1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * (C) Copyright 2020 Chen-Yu Tsai <wens@csie.org> 4 * 5 * Based on ./rk3328-rock64.dts, which is 6 * 7 * Copyright (c) 2017 PINE64 8 */ 9 10/dts-v1/; 11 12#include <dt-bindings/gpio/gpio.h> 13#include <dt-bindings/input/input.h> 14#include <dt-bindings/leds/common.h> 15#include <dt-bindings/pinctrl/rockchip.h> 16 17#include "rk3328.dtsi" 18 19/ { 20 model = "Radxa ROCK Pi E"; 21 compatible = "radxa,rockpi-e", "rockchip,rk3328"; 22 23 aliases { 24 ethernet0 = &gmac2io; 25 ethernet1 = &gmac2phy; 26 mmc0 = &sdmmc; 27 mmc1 = &emmc; 28 }; 29 30 chosen { 31 stdout-path = "serial2:1500000n8"; 32 }; 33 34 adc-keys { 35 compatible = "adc-keys"; 36 io-channels = <&saradc 0>; 37 io-channel-names = "buttons"; 38 keyup-threshold-microvolt = <1750000>; 39 40 /* This button is unpopulated out of the factory. */ 41 button-recovery { 42 label = "Recovery"; 43 linux,code = <KEY_VENDOR>; 44 press-threshold-microvolt = <10000>; 45 }; 46 }; 47 48 gmac_clkin: external-gmac-clock { 49 compatible = "fixed-clock"; 50 clock-frequency = <125000000>; 51 clock-output-names = "gmac_clkin"; 52 #clock-cells = <0>; 53 }; 54 55 leds { 56 compatible = "gpio-leds"; 57 pinctrl-0 = <&led_pin>; 58 pinctrl-names = "default"; 59 60 led-0 { 61 color = <LED_COLOR_ID_BLUE>; 62 gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; 63 linux,default-trigger = "heartbeat"; 64 }; 65 }; 66 67 vcc_sd: sdmmc-regulator { 68 compatible = "regulator-fixed"; 69 gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; 70 pinctrl-names = "default"; 71 pinctrl-0 = <&sdmmc0m1_pin>; 72 regulator-name = "vcc_sd"; 73 regulator-boot-on; 74 vin-supply = <&vcc_io>; 75 }; 76 77 vcc_host_5v: vcc-host-5v-regulator { 78 compatible = "regulator-fixed"; 79 gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>; 80 pinctrl-names = "default"; 81 pinctrl-0 = <&usb30_host_drv>; 82 enable-active-high; 83 regulator-name = "vcc_host_5v"; 84 regulator-always-on; 85 regulator-boot-on; 86 vin-supply = <&vcc_sys>; 87 }; 88 89 vcc_sys: vcc-sys { 90 compatible = "regulator-fixed"; 91 regulator-name = "vcc_sys"; 92 regulator-always-on; 93 regulator-boot-on; 94 regulator-min-microvolt = <5000000>; 95 regulator-max-microvolt = <5000000>; 96 }; 97 98 vcc_wifi: vcc-wifi-regulator { 99 compatible = "regulator-fixed"; 100 gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; 101 pinctrl-names = "default"; 102 pinctrl-0 = <&wifi_en>; 103 regulator-name = "vcc_wifi"; 104 regulator-always-on; 105 regulator-boot-on; 106 vin-supply = <&vcc_io>; 107 }; 108}; 109 110&analog_sound { 111 status = "okay"; 112}; 113 114&codec { 115 status = "okay"; 116}; 117 118&cpu0 { 119 cpu-supply = <&vdd_arm>; 120}; 121 122&cpu1 { 123 cpu-supply = <&vdd_arm>; 124}; 125 126&cpu2 { 127 cpu-supply = <&vdd_arm>; 128}; 129 130&cpu3 { 131 cpu-supply = <&vdd_arm>; 132}; 133 134&emmc { 135 bus-width = <8>; 136 cap-mmc-highspeed; 137 mmc-ddr-1_8v; 138 mmc-hs200-1_8v; 139 non-removable; 140 pinctrl-names = "default"; 141 pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; 142 vmmc-supply = <&vcc_io>; 143 vqmmc-supply = <&vcc18_emmc>; 144 status = "okay"; 145}; 146 147&gmac2io { 148 assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; 149 assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; 150 clock_in_out = "input"; 151 phy-handle = <&rtl8211>; 152 