xref: /linux/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts (revision c3bdd5e65185f46150b3bac103b3854040487857)
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * Device Tree Source for the ebisu board
4 *
5 * Copyright (C) 2018 Renesas Electronics Corp.
6 */
7
8/dts-v1/;
9#include "r8a77990.dtsi"
10#include <dt-bindings/gpio/gpio.h>
11
12/ {
13	model = "Renesas Ebisu board based on r8a77990";
14	compatible = "renesas,ebisu", "renesas,r8a77990";
15
16	aliases {
17		serial0 = &scif2;
18		ethernet0 = &avb;
19	};
20
21	chosen {
22		bootargs = "ignore_loglevel";
23		stdout-path = "serial0:115200n8";
24	};
25
26	memory@48000000 {
27		device_type = "memory";
28		/* first 128MB is reserved for secure area. */
29		reg = <0x0 0x48000000 0x0 0x38000000>;
30	};
31
32	audio_clkout: audio-clkout {
33		/*
34		 * This is same as <&rcar_sound 0>
35		 * but needed to avoid cs2000/rcar_sound probe dead-lock
36		 */
37		compatible = "fixed-clock";
38		#clock-cells = <0>;
39		clock-frequency = <11289600>;
40	};
41
42	backlight: backlight {
43		compatible = "pwm-backlight";
44		pwms = <&pwm3 0 50000>;
45
46		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
47		default-brightness-level = <10>;
48
49		power-supply = <&reg_12p0v>;
50	};
51
52	cvbs-in {
53		compatible = "composite-video-connector";
54		label = "CVBS IN";
55
56		port {
57			cvbs_con: endpoint {
58				remote-endpoint = <&adv7482_ain7>;
59			};
60		};
61	};
62
63	hdmi-in {
64		compatible = "hdmi-connector";
65		label = "HDMI IN";
66		type = "a";
67
68		port {
69			hdmi_in_con: endpoint {
70				remote-endpoint = <&adv7482_hdmi>;
71			};
72		};
73	};
74
75	hdmi-out {
76		compatible = "hdmi-connector";
77		type = "a";
78
79		port {
80			hdmi_con_out: endpoint {
81				remote-endpoint = <&adv7511_out>;
82			};
83		};
84	};
85
86	lvds-decoder {
87		compatible = "thine,thc63lvd1024";
88		vcc-supply = <&reg_3p3v>;
89
90		ports {
91			#address-cells = <1>;
92			#size-cells = <0>;
93
94			port@0 {
95				reg = <0>;
96				thc63lvd1024_in: endpoint {
97					remote-endpoint = <&lvds0_out>;
98				};
99			};
100
101			port@2 {
102				reg = <2>;
103				thc63lvd1024_out: endpoint {
104					remote-endpoint = <&adv7511_in>;
105				};
106			};
107		};
108	};
109
110	vga {
111		compatible = "vga-connector";
112
113		port {
114			vga_in: endpoint {
115				remote-endpoint = <&adv7123_out>;
116			};
117		};
118	};
119
120	vga-encoder {
121		compatible = "adi,adv7123";
122
123		ports {
124			#address-cells = <1>;
125			#size-cells = <0>;
126
127			port@0 {
128				reg = <0>;
129				adv7123_in: endpoint {
130					remote-endpoint = <&du_out_rgb>;
131				};
132			};
133			port@1 {
134				reg = <1>;
135				adv7123_out: endpoint {
136					remote-endpoint = <&vga_in>;
137				};
138			};
139		};
140	};
141
142	reg_1p8v: regulator0 {
143		compatible = "regulator-fixed";
144		regulator-name = "fixed-1.8V";
145		regulator-min-microvolt = <1800000>;
146		regulator-max-microvolt = <1800000>;
147		regulator-boot-on;
148		regulator-always-on;
149	};
150
151	reg_3p3v: regulator1 {
152		compatible = "regulator-fixed";
153		regulator-name = "fixed-3.3V";
154		regulator-min-microvolt = <3300000>;
155		regulator-max-microvolt = <3300000>;
156		regulator-boot-on;
157		regulator-always-on;
158	};
159
160	vbus0_usb2: regulator-vbus0-usb2 {
161		compatible = "regulator-fixed";
162
163		regulator-name = "USB20_VBUS_CN";
164		regulator-min-microvolt = <5000000>;
165		regulator-max-microvolt = <5000000>;
166
167		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
168		enable-active-high;
169	};
170
171	rsnd_ak4613: sound {
172		compatible = "simple-audio-card";
173
174		simple-audio-card,name = "rsnd-ak4613";
175		simple-audio-card,format = "left_j";
