1// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2/* 3 * Device Tree Source for the RZ/G2UL SMARC SOM common parts 4 * 5 * Copyright (C) 2022 Renesas Electronics Corp. 6 */ 7 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/interrupt-controller/irqc-rzg2l.h> 10#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> 11 12/ { 13 aliases { 14 ethernet0 = ð0; 15 ethernet1 = ð1; 16 }; 17 18 chosen { 19 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; 20 }; 21 22 memory@48000000 { 23 device_type = "memory"; 24 /* first 128MB is reserved for secure area. */ 25 reg = <0x0 0x48000000 0x0 0x38000000>; 26 }; 27 28 reg_1p8v: regulator-1p8v { 29 compatible = "regulator-fixed"; 30 regulator-name = "fixed-1.8V"; 31 regulator-min-microvolt = <1800000>; 32 regulator-max-microvolt = <1800000>; 33 regulator-boot-on; 34 regulator-always-on; 35 }; 36 37 reg_3p3v: regulator-3p3v { 38 compatible = "regulator-fixed"; 39 regulator-name = "fixed-3.3V"; 40 regulator-min-microvolt = <3300000>; 41 regulator-max-microvolt = <3300000>; 42 regulator-boot-on; 43 regulator-always-on; 44 }; 45 46#if !(SW_SW0_DEV_SEL) 47 vccq_sdhi0: regulator-vccq-sdhi0 { 48 compatible = "regulator-gpio"; 49 50 regulator-name = "SDHI0 VccQ"; 51 regulator-min-microvolt = <1800000>; 52 regulator-max-microvolt = <3300000>; 53 states = <3300000 1>, <1800000 0>; 54 regulator-boot-on; 55 gpios = <&pinctrl RZG2L_GPIO(6, 2) GPIO_ACTIVE_HIGH>; 56 regulator-always-on; 57 }; 58#endif 59}; 60 61#if (SW_SW0_DEV_SEL) 62&adc { 63 pinctrl-0 = <&adc_pins>; 64 pinctrl-names = "default"; 65 status = "okay"; 66}; 67#endif 68 69#if (!SW_ET0_EN_N) 70ð0 { 71 pinctrl-0 = <ð0_pins>; 72 pinctrl-names = "default"; 73 phy-handle = <&phy0>; 74 phy-mode = "rgmii-id"; 75 status = "okay"; 76 77 phy0: ethernet-phy@7 { 78 compatible = "ethernet-phy-id0022.1640", 79 "ethernet-phy-ieee802.3-c22"; 80 reg = <7>; 81 interrupts-extended = <&irqc RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>; 82 rxc-skew-psec = <2400>; 83 txc-skew-psec = <2400>; 84 rxdv-skew-psec = <0>; 85 txen-skew-psec = <0>; 86 rxd0-skew-psec = <0>; 87 rxd1-skew-psec = <0>; 88 rxd2-skew-psec = <0>; 89 rxd3-skew-psec = <0>; 90 txd0-skew-psec = <0>; 91 txd1-skew-psec = <0>; 92 txd2-skew-psec = <0>; 93 txd3-skew-psec = <0>; 94 }; 95}; 96#endif 97 98ð1 { 99 pinctrl-0 = <ð1_pins>; 100 pinctrl-names = "default"; 101 phy-handle = <&phy1>; 102 phy-mode = "rgmii-id"; 103 status = "okay"; 104 105 phy1: ethernet-phy@7 { 106 compatible = "ethernet-phy-id0022.1640", 107 "ethernet-phy-ieee802.3-c22"; 108 reg = <7>; 109 interrupts-extended = <&irqc RZG2L_IRQ7 IRQ_TYPE_LEVEL_LOW>; 110 rxc-skew-psec = <2400>; 111 txc-skew-psec = <2400>; 112 rxdv-skew-psec = <0>; 113 txen-skew-psec = <0>; 114 rxd0-skew-psec = <0>; 115 rxd1-skew-psec = <0>; 116 rxd2-skew-psec = <0>; 117 rxd3-skew-psec = <0>; 118 txd0-skew-psec = <0>; 119 txd1-skew-psec = <0>; 120 txd2-skew-psec = <0>; 121 txd3-skew-psec = <0>; 122 }; 123}; 124 125&extal_clk { 126 clock-frequency = <24000000>; 127}; 128 129&ostm1 { 130 status = "okay"; 131}; 132 133&ostm2 { 134 status = "okay"; 135}; 136 137&pinctrl { 138 adc_pins: adc { 139 pinmux = <RZG2L_PORT_PINMUX(6, 2, 1)>; /* ADC_TRG */ 140 }; 141 142 eth0_pins: eth0 { 143 txc { 144 pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>; /* ET0_TXC */ 145 power-source = <1800>; 146 output-enable; 147 }; 148 149 mux { 150 pinmux = <RZG2L_PORT_PINMUX(4, 5, 1)>, /* ET0_LINKSTA */ 151 <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */ 152 <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */ 153 <RZG2L_PORT_PINMUX(1, 1, 1)>, /* ET0_TX_CTL */ 154 <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */ 155 <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */ 156 <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */ 157 <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */ 158 <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */ 159 <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */ 160 <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */ 