1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. 4 * (https://www.khadas.com) 5 */ 6 7/dts-v1/; 8#include <dt-bindings/input/linux-event-codes.h> 9#include <dt-bindings/pwm/pwm.h> 10#include "rk3399.dtsi" 11#include "rk3399-opp.dtsi" 12 13/ { 14 aliases { 15 mmc0 = &sdio0; 16 mmc1 = &sdmmc; 17 mmc2 = &sdhci; 18 }; 19 20 chosen { 21 stdout-path = "serial2:1500000n8"; 22 }; 23 24 clkin_gmac: external-gmac-clock { 25 compatible = "fixed-clock"; 26 clock-frequency = <125000000>; 27 clock-output-names = "clkin_gmac"; 28 #clock-cells = <0>; 29 }; 30 31 sdio_pwrseq: sdio-pwrseq { 32 compatible = "mmc-pwrseq-simple"; 33 clocks = <&rk808 1>; 34 clock-names = "ext_clock"; 35 pinctrl-names = "default"; 36 pinctrl-0 = <&wifi_enable_h>; 37 38 /* 39 * On the module itself this is one of these (depending 40 * on the actual card populated): 41 * - SDIO_RESET_L_WL_REG_ON 42 * - PDN (power down when low) 43 */ 44 reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>; 45 }; 46 47 /* switched by pmic_sleep */ 48 vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { 49 compatible = "regulator-fixed"; 50 regulator-name = "vcc1v8_s3"; 51 regulator-always-on; 52 regulator-boot-on; 53 regulator-min-microvolt = <1800000>; 54 regulator-max-microvolt = <1800000>; 55 vin-supply = <&vcc_1v8>; 56 }; 57 58 vcc3v3_pcie: vcc3v3-pcie-regulator { 59 compatible = "regulator-fixed"; 60 regulator-name = "vcc3v3_pcie"; 61 regulator-always-on; 62 regulator-boot-on; 63 regulator-min-microvolt = <3300000>; 64 regulator-max-microvolt = <3300000>; 65 vin-supply = <&vsys_3v3>; 66 }; 67 68 /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ 69 vcc5v0_host: vcc5v0-host-regulator { 70 compatible = "regulator-fixed"; 71 enable-active-high; 72 gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; 73 pinctrl-names = "default"; 74 pinctrl-0 = <&vcc5v0_host_en>; 75 regulator-name = "vcc5v0_host"; 76 regulator-always-on; 77 vin-supply = <&vsys_5v0>; 78 }; 79 80 vdd_log: vdd-log { 81 compatible = "pwm-regulator"; 82 pwms = <&pwm2 0 25000 1>; 83 regulator-name = "vdd_log"; 84 regulator-always-on; 85 regulator-boot-on; 86 regulator-min-microvolt = <800000>; 87 regulator-max-microvolt = <1400000>; 88 vin-supply = <&vsys_3v3>; 89 }; 90 91 vsys: vsys { 92 compatible = "regulator-fixed"; 93 regulator-name = "vsys"; 94 regulator-always-on; 95 regulator-boot-on; 96 }; 97 98 vsys_3v3: vsys-3v3 { 99 compatible = "regulator-fixed"; 100 regulator-name = "vsys_3v3"; 101 regulator-always-on; 102 regulator-boot-on; 103 regulator-min-microvolt = <3300000>; 104 regulator-max-microvolt = <3300000>; 105 vin-supply = <&vsys>; 106 }; 107 108 vsys_5v0: vsys-5v0 { 109 compatible = "regulator-fixed"; 110 regulator-name = "vsys_5v0"; 111 regulator-always-on; 112 regulator-boot-on; 113 regulator-min-microvolt = <5000000>; 114 regulator-max-microvolt = <5000000>; 115 vin-supply = <&vsys>; 116 }; 117 118 adc-keys { 119 compatible = "adc-keys"; 120 io-channels = <&saradc 1>; 121 io-channel-names = "buttons"; 122 keyup-threshold-microvolt = <1800000>; 123 poll-interval = <100>; 124 125 recovery { 126 label = "Recovery"; 127 linux,code = <KEY_VENDOR>; 128 press-threshold-microvolt = <18000>; 129 }; 130 }; 131 132 gpio-keys { 133 compatible = "gpio-keys"; 134 autorepeat; 135 pinctrl-names = "default"; 136 pinctrl-0 = <&pwrbtn>; 137 138 power { 139 debounce-interval = <100>; 140 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; 141 label = "GPIO Key Power"; 142 linux,code = <KEY_POWER>; 143 wakeup-source; 144 }; 145 }; 146 147 ir-receiver { 148 compatible = "gpio-ir-receiver"; 149 gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; 150 linux,rc-map-name = "rc-khadas"; 151 pinctrl-names = "default"; 152 pinctrl-0 = <&ir_rx>; 153 }; 154 155 leds { 156 compatible = "gpio-leds"; 157 pinctrl-names = "default"; 158 pinctrl-0 = <&sys_led_pin>, <&user_led_pin>; 159 160 sys_led: led-0 { 161 label = "sys_led"; 162 linux,default-trigger = "heartbeat"; 163 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; 164 }; 165 166 user_led: led-1 { 167 label = "user_led"; 168 default-state = "off"; 169 gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>; 170 }; 171 }; 172 173 fan: pwm-fan { 174 compatible = "pwm-fan"; 175 cooling-levels = <0 150 200 255>; 176 #cooling-cells = <2>; 177 fan-supply = <&vsys_5v0>; 178 pwms = <&pwm0 0 40000 0>; 179 }; 180}; 181 182&cpu_l0 { 183 cpu-supply = <&vdd_cpu_l>; 184}; 185 186&cpu_l1 { 187 cpu-supply = <&vdd_cpu_l>; 188}; 189 190&cpu_l2 { 191 cpu-supply = <&vdd_cpu_l>; 192}; 193 194&cpu_l3 { 195 cpu-supply = <&vdd_cpu_l>; 196}; 197 198&cpu_b0 { 199 cpu-supply = <&vdd_cpu_b>; 200}; 201 202&cpu_b1 { 203 cpu-supply = <&vdd_cpu_b>; 204}; 205 206&cpu_thermal { 207 trips { 208 cpu_warm: cpu_warm { 209 temperature = <55000>; 210 hysteresis = <2000>; 211 type = "active"; 212 }; 213 214 cpu_hot: cpu_hot { 215 temperature = <65000>; 216 hysteresis = <2000>; 217 type = "active"; 218 }; 219 }; 220 221 cooling-maps { 222 map2 { 223 trip = <&cpu_warm>; 224 cooling-device = <&fan THERMAL_NO_LIMIT 1>; 225 }; 226 227 map3 { 228 trip = <&cpu_hot>; 229 cooling-device = <&fan 2 THERMAL_NO_LIMIT>; 230 }; 231 }; 232}; 233 234&emmc_phy { 235 status = "okay"; 236}; 237 238&gmac { 239 assigned-clocks = <&cru SCLK_RMII_SRC>; 240 assigned-clock-parents = <&clkin_gmac>; 241 clock_in_out = "input"; 242 phy-supply = <&vcc_lan>; 243 phy-mode = "rgmii"; 244 pinctrl-names = "default"; 245 pinctrl-0 = <&rgmii_pins>; 246 snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; 247 snps,reset-active-low; 248 snps,reset-delays-us = <0 10000 50000>; 249 tx_delay = <0x28>; 250 rx_delay = <0x11>; 251}; 252 253&gpu { 254 mali-supply = <&vdd_gpu>; 255 status = "okay"; 256}; 257 258&gpu_thermal { 259 trips { 260 gpu_warm: gpu_warm { 261 temperature = <55000>; 262 hysteresis = <2000>; 263 type = "active"; 264 }; 265 266 gpu_hot: gpu_hot { 267 temperature = <65000>; 268 hysteresis = <2000>; 269 type = "active"; 270 }; 271 }; 272 