1// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2/* 3 * Device Tree Source for the RZ/G2LC SMARC pincontrol parts 4 * 5 * Copyright (C) 2021 Renesas Electronics Corp. 6 */ 7 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> 10 11&pinctrl { 12 pinctrl-0 = <&sound_clk_pins>; 13 pinctrl-names = "default"; 14 15#if SW_SCIF_CAN 16 /* SW8 should be at position 2->1 */ 17 can1_pins: can1 { 18 pinmux = <RZG2L_PORT_PINMUX(40, 0, 3)>, /* TxD */ 19 <RZG2L_PORT_PINMUX(40, 1, 3)>; /* RxD */ 20 }; 21#endif 22 23#if SW_RSPI_CAN 24 /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */ 25 can1-stb-hog { 26 gpio-hog; 27 gpios = <RZG2L_GPIO(44, 3) GPIO_ACTIVE_HIGH>; 28 output-low; 29 line-name = "can1_stb"; 30 }; 31 32 can1_pins: can1 { 33 pinmux = <RZG2L_PORT_PINMUX(44, 0, 3)>, /* TxD */ 34 <RZG2L_PORT_PINMUX(44, 1, 3)>; /* RxD */ 35 }; 36#endif 37 38 i2c0_pins: i2c0 { 39 pins = "RIIC0_SDA", "RIIC0_SCL"; 40 input-enable; 41 }; 42 43 i2c1_pins: i2c1 { 44 pins = "RIIC1_SDA", "RIIC1_SCL"; 45 input-enable; 46 }; 47 48 i2c2_pins: i2c2 { 49 pinmux = <RZG2L_PORT_PINMUX(42, 3, 1)>, /* SDA */ 50 <RZG2L_PORT_PINMUX(42, 4, 1)>; /* SCL */ 51 }; 52 53 scif0_pins: scif0 { 54 pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */ 55 <RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */ 56 }; 57 58 scif1_pins: scif1 { 59 pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */ 60 <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */ 61 <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */ 62 <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */ 63 }; 64 65 sd1-pwr-en-hog { 66 gpio-hog; 67 gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>; 68 output-high; 69 line-name = "sd1_pwr_en"; 70 }; 71 72 sdhi1_pins: sd1 { 73 sd1_data { 74 pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; 75 power-source = <3300>; 76 }; 77 78 sd1_ctrl { 79 pins = "SD1_CLK", "SD1_CMD"; 80 power-source = <3300>; 81 }; 82 83 sd1_mux { 84 pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ 85 }; 86 }; 87 88 sdhi1_pins_uhs: sd1_uhs { 89 sd1_data_uhs { 90 pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; 91 power-source = <1800>; 92 }; 93 94 sd1_ctrl_uhs { 95 pins = "SD1_CLK", "SD1_CMD"; 96 power-source = <1800>; 97 }; 98 99 sd1_mux_uhs { 100 pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */ 101 }; 102 }; 103 104 sound_clk_pins: sound_clk { 105 pins = "AUDIO_CLK1", "AUDIO_CLK2"; 106 input-enable; 107 }; 108 109 spi1_pins: spi1 { 110 pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */ 111 <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */ 112 <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */ 113 <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */ 114 }; 115 116 ssi0_pins: ssi0 { 117 pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */ 118 <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */ 119 <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */ 120 <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */ 121 }; 122 123 usb0_pins: usb0 { 124 pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */ 125 <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */ 126 <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */ 127 }; 128 129 usb1_pins: usb1 { 130 pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */ 131 <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */ 132 }; 133}; 134 135