phy-mode = "rgmii"; 153 phy-supply = <&vcc_io>; 154 pinctrl-names = "default"; 155 pinctrl-0 = <&rgmiim1_pins>; 156 snps,aal; 157 snps,rxpbl = <0x4>; 158 snps,txpbl = <0x4>; 159 tx_delay = <0x26>; 160 rx_delay = <0x11>; 161 status = "okay"; 162 163 mdio { 164 compatible = "snps,dwmac-mdio"; 165 #address-cells = <1>; 166 #size-cells = <0>; 167 168 rtl8211: ethernet-phy@1 { 169 reg = <1>; 170 pinctrl-0 = <ð_phy_int_pin>, <ð_phy_reset_pin>; 171 pinctrl-names = "default"; 172 interrupt-parent = <&gpio1>; 173 interrupts = <24 IRQ_TYPE_LEVEL_LOW>; 174 reset-assert-us = <10000>; 175 reset-deassert-us = <50000>; 176 reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; 177 }; 178 }; 179}; 180 181&gmac2phy { 182 status = "okay"; 183}; 184 185&gpio0 { 186 gpio-line-names = 187 /* GPIO0_A0 - A7 */ 188 "", "", "", "", "", "", "", "", 189 /* GPIO0_B0 - B7 */ 190 "", "", "", "", "", "", "", "", 191 /* GPIO0_C0 - C7 */ 192 "", "", "", "", "", "", "", "", 193 /* GPIO0_D0 - D7 */ 194 "", "", "", "pin-15 [GPIO0_D3]", "", "", "", ""; 195}; 196 197&gpio1 { 198 gpio-line-names = 199 /* GPIO1_A0 - A7 */ 200 "", "", "", "", "", "", "", "", 201 /* GPIO1_B0 - B7 */ 202 "", "", "", "", "", "", "", "", 203 /* GPIO1_C0 - C7 */ 204 "", "", "", "", "", "", "", "", 205 /* GPIO1_D0 - D7 */ 206 "", "", "", "", "pin-07 [GPIO1_D4]", "", "", ""; 207}; 208 209&gpio2 { 210 gpio-line-names = 211 /* GPIO2_A0 - A7 */ 212 "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]", 213 "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]", 214 "pin-33 [GPIO2_A6]", "", 215 /* GPIO2_B0 - B7 */ 216 "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]", 217 /* GPIO2_C0 - C7 */ 218 "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]", 219 "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]", 220 "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]", 221 /* GPIO2_D0 - D7 */ 222 "", "", "", "", "", "", "", ""; 223}; 224 225&gpio3 { 226 gpio-line-names = 227 /* GPIO3_A0 - A7 */ 228 "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]", 229 "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "", 230 /* GPIO3_B0 - B7 */ 231 "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "", 232 /* GPIO3_C0 - C7 */ 233 "", "", "", "", "", "", "", "", 234 /* GPIO3_D0 - D7 */ 235 "", "", "", "", "", "", "", ""; 236}; 237 238&i2c1 { 239 status = "okay"; 240 241 rk805: pmic@18 { 242 compatible = "rockchip,rk805"; 243 reg = <0x18>; 244 interrupt-parent = <&gpio0>; 245 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 246 #clock-cells = <1>; 247 clock-output-names = "xin32k", "rk805-clkout2"; 248 gpio-controller; 249 #gpio-cells = <2>; 250 pinctrl-names = "default"; 251 pinctrl-0 = <&pmic_int_l>; 252 rockchip,system-power-controller; 253 wakeup-source; 254 255 vcc1-supply = <&vcc_sys>; 256 vcc2-supply = <&vcc_sys>; 257 vcc3-supply = <&vcc_sys>; 258 vcc4-supply = <&vcc_sys>; 259 vcc5-supply = <&vcc_io>; 260 vcc6-supply = <&vcc_sys>; 261 262 regulators { 263 vdd_log: DCDC_REG1 { 264 regulator-name = "vdd_log"; 265 regulator-always-on; 266 regulator-boot-on; 267 regulator-min-microvolt = <712500>; 268 regulator-max-microvolt = <1450000>; 269 regulator-ramp-delay = <12500>; 270 271 regulator-state-mem { 272 regulator-on-in-suspend; 273 regulator-suspend-microvolt = <1000000>; 274 }; 275 }; 276 277 vdd_arm: DCDC_REG2 { 278 regulator-name = "vdd_arm"; 279 regulator-always-on; 280 regulator-boot-on; 281 regulator-min-microvolt = <712500>; 282 regulator-max-microvolt = <1450000>; 283 regulator-ramp-delay = <12500>; 284 285 regulator-state-mem { 286 regulator-on-in-suspend; 287 regulator-suspend-microvolt = <950000>; 288 }; 289 }; 290 291 vcc_ddr: DCDC_REG3 { 292 regulator-name = "vcc_ddr"; 293 regulator-always-on; 294 regulator-boot-on; 295 296 regulator-state-mem { 297 regulator-on-in-suspend; 298 }; 299 }; 300 301 vcc_io: DCDC_REG4 { 302 regulator-name = "vcc_io"; 303 regulator-always-on; 304 regulator-boot-on; 305 regulator-min-microvolt = <3300000>; 306 regulator-max-microvolt = <3300000>; 307 308 regulator-state-mem { 309 regulator-on-in-suspend; 310 regulator-suspend-microvolt = <3300000>; 311 }; 312 }; 313 314 vcc_18: LDO_REG1 { 315 regulator-name = "vcc_18"; 316 regulator-always-on; 317 regulator-boot-on; 318 regulator-min-microvolt = <1800000>; 319 regulator-max-microvolt = <1800000>; 320 321 regulator-state-mem { 322 regulator-on-in-suspend; 323 regulator-suspend-microvolt = <1800000>; 324 }; 325 }; 326 327 vcc18_emmc: LDO_REG2 { 328 regulator-name = "vcc18_emmc"; 329 regulator-always-on; 330 regulator-boot-on; 331 regulator-min-microvolt = <1800000>; 332 regulator-max-microvolt = <1800000>; 333 334 regulator-state-mem { 335 regulator-on-in-suspend; 336 regulator-suspend-microvolt = <1800000>; 337 }; 338 }; 339 340 vdd_10: LDO_REG3 { 341 regulator-name = "vdd_10"; 342 regulator-always-on; 343 regulator-boot-on; 344 regulator-min-microvolt = <1000000>; 345 regulator-max-microvolt = <1000000>; 346 347 regulator-state-mem { 348 regulator-on-in-suspend; 349 regulator-suspend-microvolt = <1000000>; 350 }; 351 }; 352 }; 353 }; 354}; 355 356&i2s1 { 357 status = "okay"; 358}; 359 360&io_domains { 361 pmuio-supply = <&vcc_io>; 362 vccio1-supply = <&vcc_io>; 363 vccio2-supply = <&vcc18_emmc>; 364 vccio3-supply = <&vcc_io>; 365 vccio4-supply = <&vcc_io>; 366 vccio5-supply = <&vcc_io>; 367 vccio6-supply = <&vcc_io>; 368 status = "okay"; 369}; 370 371&pinctrl { 372 ephy { 373 eth_phy_int_pin: eth-phy-int-pin { 374 rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>; 375 }; 376 377 eth_phy_reset_pin: eth-phy-reset-pin { 378 rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; 379 }; 380 }; 381 382 leds { 383 led_pin: led-pin { 384 rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; 385 }; 386 }; 387 388 pmic { 389 pmic_int_l: pmic-int-l { 390 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; 391 }; 392 }; 393 394 usb3 { 395 usb30_host_drv: usb30-host-drv { 396 rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; 397 }; 398 }; 399 400 wifi { 401 wifi_en: wifi-en { 402 rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; 403 }; 404 }; 405}; 406 407&sdmmc { 408 bus-width = <4>; 409 cap-sd-highspeed; 410 disable-wp; 411 pinctrl-names = "default"; 412 pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; 413 vmmc-supply = <&vcc_sd>; 414 status = "okay"; 415}; 416 417&saradc { 418 vref-supply = <&vcc_18>; 419 status = "okay"; 420}; 421 422&tsadc { 423 status = "okay"; 424}; 425 426&u2phy { 427 status = "okay"; 428}; 429 430&u2phy_host { 431 status = "okay"; 432}; 433 434&uart2 { 435 status = "okay"; 436}; 437 438&usbdrd3 { 439 dr_mode = "host"; 440 status = "okay"; 441}; 442 443&usb_host0_ehci { 444 status = "okay"; 445}; 446