1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2022 Fuzhou Rockchip Electronics Co., Ltd. 4 */ 5 6/dts-v1/; 7#include <dt-bindings/input/linux-event-codes.h> 8#include <dt-bindings/pwm/pwm.h> 9#include <dt-bindings/usb/pd.h> 10#include "rk3399.dtsi" 11#include "rk3399-opp.dtsi" 12 13/ { 14 model = "OPEN AI LAB EAIDK-610"; 15 compatible = "openailab,eaidk-610", "rockchip,rk3399"; 16 17 aliases { 18 mmc0 = &sdio0; 19 mmc1 = &sdmmc; 20 mmc2 = &sdhci; 21 }; 22 23 backlight: backlight { 24 compatible = "pwm-backlight"; 25 pwms = <&pwm0 0 25000 0>; 26 brightness-levels = < 27 0 1 2 3 4 5 6 7 28 8 9 10 11 12 13 14 15 29 16 17 18 19 20 21 22 23 30 24 25 26 27 28 29 30 31 31 32 33 34 35 36 37 38 39 32 40 41 42 43 44 45 46 47 33 48 49 50 51 52 53 54 55 34 56 57 58 59 60 61 62 63 35 64 65 66 67 68 69 70 71 36 72 73 74 75 76 77 78 79 37 80 81 82 83 84 85 86 87 38 88 89 90 91 92 93 94 95 39 96 97 98 99 100 101 102 103 40 104 105 106 107 108 109 110 111 41 112 113 114 115 116 117 118 119 42 120 121 122 123 124 125 126 127 43 128 129 130 131 132 133 134 135 44 136 137 138 139 140 141 142 143 45 144 145 146 147 148 149 150 151 46 152 153 154 155 156 157 158 159 47 160 161 162 163 164 165 166 167 48 168 169 170 171 172 173 174 175 49 176 177 178 179 180 181 182 183 50 184 185 186 187 188 189 190 191 51 192 193 194 195 196 197 198 199 52 200 201 202 203 204 205 206 207 53 208 209 210 211 212 213 214 215 54 216 217 218 219 220 221 222 223 55 224 225 226 227 228 229 230 231 56 232 233 234 235 236 237 238 239 57 240 241 242 243 244 245 246 247 58 248 249 250 251 252 253 254 255>; 59 default-brightness-level = <200>; 60 }; 61 62 clkin_gmac: external-gmac-clock { 63 compatible = "fixed-clock"; 64 clock-frequency = <125000000>; 65 clock-output-names = "clkin_gmac"; 66 #clock-cells = <0>; 67 }; 68 69 dc_12v: dc-12v { 70 compatible = "regulator-fixed"; 71 regulator-name = "dc_12v"; 72 regulator-always-on; 73 regulator-boot-on; 74 regulator-min-microvolt = <12000000>; 75 regulator-max-microvolt = <12000000>; 76 }; 77 78 gpio-keys { 79 compatible = "gpio-keys"; 80 autorepeat; 81 pinctrl-names = "default"; 82 pinctrl-0 = <&pwrbtn>; 83 84 key-power { 85 debounce-interval = <100>; 86 gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; 87 label = "GPIO Key Power"; 88 linux,code = <KEY_POWER>; 89 wakeup-source; 90 }; 91 }; 92 93 leds { 94 compatible = "gpio-leds"; 95 pinctrl-names = "default"; 96 pinctrl-0 = <&work_led_pin>, <&user_led_pin>, 97 <&heartbeat_led_pin>, <&wlan_active_led_pin>, 98 <&bt_active_led_pin>; 99 100 work_led: led-0 { 101 label = "blue:work"; 102 default-state = "on"; 103 gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; 104 }; 105 106 user_led: led-1 { 107 label = "read:user"; 108 default-state = "off"; 109 gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; 110 }; 111 112 heartbeat_led: led-2 { 113 label = "green:heartbeat"; 114 linux,default-trigger = "heartbeat"; 115 gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; 116 }; 117 118 