273 cooling-maps { 274 map1 { 275 trip = <&gpu_warm>; 276 cooling-device = <&fan THERMAL_NO_LIMIT 1>; 277 }; 278 279 map2 { 280 trip = <&gpu_hot>; 281 cooling-device = <&fan 2 THERMAL_NO_LIMIT>; 282 }; 283 }; 284}; 285 286&hdmi { 287 ddc-i2c-bus = <&i2c3>; 288 pinctrl-names = "default"; 289 pinctrl-0 = <&hdmi_cec>; 290 status = "okay"; 291}; 292 293&hdmi_sound { 294 status = "okay"; 295}; 296 297&i2c3 { 298 i2c-scl-rising-time-ns = <450>; 299 i2c-scl-falling-time-ns = <15>; 300 status = "okay"; 301}; 302 303&i2c4 { 304 clock-frequency = <400000>; 305 i2c-scl-rising-time-ns = <168>; 306 i2c-scl-falling-time-ns = <4>; 307 status = "okay"; 308 309 rk808: pmic@1b { 310 compatible = "rockchip,rk808"; 311 reg = <0x1b>; 312 interrupt-parent = <&gpio1>; 313 interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>; 314 #clock-cells = <1>; 315 clock-output-names = "xin32k", "rk808-clkout2"; 316 pinctrl-names = "default"; 317 pinctrl-0 = <&pmic_int_l>; 318 rockchip,system-power-controller; 319 wakeup-source; 320 321 vcc1-supply = <&vsys_3v3>; 322 vcc2-supply = <&vsys_3v3>; 323 vcc3-supply = <&vsys_3v3>; 324 vcc4-supply = <&vsys_3v3>; 325 vcc6-supply = <&vsys_3v3>; 326 vcc7-supply = <&vsys_3v3>; 327 vcc8-supply = <&vsys_3v3>; 328 vcc9-supply = <&vsys_3v3>; 329 vcc10-supply = <&vsys_3v3>; 330 vcc11-supply = <&vsys_3v3>; 331 vcc12-supply = <&vsys_3v3>; 332 vddio-supply = <&vcc_1v8>; 333 334 regulators { 335 vdd_center: DCDC_REG1 { 336 regulator-name = "vdd_center"; 337 regulator-always-on; 338 regulator-boot-on; 339 regulator-min-microvolt = <750000>; 340 regulator-max-microvolt = <1350000>; 341 regulator-ramp-delay = <6001>; 342 343 regulator-state-mem { 344 regulator-off-in-suspend; 345 }; 346 }; 347 348 vdd_cpu_l: DCDC_REG2 { 349 regulator-name = "vdd_cpu_l"; 350 regulator-always-on; 351 regulator-boot-on; 352 regulator-min-microvolt = <750000>; 353 regulator-max-microvolt = <1350000>; 354 regulator-ramp-delay = <6001>; 355 356 regulator-state-mem { 357 regulator-off-in-suspend; 358 }; 359 }; 360 361 vcc_ddr: DCDC_REG3 { 362 regulator-name = "vcc_ddr"; 363 regulator-always-on; 364 regulator-boot-on; 365 366 regulator-state-mem { 367 regulator-on-in-suspend; 368 }; 369 }; 370 371 vcc_1v8: DCDC_REG4 { 372 regulator-name = "vcc_1v8"; 373 regulator-always-on; 374 regulator-boot-on; 375 regulator-min-microvolt = <1800000>; 376 regulator-max-microvolt = <1800000>; 377 378 regulator-state-mem { 379 regulator-on-in-suspend; 380 regulator-suspend-microvolt = <1800000>; 381 }; 382 }; 383 384 vcc1v8_apio2: LDO_REG1 { 385 regulator-name = "vcc1v8_apio2"; 386 regulator-always-on; 387 regulator-boot-on; 388 regulator-min-microvolt = <1800000>; 389 regulator-max-microvolt = <1800000>; 390 391 regulator-state-mem { 392 regulator-off-in-suspend; 393 }; 394 }; 395 396 vcc_vldo2: LDO_REG2 { 397 regulator-name = "vcc_vldo2"; 398 regulator-always-on; 399 regulator-boot-on; 400 regulator-min-microvolt = <3000000>; 401 regulator-max-microvolt = <3000000>; 