xref: /linux/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dts (revision e9f0878c4b2004ac19581274c1ae4c61ae3ca70e)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
4 */
5
6/dts-v1/;
7#include <dt-bindings/pwm/pwm.h>
8#include "rk3399.dtsi"
9#include "rk3399-opp.dtsi"
10
11/ {
12	model = "Firefly ROC-RK3399-PC Board";
13	compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
14
15	chosen {
16		stdout-path = "serial2:1500000n8";
17	};
18
19	backlight: backlight {
20		compatible = "pwm-backlight";
21		pwms = <&pwm0 0 25000 0>;
22	};
23
24	clkin_gmac: external-gmac-clock {
25		compatible = "fixed-clock";
26		clock-frequency = <125000000>;
27		clock-output-names = "clkin_gmac";
28		#clock-cells = <0>;
29	};
30
31	sdio_pwrseq: sdio-pwrseq {
32		compatible = "mmc-pwrseq-simple";
33		clocks = <&rk808 1>;
34		clock-names = "ext_clock";
35		pinctrl-names = "default";
36		pinctrl-0 = <&wifi_enable_h>;
37
38		/*
39		 * On the module itself this is one of these (depending
40		 * on the actual card populated):
41		 * - SDIO_RESET_L_WL_REG_ON
42		 * - PDN (power down when low)
43		 */
44		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
45	};
46
47	vcc_vbus_typec0: vcc-vbus-typec0 {
48		compatible = "regulator-fixed";
49		regulator-name = "vcc_vbus_typec0";
50		regulator-always-on;
51		regulator-boot-on;
52		regulator-min-microvolt = <5000000>;
53		regulator-max-microvolt = <5000000>;
54	};
55
56	/*
57	 * should be placed inside mp8859, but not until mp8859 has
58	 * its own dt-binding.
59	 */
60	vcc12v_sys: mp8859-dcdc1 {
61		compatible = "regulator-fixed";
62		regulator-name = "vcc12v_sys";
63		regulator-always-on;
64		regulator-boot-on;
65		regulator-min-microvolt = <12000000>;
66		regulator-max-microvolt = <12000000>;
67		vin-supply = <&vcc_vbus_typec0>;
68	};
69
70	/* switched by pmic_sleep */
71	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
72		compatible = "regulator-fixed";
73		regulator-name = "vcc1v8_s3";
74		regulator-always-on;
75		regulator-boot-on;
76		regulator-min-microvolt = <1800000>;
77		regulator-max-microvolt = <1800000>;
78		vin-supply = <&vcc_1v8>;
79	};
80
81	vcc3v3_sys: vcc3v3-sys {
82		compatible = "regulator-fixed";
83		regulator-name = "vcc3v3_sys";
84		regulator-always-on;
85		regulator-boot-on;
86		regulator-min-microvolt = <3300000>;
87		regulator-max-microvolt = <3300000>;
88		vin-supply = <&vcc12v_sys>;
89	};
90
91	/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
92	vcc5v0_host: vcc5v0-host-regulator {
93		compatible = "regulator-fixed";
94		enable-active-high;
95		gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
96		pinctrl-names = "default";
97		pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
98		regulator-name = "vcc5v0_host";
99		regulator-always-on;
100		vin-supply = <&vcc_sys>;
101	};
102
103	vcc_vbus_typec1: vcc-vbus-typec1 {
104		compatible = "regulator-fixed";
105		enable-active-high;
106		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
107		pinctrl-names = "default";
108		pinctrl-0 = <&vcc_vbus_typec1_en>;
109		regulator-name = "vcc_vbus_typec1";
110		regulator-always-on;
111		vin-supply = <&vcc_sys>;
112	};
113