wlan_active_led: led-3 { 119 label = "yellow:wlan"; 120 gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; 121 linux,default-trigger = "phy0tx"; 122 default-state = "off"; 123 }; 124 125 bt_active_led: led-4 { 126 label = "blue:bt"; 127 gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; 128 linux,default-trigger = "hci0-power"; 129 default-state = "off"; 130 }; 131 }; 132 133 rt5651-sound { 134 compatible = "simple-audio-card"; 135 simple-audio-card,name = "realtek,rt5651-codec"; 136 simple-audio-card,format = "i2s"; 137 simple-audio-card,mclk-fs = <256>; 138 simple-audio-card,widgets = 139 "Microphone", "Mic Jack", 140 "Headphone", "Headphone Jack"; 141 simple-audio-card,routing = 142 "Mic Jack", "MICBIAS1", 143 "IN1P", "Mic Jack", 144 "Headphone Jack", "HPOL", 145 "Headphone Jack", "HPOR"; 146 simple-audio-card,cpu { 147 sound-dai = <&i2s1>; 148 }; 149 simple-audio-card,codec { 150 sound-dai = <&rt5651>; 151 }; 152 }; 153 154 sdio_pwrseq: sdio-pwrseq { 155 compatible = "mmc-pwrseq-simple"; 156 clocks = <&rk808 1>; 157 clock-names = "ext_clock"; 158 pinctrl-names = "default"; 159 pinctrl-0 = <&wifi_enable_h>; 160 161 /* 162 * On the module itself this is one of these (depending 163 * on the actual card populated): 164 * - SDIO_RESET_L_WL_REG_ON 165 * - PDN (power down when low) 166 */ 167 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; 168 }; 169 170 /* switched by pmic_sleep */ 171 vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { 172 compatible = "regulator-fixed"; 173 regulator-name = "vcc1v8_s3"; 174 regulator-always-on; 175 regulator-boot-on; 176 regulator-min-microvolt = <1800000>; 177 regulator-max-microvolt = <1800000>; 178 vin-supply = <&vcc_1v8>; 179 }; 180 181 vcc3v3_sys: vcc3v3-sys { 182 compatible = "regulator-fixed"; 183 regulator-name = "vcc3v3_sys"; 184 regulator-always-on; 185 regulator-boot-on; 186 regulator-min-microvolt = <3300000>; 187 regulator-max-microvolt = <3300000>; 188 vin-supply = <&dc_12v>; 189 }; 190 191 vcc5v0_sys: vcc5v0-sys { 192 compatible = "regulator-fixed"; 193 regulator-name = "vcc5v0_sys"; 194 regulator-always-on; 195 regulator-boot-on; 196 regulator-min-microvolt = <5000000>; 197 regulator-max-microvolt = <5000000>; 198 vin-supply = <&dc_12v>; 199 }; 200 201 /* For USB3.0 Port1/2 */ 202 vcc5v0_host1: vcc5v0-host1-regulator { 203 compatible = "regulator-fixed"; 204 enable-active-high; 205 gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; 206 pinctrl-names = "default"; 207 pinctrl-0 = <&vcc5v0_host1_en>; 208 regulator-name = "vcc5v0_host1"; 209 regulator-always-on; 210 vin-supply = <&vcc5v0_sys>; 211 }; 212 213 /* For USB2.0 Port1/2 */ 214 vcc5v0_host3: vcc5v0-host3-regulator { 215 compatible = "regulator-fixed"; 216 enable-active-high; 217 gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; 218 pinctrl-names = "default"; 219 pinctrl-0 = <&vcc5v0_host3_en>; 220 regulator-name = "vcc5v0_host3"; 221 regulator-always-on; 222 vin-supply = <&vcc5v0_sys>; 223 }; 224 225 vcc5v0_typec: vcc5v0-typec-regulator { 226 compatible = "regulator-fixed"; 227 enable-active-high; 228 gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>; 229 pinctrl-names = "default"; 230 pinctrl-0 = <&vcc5v0_typec_en>; 231 regulator-name = "vcc5v0_typec"; 232 regulator-always-on; 233 vin-supply = <&vcc3v3_sys>; 234 }; 235 236 vdd_log: vdd-log { 237 compatible = "regulator-fixed"; 238 regulator-name = "vdd_log"; 239 regulator-always-on; 240 regulator-boot-on; 241 regulator-min-microvolt = <900000>; 242 regulator-max-microvolt = <900000>; 243 }; 244}; 245 246&cpu_l0 { 247 cpu-supply = <&vdd_cpu_l>; 248}; 249 250&cpu_l1 { 251 cpu-supply = <&vdd_cpu_l>; 252}; 253 254&cpu_l2 { 255 cpu-supply = <&vdd_cpu_l>; 256}; 257 258&cpu_l3 { 259 cpu-supply = <&vdd_cpu_l>; 260}; 261 262&cpu_b0 { 263 cpu-supply = <&vdd_cpu_b>; 264}; 265 266&cpu_b1 { 267 cpu-supply = <&vdd_cpu_b>; 268}; 269 270&emmc_phy { 271 status = "okay"; 272}; 273 274&gmac { 275 assigned-clocks = <&cru SCLK_RMII_SRC>; 276 assigned-clock-parents = <&clkin_gmac>; 277 clock_in_out = "input"; 278 phy-supply = <&vcc_lan>; 279 phy-mode = "rgmii"; 280 pinctrl-names = "default"; 281 pinctrl-0 = <&rgmii_pins>; 282 snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; 283 snps,reset-active-low; 284 snps,reset-delays-us = <0 10000 50000>; 285 tx_delay = <0x28>; 286 rx_delay = <0x11>; 287 status = "okay"; 288}; 289 290&gpu { 291 mali-supply = <&vdd_gpu>; 292 status = "okay"; 293}; 294 295&hdmi { 296 ddc-i2c-bus = <&i2c3>; 297 pinctrl-names = "default"; 298 pinctrl-0 = <&hdmi_cec>; 299 status = "okay"; 300}; 301 302&i2c0 { 303 status = "okay"; 304 305 rk808: pmic@1b { 306 compatible = "rockchip,rk808"; 307 reg = <0x1b>; 308 interrupt-parent = <&gpio1>; 309 interrupts = <21 IRQ_TYPE_LEVEL_LOW>; 310 pinctrl-names = "default"; 311 pinctrl-0 = <&pmic_int_l>; 312 rockchip,system-power-controller; 313 wakeup-source; 314 #clock-cells = <1>; 315 clock-output-names = "xin32k", "rk808-clkout2"; 316 317 vcc1-supply = <&vcc3v3_sys>; 318 vcc2-supply = <&vcc3v3_sys>; 319 vcc3-supply = <&vcc3v3_sys>; 320 vcc4-supply = <&vcc3v3_sys>; 321 vcc6-supply = <&vcc3v3_sys>; 322 vcc7-supply = <&vcc3v3_sys>; 323 vcc8-supply = <&vcc3v3_sys>; 324 vcc9-supply = <&vcc3v3_sys>; 325 vcc10-supply = <&vcc3v3_sys>; 326 vcc11-supply = <&vcc3v3_sys>; 327 vcc12-supply = <&vcc3v3_sys>; 328 vddio-supply = <&vcc_3v0>; 329 330 regulators { 331 vdd_center: DCDC_REG1 { 332 regulator-name = "vdd_center"; 333 regulator-min-microvolt = <750000>; 334 regulator-max-microvolt = <1350000>; 335 regulator-ramp-delay = <6001>; 336 regulator-always-on; 337 regulator-boot-on; 338 339 regulator-state-mem { 340 regulator-off-in-suspend; 341 }; 342 }; 343 344 vdd_cpu_l: DCDC_REG2 { 345 regulator-name = "vdd_cpu_l"; 346 regulator-min-microvolt = <750000>; 347 regulator-max-microvolt = <1350000>; 348 regulator-ramp-delay = <6001>; 349 regulator-always-on; 350 regulator-boot-on; 351 352 regulator-state-mem { 353 regulator-off-in-suspend; 354 }; 355 }; 356 357 vcc_ddr: DCDC_REG3 { 358 regulator-name = "vcc_ddr"; 359 regulator-always-on; 360 regulator-boot-on; 361 regulator-state-mem { 362 regulator-on-in-suspend; 363 }; 364 }; 365 366 vcc_1v8: DCDC_REG4 { 367 regulator-name = "vcc_1v8"; 368 regulator-min-microvolt = <1800000>; 369 regulator-max-microvolt = <1800000>; 370 regulator-always-on; 371 regulator-boot-on; 372 373 regulator-state-mem { 374 regulator-on-in-suspend; 375 regulator-suspend-microvolt = <1800000>; 376 }; 377 }; 378 379 vcc1v8_dvp: LDO_REG1 { 380 regulator-name = "vcc1v8_dvp"; 381 regulator-min-microvolt = <1800000>; 382 regulator-max-microvolt = <1800000>; 383 regulator-always-on; 384 regulator-boot-on; 385 386 regulator-state-mem { 387 regulator-off-in-suspend; 388 }; 389 }; 390 391 vcc2v8_dvp: LDO_REG2 { 392 regulator-name = "vcc2v8_dvp"; 393 regulator-min-microvolt = <2800000>; 394 regulator-max-microvolt = <2800000>; 395 regulator-always-on; 396 regulator-boot-on; 397 398 regulator-state-mem { 399 regulator-off-in-suspend; 400 }; 401 }; 402 403 vcc1v8_pmu: LDO_REG3 { 404 regulator-name = "vcc1v8_pmu"; 405 regulator-min-microvolt = <1800000>; 406 regulator-max-microvolt = <1800000>; 407 regulator-always-on; 408 regulator-boot-on; 409 410 regulator-state-mem { 411 regulator-on-in-suspend; 412 regulator-suspend-microvolt = <1800000>; 413 }; 414 }; 415 416 vcc_sdio: LDO_REG4 { 417 regulator-name = "vcc_sdio"; 418 regulator-min-microvolt = <1800000>; 419 regulator-max-microvolt = <3000000>; 420 regulator-always-on; 421 regulator-boot-on; 422 423 regulator-state-mem { 424 regulator-on-in-suspend; 425 regulator-suspend-microvolt = <3000000>; 426 }; 427 }; 428 429 vcca3v0_codec: LDO_REG5 { 430 regulator-name = "vcca3v0_codec"; 431 regulator-min-microvolt = <3000000>; 432 regulator-max-microvolt = <3000000>; 433 regulator-always-on; 434 regulator-boot-on; 435 436 regulator-state-mem { 437 regulator-off-in-suspend; 438 }; 439 }; 440 441 vcc_1v5: LDO_REG6 { 442 regulator-name = "vcc_1v5"; 443 regulator-min-microvolt = <1500000>; 444 regulator-max-microvolt = <1500000>; 445 regulator-always-on; 446 regulator-boot-on; 447 448 regulator-state-mem { 449 regulator-on-in-suspend; 450 regulator-suspend-microvolt = <1500000>; 451 }; 452 }; 453 454 vcca1v8_codec: LDO_REG7 { 455 regulator-name = "vcca1v8_codec"; 456 regulator-min-microvolt = <1800000>; 457 regulator-max-microvolt = <1800000>; 458 regulator-always-on; 459 regulator-boot-on; 460 461 regulator-state-mem { 462 regulator-off-in-suspend; 463 }; 464 }; 465 466 vcc_3v0: LDO_REG8 { 467 regulator-name = "vcc_3v0"; 468 regulator-min-microvolt = <3000000>; 469 regulator-max-microvolt = <3000000>; 470 regulator-always-on; 471 regulator-boot-on; 472 473 regulator-state-mem { 474 regulator-on-in-suspend; 475 regulator-suspend-microvolt = <3000000>; 476 }; 477 }; 478 479 vcc3v3_s3: vcc_lan: SWITCH_REG1 { 480 regulator-name = "vcc3v3_s3"; 481 regulator-always-on; 482 regulator-boot-on; 483 regulator-state-mem { 484 regulator-off-in-suspend; 485 }; 486 }; 487 488 vcc3v3_s0: SWITCH_REG2 { 489 