xref: /linux/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi (revision 9a87ffc99ec8eb8d35eed7c4f816d75f5cc9662e) 
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright 2020, Compass Electronics Group, LLC
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/clock/versaclock.h>
8
9/ {
10	memory@48000000 {
11		device_type = "memory";
12		/* first 128MB is reserved for secure area. */
13		reg = <0x0 0x48000000 0x0 0x78000000>;
14	};
15
16	osc_32k: osc_32k {
17		compatible = "fixed-clock";
18		#clock-cells = <0>;
19		clock-frequency = <32768>;
20		clock-output-names = "osc_32k";
21	};
22
23	reg_1p8v: regulator-1p8v {
24		compatible = "regulator-fixed";
25		regulator-name = "fixed-1.8V";
26		regulator-min-microvolt = <1800000>;
27		regulator-max-microvolt = <1800000>;
28		regulator-boot-on;
29		regulator-always-on;
30	};
31
32	reg_3p3v: regulator-3p3v {
33		compatible = "regulator-fixed";
34		regulator-name = "fixed-3.3V";
35		regulator-min-microvolt = <3300000>;
36		regulator-max-microvolt = <3300000>;
37		regulator-boot-on;
38		regulator-always-on;
39	};
40
41	wlan_pwrseq: wlan_pwrseq {
42		compatible = "mmc-pwrseq-simple";
43		reset-gpios = <&pca9654 1 GPIO_ACTIVE_LOW>;
44		clocks = <&osc_32k>;
45		clock-names = "ext_clock";
46		post-power-on-delay-ms = <80>;
47	};
48};
49
50&avb {
51	pinctrl-0 = <&avb_pins>;
52	pinctrl-names = "default";
53	phy-mode = "rgmii-rxid";
54	phy-handle = <&phy0>;
55	rx-internal-delay-ps = <1800>;
56	tx-internal-delay-ps = <2000>;
57	clocks = <&cpg CPG_MOD 812>, <&versaclock5 4>;
58	clock-names = "fck", "refclk";
59	status = "okay";
60
61	phy0: ethernet-phy@0 {
62		compatible = "ethernet-phy-id0022.1640",
63			     "ethernet-phy-ieee802.3-c22";
64		reg = <0>;
65		interrupt-parent = <&gpio2>;
66		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
67		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
68	};
69};
70
71&extal_clk {
72	clock-frequency = <16666666>;
73};
74
75&extalr_clk {
76	clock-frequency = <32768>;
77};
78
79&gpio6 {
80	usb-hub-reset-hog {
81		gpio-hog;
82		gpios = <10 GPIO_ACTIVE_HIGH>;
83		output-high;
84		line-name = "usb-hub-reset";
85	};
86};
87
88&hscif0 {
89	pinctrl-0 = <&hscif0_pins>;
90	pinctrl-names = "default";
91	uart-has-rtscts;
92	status = "okay";
93
94	bluetooth {
95		compatible = "brcm,bcm43438-bt";
96		shutdown-gpios = <&pca9654 2 GPIO_ACTIVE_HIGH>;
97		host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
98		device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>;
99		clocks = <&osc_32k>;
100		clock-names = "extclk";
101		max-speed = <4000000>;
102	};
103};
104
105&hscif2 {
106	status = "okay";
107	pinctrl-0 = <&hscif2_pins>;
108	pinctrl-names = "default";
109};
110
111&i2c4 {
112	status = "okay";
113	clock-frequency = <100000>;
114
115	pca9654: gpio@20 {
116		compatible = "onnn,pca9654";
117		reg = <0x20>;
118		gpio-controller;
119		#gpio-cells = <2>;
120		gpio-line-names =
121			"i2c4_20_0",
122			"wl_reg_on",
123			"bt_reg_on",
124			"i2c4_20_3",
125			"i2c4_20_4",
126			"bt_dev_wake",
127			"i2c4_20_6",
128			"i2c4_20_7";
129	};
130
131	pca9654_lte: gpio@21 {
132		compatible = "onnn,pca9654";
133		reg = <0x21>;
134		interrupt-parent = <&gpio5>;
135		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
136		interrupt-controller;
137		#interrupt-cells = <2>;
138		gpio-controller;
139		#gpio-cells = <2>;
140		gpio-line-names =
141			"i2c4_21_0",
142			"zoe_pwr_on",
143			"zoe_extint",
144			"zoe_reset_n",
145			"sara_reset",
146			"i2c4_21_5",
147			"sara_pwr_off",
148			"sara_networking_status";
149	};
150
151	eeprom@50 {
152		compatible = "microchip,24c64", "atmel,24c64";
153		pagesize = <32>;
154		read-only;	/* Manufacturing EEPROM programmed at factory */
155		reg = <0x50>;
156	};
157
158	rtc@51 {
