xref: /linux/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts (revision 24bce201d79807b668bf9d9e0aca801c5c0d5f78)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
4 */
5
6/dts-v1/;
7
8#include "dt-bindings/pwm/pwm.h"
9#include "dt-bindings/input/input.h"
10#include <dt-bindings/interrupt-controller/irq.h>
11#include "dt-bindings/usb/pd.h"
12#include "rk3399.dtsi"
13#include "rk3399-opp.dtsi"
14
15/ {
16	model = "Orange Pi RK3399 Board";
17	compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
18
19	aliases {
20		mmc0 = &sdio0;
21		mmc1 = &sdmmc;
22		mmc2 = &sdhci;
23	};
24
25	chosen {
26		stdout-path = "serial2:1500000n8";
27	};
28
29	clkin_gmac: external-gmac-clock {
30		compatible = "fixed-clock";
31		clock-frequency = <125000000>;
32		clock-output-names = "clkin_gmac";
33		#clock-cells = <0>;
34	};
35
36	adc-keys {
37		compatible = "adc-keys";
38		io-channels = <&saradc 1>;
39		io-channel-names = "buttons";
40		keyup-threshold-microvolt = <1800000>;
41		poll-interval = <100>;
42
43		button-up {
44			label = "Volume Up";
45			linux,code = <KEY_VOLUMEUP>;
46			press-threshold-microvolt = <100000>;
47		};
48
49		button-down {
50			label = "Volume Down";
51			linux,code = <KEY_VOLUMEDOWN>;
52			press-threshold-microvolt = <300000>;
53		};
54
55		back {
56			label = "Back";
57			linux,code = <KEY_BACK>;
58			press-threshold-microvolt = <985000>;
59		};
60
61		menu {
62			label = "Menu";
63			linux,code = <KEY_MENU>;
64			press-threshold-microvolt = <1314000>;
65		};
66	};
67
68	dc_12v: dc-12v {
69		compatible = "regulator-fixed";
70		regulator-name = "dc_12v";
71		regulator-always-on;
72		regulator-boot-on;
73		regulator-min-microvolt = <12000000>;
74		regulator-max-microvolt = <12000000>;
75	};
76
77	keys: gpio-keys {
78		compatible = "gpio-keys";
79		autorepeat;
80
81		power {
82			debounce-interval = <100>;
83			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
84			label = "GPIO Power";
85			linux,code = <KEY_POWER>;
86			linux,input-type = <1>;
87			pinctrl-names = "default";
88			pinctrl-0 = <&pwr_btn>;
89			wakeup-source;
90		};
91	};
92
93	sdio_pwrseq: sdio-pwrseq {
94		compatible = "mmc-pwrseq-simple";
95		clocks = <&rk808 1>;
96		clock-names = "ext_clock";
97		pinctrl-names = "default";
98		pinctrl-0 = <&wifi_reg_on_h>;
99		reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
100	};
101
102	/* switched by pmic_sleep */
103	vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
104		compatible = "regulator-fixed";
105		regulator-name = "vcc1v8_s3";
106		regulator-always-on;
107		regulator-boot-on;
108		regulator-min-microvolt = <1800000>;
109		regulator-max-microvolt = <1800000>;
110		vin-supply = <&vcc_1v8>;
111	};
112
113	vcc3v0_sd: vcc3v0-sd {
114		compatible = "regulator-fixed";
115		enable-active-high;
116		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
117		pinctrl-names = "default";
118		pinctrl-0 = <&sdmmc0_pwr_h>;
119		regulator-boot-on;
120		regulator-max-microvolt = <3000000>;
121		regulator-min-microvolt = <3000000>;
122		regulator-name = "vcc3v0_sd";
123		vin-supply = <&vcc3v3_sys>;
124	};
125
126	vcc3v3_sys: vcc3v3-sys {
127		compatible = "regulator-fixed";
128		regulator-name = "vcc3v3_sys";
129		regulator-always-on;
130		regulator-boot-on;
131		regulator-min-microvolt = <3300000>;
132		regulator-max-microvolt = <3300000>;
133		vin-supply = <&vcc_sys>;
134	};
135
136	vcc5v0_host: vcc5v0-host-regulator {
137		compatible = "regulator-fixed";