regulator-name = "vcc3v3_s0"; 490 regulator-always-on; 491 regulator-boot-on; 492 regulator-state-mem { 493 regulator-off-in-suspend; 494 }; 495 }; 496 }; 497 }; 498 499 vdd_cpu_b: regulator@40 { 500 compatible = "silergy,syr827"; 501 reg = <0x40>; 502 fcs,suspend-voltage-selector = <1>; 503 regulator-name = "vdd_cpu_b"; 504 pinctrl-names = "default"; 505 pinctrl-0 = <&vsel1_pin>; 506 regulator-min-microvolt = <712500>; 507 regulator-max-microvolt = <1500000>; 508 regulator-ramp-delay = <1000>; 509 regulator-always-on; 510 regulator-boot-on; 511 vin-supply = <&vcc3v3_sys>; 512 513 regulator-state-mem { 514 regulator-off-in-suspend; 515 }; 516 }; 517 518 vdd_gpu: regulator@41 { 519 compatible = "silergy,syr828"; 520 reg = <0x41>; 521 fcs,suspend-voltage-selector = <1>; 522 regulator-name = "vdd_gpu"; 523 pinctrl-names = "default"; 524 pinctrl-0 = <&vsel2_pin>; 525 regulator-min-microvolt = <712500>; 526 regulator-max-microvolt = <1500000>; 527 regulator-ramp-delay = <1000>; 528 regulator-always-on; 529 regulator-boot-on; 530 vin-supply = <&vcc3v3_sys>; 531 532 regulator-state-mem { 533 regulator-off-in-suspend; 534 }; 535 }; 536}; 537 538&i2c1 { 539 i2c-scl-rising-time-ns = <300>; 540 i2c-scl-falling-time-ns = <15>; 541 status = "okay"; 542 543 rt5651: audio-codec@1a { 544 compatible = "rockchip,rt5651"; 545 reg = <0x1a>; 546 clocks = <&cru SCLK_I2S_8CH_OUT>; 547 clock-names = "mclk"; 548 hp-det-gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; 549 spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; 550 #sound-dai-cells = <0>; 551 }; 552 553}; 554 555&i2c3 { 556 i2c-scl-rising-time-ns = <450>; 557 i2c-scl-falling-time-ns = <15>; 558 status = "okay"; 559}; 560 561&i2c4 { 562 i2c-scl-rising-time-ns = <600>; 563 i2c-scl-falling-time-ns = <20>; 564 status = "okay"; 565 566 fusb0: typec-portc@22 { 567 compatible = "fcs,fusb302"; 568 reg = <0x22>; 569 interrupt-parent = <&gpio1>; 570 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; 571 pinctrl-names = "default"; 572 pinctrl-0 = <&fusb0_int>; 573 vbus-supply = <&vcc5v0_typec>; 574 575 ports { 576 #address-cells = <1>; 577 #size-cells = <0>; 578 579 port@0 { 580 reg = <0>; 581 usbc0_role_sw: endpoint@0 { 582 remote-endpoint = <&dwc3_0_role_switch>; 583 }; 584 }; 585 }; 586 587 connector { 588 compatible = "usb-c-connector"; 589 data-role = "dual"; 590 label = "USB-C"; 591 592 ports { 593 #address-cells = <1>; 594 #size-cells = <0>; 595 596 port@0 { 597 reg = <0>; 598 599 usbc_hs: endpoint { 600 remote-endpoint = <&u2phy0_typec_hs>; 601 }; 602 }; 603 604 port@1 { 605 reg = <1>; 606 607 usbc_ss: endpoint { 608 remote-endpoint = <&tcphy0_typec_ss>; 609 }; 610 }; 611 }; 612 }; 613 }; 614}; 615 616&i2s1 { 617 rockchip,playback-channels = <2>; 618 rockchip,capture-channels = <2>; 619 status = "okay"; 620}; 621 622&i2s2 { 623 status = "okay"; 624}; 625 626&io_domains { 627 status = "okay"; 628 629 audio-supply = <&vcca1v8_codec>; 630 bt656-supply = <&vcc_3v0>; 631 gpio1830-supply = <&vcc_3v0>; 632 sdmmc-supply = <&vcc_sdio>; 633}; 634 635&pmu_io_domains { 636 status = "okay"; 637 638 pmu1830-supply = <&vcc_3v0>; 639}; 640 641&pinctrl { 642 buttons { 643 pwrbtn: pwrbtn { 644 rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; 645 }; 646 }; 647 648 bt { 649 bt_enable_h: bt-enable-h { 650 rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; 651 }; 652 653 bt_host_wake_l: bt-host-wake-l { 654 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; 655 }; 656 657 bt_wake_l: bt-wake-l { 658 rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; 659 }; 660 }; 661 662 fusb302x { 663 fusb0_int: fusb0-int { 664 rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; 665 }; 666 }; 667 668 lcd-panel { 669 lcd_panel_reset: lcd-panel-reset { 670 rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; 671 }; 672 }; 673 674 leds { 675 work_led_pin: work-led-pin { 676 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; 677 }; 678 679 user_led_pin: user-led-pin { 680 rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; 681 }; 682 683 heartbeat_led_pin: heartbeat-led-pin { 684 rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; 685 }; 686 687 wlan_active_led_pin: wlan-led-pin { 688 rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; 689 }; 690 691 bt_active_led_pin: bt-led-pin { 692 rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; 693 }; 694 695 696 }; 697 698 pmic { 699 pmic_int_l: pmic-int-l { 700 rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; 701 }; 702 703 vsel1_pin: vsel1-pin { 704 rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; 705 }; 706 707 vsel2_pin: vsel2-pin { 708 rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; 709 }; 710 }; 711 712 rt5651 { 713 rt5651_hpcon: rt5640-hpcon { 714 rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; 715 }; 716 }; 717 718 sdio-pwrseq { 719 wifi_enable_h: wifi-enable-h { 720 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; 721 }; 722 }; 723 724 usb-typec { 725 vcc5v0_typec_en: vcc5v0_typec_en { 726 rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; 727 }; 728 }; 729 730 usb2 { 731 vcc5v0_host3_en: vcc5v0-host3-en { 732 rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; 733 }; 734 735 vcc5v0_host1_en: vcc5v0-host1-en { 736 rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; 737 }; 738 }; 739 740 wifi { 741 wifi_host_wake_l: wifi-host-wake-l { 742 rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; 743 }; 744 }; 745}; 746 747&pwm0 { 748 status = "okay"; 749}; 750 751&saradc { 752 vref-supply = <&vcca1v8_s3>; 753 status = "okay"; 754}; 755 756&sdio0 { 757 /* WiFi & BT combo module AMPAK AP6255 */ 758 #address-cells = <1>; 759 #size-cells = <0>; 760 bus-width = <4>; 761 clock-frequency = <50000000>; 762 cap-sdio-irq; 763 cap-sd-highspeed; 764 keep-power-in-suspend; 765 mmc-pwrseq = <&sdio_pwrseq>; 766 non-removable; 767 pinctrl-names = "default"; 768 pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; 769 sd-uhs-sdr104; 770 status = "okay"; 771 772 brcmf: wifi@1 { 