1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Copyright (c) 2020 David Bauer <mail@david-bauer.net> 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/input/input.h> 9#include <dt-bindings/gpio/gpio.h> 10#include "rk3328.dtsi" 11 12/ { 13 aliases { 14 ethernet0 = &gmac2io; 15 ethernet1 = &rtl8153; 16 mmc0 = &sdmmc; 17 }; 18 19 chosen { 20 stdout-path = "serial2:1500000n8"; 21 }; 22 23 gmac_clk: gmac-clock { 24 compatible = "fixed-clock"; 25 clock-frequency = <125000000>; 26 clock-output-names = "gmac_clkin"; 27 #clock-cells = <0>; 28 }; 29 30 keys { 31 compatible = "gpio-keys"; 32 pinctrl-0 = <&reset_button_pin>; 33 pinctrl-names = "default"; 34 35 key-reset { 36 label = "reset"; 37 gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; 38 linux,code = <KEY_RESTART>; 39 debounce-interval = <50>; 40 }; 41 }; 42 43 leds { 44 compatible = "gpio-leds"; 45 pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>; 46 pinctrl-names = "default"; 47 48 lan_led: led-0 { 49 gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; 50 label = "nanopi-r2s:green:lan"; 51 }; 52 53 sys_led: led-1 { 54 gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; 55 label = "nanopi-r2s:red:sys"; 56 default-state = "on"; 57 }; 58 59 wan_led: led-2 { 60 gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>; 61 label = "nanopi-r2s:green:wan"; 62 }; 63 }; 64 65 vcc_io_sdio: sdmmcio-regulator { 66 compatible = "regulator-gpio"; 67 enable-active-high; 68 gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>; 69 pinctrl-0 = <&sdio_vcc_pin>; 70 pinctrl-names = "default"; 71 regulator-name = "vcc_io_sdio"; 72 regulator-always-on; 73 regulator-min-microvolt = <1800000>; 74 regulator-max-microvolt = <3300000>; 75 regulator-settling-time-us = <5000>; 76 regulator-type = "voltage"; 77 startup-delay-us = <2000>; 78 states = <1800000 0x1>, 79 <3300000 0x0>; 80 vin-supply = <&vcc_io_33>; 81 }; 82 83 vcc_sd: sdmmc-regulator { 84 compatible = "regulator-fixed"; 85 gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; 86 pinctrl-0 = <&sdmmc0m1_pin>; 87 pinctrl-names = "default"; 88 regulator-name = "vcc_sd"; 89 regulator-boot-on; 90 regulator-min-microvolt = <3300000>; 91 regulator-max-microvolt = <3300000>; 92 vin-supply = <&vcc_io_33>; 93 }; 94 95 vdd_5v: vdd-5v { 96 compatible = "regulator-fixed"; 97 regulator-name = "vdd_5v"; 98 regulator-always-on; 99 regulator-boot-on; 100 regulator-min-microvolt = <5000000>; 101 regulator-max-microvolt = <5000000>; 102 }; 103 104 vdd_5v_lan: vdd-5v-lan { 105 compatible = "regulator-fixed"; 106 enable-active-high; 107 gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; 108 pinctrl-0 = <&lan_vdd_pin>; 109 pinctrl-names = "default"; 110 regulator-name = "vdd_5v_lan"; 111 regulator-always-on; 112 regulator-boot-on; 113 vin-supply = <&vdd_5v>; 114 }; 115}; 116 117&cpu0 { 118 cpu-supply = <&vdd_arm>; 119}; 120 121&cpu1 { 122 cpu-supply = <&vdd_arm>; 123}; 124 125&cpu2 { 126 cpu-supply = <&vdd_arm>; 127}; 128 129&cpu3 { 130 cpu-supply = <&vdd_arm>; 131}; 132 133&display_subsystem { 134 status = "disabled"; 135}; 136 137&gmac2io { 138 assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; 139 assigned-clock-parents = <&gmac_clk>, <&gmac_clk>; 140 clock_in_out = "input"; 141 phy-mode = "rgmii"; 142 phy-supply = <&vcc_io_33>; 143 pinctrl-0 = <&rgmiim1_pins>; 144 pinctrl-names = "default"; 145 snps,aal; 146 147 mdio { 148 compatible = "snps,dwmac-mdio"; 149 #address-cells = <1>; 150 #size-cells = <0>; 151 }; 152}; 153 154&i2c1 { 155 status = "okay"; 156 157 rk805: pmic@18 { 158 compatible = "rockchip,rk805"; 159 reg = <0x18>; 160 interrupt-parent = <&gpio1>; 161 interrupts = <24 IRQ_TYPE_LEVEL_LOW>; 162 #clock-cells = <1>; 163 clock-output-names = "xin32k", "rk805-clkout2"; 164 gpio-controller; 165 #gpio-cells = <2>; 166 pinctrl-0 = <&pmic_int_l>; 167 pinctrl-names = "default"; 168 system-power-controller; 169 wakeup-source; 170 171 vcc1-supply = <&vdd_5v>; 172 vcc2-supply = <&vdd_5v>; 173 vcc3-supply = <&vdd_5v>; 174 vcc4-supply = <&vdd_5v>; 175 vcc5-supply = <&vcc_io_33>; 176 vcc6-supply = <&vdd_5v>; 177 178 regulators { 179 vdd_log: DCDC_REG1 { 180 regulator-name = "vdd_log"; 181 regulator-always-on; 182 regulator-boot-on; 183 regulator-min-microvolt = <712500>; 184 regulator-max-microvolt = <1450000>; 185 regulator-ramp-delay = <12500>; 186 187 regulator-state-mem { 188 regulator-on-in-suspend; 189 regulator-suspend-microvolt = <1000000>; 190 }; 191 }; 192 193 vdd_arm: DCDC_REG2 { 194 regulator-name = "vdd_arm"; 195 regulator-always-on; 196 regulator-boot-on; 197 regulator-min-microvolt = <712500>; 198 regulator-max-microvolt = <1450000>; 199 regulator-ramp-delay = <12500>; 200 201 regulator-state-mem { 202 regulator-on-in-suspend; 203 regulator-suspend-microvolt = <950000>; 204 }; 205 }; 206 207 vcc_ddr: DCDC_REG3 { 208 regulator-name = "vcc_ddr"; 209 regulator-always-on; 210 regulator-boot-on; 211 212 regulator-state-mem { 213 regulator-on-in-suspend; 214 }; 215 }; 216 217 vcc_io_33: DCDC_REG4 { 218 regulator-name = "vcc_io_33"; 219 regulator-always-on; 220 regulator-boot-on; 221 regulator-min-microvolt = <3300000>; 222 regulator-max-microvolt = <3300000>; 223 224 regulator-state-mem { 225 regulator-on-in-suspend; 226 regulator-suspend-microvolt = <3300000>; 227 }; 228 }; 229 230 vcc_18: LDO_REG1 { 231 regulator-name = "vcc_18"; 232 regulator-always-on; 233 regulator-boot-on; 234 regulator-min-microvolt = <1800000>; 235 regulator-max-microvolt = <1800000>; 236 237 regulator-state-mem { 238 regulator-on-in-suspend; 239 regulator-suspend-microvolt = <1800000>; 240 }; 241 }; 242 243 vcc18_emmc: LDO_REG2 { 244 regulator-name = "vcc18_emmc"; 245 regulator-always-on; 246 regulator-boot-on; 247 regulator-min-microvolt = <1800000>; 248 regulator-max-microvolt = <1800000>; 249 250 regulator-state-mem { 251 regulator-on-in-suspend; 252 regulator-suspend-microvolt = <1800000>; 253 }; 254 }; 255 256 vdd_10: LDO_REG3 { 257 regulator-name = "vdd_10"; 258 regulator-always-on; 259 regulator-boot-on; 260 regulator-min-microvolt = <1000000>; 261 regulator-max-microvolt = <1000000>; 262 263 regulator-state-mem { 264 regulator-on-in-suspend; 265 regulator-suspend-microvolt = <1000000>; 266 }; 267 }; 268 }; 269 }; 270}; 271 272&io_domains { 273 pmuio-supply = <&vcc_io_33>; 274 vccio1-supply = <&vcc_io_33>; 275 vccio2-supply = <&vcc18_emmc>; 276 vccio3-supply = <&vcc_io_sdio>; 277 vccio4-supply = <&vcc_18>; 278 vccio5-supply = <&vcc_io_33>; 279 vccio6-supply = <&vcc_io_33>; 280 status = "okay"; 281}; 282 283&pinctrl { 284 button { 285 reset_button_pin: reset-button-pin { 286 rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; 287 }; 288 }; 289 290 gmac2io { 291 eth_phy_reset_pin: eth-phy-reset-pin { 292 rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; 293 }; 294 }; 295 296 leds { 297 lan_led_pin: lan-led-pin { 298 rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; 299 }; 300 301 sys_led_pin: sys-led-pin { 302 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; 303 }; 304 305 wan_led_pin: wan-led-pin { 306 rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; 307 }; 308 }; 309 310 lan { 311 lan_vdd_pin: lan-vdd-pin { 312 rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; 313 }; 314 }; 315 316 pmic { 317 pmic_int_l: pmic-int-l { 318 rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; 319 }; 320 }; 321 322 sd { 323 sdio_vcc_pin: sdio-vcc-pin { 324 rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; 325 }; 326 }; 327}; 328 329&pwm2 { 330 status = "okay"; 331}; 332 333&sdmmc { 334 bus-width = <4>; 335 cap-sd-highspeed; 336 disable-wp; 337 pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>; 338 pinctrl-names = "default"; 339 sd-uhs-sdr12; 340 sd-uhs-sdr25; 341 sd-uhs-sdr50; 342 sd-uhs-sdr104; 343 vmmc-supply = <&vcc_sd>; 344 vqmmc-supply = <&vcc_io_sdio>; 345 status = "okay"; 346}; 347 348&tsadc { 349 rockchip,hw-tshut-mode = <0>; 350 rockchip,hw-tshut-polarity = <0>; 351 status = "okay"; 352}; 353 354&u2phy { 355 status = "okay"; 356}; 357 358&u2phy_host { 359 status = "okay"; 360}; 361 362&u2phy_otg { 363 status = "okay"; 364}; 365 366&uart2 { 367 status = "okay"; 368}; 369 370&usb20_otg { 371 status = "okay"; 372 dr_mode = "host"; 373}; 374 375&usbdrd3 { 376 dr_mode = "host"; 377 status = "okay"; 378 #address-cells = <1>; 379 #size-cells = <0>; 380 381 /* Second port is for USB 3.0 */ 382 rtl8153: device@2 { 383 compatible = "usbbda,8153"; 384 reg = <2>; 385 }; 386}; 387 388&usb_host0_ehci { 389 status = "okay"; 390}; 391 392&usb_host0_ohci { 393 status = "okay"; 394}; 395