1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. 4 */ 5 6/dts-v1/; 7 8#include "dt-bindings/pwm/pwm.h" 9#include "dt-bindings/input/input.h" 10#include <dt-bindings/interrupt-controller/irq.h> 11#include "dt-bindings/usb/pd.h" 12#include "rk3399.dtsi" 13#include "rk3399-opp.dtsi" 14 15/ { 16 model = "Orange Pi RK3399 Board"; 17 compatible = "xunlong,rk3399-orangepi", "rockchip,rk3399"; 18 19 aliases { 20 ethernet0 = &gmac; 21 mmc0 = &sdio0; 22 mmc1 = &sdmmc; 23 mmc2 = &sdhci; 24 }; 25 26 chosen { 27 stdout-path = "serial2:1500000n8"; 28 }; 29 30 clkin_gmac: external-gmac-clock { 31 compatible = "fixed-clock"; 32 clock-frequency = <125000000>; 33 clock-output-names = "clkin_gmac"; 34 #clock-cells = <0>; 35 }; 36 37 adc-keys { 38 compatible = "adc-keys"; 39 io-channels = <&saradc 1>; 40 io-channel-names = "buttons"; 41 keyup-threshold-microvolt = <1800000>; 42 poll-interval = <100>; 43 44 button-up { 45 label = "Volume Up"; 46 linux,code = <KEY_VOLUMEUP>; 47 press-threshold-microvolt = <100000>; 48 }; 49 50 button-down { 51 label = "Volume Down"; 52 linux,code = <KEY_VOLUMEDOWN>; 53 press-threshold-microvolt = <300000>; 54 }; 55 56 button-back { 57 label = "Back"; 58 linux,code = <KEY_BACK>; 59 press-threshold-microvolt = <985000>; 60 }; 61 62 button-menu { 63 label = "Menu"; 64 linux,code = <KEY_MENU>; 65 press-threshold-microvolt = <1314000>; 66 }; 67 }; 68 69 dc_12v: dc-12v { 70 compatible = "regulator-fixed"; 71 regulator-name = "dc_12v"; 72 regulator-always-on; 73 regulator-boot-on; 74 regulator-min-microvolt = <12000000>; 75 regulator-max-microvolt = <12000000>; 76 }; 77 78 keys: gpio-keys { 79 compatible = "gpio-keys"; 80 autorepeat; 81 82 key-power { 83 debounce-interval = <100>; 84 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; 85 label = "GPIO Power"; 86 linux,code = <KEY_POWER>; 87 linux,input-type = <1>; 88 pinctrl-names = "default"; 89 pinctrl-0 = <&pwr_btn>; 90 wakeup-source; 91 }; 92 }; 93 94 sdio_pwrseq: sdio-pwrseq { 95 compatible = "mmc-pwrseq-simple"; 96 clocks = <&rk808 1>; 97 clock-names = "ext_clock"; 98 pinctrl-names = "default"; 99 pinctrl-0 = <&wifi_reg_on_h>; 100 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; 101 }; 102 103 /* switched by pmic_sleep */ 104 vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { 105 compatible = "regulator-fixed"; 106 regulator-name = "vcc1v8_s3"; 107 regulator-always-on; 108 regulator-boot-on; 109 regulator-min-microvolt = <1800000>; 110 regulator-max-microvolt = <1800000>; 111 vin-supply = <&vcc_1v8>; 112 }; 113 114 vcc3v0_sd: vcc3v0-sd { 115 compatible = "regulator-fixed"; 116 enable-active-high; 117 gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; 118 pinctrl-names = "default"; 119 pinctrl-0 = <&sdmmc0_pwr_h>; 120 regulator-boot-on; 121 regulator-max-microvolt = <3000000>; 122 regulator-min-microvolt = <3000000>; 123 regulator-name = "vcc3v0_sd"; 124 vin-supply = <&vcc3v3_sys>; 125 }; 126 127 vcc3v3_sys: vcc3v3-sys { 128 compatible = "regulator-fixed"; 129 regulator-name = "vcc3v3_sys"; 130 regulator-always-on; 131 regulator-boot-on; 132 regulator-min-microvolt = <3300000>; 133 regulator-max-microvolt = <3300000>; 134 vin-supply = <&vcc_sys>; 135 }; 136 137 vcc5v0_host: vcc5v0-host-regulator { 138 compatible = "regulator-fixed"; 139 enable-active-high; 140 gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; 141 pinctrl-names = "default"; 142 pinctrl-0 = <&vcc5v0_host_en>; 143 regulator-name = "vcc5v0_host"; 144 regulator-always-on; 145 vin-supply = <&vcc_sys>; 146 }; 147 148 vbus_typec: vbus-typec-regulator { 149 compatible = "regulator-fixed"; 150 enable-active-high; 151 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; 152 pinctrl-names = "default"; 153 pinctrl-0 = <&vcc5v0_typec_en>; 154 regulator-name = "vbus_typec"; 155 vin-supply = <&vcc_sys>; 156 }; 157 158 vcc_sys: vcc-sys { 159 compatible = "regulator-fixed"; 160 regulator-name = "vcc_sys"; 161 regulator-always-on; 162 regulator-boot-on; 163 regulator-min-microvolt = <5000000>; 164 regulator-max-microvolt = <5000000>; 165 vin-supply = <&dc_12v>; 166 }; 167 168 vdd_log: vdd-log { 169 compatible = "pwm-regulator"; 170 pwms = <&pwm2 0 25000 1>; 171 pwm-supply = <&vcc_sys>; 172 regulator-name = "vdd_log"; 173 regulator-always-on; 174 regulator-boot-on; 175 regulator-min-microvolt = <800000>; 176 regulator-max-microvolt = <1400000>; 177 }; 178}; 179 180&cpu_l0 { 181 cpu-supply = <&vdd_cpu_l>; 182}; 183 184&cpu_l1 { 185 cpu-supply = <&vdd_cpu_l>; 186}; 187 188&cpu_l2 { 189 cpu-supply = <&vdd_cpu_l>; 190}; 191 192&cpu_l3 { 193 cpu-supply = <&vdd_cpu_l>; 194}; 195 196&cpu_b0 { 197 cpu-supply = <&vdd_cpu_b>; 198}; 199 200&cpu_b1 { 201 cpu-supply = <&vdd_cpu_b>; 202}; 203 204&emmc_phy { 205 status = "okay"; 206}; 207 208&gmac { 209 assigned-clocks = <&cru SCLK_RMII_SRC>; 210 assigned-clock-parents = <&clkin_gmac>; 211 clock_in_out = "input"; 212 phy-supply = <&vcc3v3_s3>; 213 phy-mode = "rgmii"; 214 phy-handle = <&rtl8211e>; 215 pinctrl-names = "default"; 216 pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>; 217 tx_delay = <0x28>; 218 rx_delay = <0x11>; 219 status = "okay"; 220 221 mdio { 222 compatible = "snps,dwmac-mdio"; 223 #address-cells = <1>; 224 #size-cells = <0>; 225 226 rtl8211e: ethernet-phy@1 { 227 reg = <1>; 228 interrupt-parent = <&gpio3>; 229 interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; 230 reset-assert-us = <10000>; 231 reset-deassert-us = <30000>; 232 reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; 233 }; 234 }; 235}; 236 237&gpu { 238 mali-supply = <&vdd_gpu>; 239 status = "okay"; 240}; 241 242&hdmi { 243 ddc-i2c-bus = <&i2c3>; 244 status = "okay"; 245}; 246 247&hdmi_sound { 248 status = "okay"; 249}; 250 251&i2c0 { 252 clock-frequency = <400000>; 253 i2c-scl-rising-time-ns = <168>; 254 i2c-scl-falling-time-ns = <4>; 255 status = "okay"; 256 257 rk808: pmic@1b { 258 compatible = "rockchip,rk808"; 259 reg = <0x1b>; 260 interrupt-parent = <&gpio1>; 261 interrupts = <21 IRQ_TYPE_LEVEL_LOW>; 262 #clock-cells = <1>; 263 clock-output-names = "rtc_clko_soc", "rtc_clko_wifi"; 264 pinctrl-names = "default"; 265 pinctrl-0 = <&pmic_int_l>; 266 rockchip,system-power-controller; 267 wakeup-source; 268 269 vcc1-supply = <&vcc3v3_sys>; 270 vcc2-supply = <&vcc3v3_sys>; 271 vcc3-supply = <&vcc3v3_sys>; 272 vcc4-supply = <&vcc3v3_sys>; 273 vcc6-supply = <&vcc3v3_sys>; 274 vcc7-supply = <&vcc3v3_sys>; 275 vcc8-supply = <&vcc3v3_sys>; 276 vcc9-supply = <&vcc3v3_sys>; 277 vcc10-supply = <&vcc3v3_sys>; 278 vcc11-supply = <&vcc3v3_sys>; 279 vcc12-supply = <&vcc3v3_sys>; 280 vddio-supply = <&vcc_3v0>; 281 282 regulators { 283 vdd_center: DCDC_REG1 { 284 regulator-name = "vdd_center"; 285 regulator-always-on; 286 regulator-boot-on; 287 regulator-min-microvolt = <700000>; 288 regulator-max-microvolt = <1500000>; 289 regulator-ramp-delay = <6001>; 290 regulator-state-mem { 291 regulator-off-in-suspend; 292 }; 293 }; 294 295 vdd_cpu_l: DCDC_REG2 { 296 regulator-name = "vdd_cpu_l"; 297 regulator-always-on; 298 regulator-boot-on; 299 regulator-min-microvolt = <700000>; 300 regulator-max-microvolt = <1500000>; 301 regulator-ramp-delay = <6001>; 302 regulator-state-mem { 303 regulator-off-in-suspend; 304 }; 305 }; 306 307 vcc_ddr: DCDC_REG3 { 308 regulator-name = "vcc_ddr"; 309 regulator-always-on; 310 regulator-boot-on; 311 regulator-state-mem { 312 regulator-on-in-suspend; 313 }; 314 }; 315 316 vcc_1v8: DCDC_REG4 { 317 regulator-name = "vcc_1v8"; 318 regulator-always-on; 319 regulator-boot-on; 320 regulator-min-microvolt = <1800000>; 321 regulator-max-microvolt = <3300000>; 322 regulator-state-mem { 323 regulator-on-in-suspend; 324 regulator-suspend-microvolt = <1800000>; 325 }; 326 }; 327 328 vcc1v8_dvp: LDO_REG1 { 329 regulator-name = "vcc1v8_dvp"; 330 regulator-always-on; 331 regulator-boot-on; 332 regulator-min-microvolt = <1800000>; 333 regulator-max-microvolt = <3400000>; 334 regulator-state-mem { 335 regulator-off-in-suspend; 336 }; 337 }; 338 339 vcc3v0_tp: LDO_REG2 { 340 regulator-name = "vcc3v0_tp"; 341 regulator-always-on; 342 regulator-boot-on; 343 regulator-min-microvolt = <1800000>; 344 regulator-max-microvolt = <3400000>; 345 regulator-state-mem { 346 regulator-off-in-suspend; 347 }; 348 }; 349 350 vcc1v8_pmupll: LDO_REG3 { 351 regulator-name = "vcc1v8_pmupll"; 352 regulator-always-on; 353 regulator-boot-on; 354 regulator-min-microvolt = <800000>; 355 regulator-max-microvolt = <2500000>; 356 regulator-state-mem { 357 regulator-on-in-suspend; 358 regulator-suspend-microvolt = <1800000>; 359 }; 360 }; 361 362 vcc_sdio: LDO_REG4 { 363 regulator-name = "vcc_sdio"; 364 regulator-always-on; 365 regulator-boot-on; 366 regulator-min-microvolt = <1800000>; 367 regulator-max-microvolt = <3400000>; 368 regulator-state-mem { 369 regulator-on-in-suspend; 370 regulator-suspend-microvolt = <3000000>; 371 }; 372 }; 373 374 vcca3v0_codec: LDO_REG5 { 375 regulator-name = "vcca3v0_codec"; 376 regulator-always-on; 377 regulator-boot-on; 378 regulator-min-microvolt = <1800000>; 379 regulator-max-microvolt = <3400000>; 380 regulator-state-mem { 381 regulator-off-in-suspend; 382 }; 383 }; 384 385 vcc_1v5: LDO_REG6 { 386 regulator-name = "vcc_1v5"; 387 regulator-always-on; 388 regulator-boot-on; 389 regulator-min-microvolt = <800000>; 390 regulator-max-microvolt = <2500000>; 391 regulator-state-mem { 392 regulator-on-in-suspend; 393 regulator-suspend-microvolt = <1500000>; 394 }; 395 }; 396 397 vcca1v8_codec: LDO_REG7 { 398 regulator-name = "vcca1v8_codec"; 399 regulator-always-on; 400 regulator-boot-on; 401 regulator-min-microvolt = <800000>; 402 regulator-max-microvolt = <2500000>; 403 regulator-state-mem { 404 regulator-off-in-suspend; 405 }; 406 }; 407 408 vcc_3v0: LDO_REG8 { 409 regulator-name = "vcc_3v0"; 410 regulator-always-on; 411 regulator-boot-on; 412 regulator-min-microvolt = <1800000>; 413 regulator-max-microvolt = <3400000>; 414 regulator-state-mem { 415 