138		enable-active-high;
139		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
140		pinctrl-names = "default";
141		pinctrl-0 = <&vcc5v0_host_en>;
142		regulator-name = "vcc5v0_host";
143		regulator-always-on;
144		vin-supply = <&vcc_sys>;
145	};
146
147	vbus_typec: vbus-typec-regulator {
148		compatible = "regulator-fixed";
149		enable-active-high;
150		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
151		pinctrl-names = "default";
152		pinctrl-0 = <&vcc5v0_typec_en>;
153		regulator-name = "vbus_typec";
154		vin-supply = <&vcc_sys>;
155	};
156
157	vcc_sys: vcc-sys {
158		compatible = "regulator-fixed";
159		regulator-name = "vcc_sys";
160		regulator-always-on;
161		regulator-boot-on;
162		regulator-min-microvolt = <5000000>;
163		regulator-max-microvolt = <5000000>;
164		vin-supply = <&dc_12v>;
165	};
166
167	vdd_log: vdd-log {
168		compatible = "pwm-regulator";
169		pwms = <&pwm2 0 25000 1>;
170		pwm-supply = <&vcc_sys>;
171		regulator-name = "vdd_log";
172		regulator-always-on;
173		regulator-boot-on;
174		regulator-min-microvolt = <800000>;
175		regulator-max-microvolt = <1400000>;
176	};
177};
178
179&cpu_l0 {
180	cpu-supply = <&vdd_cpu_l>;
181};
182
183&cpu_l1 {
184	cpu-supply = <&vdd_cpu_l>;
185};
186
187&cpu_l2 {
188	cpu-supply = <&vdd_cpu_l>;
189};
190
191&cpu_l3 {
192	cpu-supply = <&vdd_cpu_l>;
193};
194
195&cpu_b0 {
196	cpu-supply = <&vdd_cpu_b>;
197};
198
199&cpu_b1 {
200	cpu-supply = <&vdd_cpu_b>;
201};
202
203&emmc_phy {
204	status = "okay";
205};
206
207&gmac {
208	assigned-clocks = <&cru SCLK_RMII_SRC>;
209	assigned-clock-parents = <&clkin_gmac>;
210	clock_in_out = "input";
211	phy-supply = <&vcc3v3_s3>;
212	phy-mode = "rgmii";
213	phy-handle = <&rtl8211e>;
214	pinctrl-names = "default";
215	pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
216	tx_delay = <0x28>;
217	rx_delay = <0x11>;
218	status = "okay";
219
220	mdio {
221		compatible = "snps,dwmac-mdio";
222		#address-cells = <1>;
223		#size-cells = <0>;
224
225		rtl8211e: ethernet-phy@1 {
226			reg = <1>;
227			interrupt-parent = <&gpio3>;
228			interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
229			reset-assert-us = <10000>;
230			reset-deassert-us = <30000>;
231			reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
232		};
233	};
234};
235
236&gpu {
237	mali-supply = <&vdd_gpu>;
238	status = "okay";
239};
240
241&hdmi {
242	ddc-i2c-bus = <&i2c3>;
243	status = "okay";
244};
245
246&hdmi_sound {
247	status = "okay";
248};
249
250&i2c0 {
251	clock-frequency = <400000>;
252	i2c-scl-rising-time-ns = <168>;
253	i2c-scl-falling-time-ns = <4>;
254	status = "okay";
255
256	rk808: pmic@1b {
257		compatible = "rockchip,rk808";
258		reg = <0x1b>;
259		interrupt-parent = <&gpio1>;
260		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
261		#clock-cells = <1>;
262		clock-output-names = "rtc_clko_soc", "rtc_clko_wifi";
263		pinctrl-names = "default";
264		pinctrl-0 = <&pmic_int_l>;
265		rockchip,system-power-controller;
266		wakeup-source;
267
268		vcc1-supply = <&vcc3v3_sys>;
269		vcc2-supply = <&vcc3v3_sys>;
270		vcc3-supply = <&vcc3v3_sys>;
271		vcc4-supply = <&vcc3v3_sys>;
272		vcc6-supply = <&vcc3v3_sys>;
273		vcc7-supply = <&vcc3v3_sys>;
274		vcc8-supply = <&vcc3v3_sys>;
275		vcc9-supply = <&vcc3v3_sys>;
276		vcc10-supply = <&vcc3v3_sys>;
277		vcc11-supply = <&vcc3v3_sys>;
278		vcc12-supply = <&vcc3v3_sys>;
279		vddio-supply = <&vcc_3v0>;
280
281		regulators {
282			vdd_center: DCDC_REG1 {