114	vcc_sys: vcc-sys {
115		compatible = "regulator-fixed";
116		regulator-name = "vcc_sys";
117		regulator-always-on;
118		regulator-boot-on;
119		regulator-min-microvolt = <5000000>;
120		regulator-max-microvolt = <5000000>;
121		vin-supply = <&vcc12v_sys>;
122	};
123
124	vdd_log: vdd-log {
125		compatible = "pwm-regulator";
126		pwms = <&pwm2 0 25000 1>;
127		regulator-name = "vdd_log";
128		regulator-always-on;
129		regulator-boot-on;
130		regulator-min-microvolt = <800000>;
131		regulator-max-microvolt = <1400000>;
132		vin-supply = <&vcc3v3_sys>;
133	};
134};
135
136&cpu_l0 {
137	cpu-supply = <&vdd_cpu_l>;
138};
139
140&cpu_l1 {
141	cpu-supply = <&vdd_cpu_l>;
142};
143
144&cpu_l2 {
145	cpu-supply = <&vdd_cpu_l>;
146};
147
148&cpu_l3 {
149	cpu-supply = <&vdd_cpu_l>;
150};
151
152&cpu_b0 {
153	cpu-supply = <&vdd_cpu_b>;
154};
155
156&cpu_b1 {
157	cpu-supply = <&vdd_cpu_b>;
158};
159
160&emmc_phy {
161	status = "okay";
162};
163
164&gmac {
165	assigned-clocks = <&cru SCLK_RMII_SRC>;
166	assigned-clock-parents = <&clkin_gmac>;
167	clock_in_out = "input";
168	phy-supply = <&vcc_lan>;
169	phy-mode = "rgmii";
170	pinctrl-names = "default";
171	pinctrl-0 = <&rgmii_pins>;
172	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
173	snps,reset-active-low;
174	snps,reset-delays-us = <0 10000 50000>;
175	tx_delay = <0x28>;
176	rx_delay = <0x11>;
177	status = "okay";
178};
179
180&hdmi {
181	ddc-i2c-bus = <&i2c3>;
182	pinctrl-names = "default";
183	pinctrl-0 = <&hdmi_cec>;
184	status = "okay";
185};
186
187&i2c0 {
188	clock-frequency = <400000>;
189	i2c-scl-rising-time-ns = <168>;
190	i2c-scl-falling-time-ns = <4>;
191	status = "okay";
192
193	rk808: pmic@1b {
194		compatible = "rockchip,rk808";
195		reg = <0x1b>;
196		interrupt-parent = <&gpio1>;
197		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
198		#clock-cells = <1>;
199		clock-output-names = "xin32k", "rk808-clkout2";
200		pinctrl-names = "default";
201		pinctrl-0 = <&pmic_int_l>;
202		rockchip,system-power-controller;
203		wakeup-source;
204
205		vcc1-supply = <&vcc3v3_sys>;
206		vcc2-supply = <&vcc3v3_sys>;
207		vcc3-supply = <&vcc3v3_sys>;
208		vcc4-supply = <&vcc3v3_sys>;
209		vcc6-supply = <&vcc3v3_sys>;
210		vcc7-supply = <&vcc3v3_sys>;
211		vcc8-supply = <&vcc3v3_sys>;
212		vcc9-supply = <&vcc3v3_sys>;
213		vcc10-supply = <&vcc3v3_sys>;
214		vcc11-supply = <&vcc3v3_sys>;
215		vcc12-supply = <&vcc3v3_sys>;
216		vddio-supply = <&vcc1v8_pmu>;
217
218		regulators {
219			vdd_center: DCDC_REG1 {
220				regulator-name = "vdd_center";
221				regulator-always-on;
222				regulator-boot-on;
223				regulator-min-microvolt = <750000>;
224				regulator-max-microvolt = <1350000>;
225				regulator-ramp-delay = <6001>;
226				regulator-state-mem {
227					regulator-off-in-suspend;
228				};
229			};
230
231			vdd_cpu_l: DCDC_REG2 {
232				regulator-name = "vdd_cpu_l";
233				regulator-always-on;
234				regulator-boot-on;
235				regulator-min-microvolt = <750000>;
236				regulator-max-microvolt = <1350000>;
237				regulator-ramp-delay = <6001>;
238				regulator-state-mem {
239					regulator-off-in-suspend;
240				};
241			};
242
243			vcc_ddr: DCDC_REG3 {
