1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2023, Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/leds/common.h> 9#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 10#include "sm8650.dtsi" 11#include "pm8010.dtsi" 12#include "pm8550.dtsi" 13#include "pm8550b.dtsi" 14#define PMK8550VE_SID 8 15#include "pm8550ve.dtsi" 16#include "pm8550vs.dtsi" 17#include "pmk8550.dtsi" 18#include "pmr735d_a.dtsi" 19 20/ { 21 model = "Qualcomm Technologies, Inc. SM8650 QRD"; 22 compatible = "qcom,sm8650-qrd", "qcom,sm8650"; 23 24 aliases { 25 serial0 = &uart15; 26 serial1 = &uart14; 27 }; 28 29 chosen { 30 stdout-path = "serial0:115200n8"; 31 }; 32 33 gpio-keys { 34 compatible = "gpio-keys"; 35 36 pinctrl-0 = <&volume_up_n>; 37 pinctrl-names = "default"; 38 39 key-volume-up { 40 label = "Volume Up"; 41 linux,code = <KEY_VOLUMEUP>; 42 gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; 43 debounce-interval = <15>; 44 linux,can-disable; 45 wakeup-source; 46 }; 47 }; 48 49 pmic-glink { 50 compatible = "qcom,sm8650-pmic-glink", 51 "qcom,sm8550-pmic-glink", 52 "qcom,pmic-glink"; 53 #address-cells = <1>; 54 #size-cells = <0>; 55 orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; 56 57 connector@0 { 58 compatible = "usb-c-connector"; 59 reg = <0>; 60 61 power-role = "dual"; 62 data-role = "dual"; 63 64 ports { 65 #address-cells = <1>; 66 #size-cells = <0>; 67 68 port@0 { 69 reg = <0>; 70 71 pmic_glink_hs_in: endpoint { 72 remote-endpoint = <&usb_1_dwc3_hs>; 73 }; 74 }; 75 76 port@1 { 77 reg = <1>; 78 79 pmic_glink_ss_in: endpoint { 80 remote-endpoint = <&redriver_ss_out>; 81 }; 82 }; 83 84 port@2 { 85 reg = <2>; 86 87 pmic_glink_sbu: endpoint { 88 remote-endpoint = <&wcd_usbss_sbu_mux>; 89 }; 90 }; 91 }; 92 }; 93 }; 94 95 sound { 96 compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; 97 model = "SM8650-QRD"; 98 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", 99 "SpkrRight IN", "WSA_SPK2 OUT", 100 "IN1_HPHL", "HPHL_OUT", 101 "IN2_HPHR", "HPHR_OUT", 102 "AMIC1", "MIC BIAS1", 103 "AMIC2", "MIC BIAS2", 104 "AMIC3", "MIC BIAS3", 105 "AMIC4", "MIC BIAS3", 106 "AMIC5", "MIC BIAS4", 107 "TX SWR_INPUT0", "ADC1_OUTPUT", 108 "TX SWR_INPUT1", "ADC2_OUTPUT", 109 "TX SWR_INPUT2", "ADC3_OUTPUT", 110 "TX SWR_INPUT3", "ADC4_OUTPUT"; 111 112 wcd-playback-dai-link { 113 link-name = "WCD Playback"; 114 115 cpu { 116 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 117 }; 118 119 codec { 120 sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; 121 }; 122 123 platform { 124 sound-dai = <&q6apm>; 125 }; 126 }; 127 128 wcd-capture-dai-link { 129 link-name = "WCD Capture"; 130 131 cpu { 132 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 133 }; 134 135 codec { 136 sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; 137 }; 138 139 platform { 140 sound-dai = <&q6apm>; 141 }; 142 }; 143 144 wsa-dai-link { 145 link-name = "WSA Playback"; 146 147 cpu { 148 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 149 }; 150 151 codec { 152 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; 153 }; 154 155 platform { 156 sound-dai = <&q6apm>; 157 }; 158 }; 159 }; 160 161 vph_pwr: vph-pwr-regulator { 162 compatible = "regulator-fixed"; 163 164 regulator-name = "vph_pwr"; 165 regulator-min-microvolt = <3700000>; 166 regulator-max-microvolt = <3700000>; 167 