1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. 4 */ 5 6#include <dt-bindings/gpio/gpio.h> 7#include <dt-bindings/leds/common.h> 8#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 9 10#include "x1e80100.dtsi" 11#include "x1e80100-pmics.dtsi" 12 13/ { 14 aliases { 15 serial0 = &uart2; 16 i2c0 = &i2c0; 17 i2c3 = &i2c3; 18 i2c4 = &i2c4; 19 i2c5 = &i2c5; 20 i2c7 = &i2c7; 21 }; 22 23 backlight: backlight { 24 compatible = "pwm-backlight"; 25 pwms = <&pmk8550_pwm 0 5000000>; 26 enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>; 27 /* TODO: power-supply? */ 28 29 pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; 30 pinctrl-names = "default"; 31 }; 32 33 leds { 34 compatible = "gpio-leds"; 35 36 pinctrl-names = "default"; 37 pinctrl-0 = <&cam_indicator_en>; 38 39 led-camera-indicator { 40 label = "white:camera-indicator"; 41 function = LED_FUNCTION_INDICATOR; 42 color = <LED_COLOR_ID_WHITE>; 43 gpios = <&tlmm 225 GPIO_ACTIVE_HIGH>; 44 linux,default-trigger = "none"; 45 default-state = "off"; 46 /* Reuse as a panic indicator until we get a "camera on" trigger */ 47 panic-indicator; 48 }; 49 }; 50 51 pmic-glink { 52 compatible = "qcom,x1e80100-pmic-glink", 53 "qcom,sm8550-pmic-glink", 54 "qcom,pmic-glink"; 55 #address-cells = <1>; 56 #size-cells = <0>; 57 orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>, 58 <&tlmm 123 GPIO_ACTIVE_HIGH>; 59 60 /* Left-side rear port */ 61 connector@0 { 62 compatible = "usb-c-connector"; 63 reg = <0>; 64 power-role = "dual"; 65 data-role = "dual"; 66 67 ports { 68 #address-cells = <1>; 69 #size-cells = <0>; 70 71 port@0 { 72 reg = <0>; 73 74 pmic_glink_ss0_hs_in: endpoint { 75 remote-endpoint = <&usb_1_ss0_dwc3_hs>; 76 }; 77 }; 78 79 port@1 { 80 reg = <1>; 81 82 pmic_glink_ss0_ss_in: endpoint { 83 remote-endpoint = <&usb_1_ss0_qmpphy_out>; 84 }; 85 }; 86 }; 87 }; 88 89 /* Left-side front port */ 90 connector@1 { 91 compatible = "usb-c-connector"; 92 reg = <1>; 93 power-role = "dual"; 94 data-role = "dual"; 95 96 ports { 97 #address-cells = <1>; 98 #size-cells = <0>; 99 100 port@0 { 101 reg = <0>; 102 103 pmic_glink_ss1_hs_in: endpoint { 104 remote-endpoint = <&usb_1_ss1_dwc3_hs>; 105 }; 106 }; 107 108 port@1 { 109 reg = <1>; 110 111 pmic_glink_ss1_ss_in: endpoint { 112 remote-endpoint = <&usb_1_ss1_qmpphy_out>; 113 }; 114 }; 115 }; 116 }; 117 }; 118 119 reserved-memory { 120 linux,cma { 121 compatible = "shared-dma-pool"; 122 size = <0x0 0x8000000>; 123 reusable; 124 linux,cma-default; 125 }; 126 }; 127 128 vph_pwr: vph-pwr-regulator { 129 compatible = "regulator-fixed"; 130 131 regulator-name = "vph_pwr"; 132 regulator-min-microvolt = <3700000>; 133 regulator-max-microvolt = <3700000>; 134 135 regulator-always-on; 136 regulator-boot-on; 137 }; 138 139 vreg_edp_3p3: regulator-edp-3p3 { 140 compatible = "regulator-fixed"; 141 142 regulator-name = "VREG_EDP_3P3"; 143 regulator-min-microvolt = <3300000>; 144 regulator-max-microvolt = <3300000>; 145 146 gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; 147 enable-active-high; 148 149 pinctrl-0 = <&edp_reg_en>; 150 pinctrl-names = "default"; 151 152 regulator-boot-on; 153 }; 154 155 vreg_nvme: regulator-nvme { 156 compatible = "regulator-fixed"; 157 158 regulator-name = "VREG_NVME_3P3"; 159 regulator-min-microvolt = <3300000>; 160 regulator-max-microvolt = <3300000>; 161 162 gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>; 163 enable-active-high; 164 165 pinctrl-0 = <&nvme_reg_en>; 166 pinctrl-names = "default"; 167 }; 168}; 169 170&apps_rsc { 171 regulators-0 { 172 compatible = "qcom,pm8550-rpmh-regulators"; 173 qcom,pmic-id = "b"; 174 175 vdd-bob1-supply = <&vph_pwr>; 176 vdd-bob2-supply = <&vph_pwr>; 177 vdd-l1-l4-l10-supply = <&vreg_s4c>; 178 vdd-l2-l13-l14-supply = <&vreg_bob1>; 179 vdd-l5-l16-supply = <&vreg_bob1>; 180 vdd-l6-l7-supply = <&vreg_bob2>; 181 vdd-l8-l9-supply = <&vreg_bob1>; 182 vdd-l12-supply = <&vreg_s5j>; 183 vdd-l15-supply = <&vreg_s4c>; 184 vdd-l17-supply = <&vreg_bob2>; 185 186 vreg_bob1: bob1 { 187 regulator-name = "vreg_bob1"; 188 regulator-min-microvolt = <3008000>; 189 regulator-max-microvolt = <3960000>; 190 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 191 }; 192 193 vreg_bob2: bob2 { 194 regulator-name = "vreg_bob2"; 195 regulator-min-microvolt = <2504000>; 196 regulator-max-microvolt = <3008000>; 197 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 198 }; 199 200 vreg_l1b: ldo1 { 201 regulator-name = "vreg_l1b"; 202 regulator-min-microvolt = <1800000>; 203 regulator-max-microvolt = <1800000>; 204 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 205 }; 206 207 vreg_l2b: ldo2 { 208 regulator-name = "vreg_l2b"; 209 regulator-min-microvolt = <3072000>; 210 regulator-max-microvolt = <3072000>; 211 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 212 }; 213 214 vreg_l4b: ldo4 { 215 regulator-name = "vreg_l4b"; 216 regulator-min-microvolt = <1800000>; 217 regulator-max-microvolt = <1800000>; 218 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 219 }; 220 221 vreg_l5b: ldo5 { 222 regulator-name = "vreg_l5b"; 223 regulator-min-microvolt = <3000000>; 224 regulator-max-microvolt = <3000000>; 225 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 226 }; 227 228 vreg_l6b: ldo6 { 229 regulator-name = "vreg_l6b"; 230 regulator-min-microvolt = <1800000>; 231 regulator-max-microvolt = <2960000>; 232 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 233 }; 234 235 vreg_l7b: ldo7 { 236 regulator-name = "vreg_l7b"; 237 regulator-min-microvolt = <2800000>; 238 regulator-max-microvolt = <2800000>; 239 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 240 }; 241 242 vreg_l8b: ldo8 { 243 regulator-name = "vreg_l8b"; 244 regulator-min-microvolt = <3072000>; 245 regulator-max-microvolt = <3072000>; 246 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 247 }; 248 249 vreg_l9b: ldo9 { 250 regulator-name = "vreg_l9b"; 251 regulator-min-microvolt = <2960000>; 252 regulator-max-microvolt = <2960000>; 253 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 254 }; 255 256 vreg_l10b: ldo10 { 257 regulator-name = "vreg_l10b"; 258 regulator-min-microvolt = <1800000>; 259 regulator-max-microvolt = <1800000>; 260 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 261 }; 262 263 vreg_l12b: ldo12 { 264 regulator-name = "vreg_l12b"; 265 regulator-min-microvolt = <1200000>; 266 regulator-max-microvolt = <1200000>; 267 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 268 }; 269 270 vreg_l13b: ldo13 { 271 regulator-name = "vreg_l13b"; 272 regulator-min-microvolt = <3072000>; 273 regulator-max-microvolt = <3072000>; 274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 275 }; 276 277 vreg_l14b: ldo14 { 278 regulator-name = "vreg_l14b"; 279 regulator-min-microvolt = <3072000>; 280 regulator-max-microvolt = <3072000>; 281 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 282 }; 283 284 vreg_l15b: ldo15 { 285 regulator-name = "vreg_l15b"; 286 regulator-min-microvolt = <1800000>; 287 regulator-max-microvolt = <1800000>; 288 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 289 }; 290 291 vreg_l16b: ldo16 { 292 regulator-name = "vreg_l16b"; 293 regulator-min-microvolt = <2912000>; 294 regulator-max-microvolt = <2912000>; 295 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 296 }; 297 298 vreg_l17b: ldo17 { 299 regulator-name = "vreg_l17b"; 300 regulator-min-microvolt = <2504000>; 301 regulator-max-microvolt = <2504000>; 302 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 303 }; 304 }; 305 306 regulators-1 { 307 compatible = "qcom,pm8550ve-rpmh-regulators"; 308 qcom,pmic-id = "c"; 309 310 vdd-l1-supply = <&vreg_s5j>; 311 vdd-l2-supply = <&vreg_s1f>; 312 vdd-l3-supply = <&vreg_s1f>; 313 vdd-s4-supply = <&vph_pwr>; 314 315 vreg_s4c: smps4 { 316 regulator-name = "vreg_s4c"; 317 regulator-min-microvolt = <1856000>; 318 regulator-max-microvolt = <2000000>; 319 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 320 }; 321 322 vreg_l1c: ldo1 { 323 regulator-name = "vreg_l1c"; 324 regulator-min-microvolt = <1200000>; 325 regulator-max-microvolt = <1200000>; 326 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 327 }; 328 329 vreg_l2c: ldo2 { 330 regulator-name = "vreg_l2c"; 331 regulator-min-microvolt = <880000>; 332 regulator-max-microvolt = <920000>; 333 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 334 }; 335 336 vreg_l3c: ldo3 { 337 regulator-name = "vreg_l3c"; 338 regulator-min-microvolt = <912000>; 339 regulator-max-microvolt = <920000>; 340 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 341 }; 342 }; 343 344 regulators-2 { 345 compatible = "qcom,pmc8380-rpmh-regulators"; 346 qcom,pmic-id = "d"; 347 348 vdd-l1-supply = <&vreg_s1f>; 349 vdd-l2-supply = <&vreg_s1f>; 350 vdd-l3-supply = <&vreg_s4c>; 351 vdd-s1-supply = <&vph_pwr>; 352 353 vreg_l1d: ldo1 { 354 regulator-name = "vreg_l1d"; 355 regulator-min-microvolt = <880000>; 356 regulator-max-microvolt = <920000>; 357 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 358 }; 359 360 vreg_l2d: ldo2 { 361 regulator-name = "vreg_l2d"; 362 regulator-min-microvolt = <912000>; 363 regulator-max-microvolt = <920000>; 364 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 365 }; 366 367 vreg_l3d: ldo3 { 368 regulator-name = "vreg_l3d"; 369 regulator-min-microvolt = <1800000>; 370 regulator-max-microvolt = <1800000>; 371 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 372 }; 373 }; 374 375 regulators-3 { 376 compatible = "qcom,pmc8380-rpmh-regulators"; 377 qcom,pmic-id = "e"; 378 379 vdd-l2-supply = <&vreg_s1f>; 380 vdd-l3-supply = <&vreg_s5j>; 381 382 vreg_l2e: ldo2 { 383 regulator-name = "vreg_l2e"; 384 regulator-min-microvolt = <880000>; 385 regulator-max-microvolt = <920000>; 386 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 387 }; 388 389 vreg_l3e: ldo3 { 390 regulator-name = "vreg_l3e"; 391 regulator-min-microvolt = <1200000>; 392 regulator-max-microvolt = <1200000>; 393 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 394 }; 395 }; 396 397 regulators-4 { 398 compatible = "qcom,pmc8380-rpmh-regulators"; 399 qcom,pmic-id = "f"; 400 401 vdd-l1-supply = <&vreg_s5j>; 402 vdd-l2-supply = <&vreg_s5j>; 403 vdd-l3-supply = <&vreg_s5j>; 404 vdd-s1-supply = <&vph_pwr>; 405 406 vreg_s1f: smps1 { 407 regulator-name = "vreg_s1f"; 408 regulator-min-microvolt = <700000>; 409 regulator-max-microvolt = <1100000>; 410 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 411 }; 412 413 vreg_l1f: ldo1 { 414 regulator-name = "vreg_l1f"; 415 regulator-min-microvolt = <1024000>; 416 regulator-max-microvolt = <1024000>; 417 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 418 }; 419 420 vreg_l2f: ldo2 { 421 regulator-name = "vreg_l2f"; 422 regulator-min-microvolt = <1024000>; 423 regulator-max-microvolt = <1024000>; 424 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 425 }; 426 427 vreg_l3f: ldo3 { 428 regulator-name = "vreg_l3f"; 429 regulator-min-microvolt = <1024000>; 430 regulator-max-microvolt = <1024000>; 431 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 432 }; 433 }; 434 435 regulators-6 { 436 compatible = "qcom,pm8550ve-rpmh-regulators"; 437 qcom,pmic-id = "i"; 438 439 vdd-l1-supply = <&vreg_s4c>; 440 vdd-l2-supply = <&vreg_s5j>; 441 vdd-l3-supply = <&vreg_s1f>; 442 vdd-s1-supply = <&vph_pwr>; 443 vdd-s2-supply = <&vph_pwr>; 444 445 vreg_s1i: smps1 { 446 regulator-name = "vreg_s1i"; 447 regulator-min-microvolt = <900000>; 448 regulator-max-microvolt = <920000>; 449 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 450 }; 451 452 vreg_s2i: smps2 { 453 regulator-name = "vreg_s2i"; 454 regulator-min-microvolt = <1000000>; 455 regulator-max-microvolt = <1100000>; 456 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 457 }; 458 459 vreg_l1i: ldo1 { 460 regulator-name = "vreg_l1i"; 461 regulator-min-microvolt = <1800000>; 462 regulator-max-microvolt = <1800000>; 463 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 464 }; 465 466 vreg_l2i: ldo2 { 467 regulator-name = "vreg_l2i"; 468 regulator-min-microvolt = <1200000>; 469 regulator-max-microvolt = <1200000>; 470 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 471 }; 472 473 vreg_l3i: ldo3 { 474 regulator-name = "vreg_l3i"; 475 regulator-min-microvolt = <880000>; 476 regulator-max-microvolt = <920000>; 477 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 478 }; 479 }; 480 481 regulators-7 { 482 compatible = "qcom,pm8550ve-rpmh-regulators"; 483 qcom,pmic-id = "j"; 484 485 vdd-l1-supply = <&vreg_s1f>; 486 vdd-l2-supply = <&vreg_s5j>; 487 vdd-l3-supply = <&vreg_s1f>; 488 vdd-s5-supply = <&vph_pwr>; 489 490 vreg_s5j: smps5 { 491 regulator-name = "vreg_s5j"; 492 regulator-min-microvolt = <1256000>; 493 regulator-max-microvolt = <1304000>; 494 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 495 }; 496 497 vreg_l1j: ldo1 { 498 regulator-name = "vreg_l1j"; 499 regulator-min-microvolt = <912000>; 500 regulator-max-microvolt = <920000>; 501 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 502 }; 503 504 vreg_l2j: ldo2 { 505 regulator-name = "vreg_l2j"; 506 regulator-min-microvolt = <1256000>; 507 regulator-max-microvolt = <1256000>; 508 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 509 }; 510 511 vreg_l3j: ldo3 { 512 regulator-name = "vreg_l3j"; 513 regulator-min-microvolt = <880000>; 514 regulator-max-microvolt = <920000>; 515 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 516 }; 517 }; 518}; 519 520&gpu { 521 status = "okay"; 522 523 zap-shader { 524 memory-region = <&gpu_microcode_mem>; 525 firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn"; 526 }; 527}; 528 529&i2c0 { 530 clock-frequency = <100000>; 531 532 status = "okay"; 533 534 /* Something @39, @3e, @44 */ 535}; 536 537&i2c3 { 538 clock-frequency = <400000>; 539 540 status = "okay"; 541 542 /* PS8830 USB retimer @8 */ 543}; 544 545&i2c4 { 546 clock-frequency = <400000>; 547 548 status = "okay"; 549 550 /* Something @18, @2c, @2e */ 551}; 552 553&i2c5 { 554 clock-frequency = <400000>; 555 556 status = "okay"; 557 558 /* Something @4f */ 559}; 560 561&i2c7 { 562 clock-frequency = <400000>; 563 564 status = "okay"; 565 566 /* PS8830 USB retimer @8 */ 567}; 568 569 570&mdss { 571 status = "okay"; 572}; 573 574&mdss_dp3 { 575 compatible = "qcom,x1e80100-dp"; 576 /delete-property/ #sound-dai-cells; 577 578 status = "okay"; 579 580 aux-bus { 581 panel { 582 compatible = "edp-panel"; 583 584 backlight = <&backlight>; 585 power-supply = <&vreg_edp_3p3>; 586 587 port { 588 edp_panel_in: endpoint { 589 remote-endpoint = <&mdss_dp3_out>; 590 }; 591 }; 592 }; 593 }; 594 595 ports { 596 port@1 { 597 reg = <1>; 598 599 mdss_dp3_out: endpoint { 600 data-lanes = <0 1 2 3>; 601 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; 602 603 remote-endpoint = <&edp_panel_in>; 604 }; 605 }; 606 }; 607}; 608 609&mdss_dp3_phy { 610 vdda-phy-supply = <&vreg_l3j>; 611 vdda-pll-supply = <&vreg_l2j>; 612 613 status = "okay"; 614}; 615 616&pcie4 { 617 status = "okay"; 618}; 619 620&pcie4_phy { 621 vdda-phy-supply = <&vreg_l3i>; 622 vdda-pll-supply = <&vreg_l3e>; 623 624 status = "okay"; 625}; 626 627&pcie6a { 628 perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; 629 wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; 630 631 vddpe-3v3-supply = <&vreg_nvme>; 632 633 pinctrl-0 = <&pcie6a_default>; 634 pinctrl-names = "default"; 635 636 status = "okay"; 637}; 638 639&pcie6a_phy { 640 vdda-phy-supply = <&vreg_l1d>; 641 vdda-pll-supply = <&vreg_l2j>; 642 643 status = "okay"; 644}; 645 646&pmc8380_3_gpios { 647 edp_bl_en: edp-bl-en-state { 648 pins = "gpio4"; 649 function = "normal"; 650 power-source = <1>; /* 1.8V */ 651 input-disable; 652 output-enable; 653 }; 654}; 655 656&pmk8550_pwm { 657 status = "okay"; 658}; 659 660&pmk8550_gpios { 661 edp_bl_pwm: edp-bl-pwm-state { 662 pins = "gpio5"; 663 function = "func3"; 