176		simple-audio-card,bitclock-master = <&sndcpu>;
177		simple-audio-card,frame-master = <&sndcpu>;
178
179		sndcpu: simple-audio-card,cpu {
180			sound-dai = <&rcar_sound>;
181		};
182
183		sndcodec: simple-audio-card,codec {
184			sound-dai = <&ak4613>;
185		};
186	};
187
188	x12_clk: x12 {
189		compatible = "fixed-clock";
190		#clock-cells = <0>;
191		clock-frequency = <24576000>;
192	};
193
194	reg_12p0v: regulator2 {
195		compatible = "regulator-fixed";
196		regulator-name = "D12.0V";
197		regulator-min-microvolt = <12000000>;
198		regulator-max-microvolt = <12000000>;
199		regulator-boot-on;
200		regulator-always-on;
201	};
202
203	x13_clk: x13 {
204		compatible = "fixed-clock";
205		#clock-cells = <0>;
206		clock-frequency = <74250000>;
207	};
208
209	vcc_sdhi0: regulator-vcc-sdhi0 {
210		compatible = "regulator-fixed";
211
212		regulator-name = "SDHI0 Vcc";
213		regulator-min-microvolt = <3300000>;
214		regulator-max-microvolt = <3300000>;
215
216		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
217		enable-active-high;
218	};
219
220	vccq_sdhi0: regulator-vccq-sdhi0 {
221		compatible = "regulator-gpio";
222
223		regulator-name = "SDHI0 VccQ";
224		regulator-min-microvolt = <1800000>;
225		regulator-max-microvolt = <3300000>;
226
227		gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
228		gpios-states = <1>;
229		states = <3300000 1
230			  1800000 0>;
231	};
232
233	vcc_sdhi1: regulator-vcc-sdhi1 {
234		compatible = "regulator-fixed";
235
236		regulator-name = "SDHI1 Vcc";
237		regulator-min-microvolt = <3300000>;
238		regulator-max-microvolt = <3300000>;
239
240		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
241		enable-active-high;
242	};
243
244	vccq_sdhi1: regulator-vccq-sdhi1 {
245		compatible = "regulator-gpio";
246
247		regulator-name = "SDHI1 VccQ";
248		regulator-min-microvolt = <1800000>;
249		regulator-max-microvolt = <3300000>;
250
251		gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
252		gpios-states = <1>;
253		states = <3300000 1
254			  1800000 0>;
255	};
256};
257
258&audio_clk_a {
259	clock-frequency = <22579200>;
260};
261
262&avb {
263	pinctrl-0 = <&avb_pins>;
264	pinctrl-names = "default";
265	renesas,no-ether-link;
266	phy-handle = <&phy0>;
267	status = "okay";
268
269	phy0: ethernet-phy@0 {
270		rxc-skew-ps = <1500>;
271		reg = <0>;
272		interrupt-parent = <&gpio2>;
273		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
274		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
275	};
276};
277
278&canfd {
279	pinctrl-0 = <&canfd0_pins>;
280	pinctrl-names = "default";
281	status = "okay";
282
283	channel0 {
284		status = "okay";
285	};
286};
287
288&csi40 {
289	status = "okay";
290
291	ports {
292		port@0 {
293			reg = <0>;
294
295			csi40_in: endpoint {
296				clock-lanes = <0>;
297				data-lanes = <1 2>;
298				remote-endpoint = <&adv7482_txa>;
299			};
300		};
301	};
302};
303
304&du {
305	pinctrl-0 = <&du_pins>;
306	pinctrl-names = "default";
307	status = "okay";
308
309	clocks = <&cpg CPG_MOD 724>,
310		 <&cpg CPG_MOD 723>,
311		 <&x13_clk>;
312	clock-names = "du.0", "du.1", "dclkin.0";
313
314	ports {
315		port@0 {
316			endpoint {
317				remote-endpoint = <&adv7123_in>;
318			};
319		};
320	};
321};
322
323&ehci0 {
324	dr_mode = "otg";
325	status = "okay";
326};
327
328&extal_clk {
329	clock-frequency = <48000000>;
330};
331
332&hsusb {
333	dr_mode = "otg";
334	status = "okay";
335};
336
337&i2c0 {
338	status = "okay";
339
340	hdmi-encoder@39 {
341		compatible = "adi,adv7511w";
342		reg = <0x39>;
343		interrupt-parent = <&gpio1>;
344		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
345
346		adi,input-depth = <8>;
347		adi,input-colorspace = "rgb";
348		adi,input-clock = "1x";
349		adi,input-style = <1>;
350		adi,input-justification = "evenly";