283				regulator-name = "vdd_center";
284				regulator-always-on;
285				regulator-boot-on;
286				regulator-min-microvolt = <700000>;
287				regulator-max-microvolt = <1500000>;
288				regulator-ramp-delay = <6001>;
289				regulator-state-mem {
290					regulator-off-in-suspend;
291				};
292			};
293
294			vdd_cpu_l: DCDC_REG2 {
295				regulator-name = "vdd_cpu_l";
296				regulator-always-on;
297				regulator-boot-on;
298				regulator-min-microvolt = <700000>;
299				regulator-max-microvolt = <1500000>;
300				regulator-ramp-delay = <6001>;
301				regulator-state-mem {
302					regulator-off-in-suspend;
303				};
304			};
305
306			vcc_ddr: DCDC_REG3 {
307				regulator-name = "vcc_ddr";
308				regulator-always-on;
309				regulator-boot-on;
310				regulator-state-mem {
311					regulator-on-in-suspend;
312				};
313			};
314
315			vcc_1v8: DCDC_REG4 {
316				regulator-name = "vcc_1v8";
317				regulator-always-on;
318				regulator-boot-on;
319				regulator-min-microvolt = <1800000>;
320				regulator-max-microvolt = <3300000>;
321				regulator-state-mem {
322					regulator-on-in-suspend;
323					regulator-suspend-microvolt = <1800000>;
324				};
325			};
326
327			vcc1v8_dvp: LDO_REG1 {
328				regulator-name = "vcc1v8_dvp";
329				regulator-always-on;
330				regulator-boot-on;
331				regulator-min-microvolt = <1800000>;
332				regulator-max-microvolt = <3400000>;
333				regulator-state-mem {
334					regulator-off-in-suspend;
335				};
336			};
337
338			vcc3v0_tp: LDO_REG2 {
339				regulator-name = "vcc3v0_tp";
340				regulator-always-on;
341				regulator-boot-on;
342				regulator-min-microvolt = <1800000>;
343				regulator-max-microvolt = <3400000>;
344				regulator-state-mem {
345					regulator-off-in-suspend;
346				};
347			};
348
349			vcc1v8_pmupll: LDO_REG3 {
350				regulator-name = "vcc1v8_pmupll";
351				regulator-always-on;
352				regulator-boot-on;
353				regulator-min-microvolt = <800000>;
354				regulator-max-microvolt = <2500000>;
355				regulator-state-mem {
356					regulator-on-in-suspend;
357					regulator-suspend-microvolt = <1800000>;
358				};
359			};
360
361			vcc_sdio: LDO_REG4 {
362				regulator-name = "vcc_sdio";
363				regulator-always-on;
364				regulator-boot-on;
365				regulator-min-microvolt = <1800000>;
366				regulator-max-microvolt = <3400000>;
367				regulator-state-mem {
368					regulator-on-in-suspend;
369					regulator-suspend-microvolt = <3000000>;
370				};
371			};
372
373			vcca3v0_codec: LDO_REG5 {
374				regulator-name = "vcca3v0_codec";
375				regulator-always-on;
376				regulator-boot-on;
377				regulator-min-microvolt = <1800000>;
378				regulator-max-microvolt = <3400000>;
379				regulator-state-mem {
380					regulator-off-in-suspend;
381				};
382			};
383
384			vcc_1v5: LDO_REG6 {
385				regulator-name = "vcc_1v5";
386				regulator-always-on;
387				regulator-boot-on;
388				regulator-min-microvolt = <800000>;
389				regulator-max-microvolt = <2500000>;
390				regulator-state-mem {
391					regulator-on-in-suspend;
392					regulator-suspend-microvolt = <1500000>;
393				};
394			};
395
396			vcca1v8_codec: LDO_REG7 {
397				regulator-name = "vcca1v8_codec";
398				regulator-always-on;
399				regulator-boot-on;
400				regulator-min-microvolt = <800000>;
401				regulator-max-microvolt = <2500000>;
402				regulator-state-mem {
403					regulator-off-in-suspend;
404				};
405			};
406
407			vcc_3v0: LDO_REG8 {
408				regulator-name = "vcc_3v0";
409				regulator-always-on;
