xref: /linux/arch/arm64/boot/dts/renesas/ebisu.dtsi (revision 747bbcd3aacd95fe200cdda415dba02e872946b5) 
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the Ebisu board
4 *
5 * Copyright (C) 2018 Renesas Electronics Corp.
6 */
7
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/input/input.h>
10
11/ {
12	model = "Renesas Ebisu board";
13	compatible = "renesas,ebisu";
14
15	aliases {
16		serial0 = &scif2;
17		ethernet0 = &avb;
18		mmc0 = &sdhi3;
19		mmc1 = &sdhi0;
20		mmc2 = &sdhi1;
21	};
22
23	chosen {
24		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
25		stdout-path = "serial0:115200n8";
26	};
27
28	audio_clkout: audio-clkout {
29		/*
30		 * This is same as <&rcar_sound 0>
31		 * but needed to avoid cs2000/rcar_sound probe dead-lock
32		 */
33		compatible = "fixed-clock";
34		#clock-cells = <0>;
35		clock-frequency = <11289600>;
36	};
37
38	backlight: backlight {
39		compatible = "pwm-backlight";
40		pwms = <&pwm3 0 50000>;
41
42		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
43		default-brightness-level = <10>;
44
45		power-supply = <&reg_12p0v>;
46	};
47
48	cvbs-in {
49		compatible = "composite-video-connector";
50		label = "CVBS IN";
51
52		port {
53			cvbs_con: endpoint {
54				remote-endpoint = <&adv7482_ain7>;
55			};
56		};
57	};
58
59	hdmi-in {
60		compatible = "hdmi-connector";
61		label = "HDMI IN";
62		type = "a";
63
64		port {
65			hdmi_in_con: endpoint {
66				remote-endpoint = <&adv7482_hdmi>;
67			};
68		};
69	};
70
71	hdmi-out {
72		compatible = "hdmi-connector";
73		type = "a";
74
75		port {
76			hdmi_con_out: endpoint {
77				remote-endpoint = <&adv7511_out>;
78			};
79		};
80	};
81
82	keys {
83		compatible = "gpio-keys";
84
85		pinctrl-0 = <&keys_pins>;
86		pinctrl-names = "default";
87
88		key-1 {
89			gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
90			linux,code = <KEY_1>;
91			label = "SW4-1";
92			wakeup-source;
93			debounce-interval = <20>;
94		};
95		key-2 {
96			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
97			linux,code = <KEY_2>;
98			label = "SW4-2";
99			wakeup-source;
100			debounce-interval = <20>;
101		};
102		key-3 {
103			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
104			linux,code = <KEY_3>;
105			label = "SW4-3";
106			wakeup-source;
107			debounce-interval = <20>;
108		};
109		key-4 {
110			gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
111			linux,code = <KEY_4>;
112			label = "SW4-4";
113			wakeup-source;
114			debounce-interval = <20>;
115		};
116	};
117
118	lvds-decoder {
119		compatible = "thine,thc63lvd1024";
120		vcc-supply = <&reg_3p3v>;
121
122		ports {
123			#address-cells = <1>;
124			#size-cells = <0>;
125
126			port@0 {
127				reg = <0>;
128				thc63lvd1024_in: endpoint {
129					remote-endpoint = <&lvds0_out>;
130				};
131			};
132
133			port@2 {
134				reg = <2>;
135				thc63lvd1024_out: endpoint {
136					remote-endpoint = <&adv7511_in>;
137				};
138			};
139		};
140	};
141
142	memory@48000000 {
143		device_type = "memory";
144		/* first 128MB is reserved for secure area. */
145		reg = <0x0 0x48000000 0x0 0x38000000>;
146	};
147
148	reg_1p8v: regulator0 {
149		compatible = "regulator-fixed";
150		regulator-name = "fixed-1.8V";
151		regulator-min-microvolt = <1800000>;
152		regulator-max-microvolt = <1800000>;
153		regulator-boot-on;
154		regulator-always-on;
155	};
156
157	reg_3p3v: regulator1 {
158		compatible = "regulator-fixed";
159		regulator-name = "fixed-3.3V";
160		regulator-min-microvolt = <3300000>;
161		regulator-max-microvolt = <3300000>;
162		regulator-boot-on;
163		regulator-always-on;
164	};
165
166	reg_12p0v: regulator2 {
167		compatible = "regulator-fixed";
168		regulator-name = "D12.0V";
169		regulator-min-microvolt = <12000000>;