351
352		ports {
353			#address-cells = <1>;
354			#size-cells = <0>;
355
356			port@0 {
357				reg = <0>;
358				adv7511_in: endpoint {
359					remote-endpoint = <&thc63lvd1024_out>;
360				};
361			};
362
363			port@1 {
364				reg = <1>;
365				adv7511_out: endpoint {
366					remote-endpoint = <&hdmi_con_out>;
367				};
368			};
369		};
370	};
371
372	video-receiver@70 {
373		compatible = "adi,adv7482";
374		reg = <0x70>;
375
376		#address-cells = <1>;
377		#size-cells = <0>;
378
379		interrupt-parent = <&gpio0>;
380		interrupt-names = "intrq1", "intrq2";
381		interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
382			     <17 IRQ_TYPE_LEVEL_LOW>;
383
384		port@7 {
385			reg = <7>;
386
387			adv7482_ain7: endpoint {
388				remote-endpoint = <&cvbs_con>;
389			};
390		};
391
392		port@8 {
393			reg = <8>;
394
395			adv7482_hdmi: endpoint {
396				remote-endpoint = <&hdmi_in_con>;
397			};
398		};
399
400		port@a {
401			reg = <0xa>;
402
403			adv7482_txa: endpoint {
404				clock-lanes = <0>;
405				data-lanes = <1 2>;
406				remote-endpoint = <&csi40_in>;
407			};
408		};
409	};
410};
411
412&i2c3 {
413	status = "okay";
414
415	ak4613: codec@10 {
416		compatible = "asahi-kasei,ak4613";
417		#sound-dai-cells = <0>;
418		reg = <0x10>;
419		clocks = <&rcar_sound 3>;
420
421		asahi-kasei,in1-single-end;
422		asahi-kasei,in2-single-end;
423		asahi-kasei,out1-single-end;
424		asahi-kasei,out2-single-end;
425		asahi-kasei,out3-single-end;
426		asahi-kasei,out4-single-end;
427		asahi-kasei,out5-single-end;
428		asahi-kasei,out6-single-end;
429	};
430
431	cs2000: clk-multiplier@4f {
432		#clock-cells = <0>;
433		compatible = "cirrus,cs2000-cp";
434		reg = <0x4f>;
435		clocks = <&audio_clkout>, <&x12_clk>;
436		clock-names = "clk_in", "ref_clk";
437
438		assigned-clocks = <&cs2000>;
439		assigned-clock-rates = <24576000>; /* 1/1 divide */
440	};
441};
442
443&lvds0 {
444	status = "okay";
445
446	clocks = <&cpg CPG_MOD 727>,
447		 <&x13_clk>,
448		 <&extal_clk>;
449	clock-names = "fck", "dclkin.0", "extal";
450
451	ports {
452		port@1 {
453			lvds0_out: endpoint {
454				remote-endpoint = <&thc63lvd1024_in>;
455			};
456		};
457	};
458};
459
460&lvds1 {
461	clocks = <&cpg CPG_MOD 727>,
462		 <&x13_clk>,
463		 <&extal_clk>;
464	clock-names = "fck", "dclkin.0", "extal";
465};
466
467&ohci0 {
468	dr_mode = "otg";
469	status = "okay";
470};
471
472&pcie_bus_clk {
473	clock-frequency = <100000000>;
474};
475
476&pciec0 {
477	status = "okay";
478};
479
480&pfc {
481	avb_pins: avb {
482		mux {
483			groups = "avb_link", "avb_mii";
484			function = "avb";
485		};
486	};
487
488	canfd0_pins: canfd0 {
489		groups = "canfd0_data";
490		function = "canfd0";
491	};
492
493	du_pins: du {
494		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
495		function = "du";
496	};
497
498	pwm3_pins: pwm3 {
499		groups = "pwm3_b";
500		function = "pwm3";
501	};
502
503	pwm5_pins: pwm5 {
504		groups = "pwm5_a";
505		function = "pwm5";
506	};
507
508	sdhi0_pins: sd0 {
509		groups = "sdhi0_data4", "sdhi0_ctrl";
510		function = "sdhi0";
511		power-source = <3300>;
512	};
513
514	sdhi0_pins_uhs: sd0_uhs {
515		groups = "sdhi0_data4", "sdhi0_ctrl";
516		function = "sdhi0";
517		power-source = <1800>;
518	};
519
520	sdhi1_pins: sd1 {
521		groups = "sdhi1_data4", "sdhi1_ctrl";
522		function = "sdhi1";
523		power-source = <3300>;
524	};
525
526	sdhi1_pins_uhs: sd1_uhs {
527		groups = "sdhi1_data4", "sdhi1_ctrl";
528		function = "sdhi1";
529		power-source = <1800>;
530	};
531
532	sdhi3_pins: sd3 {
533		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
534		function = "sdhi3";
535		power-source = <1800>;
536	};
537
538	sound_pins: sound {
539		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