244				regulator-name = "vcc_ddr";
245				regulator-always-on;
246				regulator-boot-on;
247				regulator-state-mem {
248					regulator-on-in-suspend;
249				};
250			};
251
252			vcc_1v8: DCDC_REG4 {
253				regulator-name = "vcc_1v8";
254				regulator-always-on;
255				regulator-boot-on;
256				regulator-min-microvolt = <1800000>;
257				regulator-max-microvolt = <1800000>;
258				regulator-state-mem {
259					regulator-on-in-suspend;
260					regulator-suspend-microvolt = <1800000>;
261				};
262			};
263
264			vcca1v8_codec: LDO_REG1 {
265				regulator-name = "vcca1v8_codec";
266				regulator-always-on;
267				regulator-boot-on;
268				regulator-min-microvolt = <1800000>;
269				regulator-max-microvolt = <1800000>;
270				regulator-state-mem {
271					regulator-off-in-suspend;
272				};
273			};
274
275			vcc1v8_hdmi: LDO_REG2 {
276				regulator-name = "vcc1v8_hdmi";
277				regulator-always-on;
278				regulator-boot-on;
279				regulator-min-microvolt = <1800000>;
280				regulator-max-microvolt = <1800000>;
281				regulator-state-mem {
282					regulator-off-in-suspend;
283				};
284			};
285
286			vcc1v8_pmu: LDO_REG3 {
287				regulator-name = "vcc1v8_pmu";
288				regulator-always-on;
289				regulator-boot-on;
290				regulator-min-microvolt = <1800000>;
291				regulator-max-microvolt = <1800000>;
292				regulator-state-mem {
293					regulator-on-in-suspend;
294					regulator-suspend-microvolt = <1800000>;
295				};
296			};
297
298			vcc_sdio: LDO_REG4 {
299				regulator-name = "vcc_sdio";
300				regulator-always-on;
301				regulator-boot-on;
302				regulator-min-microvolt = <1800000>;
303				regulator-max-microvolt = <3000000>;
304				regulator-state-mem {
305					regulator-on-in-suspend;
306					regulator-suspend-microvolt = <3000000>;
307				};
308			};
309
310			vcca3v0_codec: LDO_REG5 {
311				regulator-name = "vcca3v0_codec";
312				regulator-always-on;
313				regulator-boot-on;
314				regulator-min-microvolt = <3000000>;
315				regulator-max-microvolt = <3000000>;
316				regulator-state-mem {
317					regulator-off-in-suspend;
318				};
319			};
320
321			vcc_1v5: LDO_REG6 {
322				regulator-name = "vcc_1v5";
323				regulator-always-on;
324				regulator-boot-on;
325				regulator-min-microvolt = <1500000>;
326				regulator-max-microvolt = <1500000>;
327				regulator-state-mem {
328					regulator-on-in-suspend;
329					regulator-suspend-microvolt = <1500000>;
330				};
331			};
332
333			vcca0v9_hdmi: LDO_REG7 {
334				regulator-name = "vcca0v9_hdmi";
335				regulator-always-on;
336				regulator-boot-on;
337				regulator-min-microvolt = <900000>;
338				regulator-max-microvolt = <900000>;
339				regulator-state-mem {
340					regulator-off-in-suspend;
341				};
342			};
343
344			vcc_3v0: LDO_REG8 {
345				regulator-name = "vcc_3v0";
346				regulator-always-on;
347				regulator-boot-on;
348				regulator-min-microvolt = <3000000>;
349				regulator-max-microvolt = <3000000>;
350				regulator-state-mem {
351					regulator-on-in-suspend;
352					regulator-suspend-microvolt = <3000000>;
353				};
354			};
355
356			vcc3v3_s3: vcc_lan: SWITCH_REG1 {
357				regulator-name = "vcc3v3_s3";