168 regulator-always-on; 169 regulator-boot-on; 170 }; 171 172 wcd939x: audio-codec { 173 compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; 174 175 pinctrl-0 = <&wcd_default>; 176 pinctrl-names = "default"; 177 178 qcom,micbias1-microvolt = <1800000>; 179 qcom,micbias2-microvolt = <1800000>; 180 qcom,micbias3-microvolt = <1800000>; 181 qcom,micbias4-microvolt = <1800000>; 182 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 183 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 184 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 185 qcom,rx-device = <&wcd_rx>; 186 qcom,tx-device = <&wcd_tx>; 187 188 reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; 189 190 vdd-buck-supply = <&vreg_l15b_1p8>; 191 vdd-rxtx-supply = <&vreg_l15b_1p8>; 192 vdd-io-supply = <&vreg_l15b_1p8>; 193 vdd-mic-bias-supply = <&vreg_bob1>; 194 195 #sound-dai-cells = <1>; 196 197 mode-switch; 198 orientation-switch; 199 200 port { 201 wcd_codec_headset_in: endpoint { 202 remote-endpoint = <&wcd_usbss_headset_out>; 203 }; 204 }; 205 }; 206 207 wcn7850-pmu { 208 compatible = "qcom,wcn7850-pmu"; 209 210 pinctrl-names = "default"; 211 pinctrl-0 = <&wlan_en>, <&bt_default>; 212 213 wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; 214 bt-enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; 215 216 vdd-supply = <&vreg_s4i_0p85>; 217 vddio-supply = <&vreg_l15b_1p8>; 218 vddio1p2-supply = <&vreg_l3c_1p2>; 219 vddaon-supply = <&vreg_s2c_0p8>; 220 vdddig-supply = <&vreg_s3c_0p9>; 221 vddrfa1p2-supply = <&vreg_s1c_1p2>; 222 vddrfa1p8-supply = <&vreg_s6c_1p8>; 223 224 clocks = <&rpmhcc RPMH_RF_CLK1>; 225 226 regulators { 227 vreg_pmu_rfa_cmn: ldo0 { 228 regulator-name = "vreg_pmu_rfa_cmn"; 229 }; 230 231 vreg_pmu_aon_0p59: ldo1 { 232 regulator-name = "vreg_pmu_aon_0p59"; 233 }; 234 235 vreg_pmu_wlcx_0p8: ldo2 { 236 regulator-name = "vreg_pmu_wlcx_0p8"; 237 }; 238 239 vreg_pmu_wlmx_0p85: ldo3 { 240 regulator-name = "vreg_pmu_wlmx_0p85"; 241 }; 242 243 vreg_pmu_btcmx_0p85: ldo4 { 244 regulator-name = "vreg_pmu_btcmx_0p85"; 245 }; 246 247 vreg_pmu_rfa_0p8: ldo5 { 248 regulator-name = "vreg_pmu_rfa_0p8"; 249 }; 250 251 vreg_pmu_rfa_1p2: ldo6 { 252 regulator-name = "vreg_pmu_rfa_1p2"; 253 }; 254 255 vreg_pmu_rfa_1p8: ldo7 { 256 regulator-name = "vreg_pmu_rfa_1p8"; 257 }; 258 259 vreg_pmu_pcie_0p9: ldo8 { 260 regulator-name = "vreg_pmu_pcie_0p9"; 261 }; 262 263 vreg_pmu_pcie_1p8: ldo9 { 264 regulator-name = "vreg_pmu_pcie_1p8"; 265 }; 266 }; 267 }; 268}; 269 270&apps_rsc { 271 regulators-0 { 272 compatible = "qcom,pm8550-rpmh-regulators"; 273 274 vdd-bob1-supply = <&vph_pwr>; 275 vdd-bob2-supply = <&vph_pwr>; 276 vdd-l2-l13-l14-supply = <&vreg_bob1>; 277 vdd-l3-supply = <&vreg_s1c_1p2>; 278 vdd-l5-l16-supply = <&vreg_bob1>; 279 vdd-l6-l7-supply = <&vreg_bob1>; 280 vdd-l8-l9-supply = <&vreg_bob1>; 281 vdd-l11-supply = <&vreg_s1c_1p2>; 282 vdd-l12-supply = <&vreg_s6c_1p8>; 283 vdd-l15-supply = <&vreg_s6c_1p8>; 284 vdd-l17-supply = <&vreg_bob2>; 285 286 qcom,pmic-id = "b"; 287 288 vreg_bob1: bob1 { 289 regulator-name = "vreg_bob1"; 290 regulator-min-microvolt = <3296000>; 291 regulator-max-microvolt = <3960000>; 292 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 293 }; 294 295 vreg_bob2: bob2 { 296 regulator-name = "vreg_bob2"; 297 regulator-min-microvolt = <2720000>; 