159		compatible = "nxp,pcf85263";
160		reg = <0x51>;
161	};
162
163	versaclock5: versaclock_som@6a {
164		compatible = "idt,5p49v6965";
165		reg = <0x6a>;
166		#clock-cells = <1>;
167		clocks = <&x304_clk>;
168		clock-names = "xin";
169		/* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */
170		assigned-clocks = <&versaclock5 1>,
171				   <&versaclock5 2>,
172				   <&versaclock5 3>,
173				   <&versaclock5 4>;
174
175		assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
176
177		OUT1 {
178			idt,mode = <VC5_CMOS>;
179			idt,voltage-microvolt = <1800000>;
180			idt,slew-percent = <100>;
181		};
182
183		OUT2 {
184			idt,mode = <VC5_CMOS>;
185			idt,voltage-microvolt = <1800000>;
186			idt,slew-percent = <100>;
187		};
188
189		OUT3 {
190			idt,mode = <VC5_CMOS>;
191			idt,voltage-microvolt = <1800000>;
192			idt,slew-percent = <100>;
193		};
194
195		OUT4 {
196			idt,mode = <VC5_CMOS>;
197			idt,voltage-microvolt = <3300000>;
198			idt,slew-percent = <100>;
199		};
200	};
201};
202
203&pfc {
204	pinctrl-0 = <&scif_clk_pins>;
205	pinctrl-names = "default";
206
207	avb_pins: avb {
208		mux {
209			groups = "avb_link", "avb_mdio", "avb_mii";
210			function = "avb";
211		};
212
213		pins_mdio {
214			groups = "avb_mdio";
215			drive-strength = <24>;
216		};
217
218		pins_mii_tx {
219			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
220			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
221			drive-strength = <12>;
222		};
223	};
224
225	scif2_pins: scif2 {
226		groups = "scif2_data_a";
227		function = "scif2";
228	};
229
230	hscif0_pins: hscif0 {
231		groups = "hscif0_data", "hscif0_ctrl";
232		function = "hscif0";
233	};
234
235	hscif1_pins: hscif1 {
236		groups = "hscif1_data_a", "hscif1_ctrl_a";
237		function = "hscif1";
238	};
239
240	hscif2_pins: hscif2 {
241		groups = "hscif2_data_a";
242		function = "hscif2";
243	};
244
245	scif0_pins: scif0 {
246		groups = "scif0_data";
247		function = "scif0";
248	};
249
250	scif5_pins: scif5 {
251		groups = "scif5_data_a";
252		function = "scif5";
253	};
254
255	scif_clk_pins: scif_clk {
256		groups = "scif_clk_a";
257		function = "scif_clk";
258	};
259
260	i2c0_pins: i2c0 {
261		groups = "i2c0";
262		function = "i2c0";
263	};
264
265	sdhi2_pins: sd2 {
266		groups = "sdhi2_data4", "sdhi2_ctrl";
267		function = "sdhi2";
268		power-source = <1800>;
269	};
270
271	sdhi3_pins: sd3 {
272		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
273		function = "sdhi3";
274		power-source = <1800>;
275	};
276};
277
278&scif_clk {
279	clock-frequency = <14745600>;
280};
281
282&scif2 {
283	pinctrl-0 = <&scif2_pins>;
284	pinctrl-names = "default";
285	status = "okay";
286};
287
288&sdhi2 {
289	pinctrl-names = "default";
290	pinctrl-0 = <&sdhi2_pins>;
291	bus-width = <4>;
292	vmmc-supply = <&reg_3p3v>;
293	vqmmc-supply = <&reg_1p8v>;
294	non-removable;
295	cap-power-off-card;
296	keep-power-in-suspend;
297	mmc-pwrseq = <&wlan_pwrseq>;
298	status = "okay";
299	#address-cells = <1>;
300	#size-cells = <0>;
301
302	brcmf: bcrmf@1 {
303		reg = <1>;
304		compatible = "brcm,bcm4329-fmac";
305		interrupt-parent = <&gpio1>;
306		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
307		interrupt-names = "host-wake";
308	};
309};
310
311&sdhi3 {
312	pinctrl-0 = <&sdhi3_pins>;
313	pinctrl-1 = <&sdhi3_pins>;
314	pinctrl-names = "default", "state_uhs";
315	vmmc-supply = <&reg_3p3v>;
316	vqmmc-supply = <&reg_1p8v>;
317	bus-width = <8>;
318	mmc-hs200-1_8v;
319	no-sd;
320	no-sdio;
321	non-removable;
322	fixed-emmc-driver-type = <1>;
323	status = "okay";
324};
325
326&usb2_clksel {
327	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
328		  <&versaclock5 3>, <&usb3s0_clk>;
329	status = "okay";
330};
331
332&usb3s0_clk {
333	clock-frequency = <100000000>;
334};
335