540		function = "ssi";
541	};
542
543	sound_clk_pins: sound_clk {
544		groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
545			 "audio_clkout_a", "audio_clkout1_a";
546		function = "audio_clk";
547	};
548
549	scif2_pins: scif2 {
550		groups = "scif2_data_a";
551		function = "scif2";
552	};
553
554	usb0_pins: usb {
555		groups = "usb0_b", "usb0_id";
556		function = "usb0";
557	};
558
559	usb30_pins: usb30 {
560		groups = "usb30";
561		function = "usb30";
562	};
563};
564
565&pwm3 {
566	pinctrl-0 = <&pwm3_pins>;
567	pinctrl-names = "default";
568
569	status = "okay";
570};
571
572&pwm5 {
573	pinctrl-0 = <&pwm5_pins>;
574	pinctrl-names = "default";
575
576	status = "okay";
577};
578
579&rcar_sound {
580	pinctrl-0 = <&sound_pins &sound_clk_pins>;
581	pinctrl-names = "default";
582
583	/* Single DAI */
584	#sound-dai-cells = <0>;
585
586	/* audio_clkout0/1/2/3 */
587	#clock-cells = <1>;
588	clock-frequency = <12288000 11289600>;
589	clkout-lr-synchronous;
590
591	status = "okay";
592
593	/* update <audio_clk_b> to <cs2000> */
594	clocks = <&cpg CPG_MOD 1005>,
595		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
596		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
597		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
598		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
599		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
600		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
601		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
602		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
603		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
604		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
605		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
606		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
607		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
608		 <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
609		 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
610
611	rcar_sound,dai {
612		dai0 {
613			playback = <&ssi0 &src0 &dvc0>;
614			capture  = <&ssi1 &src1 &dvc1>;
615		};
616	};
617
618};
619
620&rwdt {
621	timeout-sec = <60>;
622	status = "okay";
623};
624
625&scif2 {
626	pinctrl-0 = <&scif2_pins>;
627	pinctrl-names = "default";
628
629	status = "okay";
630};
631
632&ssi1 {
633	shared-pin;
634};
635
636&usb2_phy0 {
637	pinctrl-0 = <&usb0_pins>;
638	pinctrl-names = "default";
639
640	vbus-supply = <&vbus0_usb2>;
641	status = "okay";
642};
643
644&usb3_peri0 {
645	companion = <&xhci0>;
646	status = "okay";
647};
648
649&vin4 {
650	status = "okay";
651};
652
653&xhci0 {
654	pinctrl-0 = <&usb30_pins>;
655	pinctrl-names = "default";
656
657	status = "okay";
658};
659
660&sdhi0 {
661	pinctrl-0 = <&sdhi0_pins>;
662	pinctrl-1 = <&sdhi0_pins_uhs>;
663	pinctrl-names = "default", "state_uhs";
664
665	vmmc-supply = <&vcc_sdhi0>;
666	vqmmc-supply = <&vccq_sdhi0>;
667	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
668	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
669	bus-width = <4>;
670	sd-uhs-sdr50;
671	sd-uhs-sdr104;
672	status = "okay";
673};
674
675&sdhi1 {
676	pinctrl-0 = <&sdhi1_pins>;
677	pinctrl-1 = <&sdhi1_pins_uhs>;
678	pinctrl-names = "default", "state_uhs";
679
680	vmmc-supply = <&vcc_sdhi1>;
681	vqmmc-supply = <&vccq_sdhi1>;
682	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
683	bus-width = <4>;
684	sd-uhs-sdr50;
685	sd-uhs-sdr104;
686	status = "okay";
687};
688
689&sdhi3 {
690	/* used for on-board 8bit eMMC */
691	pinctrl-0 = <&sdhi3_pins>;
692	pinctrl-1 = <&sdhi3_pins>;
693	pinctrl-names = "default", "state_uhs";
694
695	vmmc-supply = <&reg_3p3v>;
696	vqmmc-supply = <&reg_1p8v>;
697	mmc-hs200-1_8v;
698	mmc-hs400-1_8v;
699	bus-width = <8>;
700	non-removable;
701	status = "okay";
702};
703