298 regulator-max-microvolt = <3008000>; 299 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 300 }; 301 302 vreg_l2b_3p0: ldo2 { 303 regulator-name = "vreg_l2b_3p0"; 304 regulator-min-microvolt = <3008000>; 305 regulator-max-microvolt = <3008000>; 306 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 307 regulator-allow-set-load; 308 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 309 RPMH_REGULATOR_MODE_HPM>; 310 }; 311 312 vreg_l5b_3p1: ldo5 { 313 regulator-name = "vreg_l5b_3p1"; 314 regulator-min-microvolt = <3104000>; 315 regulator-max-microvolt = <3104000>; 316 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 317 regulator-allow-set-load; 318 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 319 RPMH_REGULATOR_MODE_HPM>; 320 }; 321 322 vreg_l6b_1p8: ldo6 { 323 regulator-name = "vreg_l6b_1p8"; 324 regulator-min-microvolt = <1800000>; 325 regulator-max-microvolt = <3008000>; 326 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 327 regulator-allow-set-load; 328 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 329 RPMH_REGULATOR_MODE_HPM>; 330 }; 331 332 vreg_l7b_1p8: ldo7 { 333 regulator-name = "vreg_l7b_1p8"; 334 regulator-min-microvolt = <1800000>; 335 regulator-max-microvolt = <3008000>; 336 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 337 }; 338 339 vreg_l8b_1p8: ldo8 { 340 regulator-name = "vreg_l8b_1p8"; 341 regulator-min-microvolt = <1800000>; 342 regulator-max-microvolt = <3008000>; 343 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 344 regulator-allow-set-load; 345 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 346 RPMH_REGULATOR_MODE_HPM>; 347 }; 348 349 vreg_l11b_1p2: ldo11 { 350 regulator-name = "vreg_l11b_1p2"; 351 regulator-min-microvolt = <1200000>; 352 regulator-max-microvolt = <1504000>; 353 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 354 regulator-allow-set-load; 355 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 356 RPMH_REGULATOR_MODE_HPM>; 357 }; 358 359 vreg_l12b_1p8: ldo12 { 360 regulator-name = "vreg_l12b_1p8"; 361 regulator-min-microvolt = <1800000>; 362 regulator-max-microvolt = <1800000>; 363 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 364 regulator-allow-set-load; 365 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 366 RPMH_REGULATOR_MODE_HPM>; 367 }; 368 369 vreg_l13b_3p0: ldo13 { 370 regulator-name = "vreg_l13b_3p0"; 371 regulator-min-microvolt = <3000000>; 372 regulator-max-microvolt = <3000000>; 373 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 374 regulator-allow-set-load; 375 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 376 RPMH_REGULATOR_MODE_HPM>; 377 }; 378 379 vreg_l14b_3p2: ldo14 { 380 regulator-name = "vreg_l14b_3p2"; 381 regulator-min-microvolt = <3200000>; 382 regulator-max-microvolt = <3200000>; 383 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 384 regulator-allow-set-load; 385 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 386 RPMH_REGULATOR_MODE_HPM>; 387 }; 388 389 vreg_l15b_1p8: ldo15 { 390 regulator-name = "vreg_l15b_1p8"; 391 regulator-min-microvolt = <1800000>; 392 regulator-max-microvolt = <1800000>; 393 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 394 regulator-allow-set-load; 395 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 396 RPMH_REGULATOR_MODE_HPM>; 397 }; 398 