regulator-on-in-suspend; 416 regulator-suspend-microvolt = <3000000>; 417 }; 418 }; 419 420 vcc3v3_s3: SWITCH_REG1 { 421 regulator-name = "vcc3v3_s3"; 422 regulator-always-on; 423 regulator-boot-on; 424 regulator-state-mem { 425 regulator-off-in-suspend; 426 }; 427 }; 428 429 vcc3v3_s0: SWITCH_REG2 { 430 regulator-name = "vcc3v3_s0"; 431 regulator-always-on; 432 regulator-boot-on; 433 regulator-state-mem { 434 regulator-off-in-suspend; 435 }; 436 }; 437 }; 438 }; 439 440 vdd_cpu_b: regulator@40 { 441 compatible = "silergy,syr827"; 442 reg = <0x40>; 443 fcs,suspend-voltage-selector = <1>; 444 pinctrl-names = "default"; 445 pinctrl-0 = <&cpu_b_sleep>; 446 regulator-name = "vdd_cpu_b"; 447 regulator-min-microvolt = <712500>; 448 regulator-max-microvolt = <1500000>; 449 regulator-ramp-delay = <1000>; 450 regulator-always-on; 451 regulator-boot-on; 452 vin-supply = <&vcc3v3_sys>; 453 454 regulator-state-mem { 455 regulator-off-in-suspend; 456 }; 457 }; 458 459 vdd_gpu: regulator@41 { 460 compatible = "silergy,syr828"; 461 reg = <0x41>; 462 fcs,suspend-voltage-selector = <1>; 463 pinctrl-names = "default"; 464 pinctrl-0 = <&gpu_sleep>; 465 regulator-name = "vdd_gpu"; 466 regulator-min-microvolt = <712500>; 467 regulator-max-microvolt = <1500000>; 468 regulator-ramp-delay = <1000>; 469 regulator-always-on; 470 regulator-boot-on; 471 vin-supply = <&vcc3v3_sys>; 472 473 regulator-state-mem { 474 regulator-off-in-suspend; 475 }; 476 }; 477}; 478 479&i2c1 { 480 i2c-scl-rising-time-ns = <450>; 481 i2c-scl-falling-time-ns = <15>; 482 status = "okay"; 483}; 484 485&i2c3 { 486 i2c-scl-rising-time-ns = <450>; 487 i2c-scl-falling-time-ns = <15>; 488 status = "okay"; 489}; 490 491&i2c4 { 492 clock-frequency = <400000>; 493 i2c-scl-rising-time-ns = <450>; 494 i2c-scl-falling-time-ns = <15>; 495 status = "okay"; 496 497 ak09911@c { 498 compatible = "asahi-kasei,ak09911"; 499 reg = <0x0c>; 500 vdd-supply = <&vcc3v3_s3>; 501 vid-supply = <&vcc3v3_s3>; 502 }; 503 504 mpu6500@68 { 505 compatible = "invensense,mpu6500"; 506 reg = <0x68>; 507 interrupt-parent = <&gpio1>; 508 interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>; 509 pinctrl-names = "default"; 510 pinctrl-0 = <&gsensor_int_l>; 511 vddio-supply = <&vcc3v3_s3>; 512 }; 513 514 lsm6ds3@6a { 515 compatible = "st,lsm6ds3"; 516 reg = <0x6a>; 517 interrupt-parent = <&gpio1>; 518 interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>; 519 pinctrl-names = "default"; 520 pinctrl-0 = <&gyr_int_l>; 521 vdd-supply = <&vcc3v3_s3>; 522 vddio-supply = <&vcc3v3_s3>; 523 }; 524 525 cm32181@10 { 526 compatible = "capella,cm32181"; 527 reg = <0x10>; 528 interrupt-parent = <&gpio4>; 529 interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>; 530 pinctrl-names = "default"; 531 pinctrl-0 = <&light_int_l>; 532 vdd-supply = <&vcc3v3_s3>; 533 }; 534 535 fusb302@22 { 536 compatible = "fcs,fusb302"; 537 reg = <0x22>; 538 interrupt-parent = <&gpio1>; 539 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; 540 pinctrl-names = "default"; 541 pinctrl-0 = <&chg_cc_int_l>; 542 vbus-supply = <&vbus_typec>; 543 544 typec_con: connector { 545 compatible = "usb-c-connector"; 546 data-role = "host"; 547 label = "USB-C"; 548 op-sink-microwatt = <1000000>; 549 power-role = "dual"; 550 sink-pdos = 551 <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>; 