358				regulator-always-on;
359				regulator-boot-on;
360				regulator-state-mem {
361					regulator-off-in-suspend;
362				};
363			};
364
365			vcc3v3_s0: SWITCH_REG2 {
366				regulator-name = "vcc3v3_s0";
367				regulator-always-on;
368				regulator-boot-on;
369				regulator-state-mem {
370					regulator-off-in-suspend;
371				};
372			};
373		};
374	};
375
376	vdd_cpu_b: regulator@40 {
377		compatible = "silergy,syr827";
378		reg = <0x40>;
379		fcs,suspend-voltage-selector = <1>;
380		pinctrl-names = "default";
381		pinctrl-0 = <&vsel1_gpio>;
382		regulator-name = "vdd_cpu_b";
383		regulator-min-microvolt = <712500>;
384		regulator-max-microvolt = <1500000>;
385		regulator-ramp-delay = <1000>;
386		regulator-always-on;
387		regulator-boot-on;
388		vin-supply = <&vcc3v3_sys>;
389
390		regulator-state-mem {
391			regulator-off-in-suspend;
392		};
393	};
394
395	vdd_gpu: regulator@41 {
396		compatible = "silergy,syr828";
397		reg = <0x41>;
398		fcs,suspend-voltage-selector = <1>;
399		pinctrl-names = "default";
400		pinctrl-0 = <&vsel2_gpio>;
401		regulator-name = "vdd_gpu";
402		regulator-min-microvolt = <712500>;
403		regulator-max-microvolt = <1500000>;
404		regulator-ramp-delay = <1000>;
405		regulator-always-on;
406		regulator-boot-on;
407		vin-supply = <&vcc3v3_sys>;
408
409		regulator-state-mem {
410			regulator-off-in-suspend;
411		};
412	};
413};
414
415&i2c1 {
416	i2c-scl-rising-time-ns = <300>;
417	i2c-scl-falling-time-ns = <15>;
418	status = "okay";
419};
420
421&i2c3 {
422	i2c-scl-rising-time-ns = <450>;
423	i2c-scl-falling-time-ns = <15>;
424	status = "okay";
425};
426
427&i2c4 {
428	i2c-scl-rising-time-ns = <600>;
429	i2c-scl-falling-time-ns = <20>;
430	status = "okay";
431
432	fusb1: usb-typec@22 {
433		compatible = "fcs,fusb302";
434		reg = <0x22>;
435		interrupt-parent = <&gpio1>;
436		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
437		pinctrl-names = "default";
438		pinctrl-0 = <&fusb1_int>;
439		vbus-supply = <&vcc_vbus_typec1>;
440		status = "okay";
441	};
442};
443
444&i2c7 {
445	i2c-scl-rising-time-ns = <600>;
446	i2c-scl-falling-time-ns = <20>;
447	status = "okay";
448
449	fusb0: usb-typec@22 {
450		compatible = "fcs,fusb302";
451		reg = <0x22>;
452		interrupt-parent = <&gpio1>;
453		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
454		pinctrl-names = "default";
455		pinctrl-0 = <&fusb0_int>;
456		vbus-supply = <&vcc_vbus_typec0>;
457		status = "okay";
458	};
459};
460
461&i2s0 {
462	rockchip,playback-channels = <8>;
463	rockchip,capture-channels = <8>;
464	status = "okay";
465};
466
467&i2s1 {
468	rockchip,playback-channels = <2>;
469	rockchip,capture-channels = <2>;
470	status = "okay";
471};
472
473&i2s2 {
474	status = "okay";
475};
476
477&io_domains {
478	audio-supply = <&vcca1v8_codec>;
479	bt656-supply = <&vcc_3v0>;
480	gpio1830-supply = <&vcc_3v0>;
481	sdmmc-supply = <&vcc_sdio>;
482	status = "okay";
483};
484
485&pmu_io_domains {
486	pmu1830-supply = <&vcc_3v0>;
487	status = "okay";
488};
489
490&pinctrl {
491	lcd-panel {
492		lcd_panel_reset: lcd-panel-reset {
493			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
494		};
495	};
496
497	pmic {