170		regulator-max-microvolt = <12000000>;
171		regulator-boot-on;
172		regulator-always-on;
173	};
174
175	rsnd_ak4613: sound {
176		compatible = "simple-audio-card";
177
178		simple-audio-card,name = "rsnd-ak4613";
179		simple-audio-card,format = "left_j";
180		simple-audio-card,bitclock-master = <&sndcpu>;
181		simple-audio-card,frame-master = <&sndcpu>;
182
183		sndcodec: simple-audio-card,codec {
184			sound-dai = <&ak4613>;
185		};
186
187		sndcpu: simple-audio-card,cpu {
188			sound-dai = <&rcar_sound>;
189		};
190	};
191
192	vbus0_usb2: regulator-vbus0-usb2 {
193		compatible = "regulator-fixed";
194
195		regulator-name = "USB20_VBUS_CN";
196		regulator-min-microvolt = <5000000>;
197		regulator-max-microvolt = <5000000>;
198
199		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
200		enable-active-high;
201	};
202
203	vcc_sdhi0: regulator-vcc-sdhi0 {
204		compatible = "regulator-fixed";
205
206		regulator-name = "SDHI0 Vcc";
207		regulator-min-microvolt = <3300000>;
208		regulator-max-microvolt = <3300000>;
209
210		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
211		enable-active-high;
212	};
213
214	vccq_sdhi0: regulator-vccq-sdhi0 {
215		compatible = "regulator-gpio";
216
217		regulator-name = "SDHI0 VccQ";
218		regulator-min-microvolt = <1800000>;
219		regulator-max-microvolt = <3300000>;
220
221		gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
222		gpios-states = <1>;
223		states = <3300000 1>, <1800000 0>;
224	};
225
226	vcc_sdhi1: regulator-vcc-sdhi1 {
227		compatible = "regulator-fixed";
228
229		regulator-name = "SDHI1 Vcc";
230		regulator-min-microvolt = <3300000>;
231		regulator-max-microvolt = <3300000>;
232
233		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
234		enable-active-high;
235	};
236
237	vccq_sdhi1: regulator-vccq-sdhi1 {
238		compatible = "regulator-gpio";
239
240		regulator-name = "SDHI1 VccQ";
241		regulator-min-microvolt = <1800000>;
242		regulator-max-microvolt = <3300000>;
243
244		gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
245		gpios-states = <1>;
246		states = <3300000 1>, <1800000 0>;
247	};
248
249	vga {
250		compatible = "vga-connector";
251
252		port {
253			vga_in: endpoint {
254				remote-endpoint = <&adv7123_out>;
255			};
256		};
257	};
258
259	vga-encoder {
260		compatible = "adi,adv7123";
261
262		ports {
263			#address-cells = <1>;
264			#size-cells = <0>;
265
266			port@0 {
267				reg = <0>;
268				adv7123_in: endpoint {
269					remote-endpoint = <&du_out_rgb>;
270				};
271			};
272			port@1 {
273				reg = <1>;
274				adv7123_out: endpoint {
275					remote-endpoint = <&vga_in>;
276				};
277			};
278		};
279	};
280
281	x12_clk: x12 {
282		compatible = "fixed-clock";
283		#clock-cells = <0>;
284		clock-frequency = <24576000>;
285	};
286
287	x13_clk: x13 {
288		compatible = "fixed-clock";
289		#clock-cells = <0>;
290		clock-frequency = <74250000>;
291	};
292};
293
294&audio_clk_a {
295	clock-frequency = <22579200>;
296};
297
298&avb {
299	pinctrl-0 = <&avb_pins>;
300	pinctrl-names = "default";
301	phy-handle = <&phy0>;
302	status = "okay";
303
304	phy0: ethernet-phy@0 {
305		compatible = "ethernet-phy-id0022.1622",
306			     "ethernet-phy-ieee802.3-c22";
307		rxc-skew-ps = <1500>;
308		reg = <0>;
309		interrupt-parent = <&gpio2>;
310		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
311		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
312		/*
313		 * TX clock internal delay mode is required for reliable
314		 * 1Gbps communication using the KSZ9031RNX phy present on
315		 * the Ebisu board, however, TX clock internal delay mode
316		 * isn't supported on R-Car E3(e).  Thus, limit speed to
317		 * 100Mbps for reliable communication.