410				regulator-boot-on;
411				regulator-min-microvolt = <1800000>;
412				regulator-max-microvolt = <3400000>;
413				regulator-state-mem {
414					regulator-on-in-suspend;
415					regulator-suspend-microvolt = <3000000>;
416				};
417			};
418
419			vcc3v3_s3: SWITCH_REG1 {
420				regulator-name = "vcc3v3_s3";
421				regulator-always-on;
422				regulator-boot-on;
423				regulator-state-mem {
424					regulator-off-in-suspend;
425				};
426			};
427
428			vcc3v3_s0: SWITCH_REG2 {
429				regulator-name = "vcc3v3_s0";
430				regulator-always-on;
431				regulator-boot-on;
432				regulator-state-mem {
433					regulator-off-in-suspend;
434				};
435			};
436		};
437	};
438
439	vdd_cpu_b: regulator@40 {
440		compatible = "silergy,syr827";
441		reg = <0x40>;
442		fcs,suspend-voltage-selector = <1>;
443		pinctrl-names = "default";
444		pinctrl-0 = <&cpu_b_sleep>;
445		regulator-name = "vdd_cpu_b";
446		regulator-min-microvolt = <712500>;
447		regulator-max-microvolt = <1500000>;
448		regulator-ramp-delay = <1000>;
449		regulator-always-on;
450		regulator-boot-on;
451		vin-supply = <&vcc3v3_sys>;
452
453		regulator-state-mem {
454			regulator-off-in-suspend;
455		};
456	};
457
458	vdd_gpu: regulator@41 {
459		compatible = "silergy,syr828";
460		reg = <0x41>;
461		fcs,suspend-voltage-selector = <1>;
462		pinctrl-names = "default";
463		pinctrl-0 = <&gpu_sleep>;
464		regulator-name = "vdd_gpu";
465		regulator-min-microvolt = <712500>;
466		regulator-max-microvolt = <1500000>;
467		regulator-ramp-delay = <1000>;
468		regulator-always-on;
469		regulator-boot-on;
470		vin-supply = <&vcc3v3_sys>;
471
472		regulator-state-mem {
473			regulator-off-in-suspend;
474		};
475	};
476};
477
478&i2c1 {
479	i2c-scl-rising-time-ns = <450>;
480	i2c-scl-falling-time-ns = <15>;
481	status = "okay";
482};
483
484&i2c3 {
485	i2c-scl-rising-time-ns = <450>;
486	i2c-scl-falling-time-ns = <15>;
487	status = "okay";
488};
489
490&i2c4 {
491	clock-frequency = <400000>;
492	i2c-scl-rising-time-ns = <450>;
493	i2c-scl-falling-time-ns = <15>;
494	status = "okay";
495
496	ak09911@c {
497		compatible = "asahi-kasei,ak09911";
498		reg = <0x0c>;
499		vdd-supply = <&vcc3v3_s3>;
500		vid-supply = <&vcc3v3_s3>;
501	};
502
503	mpu6500@68 {
504		compatible = "invensense,mpu6500";
505		reg = <0x68>;
506		interrupt-parent = <&gpio1>;
507		interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
508		pinctrl-names = "default";
509		pinctrl-0 = <&gsensor_int_l>;
510		vddio-supply = <&vcc3v3_s3>;
511	};
512
513	lsm6ds3@6a {
514		compatible = "st,lsm6ds3";
515		reg = <0x6a>;
516		interrupt-parent = <&gpio1>;
517		interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
518		pinctrl-names = "default";
519		pinctrl-0 = <&gyr_int_l>;
520		vdd-supply = <&vcc3v3_s3>;
521		vddio-supply = <&vcc3v3_s3>;
522	};
523
524	cm32181@10 {
525		compatible = "capella,cm32181";
526		reg = <0x10>;
527		interrupt-parent = <&gpio4>;
528		interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
529		pinctrl-names = "default";
530		pinctrl-0 = <&light_int_l>;
531		vdd-supply = <&vcc3v3_s3>;
532	};
533
534	fusb302@22 {
535		compatible = "fcs,fusb302";
536		reg = <0x22>;
537		interrupt-parent = <&gpio1>;
538		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
539		pinctrl-names = "default";
540		pinctrl-0 = <&chg_cc_int_l>;
541		vbus-supply = <&vbus_typec>;
542
543		typec_con: connector {
544			compatible = "usb-c-connector";
545			data-role = "host";
546			label = "USB-C";