552 source-pdos = 553 <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>; 554 try-power-role = "sink"; 555 556 ports { 557 #address-cells = <1>; 558 #size-cells = <0>; 559 560 port@0 { 561 reg = <0>; 562 typec_hs: endpoint { 563 remote-endpoint = <&u2phy0_typec_hs>; 564 }; 565 }; 566 port@1 { 567 reg = <1>; 568 typec_ss: endpoint { 569 remote-endpoint = <&tcphy0_typec_ss>; 570 }; 571 }; 572 port@2 { 573 reg = <2>; 574 typec_dp: endpoint { 575 remote-endpoint = <&tcphy0_typec_dp>; 576 }; 577 }; 578 }; 579 }; 580 }; 581}; 582 583&io_domains { 584 status = "okay"; 585 bt656-supply = <&vcc_3v0>; 586 audio-supply = <&vcca1v8_codec>; 587 sdmmc-supply = <&vcc_sdio>; 588 gpio1830-supply = <&vcc_3v0>; 589}; 590 591&pmu_io_domains { 592 status = "okay"; 593 pmu1830-supply = <&vcc_3v0>; 594}; 595 596&pinctrl { 597 buttons { 598 pwr_btn: pwr-btn { 599 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; 600 }; 601 }; 602 603 gmac { 604 phy_intb: phy-intb { 605 rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; 606 }; 607 608 phy_rstb: phy-rstb { 609 rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; 610 }; 611 }; 612 613 pmic { 614 cpu_b_sleep: cpu-b-sleep { 615 rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; 616 }; 617 618 gpu_sleep: gpu-sleep { 619 rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; 620 }; 621 622 pmic_int_l: pmic-int-l { 623 rockchip,pins = 624 <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; 625 }; 626 }; 627 628 sd { 629 sdmmc0_pwr_h: sdmmc0-pwr-h { 630 rockchip,pins = 631 <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; 632 }; 633 }; 634 635 usb2 { 636 vcc5v0_host_en: vcc5v0-host-en { 637 rockchip,pins = 638 <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; 639 }; 640 641 vcc5v0_typec_en: vcc5v0-typec-en { 642 rockchip,pins = 643 <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; 644 }; 645 }; 646 647 sdio-pwrseq { 648 wifi_reg_on_h: wifi-reg-on-h { 649 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; 650 }; 651 }; 652 653 wifi { 654 wifi_host_wake_l: wifi-host-wake-l { 655 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; 656 }; 657 }; 658 659 bluetooth { 660 bt_reg_on_h: bt-enable-h { 661 rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; 662 }; 663 664 bt_host_wake_l: bt-host-wake-l { 665 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; 666 }; 667 668 bt_wake_l: bt-wake-l { 669 rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; 670 }; 671 }; 672 673 mpu6500 { 674 gsensor_int_l: gsensor-int-l { 675 rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; 676 }; 677 }; 678 679 lsm6ds3 { 680 gyr_int_l: gyr-int-l { 681 rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; 682 }; 683 }; 684 685 cm32181 { 686 light_int_l: light-int-l { 687 rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; 688 }; 689 }; 690 691 fusb302 { 692 chg_cc_int_l: chg-cc-int-l { 693 rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; 694 }; 695 }; 696}; 697 698&pwm0 { 699 status = "okay"; 700}; 701 702&pwm2 { 703 status = "okay"; 704}; 705 706&saradc { 707 vref-supply = <&vcca1v8_s3>; 708 status = "okay"; 709}; 710 711&sdhci { 712 bus-width = <8>; 713 mmc-hs400-1_8v; 714 mmc-hs400-enhanced-strobe; 715 non-removable; 716 status = "okay"; 717}; 718 719&sdio0 { 720 