ethernet-phy-ieee802.3-c22";
141		reg = <0x0>;
142	};
143};
144
145&pinctrl {
146	gmac1 {
147		gmac1m0_miim: gmac1m0-miim {
148			rockchip,pins =
149				/* gmac1_mdcm0 */
150				<3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
151				/* gmac1_mdiom0 */
152				<3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
153		};
154
155		gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
156			rockchip,pins =
157				/* gmac1_rxd0m0 */
158				<3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
159				/* gmac1_rxd1m0 */
160				<3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
161				/* gmac1_rxdvcrsm0 */
162				<3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
163		};
164
165		gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
166			rockchip,pins =
167				/* gmac1_txd0m0 */
168				<3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
169				/* gmac1_txd1m0 */
170				<3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
171				/* gmac1_txenm0 */
172				<3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
173		};
174
175		gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
176			rockchip,pins =
177				/* gmac1_rxclkm0 */
178				<3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
179				/* gmac1_txclkm0 */
180				<3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
181		};
182
183		gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
184			rockchip,pins =
185				/* gmac1_rxd2m0 */
186				<3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
187				/* gmac1_rxd3m0 */
188				<3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
189				/* gmac1_txd2m0 */
190				<3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
191				/* gmac1_txd3m0 */
192				<3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
193		};
194
195		gmac1m0_clkinout: gmac1m0-clkinout {
196			rockchip,pins =
197				/* gmac1_mclkinoutm0 */
198				<3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
199		};
200	};
201
202	leds {
203		pi_nled_activity: pi-nled-activity {
204			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
205		};
206	};
207
208	sdcard {
209		sdmmc_pwren: sdmmc-pwren {
210			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
211		};
212	};
213
214	usb {
215		vcc5v0_usb30_en_h: vcc5v0-host-en-h {
216			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
217		};
218	};
219};
220
221&sdmmc0 {
222	bus-width = <4>;
223	cap-mmc-highspeed;
224	cap-sd-highspeed;
225	disable-wp;
226	vqmmc-supply = <&vccio_sd>;
227	pinctrl-names = "default";
228	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
229	status = "okay";
230};
231
232&uart2 {
233	status = "okay";
234};
235
236&usb2phy0_host {
237	phy-supply = <&vcc5v0_usb30>;
238	status = "okay";
239};
240
241&usb2phy1_host {
242	status = "okay";
243};
244
245&usb2phy1_otg {
246	status = "okay";
247};
248
249&usb_host0_ehci {
250	status = "okay";
251};
252
253&usb_host1_xhci {
254	status = "okay";
255};
256
257&usb2phy0_otg {
258	status = "okay";
259};
260
261&usb_host0_xhci {
262	status = "okay";
263};
264
265&vop {
266	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
267	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
268	status = "okay";
269};
270
271&vop_mmu {
272	status = "okay";
273};
274
275&vp0 {
276	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
277		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
278		remote-endpoint = <&hdmi_in_vp0>;
279	};
280};
281