161 <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */ 162 <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */ 163 <RZG2L_PORT_PINMUX(4, 1, 1)>; /* ET0_RXD3 */ 164 power-source = <1800>; 165 }; 166 167 irq { 168 pinmux = <RZG2L_PORT_PINMUX(5, 1, 7)>; /* IRQ2 */ 169 }; 170 }; 171 172 eth1_pins: eth1 { 173 txc { 174 pinmux = <RZG2L_PORT_PINMUX(7, 0, 1)>; /* ET1_TXC */ 175 power-source = <1800>; 176 output-enable; 177 }; 178 179 mux { 180 pinmux = <RZG2L_PORT_PINMUX(10, 4, 1)>, /* ET1_LINKSTA */ 181 <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */ 182 <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */ 183 <RZG2L_PORT_PINMUX(7, 1, 1)>, /* ET1_TX_CTL */ 184 <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */ 185 <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */ 186 <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */ 187 <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */ 188 <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */ 189 <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */ 190 <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */ 191 <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */ 192 <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */ 193 <RZG2L_PORT_PINMUX(10, 0, 1)>; /* ET1_RXD3 */ 194 power-source = <1800>; 195 }; 196 197 irq { 198 pinmux = <RZG2L_PORT_PINMUX(18, 5, 1)>; /* IRQ7 */ 199 }; 200 }; 201 202 qspi0_pins: qspi0 { 203 pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3", 204 "QSPI0_SPCLK", "QSPI0_SSL"; 205 power-source = <1800>; 206 }; 207 208 sdhi0_emmc_pins: sd0emmc { 209 sd0_emmc_data { 210 pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3", 211 "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7"; 212 power-source = <1800>; 213 }; 214 215 sd0_emmc_ctrl { 216 pins = "SD0_CLK", "SD0_CMD"; 217 power-source = <1800>; 218 }; 219 220 sd0_emmc_rst { 221 pins = "SD0_RST#"; 222 power-source = <1800>; 223 }; 224 }; 225 226 sdhi0_pins: sd0 { 227 sd0_data { 228 pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; 229 power-source = <3300>; 230 }; 231 232 sd0_ctrl { 233 pins = "SD0_CLK", "SD0_CMD"; 234 power-source = <3300>; 235 }; 236 237 sd0_mux { 238 pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */ 239 }; 240 }; 241 242 sdhi0_pins_uhs: sd0_uhs { 243 sd0_data_uhs { 244 pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; 245 power-source = <1800>; 246 }; 247 248 sd0_ctrl_uhs { 249 pins = "SD0_CLK", "SD0_CMD"; 250 power-source = <1800>; 251 }; 252 253 sd0_mux_uhs { 254 pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* SD0_CD */ 255 }; 256 }; 257}; 258 259&sbc { 260 pinctrl-0 = <&qspi0_pins>; 261 pinctrl-names = "default"; 262 status = "okay"; 263 264 flash@0 { 265 compatible = "jedec,spi-nor"; 266 reg = <0>; 267 spi-max-frequency = <50000000>; 268 spi-tx-bus-width = <4>; 269 spi-rx-bus-width = <4>; 270 271 spi-cpol; 272 spi-cpha; 273 m25p,fast-read; 274 275 partitions { 276 compatible = "fixed-partitions"; 277 #address-cells = <1>; 278 #size-cells = <1>; 279 280 partition@0 { 281 label = "bl2"; 282 reg = <0x00000000 0x0001d000>; 283 }; 284 285 partition@1d000 { /* fip is at offset 0x200 */ 286 label = "fip"; 287 reg = <0x0001d000 0x7e3000>; 288 }; 289 290 partition@800000 { 291 label = "user"; 292 reg = <0x800000 0x800000>; 293 }; 294 }; 295 }; 296}; 297 298#if (SW_SW0_DEV_SEL) 299&sdhi0 { 300 pinctrl-0 = <&sdhi0_emmc_pins>; 301 pinctrl-1 = <&sdhi0_emmc_pins>; 302 pinctrl-names = "default", "state_uhs"; 303 304 vmmc-supply = <®_3p3v>; 305 vqmmc-supply = <®_1p8v>; 306 bus-width = <8>; 307 mmc-hs200-1_8v; 308 non-removable; 309 fixed-emmc-driver-type = <1>; 310 status = "okay"; 311}; 312#else 313&sdhi0 { 314 pinctrl-0 = <&sdhi0_pins>; 315 pinctrl-1 = <&sdhi0_pins_uhs>; 316 pinctrl-names = "default", "state_uhs"; 317 318 vmmc-supply = <®_3p3v>; 319 vqmmc-supply = <&vccq_sdhi0>; 320 bus-width = <4>; 321 sd-uhs-sdr50; 322 sd-uhs-sdr104; 323 status = "okay"; 324}; 325#endif 326 327&wdt0 { 328 status = "okay"; 329 timeout-sec = <60>; 330}; 331