664 }; 665}; 666 667&qupv3_0 { 668 status = "okay"; 669}; 670 671&qupv3_1 { 672 status = "okay"; 673}; 674 675&qupv3_2 { 676 status = "okay"; 677}; 678 679&remoteproc_adsp { 680 firmware-name = "qcom/x1e80100/microsoft/Romulus/qcadsp8380.mbn", 681 "qcom/x1e80100/microsoft/Romulus/adsp_dtb.mbn"; 682 683 status = "okay"; 684}; 685 686&remoteproc_cdsp { 687 firmware-name = "qcom/x1e80100/microsoft/Romulus/qccdsp8380.mbn", 688 "qcom/x1e80100/microsoft/Romulus/cdsp_dtb.mbn"; 689 690 status = "okay"; 691}; 692 693&smb2360_0_eusb2_repeater { 694 vdd18-supply = <&vreg_l3d>; 695 vdd3-supply = <&vreg_l2b>; 696}; 697 698&smb2360_1_eusb2_repeater { 699 vdd18-supply = <&vreg_l3d>; 700 vdd3-supply = <&vreg_l14b>; 701}; 702 703&tlmm { 704 gpio-reserved-ranges = <44 4>, /* SPI (TPM) */ 705 <238 1>; /* UFS Reset */ 706 707 nvme_reg_en: nvme-reg-en-state { 708 pins = "gpio18"; 709 function = "gpio"; 710 drive-strength = <2>; 711 bias-disable; 712 }; 713 714 edp_reg_en: edp-reg-en-state { 715 pins = "gpio70"; 716 function = "gpio"; 717 drive-strength = <16>; 718 bias-disable; 719 }; 720 721 ssam_state: ssam-state-state { 722 pins = "gpio91"; 723 function = "gpio"; 724 bias-disable; 725 }; 726 727 pcie6a_default: pcie6a-default-state { 728 perst-n-pins { 729 pins = "gpio152"; 730 function = "gpio"; 731 drive-strength = <2>; 732 bias-disable; 733 }; 734 735 clkreq-n-pins { 736 pins = "gpio153"; 737 function = "pcie6a_clk"; 738 drive-strength = <2>; 739 bias-pull-up; 740 }; 741 742 wake-n-pins { 743 pins = "gpio154"; 744 function = "gpio"; 745 drive-strength = <2>; 746 bias-pull-up; 747 }; 748 }; 749 750 cam_indicator_en: cam-indicator-en-state { 751 pins = "gpio225"; 752 function = "gpio"; 753 drive-strength = <2>; 754 bias-disable; 755 }; 756}; 757 758&uart2 { 759 status = "okay"; 760 761 embedded-controller { 762 compatible = "microsoft,surface-sam"; 763 764 interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>; 765 766 current-speed = <4000000>; 767 768 pinctrl-0 = <&ssam_state>; 769 pinctrl-names = "default"; 770 }; 771}; 772 773&usb_1_ss0_hsphy { 774 vdd-supply = <&vreg_l3j>; 775 vdda12-supply = <&vreg_l2j>; 776 777 phys = <&smb2360_0_eusb2_repeater>; 778 779 status = "okay"; 780}; 781 782&usb_1_ss0_qmpphy { 783 vdda-phy-supply = <&vreg_l3e>; 784 vdda-pll-supply = <&vreg_l1j>; 785 786 status = "okay"; 787}; 788 789&usb_1_ss0 { 790 status = "okay"; 791}; 792 793&usb_1_ss0_dwc3 { 794 dr_mode = "host"; 795}; 796 797&usb_1_ss0_dwc3_hs { 798 remote-endpoint = <&pmic_glink_ss0_hs_in>; 799}; 800 801&usb_1_ss0_qmpphy_out { 802 remote-endpoint = <&pmic_glink_ss0_ss_in>; 803}; 804 805&usb_1_ss1_hsphy { 806 vdd-supply = <&vreg_l3j>; 807 vdda12-supply = <&vreg_l2j>; 808 809 phys = <&smb2360_1_eusb2_repeater>; 810 811 status = "okay"; 812}; 813 814&usb_1_ss1_qmpphy { 815 vdda-phy-supply = <&vreg_l3e>; 816 vdda-pll-supply = <&vreg_l2d>; 817 818 status = "okay"; 819}; 820 821&usb_1_ss1 { 822 status = "okay"; 823}; 824 825&usb_1_ss1_dwc3 { 826 dr_mode = "host"; 827}; 828 829&usb_1_ss1_dwc3_hs { 830 remote-endpoint = <&pmic_glink_ss1_hs_in>; 831}; 832 833&usb_1_ss1_qmpphy_out { 834 remote-endpoint = <&pmic_glink_ss1_ss_in>; 835}; 836