318		 */
319		max-speed = <100>;
320	};
321};
322
323&canfd {
324	pinctrl-0 = <&canfd0_pins>;
325	pinctrl-names = "default";
326	status = "okay";
327
328	channel0 {
329		status = "okay";
330	};
331};
332
333&csi40 {
334	status = "okay";
335
336	ports {
337		port@0 {
338			csi40_in: endpoint {
339				clock-lanes = <0>;
340				data-lanes = <1 2>;
341				remote-endpoint = <&adv7482_txa>;
342			};
343		};
344	};
345};
346
347&du {
348	pinctrl-0 = <&du_pins>;
349	pinctrl-names = "default";
350	status = "okay";
351
352	clocks = <&cpg CPG_MOD 724>,
353		 <&cpg CPG_MOD 723>,
354		 <&x13_clk>;
355	clock-names = "du.0", "du.1", "dclkin.0";
356
357	ports {
358		port@0 {
359			du_out_rgb: endpoint {
360				remote-endpoint = <&adv7123_in>;
361			};
362		};
363	};
364};
365
366&ehci0 {
367	dr_mode = "otg";
368	status = "okay";
369};
370
371&extal_clk {
372	clock-frequency = <48000000>;
373};
374
375&hsusb {
376	dr_mode = "otg";
377	status = "okay";
378};
379
380&i2c0 {
381	status = "okay";
382
383	io_expander: gpio@20 {
384		compatible = "onnn,pca9654";
385		reg = <0x20>;
386		gpio-controller;
387		#gpio-cells = <2>;
388		interrupt-parent = <&gpio2>;
389		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
390	};
391
392	hdmi-encoder@39 {
393		compatible = "adi,adv7511w";
394		reg = <0x39>;
395		interrupt-parent = <&gpio1>;
396		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
397
398		adi,input-depth = <8>;
399		adi,input-colorspace = "rgb";
400		adi,input-clock = "1x";
401
402		ports {
403			#address-cells = <1>;
404			#size-cells = <0>;
405
406			port@0 {
407				reg = <0>;
408				adv7511_in: endpoint {
409					remote-endpoint = <&thc63lvd1024_out>;
410				};
411			};
412
413			port@1 {
414				reg = <1>;
415				adv7511_out: endpoint {
416					remote-endpoint = <&hdmi_con_out>;
417				};
418			};
419		};
420	};
421
422	video-receiver@70 {
423		compatible = "adi,adv7482";
424		reg = <0x70>;
425
426		interrupt-parent = <&gpio0>;
427		interrupt-names = "intrq1", "intrq2";
428		interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
429			     <17 IRQ_TYPE_LEVEL_LOW>;
430
431		ports {
432			#address-cells = <1>;
433			#size-cells = <0>;
434
435			port@7 {
436				reg = <7>;
437
438				adv7482_ain7: endpoint {
439					remote-endpoint = <&cvbs_con>;
440				};
441			};
442
443			port@8 {
444				reg = <8>;
445
446				adv7482_hdmi: endpoint {
447					remote-endpoint = <&hdmi_in_con>;
448				};
449			};
450
451			port@a {
452				reg = <10>;
453
454				adv7482_txa: endpoint {
455					clock-lanes = <0>;
456					data-lanes = <1 2>;
457					remote-endpoint = <&csi40_in>;
458				};
459			};
460		};
461	};
462};
463
464&i2c3 {
465	status = "okay";
466
467	ak4613: codec@10 {
468		compatible = "asahi-kasei,ak4613";
469		#sound-dai-cells = <0>;
470		reg = <0x10>;
471		clocks = <&rcar_sound 3>;
472
473		asahi-kasei,in1-single-end;
474		asahi-kasei,in2-single-end;
475		asahi-kasei,out1-single-end;
476		asahi-kasei,out2-single-end;
477		asahi-kasei,out3-single-end;
478		asahi-kasei,out4-single-end;
479		asahi-kasei,out5-single-end;
480		asahi-kasei,out6-single-end;
481	};
482
483	cs2000: clk-multiplier@4f {
484		#clock-cells = <0>;
485		compatible = "cirrus,cs2000-cp";
486		reg = <0x4f>;
487		clocks = <&audio_clkout>, <&x12_clk>;
488		clock-names = "clk_in", "ref_clk";
489
490		assigned-clocks = <&cs2000>;
491		assigned-clock-rates = <24576000>; /* 1/1 divide */
492	};
493};
494
495&i2c_dvfs {
496	status = "okay";
497
498	clock-frequency = <400000>;
499
500	pmic: pmic@30 {
501		pinctrl-0 = <&irq0_pins>;
502		pinctrl-names = "default";
503
504		compatible = "rohm,bd9571mwv";
505		reg = <0x30>;
506		interrupt-parent = <&intc_ex>;
507		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
508		interrupt-controller;
509		#interrupt-cells = <2>;
510		gpio-controller;
511		#gpio-cells = <2>;
512		rohm,ddr-backup-power = <0x1>;
513		rohm,rstbmode-level;
514	};
515
516	eeprom@50 {
517		compatible = "rohm,br24t01", "atmel,24c01";
518		reg = <0x50>;
519		pagesize = <8>;
520	};
521};
522
523&lvds0 {
524	status = "okay";
525
526	clocks = <&cpg CPG_MOD 727>,
527		 <&x13_clk>,
528		 <&extal_clk>;
529	clock-names = "fck", "dclkin.0", "extal";
530
531	ports {
532		port@1 {
533			lvds0_out: endpoint {
534				remote-endpoint = <&thc63lvd1024_in>;
535			};
536		};
537	};
538};
539
540&lvds1 {
541	/*
542	 * Even though the LVDS1 output is not connected, the encoder must be
543	 * enabled to supply a pixel clock to the DU for the DPAD output when
544	 * LVDS0 is in use.