498		vsel1_gpio: vsel1-gpio {
499			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
500		};
501
502		vsel2_gpio: vsel2-gpio {
503			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
504		};
505	};
506
507	sdio-pwrseq {
508		wifi_enable_h: wifi-enable-h {
509			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
510		};
511	};
512
513	pmic {
514		pmic_int_l: pmic-int-l {
515			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
516		};
517	};
518
519	usb2 {
520		vcc5v0_host_en: vcc5v0-host-en {
521			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
522		};
523
524		hub_rst: hub-rst {
525			rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
526		};
527	};
528
529	usb-typec {
530		vcc_vbus_typec1_en: vcc-vbus-typec1-en {
531			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
532		};
533	};
534
535	fusb30x {
536		fusb0_int: fusb0-int {
537			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
538		};
539
540		fusb1_int: fusb1-int {
541			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
542		};
543	};
544};
545
546&pwm0 {
547	status = "okay";
548};
549
550&pwm2 {
551	status = "okay";
552};
553
554&saradc {
555	vref-supply = <&vcca1v8_s3>;
556	status = "okay";
557};
558
559&sdmmc {
560	bus-width = <4>;
561	cap-mmc-highspeed;
562	cap-sd-highspeed;
563	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
564	disable-wp;
565	max-frequency = <150000000>;
566	pinctrl-names = "default";
567	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
568	status = "okay";
569};
570
571&sdhci {
572	bus-width = <8>;
573	mmc-hs400-1_8v;
574	mmc-hs400-enhanced-strobe;
575	non-removable;
576	status = "okay";
577};
578
579&tcphy0 {
580	status = "okay";
581};
582
583&tcphy1 {
584	status = "okay";
585};
586
587&tsadc {
588	/* tshut mode 0:CRU 1:GPIO */
589	rockchip,hw-tshut-mode = <1>;
590	/* tshut polarity 0:LOW 1:HIGH */
591	rockchip,hw-tshut-polarity = <1>;
592	status = "okay";
593};
594
595&u2phy0 {
596	status = "okay";
597
598	u2phy0_otg: otg-port {
599		phy-supply = <&vcc_vbus_typec0>;
600		status = "okay";
601	};
602
603	u2phy0_host: host-port {
604		phy-supply = <&vcc5v0_host>;
605		status = "okay";
606	};
607};
608
609&u2phy1 {
610	status = "okay";
611
612	u2phy1_otg: otg-port {
613		phy-supply = <&vcc_vbus_typec1>;
614		status = "okay";
615	};
616
617	u2phy1_host: host-port {
618		phy-supply = <&vcc5v0_host>;
619		status = "okay";
620	};
621};
622
623&uart0 {
624	pinctrl-names = "default";
625	pinctrl-0 = <&uart0_xfer &uart0_cts>;
626	status = "okay";
627};
628
629&uart2 {
630	status = "okay";
631};
632
633&usb_host0_ehci {
634	status = "okay";
635};
636
637&usb_host0_ohci {
638	status = "okay";
639};
640
641&usb_host1_ehci {
642	status = "okay";
643};
644
645&usb_host1_ohci {
646	status = "okay";
647};
648
649&usbdrd3_0 {
650	status = "okay";
651};
652
653&usbdrd_dwc3_0 {
654	status = "okay";
655};
656
657&usbdrd3_1 {
658	status = "okay";
659};
660
661&usbdrd_dwc3_1 {
662	status = "okay";
663	dr_mode = "host";
664};
665
666&vopb {
667	status = "okay";
668};
669
670&vopb_mmu {
671	status = "okay";
672};
673
674&vopl {
675	status = "okay";
676};
677
678&vopl_mmu {
679	status = "okay";
680};
681