402 403 regulator-state-mem { 404 regulator-off-in-suspend; 405 }; 406 }; 407 408 vcc1v8_pmupll: LDO_REG3 { 409 regulator-name = "vcc1v8_pmupll"; 410 regulator-always-on; 411 regulator-boot-on; 412 regulator-min-microvolt = <1800000>; 413 regulator-max-microvolt = <1800000>; 414 415 regulator-state-mem { 416 regulator-on-in-suspend; 417 regulator-suspend-microvolt = <1800000>; 418 }; 419 }; 420 421 vccio_sd: LDO_REG4 { 422 regulator-name = "vccio_sd"; 423 regulator-always-on; 424 regulator-boot-on; 425 regulator-min-microvolt = <1800000>; 426 regulator-max-microvolt = <3000000>; 427 428 regulator-state-mem { 429 regulator-on-in-suspend; 430 regulator-suspend-microvolt = <3000000>; 431 }; 432 }; 433 434 vcc_vldo5: LDO_REG5 { 435 regulator-name = "vcc_vldo5"; 436 regulator-always-on; 437 regulator-boot-on; 438 regulator-min-microvolt = <3000000>; 439 regulator-max-microvolt = <3000000>; 440 441 regulator-state-mem { 442 regulator-off-in-suspend; 443 }; 444 }; 445 446 vcc_1v5: LDO_REG6 { 447 regulator-name = "vcc_1v5"; 448 regulator-always-on; 449 regulator-boot-on; 450 regulator-min-microvolt = <1500000>; 451 regulator-max-microvolt = <1500000>; 452 453 regulator-state-mem { 454 regulator-on-in-suspend; 455 regulator-suspend-microvolt = <1500000>; 456 }; 457 }; 458 459 vcc1v8_codec: LDO_REG7 { 460 regulator-name = "vcc1v8_codec"; 461 regulator-always-on; 462 regulator-boot-on; 463 regulator-min-microvolt = <1800000>; 464 regulator-max-microvolt = <1800000>; 465 466 regulator-state-mem { 467 regulator-off-in-suspend; 468 }; 469 }; 470 471 vcc_3v0: LDO_REG8 { 472 regulator-name = "vcc_3v0"; 473 regulator-always-on; 474 regulator-boot-on; 475 regulator-min-microvolt = <3000000>; 476 regulator-max-microvolt = <3000000>; 477 478 regulator-state-mem { 479 regulator-on-in-suspend; 480 regulator-suspend-microvolt = <3000000>; 481 }; 482 }; 483 484 vcc3v3_s3: vcc_lan: SWITCH_REG1 { 485 regulator-name = "vcc3v3_s3"; 486 regulator-always-on; 487 regulator-boot-on; 488 489 regulator-state-mem { 490 regulator-off-in-suspend; 491 }; 492 }; 493 494 vcc3v3_s0: SWITCH_REG2 { 495 regulator-name = "vcc3v3_s0"; 496 regulator-always-on; 497 regulator-boot-on; 498 499 regulator-state-mem { 500 regulator-off-in-suspend; 501 }; 502 }; 503 }; 504 }; 505 506 vdd_cpu_b: regulator@40 { 507 compatible = "silergy,syr827"; 508 reg = <0x40>; 509 fcs,suspend-voltage-selector = <1>; 510 pinctrl-names = "default"; 511 pinctrl-0 = <&cpu_b_sleep>; 512 regulator-name = "vdd_cpu_b"; 513 regulator-min-microvolt = <712500>; 514 regulator-max-microvolt = <1500000>; 515 regulator-ramp-delay = <1000>; 516 regulator-always-on; 517 regulator-boot-on; 518 vin-supply = <&vsys_3v3>; 519 520 regulator-state-mem { 521 regulator-off-in-suspend; 522 }; 523 }; 524 525 vdd_gpu: regulator@41 { 526 compatible = "silergy,syr828"; 527 reg = <0x41>; 528 fcs,suspend-voltage-selector = <1>; 529 pinctrl-names = "default"; 530 pinctrl-0 = <&gpu_sleep>; 531 regulator-name = "vdd_gpu"; 532 