545	 */
546	status = "okay";
547
548	clocks = <&cpg CPG_MOD 727>,
549		 <&x13_clk>,
550		 <&extal_clk>;
551	clock-names = "fck", "dclkin.0", "extal";
552};
553
554&ohci0 {
555	dr_mode = "otg";
556	status = "okay";
557};
558
559&pcie_bus_clk {
560	clock-frequency = <100000000>;
561};
562
563&pciec0 {
564	status = "okay";
565};
566
567&pfc {
568	avb_pins: avb {
569		groups = "avb_link", "avb_mii";
570		function = "avb";
571	};
572
573	canfd0_pins: canfd0 {
574		groups = "canfd0_data";
575		function = "canfd0";
576	};
577
578	du_pins: du {
579		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
580		function = "du";
581	};
582
583	irq0_pins: irq0 {
584		groups = "intc_ex_irq0";
585		function = "intc_ex";
586	};
587
588	keys_pins: keys {
589		pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13";
590		bias-pull-up;
591	};
592
593	pwm3_pins: pwm3 {
594		groups = "pwm3_b";
595		function = "pwm3";
596	};
597
598	pwm5_pins: pwm5 {
599		groups = "pwm5_a";
600		function = "pwm5";
601	};
602
603	rpc_pins: rpc {
604		groups = "rpc_clk2", "rpc_ctrl", "rpc_data", "rpc_reset",
605			 "rpc_int";
606		function = "rpc";
607	};
608
609	scif2_pins: scif2 {
610		groups = "scif2_data_a";
611		function = "scif2";
612	};
613
614	sdhi0_pins: sd0 {
615		groups = "sdhi0_data4", "sdhi0_ctrl";
616		function = "sdhi0";
617		power-source = <3300>;
618	};
619
620	sdhi0_pins_uhs: sd0_uhs {
621		groups = "sdhi0_data4", "sdhi0_ctrl";
622		function = "sdhi0";
623		power-source = <1800>;
624	};
625
626	sdhi1_pins: sd1 {
627		groups = "sdhi1_data4", "sdhi1_ctrl";
628		function = "sdhi1";
629		power-source = <3300>;
630	};
631
632	sdhi1_pins_uhs: sd1_uhs {
633		groups = "sdhi1_data4", "sdhi1_ctrl";
634		function = "sdhi1";
635		power-source = <1800>;
636	};
637
638	sdhi3_pins: sd3 {
639		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
640		function = "sdhi3";
641		power-source = <1800>;
642	};
643
644	sound_clk_pins: sound_clk {
645		groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
646			 "audio_clkout_a", "audio_clkout1_a";
647		function = "audio_clk";
648	};
649
650	sound_pins: sound {
651		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
652		function = "ssi";
653	};
654
655	usb0_pins: usb {
656		groups = "usb0_b", "usb0_id";
657		function = "usb0";
658	};
659
660	usb30_pins: usb30 {
661		groups = "usb30";
662		function = "usb30";
663	};
664};
665
666&pwm3 {
667	pinctrl-0 = <&pwm3_pins>;
668	pinctrl-names = "default";
669
670	status = "okay";
671};
672
673&pwm5 {
674	pinctrl-0 = <&pwm5_pins>;
675	pinctrl-names = "default";
676
677	status = "okay";
678};
679
680&rcar_sound {
681	pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
682	pinctrl-names = "default";
683
684	/* Single DAI */
685	#sound-dai-cells = <0>;
686
687	/* audio_clkout0/1/2/3 */
688	#clock-cells = <1>;
689	clock-frequency = <12288000 11289600>;
690
691	status = "okay";
692
693	/* update <audio_clk_b> to <cs2000> */
694	clocks = <&cpg CPG_MOD 1005>,
695		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
696		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
697		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
698		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
699		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
700		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
701		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
702		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