399 vreg_l16b_2p8: ldo16 { 400 regulator-name = "vreg_l16b_2p8"; 401 regulator-min-microvolt = <2800000>; 402 regulator-max-microvolt = <2800000>; 403 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 404 regulator-allow-set-load; 405 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 406 RPMH_REGULATOR_MODE_HPM>; 407 }; 408 409 vreg_l17b_2p5: ldo17 { 410 regulator-name = "vreg_l17b_2p5"; 411 regulator-min-microvolt = <2504000>; 412 regulator-max-microvolt = <2504000>; 413 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 414 regulator-allow-set-load; 415 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 416 RPMH_REGULATOR_MODE_HPM>; 417 }; 418 }; 419 420 regulators-1 { 421 compatible = "qcom,pm8550vs-rpmh-regulators"; 422 423 vdd-l1-supply = <&vreg_s1c_1p2>; 424 vdd-l2-supply = <&vreg_s1c_1p2>; 425 vdd-l3-supply = <&vreg_s1c_1p2>; 426 vdd-s1-supply = <&vph_pwr>; 427 vdd-s2-supply = <&vph_pwr>; 428 vdd-s3-supply = <&vph_pwr>; 429 vdd-s4-supply = <&vph_pwr>; 430 vdd-s5-supply = <&vph_pwr>; 431 vdd-s6-supply = <&vph_pwr>; 432 433 qcom,pmic-id = "c"; 434 435 vreg_s1c_1p2: smps1 { 436 regulator-name = "vreg_s1c_1p2"; 437 regulator-min-microvolt = <1256000>; 438 regulator-max-microvolt = <1348000>; 439 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 440 }; 441 442 vreg_s2c_0p8: smps2 { 443 regulator-name = "vreg_s2c_0p8"; 444 regulator-min-microvolt = <852000>; 445 regulator-max-microvolt = <1036000>; 446 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 447 }; 448 449 vreg_s3c_0p9: smps3 { 450 regulator-name = "vreg_s3c_0p9"; 451 regulator-min-microvolt = <976000>; 452 regulator-max-microvolt = <1064000>; 453 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 454 }; 455 456 vreg_s4c_1p2: smps4 { 457 regulator-name = "vreg_s4c_1p2"; 458 regulator-min-microvolt = <1224000>; 459 regulator-max-microvolt = <1280000>; 460 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 461 }; 462 463 vreg_s5c_0p7: smps5 { 464 regulator-name = "vreg_s5c_0p7"; 465 regulator-min-microvolt = <752000>; 466 regulator-max-microvolt = <900000>; 467 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 468 }; 469 470 vreg_s6c_1p8: smps6 { 471 regulator-name = "vreg_s6c_1p8"; 472 regulator-min-microvolt = <1856000>; 473 regulator-max-microvolt = <2000000>; 474 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 475 }; 476 477 vreg_l1c_1p2: ldo1 { 478 regulator-name = "vreg_l1c_1p2"; 479 regulator-min-microvolt = <1200000>; 480 regulator-max-microvolt = <1200000>; 481 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 482 regulator-allow-set-load; 483 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 484 RPMH_REGULATOR_MODE_HPM>; 485 }; 486 487 vreg_l3c_1p2: ldo3 { 488 regulator-name = "vreg_l3c_1p2"; 489 regulator-min-microvolt = <1200000>; 490 regulator-max-microvolt = <1200000>; 491 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 492 regulator-allow-set-load; 493 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 494 RPMH_REGULATOR_MODE_HPM>; 495 }; 496 }; 497 498 regulators-2 { 499 compatible = "qcom,pm8550vs-rpmh-regulators"; 500 501 vdd-l1-supply = <&vreg_s3c_0p9>; 502 503 qcom,pmic-id = "d"; 504 505 vreg_l1d_0p88: ldo1 { 506 regulator-name = "vreg_l1d_0p88"; 507 regulator-min-microvolt = <912000>; 508 regulator-max-microvolt = <920000>; 