773 compatible = "brcm,bcm4329-fmac"; 774 reg = <1>; 775 interrupt-parent = <&gpio0>; 776 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>; 777 interrupt-names = "host-wake"; 778 pinctrl-names = "default"; 779 pinctrl-0 = <&wifi_host_wake_l>; 780 }; 781}; 782 783&sdmmc { 784 bus-width = <4>; 785 cap-mmc-highspeed; 786 cap-sd-highspeed; 787 cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; 788 disable-wp; 789 max-frequency = <150000000>; 790 pinctrl-names = "default"; 791 pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; 792 status = "okay"; 793}; 794 795&sdhci { 796 bus-width = <8>; 797 non-removable; 798 status = "okay"; 799}; 800 801&tcphy0 { 802 status = "okay"; 803}; 804 805&tcphy0_usb3 { 806 orientation-switch; 807 port { 808 tcphy0_typec_ss: endpoint { 809 remote-endpoint = <&usbc_ss>; 810 }; 811 }; 812}; 813 814&tcphy1 { 815 status = "okay"; 816}; 817 818&tsadc { 819 /* tshut mode 0:CRU 1:GPIO */ 820 rockchip,hw-tshut-mode = <1>; 821 /* tshut polarity 0:LOW 1:HIGH */ 822 rockchip,hw-tshut-polarity = <1>; 823 status = "okay"; 824}; 825 826&u2phy0 { 827 status = "okay"; 828 829 u2phy0_otg: otg-port { 830 status = "okay"; 831 }; 832 833 u2phy0_host: host-port { 834 phy-supply = <&vcc5v0_host3>; 835 status = "okay"; 836 }; 837 838 port { 839 u2phy0_typec_hs: endpoint { 840 remote-endpoint = <&usbc_hs>; 841 }; 842 }; 843}; 844 845&u2phy1 { 846 status = "okay"; 847 848 u2phy1_otg: otg-port { 849 status = "okay"; 850 }; 851 852 u2phy1_host: host-port { 853 phy-supply = <&vcc5v0_host3>; 854 status = "okay"; 855 }; 856}; 857 858&uart0 { 859 pinctrl-names = "default"; 860 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; 861 status = "okay"; 862 863 bluetooth { 864 compatible = "brcm,bcm4345c5"; 865 clocks = <&rk808 1>; 866 clock-names = "lpo"; 867 device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; 868 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; 869 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; 870 max-speed = <1500000>; 871 pinctrl-names = "default"; 872 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; 873 vbat-supply = <&vcc3v3_sys>; 874 vddio-supply = <&vcc_1v8>; 875 }; 876}; 877 878&uart2 { 879 status = "okay"; 880}; 881 882&usb_host0_ehci { 883 status = "okay"; 884}; 885 886&usb_host0_ohci { 887 status = "okay"; 888}; 889 890&usb_host1_ehci { 891 status = "okay"; 892}; 893 894&usb_host1_ohci { 895 status = "okay"; 896}; 897 898&usbdrd3_0 { 899 status = "okay"; 900}; 901 902&usbdrd_dwc3_0 { 903 status = "okay"; 904 usb-role-switch; 905 906 port { 907 #address-cells = <1>; 908 #size-cells = <0>; 909 dwc3_0_role_switch: endpoint@0 { 910 reg = <0>; 911 remote-endpoint = <&usbc0_role_sw>; 912 }; 913 }; 914}; 915 916&usbdrd3_1 { 917 status = "okay"; 918}; 919 920&usbdrd_dwc3_1 { 921 status = "okay"; 922 dr_mode = "host"; 923}; 924 925&vopb { 926 status = "okay"; 927}; 928 929&vopb_mmu { 930 status = "okay"; 931}; 932 933&vopl { 934 status = "okay"; 935}; 936 937&vopl_mmu { 938 status = "okay"; 939}; 940