1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2 3/dts-v1/; 4 5#include "rk3566-orangepi-3b.dtsi" 6 7/ { 8 model = "Xunlong Orange Pi 3B v2.1"; 9 compatible = "xunlong,orangepi-3b-v2.1", "xunlong,orangepi-3b", "rockchip,rk3566"; 10 11 vccio_phy1: regulator-1v8-vccio-phy { 12 compatible = "regulator-fixed"; 13 regulator-name = "vccio_phy1"; 14 regulator-always-on; 15 regulator-boot-on; 16 regulator-max-microvolt = <1800000>; 17 regulator-min-microvolt = <1800000>; 18 }; 19}; 20 21&pmu_io_domains { 22 vccio5-supply = <&vccio_phy1>; 23}; 24 25&gmac1 { 26 phy-handle = <&rgmii_phy1>; 27 status = "okay"; 28}; 29 30&mdio1 { 31 rgmii_phy1: ethernet-phy@1 { 32 compatible = "ethernet-phy-ieee802.3-c22"; 33 reg = <1>; 34 reset-assert-us = <20000>; 35 reset-deassert-us = <50000>; 36 reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>; 37 }; 38}; 39 40&sdmmc1 { 41 #address-cells = <1>; 42 #size-cells = <0>; 43 44 brcmf: wifi@1 { 45 compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac"; 46 reg = <1>; 47 interrupt-parent = <&gpio0>; 48 interrupts = <RK_PD6 IRQ_TYPE_LEVEL_HIGH>; 49 interrupt-names = "host-wake"; 50 pinctrl-names = "default"; 51 pinctrl-0 = <&wifi_wake_host_h>; 52 }; 53}; 54 55&uart1 { 56 bluetooth { 57 compatible = "brcm,bcm4345c5"; 58 clocks = <&rk809 1>; 59 clock-names = "lpo"; 60 interrupt-parent = <&gpio2>; 61 interrupts = <RK_PC0 IRQ_TYPE_LEVEL_HIGH>; 62 interrupt-names = "host-wakeup"; 63 device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; 64 shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; 65 pinctrl-names = "default"; 66 pinctrl-0 = <&bt_reg_on_h &bt_wake_host_h &host_wake_bt_h>; 67 vbat-supply = <&vcc_3v3>; 68 vddio-supply = <&vcc_1v8>; 69 }; 70}; 71