bus-width = <4>; 721 cap-sd-highspeed; 722 cap-sdio-irq; 723 clock-frequency = <50000000>; 724 disable-wp; 725 keep-power-in-suspend; 726 max-frequency = <50000000>; 727 mmc-pwrseq = <&sdio_pwrseq>; 728 non-removable; 729 pinctrl-names = "default"; 730 pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; 731 sd-uhs-sdr104; 732 #address-cells = <1>; 733 #size-cells = <0>; 734 status = "okay"; 735 736 brcmf: wifi@1 { 737 reg = <1>; 738 compatible = "brcm,bcm4329-fmac"; 739 interrupt-parent = <&gpio0>; 740 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; 741 interrupt-names = "host-wake"; 742 pinctrl-names = "default"; 743 pinctrl-0 = <&wifi_host_wake_l>; 744 }; 745}; 746 747&sdmmc { 748 bus-width = <4>; 749 cap-mmc-highspeed; 750 cap-sd-highspeed; 751 cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; 752 clock-frequency = <150000000>; 753 disable-wp; 754 max-frequency = <150000000>; 755 pinctrl-names = "default"; 756 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; 757 vmmc-supply = <&vcc3v0_sd>; 758 vqmmc-supply = <&vcc_sdio>; 759 status = "okay"; 760}; 761 762&tcphy0 { 763 status = "okay"; 764}; 765 766&tcphy0_dp { 767 port { 768 tcphy0_typec_dp: endpoint { 769 remote-endpoint = <&typec_dp>; 770 }; 771 }; 772}; 773 774&tcphy0_usb3 { 775 port { 776 tcphy0_typec_ss: endpoint { 777 remote-endpoint = <&typec_ss>; 778 }; 779 }; 780}; 781 782&tcphy1 { 783 status = "okay"; 784}; 785 786&tsadc { 787 rockchip,hw-tshut-mode = <1>; 788 rockchip,hw-tshut-polarity = <1>; 789 status = "okay"; 790}; 791 792&u2phy0 { 793 status = "okay"; 794 795 u2phy0_otg: otg-port { 796 phy-supply = <&vbus_typec>; 797 status = "okay"; 798 }; 799 800 u2phy0_host: host-port { 801 phy-supply = <&vcc5v0_host>; 802 status = "okay"; 803 }; 804 805 port { 806 u2phy0_typec_hs: endpoint { 807 remote-endpoint = <&typec_hs>; 808 }; 809 }; 810}; 811 812&u2phy1 { 813 status = "okay"; 814 815 u2phy1_otg: otg-port { 816 status = "okay"; 817 }; 818 819 u2phy1_host: host-port { 820 phy-supply = <&vcc5v0_host>; 821 status = "okay"; 822 }; 823}; 824 825&uart0 { 826 pinctrl-names = "default"; 827 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; 828 status = "okay"; 829 830 bluetooth { 831 compatible = "brcm,bcm43438-bt"; 832 clocks = <&rk808 1>; 833 clock-names = "lpo"; 834 device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; 835 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; 836 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; 837 pinctrl-names = "default"; 838 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; 839 vbat-supply = <&vcc3v3_sys>; 840 vddio-supply = <&vcc_1v8>; 841 }; 842}; 843 844&uart2 { 845 status = "okay"; 846}; 847 848&usb_host0_ehci { 849 status = "okay"; 850}; 851 852&usb_host0_ohci { 853 status = "okay"; 854}; 855 856&usb_host1_ehci { 857 status = "okay"; 858}; 859 860&usb_host1_ohci { 861 status = "okay"; 862}; 863 864&usbdrd3_0 { 865 status = "okay"; 866}; 867 868&usbdrd_dwc3_0 { 869 status = "okay"; 870 dr_mode = "host"; 871}; 872 873&usbdrd3_1 { 874 status = "okay"; 875}; 876 877&usbdrd_dwc3_1 { 878 status = "okay"; 879 dr_mode = "host"; 880}; 881 882&vopb { 883 status = "okay"; 884}; 885 886&vopb_mmu { 887 status = "okay"; 888}; 889 890&vopl { 891 status = "okay"; 892}; 893 894&vopl_mmu { 895 status = "okay"; 896}; 897