547			op-sink-microwatt = <1000000>;
548			power-role = "dual";
549			sink-pdos =
550				<PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
551			source-pdos =
552				<PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
553			try-power-role = "sink";
554
555			ports {
556				#address-cells = <1>;
557				#size-cells = <0>;
558
559				port@0 {
560					reg = <0>;
561					typec_hs: endpoint {
562						remote-endpoint = <&u2phy0_typec_hs>;
563					};
564				};
565				port@1 {
566					reg = <1>;
567					typec_ss: endpoint {
568						remote-endpoint = <&tcphy0_typec_ss>;
569					};
570				};
571				port@2 {
572					reg = <2>;
573					typec_dp: endpoint {
574						remote-endpoint = <&tcphy0_typec_dp>;
575					};
576				};
577			};
578		};
579	};
580};
581
582&io_domains {
583	status = "okay";
584	bt656-supply = <&vcc_3v0>;
585	audio-supply = <&vcca1v8_codec>;
586	sdmmc-supply = <&vcc_sdio>;
587	gpio1830-supply = <&vcc_3v0>;
588};
589
590&pmu_io_domains {
591	status = "okay";
592	pmu1830-supply = <&vcc_3v0>;
593};
594
595&pinctrl {
596	buttons {
597		pwr_btn: pwr-btn {
598			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
599		};
600	};
601
602	gmac {
603		phy_intb: phy-intb {
604			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
605		};
606
607		phy_rstb: phy-rstb {
608			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
609		};
610	};
611
612	pmic {
613		cpu_b_sleep: cpu-b-sleep {
614			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
615		};
616
617		gpu_sleep: gpu-sleep {
618			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
619		};
620
621		pmic_int_l: pmic-int-l {
622			rockchip,pins =
623				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
624		};
625	};
626
627	sd {
628		sdmmc0_pwr_h: sdmmc0-pwr-h {
629			rockchip,pins =
630				<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
631		};
632	};
633
634	usb2 {
635		vcc5v0_host_en: vcc5v0-host-en {
636			rockchip,pins =
637				<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
638		};
639
640		vcc5v0_typec_en: vcc5v0-typec-en {
641			rockchip,pins =
642				<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
643		};
644	};
645
646	sdio-pwrseq {
647		wifi_reg_on_h: wifi-reg-on-h {
648			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
649		};
650	};
651
652	wifi {
653		wifi_host_wake_l: wifi-host-wake-l {
654			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
655		};
656	};
657
658	bluetooth {
659		bt_reg_on_h: bt-enable-h {
660			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
661		};
662
663		bt_host_wake_l: bt-host-wake-l {
664			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
665		};
666
667		bt_wake_l: bt-wake-l {
668			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
669		};
670	};
671
672	mpu6500 {
673		gsensor_int_l: gsensor-int-l {
674			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
675		};
676	};
677
678	lsm6ds3 {
679		gyr_int_l: gyr-int-l {
680			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
681		};
682	};
683
684	cm32181 {
685		light_int_l: light-int-l {
686			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
687		};
688	};
689
690	fusb302 {
691		chg_cc_int_l: chg-cc-int-l {
692			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
693		};
694	};
695};
696
697&pwm0 {
698	status = "okay";
699};
700
701&pwm2 {
702	status = "okay";
703};
704
705&saradc {
706	vref-supply = <&vcca1v8_s3>;
707	status = "okay";
708};
709
710&sdhci {