703		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
704		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
705		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
706		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
707		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
708		 <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
709		 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
710
711	rcar_sound,dai {
712		dai0 {
713			playback = <&ssi0>, <&src0>, <&dvc0>;
714			capture  = <&ssi1>, <&src1>, <&dvc1>;
715		};
716	};
717
718};
719
720&rpc {
721	pinctrl-0 = <&rpc_pins>;
722	pinctrl-names = "default";
723
724	/* Left disabled.  To be enabled by firmware when unlocked. */
725
726	flash@0 {
727		compatible = "cypress,hyperflash", "cfi-flash";
728		reg = <0>;
729
730		partitions {
731			compatible = "fixed-partitions";
732			#address-cells = <1>;
733			#size-cells = <1>;
734
735			bootparam@0 {
736				reg = <0x00000000 0x040000>;
737				read-only;
738			};
739			bl2@40000 {
740				reg = <0x00040000 0x140000>;
741				read-only;
742			};
743			cert_header_sa6@180000 {
744				reg = <0x00180000 0x040000>;
745				read-only;
746			};
747			bl31@1c0000 {
748				reg = <0x001c0000 0x040000>;
749				read-only;
750			};
751			tee@200000 {
752				reg = <0x00200000 0x440000>;
753				read-only;
754			};
755			uboot@640000 {
756				reg = <0x00640000 0x100000>;
757				read-only;
758			};
759			dtb@740000 {
760				reg = <0x00740000 0x080000>;
761			};
762			kernel@7c0000 {
763				reg = <0x007c0000 0x1400000>;
764			};
765			user@1bc0000 {
766				reg = <0x01bc0000 0x2440000>;
767			};
768		};
769	};
770};
771
772&rwdt {
773	timeout-sec = <60>;
774	status = "okay";
775};
776
777&scif2 {
778	pinctrl-0 = <&scif2_pins>;
779	pinctrl-names = "default";
780
781	status = "okay";
782};
783
784&sdhi0 {
785	pinctrl-0 = <&sdhi0_pins>;
786	pinctrl-1 = <&sdhi0_pins_uhs>;
787	pinctrl-names = "default", "state_uhs";
788
789	vmmc-supply = <&vcc_sdhi0>;
790	vqmmc-supply = <&vccq_sdhi0>;
791	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
792	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
793	bus-width = <4>;
794	sd-uhs-sdr50;
795	sd-uhs-sdr104;
796	status = "okay";
797};
798
799&sdhi1 {
800	pinctrl-0 = <&sdhi1_pins>;
801	pinctrl-1 = <&sdhi1_pins_uhs>;
802	pinctrl-names = "default", "state_uhs";
803
804	vmmc-supply = <&vcc_sdhi1>;
805	vqmmc-supply = <&vccq_sdhi1>;
806	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
807	bus-width = <4>;
808	sd-uhs-sdr50;
809	sd-uhs-sdr104;
810	status = "okay";
811};
812
813&sdhi3 {
814	/* used for on-board 8bit eMMC */
815	pinctrl-0 = <&sdhi3_pins>;
816	pinctrl-1 = <&sdhi3_pins>;
817	pinctrl-names = "default", "state_uhs";
818
819	vmmc-supply = <&reg_3p3v>;
820	vqmmc-supply = <&reg_1p8v>;
821	mmc-hs200-1_8v;
822	mmc-hs400-1_8v;
823	bus-width = <8>;
824	no-sd;
825	no-sdio;
826	non-removable;
827	full-pwr-cycle-in-suspend;
828	status = "okay";
829};
830
831&ssi1 {
832	shared-pin;
833};
834
835&usb2_phy0 {
836	pinctrl-0 = <&usb0_pins>;
837	pinctrl-names = "default";
838
839	vbus-supply = <&vbus0_usb2>;
840	status = "okay";
841};
842
843&usb3_peri0 {
844	companion = <&xhci0>;
845	status = "okay";
846};
847
848&vin4 {
849	status = "okay";
850};
851
852&vin5 {
853	status = "okay";
854};
855
856&xhci0 {
857	pinctrl-0 = <&usb30_pins>;
858	pinctrl-names = "default";
859
860	status = "okay";
861};
862