regulator-min-microvolt = <712500>; 533 regulator-max-microvolt = <1500000>; 534 regulator-ramp-delay = <1000>; 535 regulator-always-on; 536 regulator-boot-on; 537 vin-supply = <&vsys_3v3>; 538 539 regulator-state-mem { 540 regulator-off-in-suspend; 541 }; 542 }; 543}; 544 545&i2c8 { 546 clock-frequency = <400000>; 547 i2c-scl-rising-time-ns = <160>; 548 i2c-scl-falling-time-ns = <30>; 549 status = "okay"; 550}; 551 552&i2s0 { 553 rockchip,playback-channels = <8>; 554 rockchip,capture-channels = <8>; 555 status = "okay"; 556}; 557 558&i2s1 { 559 rockchip,playback-channels = <2>; 560 rockchip,capture-channels = <2>; 561 status = "okay"; 562}; 563 564&i2s2 { 565 status = "okay"; 566}; 567 568&io_domains { 569 bt656-supply = <&vcc1v8_apio2>; 570 audio-supply = <&vcc1v8_codec>; 571 sdmmc-supply = <&vccio_sd>; 572 gpio1830-supply = <&vcc_3v0>; 573 status = "okay"; 574}; 575 576&pmu_io_domains { 577 pmu1830-supply = <&vcc_1v8>; 578 status = "okay"; 579}; 580 581&pinctrl { 582 bt { 583 bt_host_wake_l: bt-host-wake-l { 584 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; 585 }; 586 587 bt_reg_on_h: bt-reg-on-h { 588 rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; 589 }; 590 591 bt_wake_l: bt-wake-l { 592 rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; 593 }; 594 }; 595 596 buttons { 597 pwrbtn: pwrbtn { 598 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; 599 }; 600 }; 601 602 ir { 603 ir_rx: ir-rx { 604 rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; 605 }; 606 }; 607 608 leds { 609 sys_led_pin: sys-led-pin { 610 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; 611 }; 612 613 user_led_pin: user-led-pin { 614 rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; 615 }; 616 }; 617 618 pmic { 619 pmic_int_l: pmic-int-l { 620 rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; 621 }; 622 623 cpu_b_sleep: cpu-b-sleep { 624 rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; 625 }; 626 627 gpu_sleep: gpu-sleep { 628 rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; 629 }; 630 }; 631 632 sdio-pwrseq { 633 wifi_enable_h: wifi-enable-h { 634 rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; 635 }; 636 }; 637 638 usb2 { 639 vcc5v0_host_en: vcc5v0-host-en { 640 rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; 641 }; 642 }; 643 644 wifi { 645 wifi_host_wake_l: wifi-host-wake-l { 646 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; 647 }; 648 }; 649}; 650 651&pwm0 { 652 status = "okay"; 653}; 654 655&pwm2 { 656 status = "okay"; 657}; 658 659&saradc { 660 vref-supply = <&vcca1v8_s3>; 661 status = "okay"; 662}; 663 664&sdio0 { 665 /* WiFi & BT combo module Ampak AP6356S */ 666 bus-width = <4>; 667 cap-sdio-irq; 668 cap-sd-highspeed; 669 keep-power-in-suspend; 670 mmc-pwrseq = <&sdio_pwrseq>; 671 non-removable; 672 pinctrl-names = "default"; 673 pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; 674 sd-uhs-sdr104; 675 vqmmc-supply = <&vcc1v8_s3>; 676 vmmc-supply = <&vccio_sd>; 677 #address-cells = <1>; 678 #size-cells = <0>; 679 status = "okay"; 680 681 brcmf: wifi@1 { 682 reg = <1>; 683 compatible = "brcm,bcm4329-fmac"; 684 interrupt-parent = <&gpio0>; 685 interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; 686 interrupt-names = "host-wake"; 687 brcm,drive-strength = <5>; 688 pinctrl-names = "default"; 689 pinctrl-0 = <&wifi_host_wake_l>; 690 }; 691}; 692 693&sdmmc { 694 bus-width = <4>; 695 cap-mmc-highspeed; 696 cap-sd-highspeed; 697 cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; 698 disable-wp; 699 max-frequency = <150000000>; 700 pinctrl-names = "default"; 701 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; 702 status = "okay"; 703}; 704 705&sdhci { 706 bus-width = <8>; 707 mmc-hs400-1_8v; 708 mmc-hs400-enhanced-strobe; 709 non-removable; 710 status = "okay"; 711}; 712 713&spi1 { 714 status = "okay"; 715 716 spiflash: flash@0 { 717 compatible = "winbond,w25q128fw", "jedec,spi-nor"; 718 reg = <0>; 719 spi-max-frequency = <104000000>; 720 }; 721}; 722 723&tcphy0 { 724 status = "okay"; 725}; 726 727&tcphy1 { 728 status = "okay"; 729}; 730 731&tsadc { 732 /* tshut mode 0:CRU 1:GPIO */ 733 rockchip,hw-tshut-mode = <1>; 734 /* tshut polarity 0:LOW 1:HIGH */ 735 rockchip,hw-tshut-polarity = <1>; 736 status = "okay"; 737}; 738 739&u2phy0 { 740 status = "okay"; 741 742 u2phy0_otg: otg-port { 743 status = "okay"; 744 }; 745 746 u2phy0_host: host-port { 747 phy-supply = <&vcc5v0_host>; 748 status = "okay"; 749 }; 750}; 751 752&u2phy1 { 753 status = "okay"; 754 755 u2phy1_otg: otg-port { 756 status = "okay"; 757 }; 758 759 u2phy1_host: host-port { 760 phy-supply = <&vcc5v0_host>; 761 status = "okay"; 762 }; 763}; 764 765&uart0 { 766 pinctrl-names = "default"; 767 pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; 768 status = "okay"; 769 770 bluetooth { 771 compatible = "brcm,bcm43438-bt"; 772 clocks = <&rk808 1>; 773 clock-names = "lpo"; 774 device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; 775 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; 776 shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; 777 max-speed = <4000000>; 778 pinctrl-names = "default"; 779 pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; 780 vbat-supply = <&vsys_3v3>; 781 vddio-supply = <&vcc_1v8>; 782 }; 783}; 784 785&uart2 { 786 status = "okay"; 787}; 788 789&usb_host0_ehci { 790 status = "okay"; 791}; 792 793&usb_host0_ohci { 794 status = "okay"; 795}; 796 797&usb_host1_ehci { 798 status = "okay"; 799}; 800 801&usb_host1_ohci { 802 status = "okay"; 803}; 804 805&usbdrd3_0 { 806 status = "okay"; 807}; 808 809&usbdrd_dwc3_0 { 810 status = "okay"; 811 dr_mode = "otg"; 812}; 813 814&usbdrd3_1 { 815 status = "okay"; 816}; 817 818&usbdrd_dwc3_1 { 819 status = "okay"; 820 dr_mode = "host"; 821}; 822 823&vopb { 824 status = "okay"; 825}; 826 827&vopb_mmu { 828 status = "okay"; 829}; 830 831&vopl { 832 status = "okay"; 833}; 834 835&vopl_mmu { 836 status = "okay"; 837}; 838