711	bus-width = <8>;
712	mmc-hs400-1_8v;
713	mmc-hs400-enhanced-strobe;
714	non-removable;
715	status = "okay";
716};
717
718&sdio0 {
719	bus-width = <4>;
720	cap-sd-highspeed;
721	cap-sdio-irq;
722	clock-frequency = <50000000>;
723	disable-wp;
724	keep-power-in-suspend;
725	max-frequency = <50000000>;
726	mmc-pwrseq = <&sdio_pwrseq>;
727	non-removable;
728	pinctrl-names = "default";
729	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
730	sd-uhs-sdr104;
731	#address-cells = <1>;
732	#size-cells = <0>;
733	status = "okay";
734
735	brcmf: wifi@1 {
736		reg = <1>;
737		compatible = "brcm,bcm4329-fmac";
738		interrupt-parent = <&gpio0>;
739		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
740		interrupt-names = "host-wake";
741		pinctrl-names = "default";
742		pinctrl-0 = <&wifi_host_wake_l>;
743	};
744};
745
746&sdmmc {
747	bus-width = <4>;
748	cap-mmc-highspeed;
749	cap-sd-highspeed;
750	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
751	clock-frequency = <150000000>;
752	disable-wp;
753	max-frequency = <150000000>;
754	pinctrl-names = "default";
755	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
756	vmmc-supply = <&vcc3v0_sd>;
757	vqmmc-supply = <&vcc_sdio>;
758	status = "okay";
759};
760
761&tcphy0 {
762	status = "okay";
763};
764
765&tcphy0_dp {
766	port {
767		tcphy0_typec_dp: endpoint {
768			remote-endpoint = <&typec_dp>;
769		};
770	};
771};
772
773&tcphy0_usb3 {
774	port {
775		tcphy0_typec_ss: endpoint {
776			remote-endpoint = <&typec_ss>;
777		};
778	};
779};
780
781&tcphy1 {
782	status = "okay";
783};
784
785&tsadc {
786	rockchip,hw-tshut-mode = <1>;
787	rockchip,hw-tshut-polarity = <1>;
788	status = "okay";
789};
790
791&u2phy0 {
792	status = "okay";
793
794	u2phy0_otg: otg-port {
795		phy-supply = <&vbus_typec>;
796		status = "okay";
797	};
798
799	u2phy0_host: host-port {
800		phy-supply = <&vcc5v0_host>;
801		status = "okay";
802	};
803
804	port {
805		u2phy0_typec_hs: endpoint {
806			remote-endpoint = <&typec_hs>;
807		};
808	};
809};
810
811&u2phy1 {
812	status = "okay";
813
814	u2phy1_otg: otg-port {
815		status = "okay";
816	};
817
818	u2phy1_host: host-port {
819		phy-supply = <&vcc5v0_host>;
820		status = "okay";
821	};
822};
823
824&uart0 {
825	pinctrl-names = "default";
826	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
827	status = "okay";
828
829	bluetooth {
830		compatible = "brcm,bcm43438-bt";
831		clocks = <&rk808 1>;
832		clock-names = "lpo";
833		device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
834		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
835		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
836		pinctrl-names = "default";
837		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
838		vbat-supply = <&vcc3v3_sys>;
839		vddio-supply = <&vcc_1v8>;
840	};
841};
842
843&uart2 {
844	status = "okay";
845};
846
847&usb_host0_ehci {
848	status = "okay";
849};
850
851&usb_host0_ohci {
852	status = "okay";
853};
854
855&usb_host1_ehci {
856	status = "okay";
857};
858
859&usb_host1_ohci {
860	status = "okay";
861};
862
863&usbdrd3_0 {
864	status = "okay";
865};
866
867&usbdrd_dwc3_0 {
868	status = "okay";
869	dr_mode = "host";
870};
871
872&usbdrd3_1 {
873	status = "okay";
874};
875
876&usbdrd_dwc3_1 {
877	status = "okay";
878	dr_mode = "host";
879};
880
881&vopb {
882	status = "okay";
883};
884
885&vopb_mmu {
886	status = "okay";
887};
888
889&vopl {
890	status = "okay";
891};
892
893&vopl_mmu {
894	status = "okay";
895};
896