509 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 510 regulator-allow-set-load; 511 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 512 RPMH_REGULATOR_MODE_HPM>; 513 }; 514 }; 515 516 regulators-3 { 517 compatible = "qcom,pm8550vs-rpmh-regulators"; 518 519 vdd-l3-supply = <&vreg_s3c_0p9>; 520 521 qcom,pmic-id = "e"; 522 523 vreg_l3e_0p9: ldo3 { 524 regulator-name = "vreg_l3e_0p9"; 525 regulator-min-microvolt = <880000>; 526 regulator-max-microvolt = <920000>; 527 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 528 regulator-allow-set-load; 529 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 530 RPMH_REGULATOR_MODE_HPM>; 531 }; 532 }; 533 534 regulators-4 { 535 compatible = "qcom,pm8550vs-rpmh-regulators"; 536 537 vdd-l1-supply = <&vreg_s3c_0p9>; 538 vdd-l3-supply = <&vreg_s3c_0p9>; 539 540 qcom,pmic-id = "g"; 541 542 vreg_l1g_0p91: ldo1 { 543 regulator-name = "vreg_l1g_0p91"; 544 regulator-min-microvolt = <912000>; 545 regulator-max-microvolt = <920000>; 546 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 547 regulator-allow-set-load; 548 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 549 RPMH_REGULATOR_MODE_HPM>; 550 }; 551 552 vreg_l3g_0p91: ldo3 { 553 regulator-name = "vreg_l3g_0p91"; 554 regulator-min-microvolt = <880000>; 555 regulator-max-microvolt = <912000>; 556 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 557 regulator-allow-set-load; 558 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 559 RPMH_REGULATOR_MODE_HPM>; 560 }; 561 }; 562 563 regulators-5 { 564 compatible = "qcom,pm8550ve-rpmh-regulators"; 565 566 vdd-l1-supply = <&vreg_s3c_0p9>; 567 vdd-l2-supply = <&vreg_s3c_0p9>; 568 vdd-l3-supply = <&vreg_s1c_1p2>; 569 vdd-s4-supply = <&vph_pwr>; 570 571 qcom,pmic-id = "i"; 572 573 vreg_s4i_0p85: smps4 { 574 regulator-name = "vreg_s4i_0p85"; 575 regulator-min-microvolt = <852000>; 576 regulator-max-microvolt = <1004000>; 577 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 578 }; 579 580 vreg_l1i_0p88: ldo1 { 581 regulator-name = "vreg_l1i_0p88"; 582 regulator-min-microvolt = <880000>; 583 regulator-max-microvolt = <912000>; 584 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 585 regulator-allow-set-load; 586 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 587 RPMH_REGULATOR_MODE_HPM>; 588 }; 589 590 vreg_l2i_0p88: ldo2 { 591 regulator-name = "vreg_l2i_0p88"; 592 regulator-min-microvolt = <880000>; 593 regulator-max-microvolt = <912000>; 594 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 595 regulator-allow-set-load; 596 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 597 RPMH_REGULATOR_MODE_HPM>; 598 }; 599 600 vreg_l3i_1p2: ldo3 { 601 regulator-name = "vreg_l3i_0p91"; 602 regulator-min-microvolt = <1200000>; 603 regulator-max-microvolt = <1200000>; 604 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 605 regulator-allow-set-load; 606 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 607 RPMH_REGULATOR_MODE_HPM>; 608 }; 609 }; 610 611 regulators-6 { 612 compatible = "qcom,pm8010-rpmh-regulators"; 613 qcom,pmic-id = "m"; 614 615 vdd-l1-l2-supply = <&vreg_s1c_1p2>; 616 vdd-l3-l4-supply = <&vreg_bob2>; 617 vdd-l5-supply = <&vreg_s6c_1p8>; 618 vdd-l6-supply = <&vreg_bob1>; 619 vdd-l7-supply = <&vreg_bob1>; 620 621 vreg_l1m_1p1: ldo1 { 622 regulator-name = "vreg_l1m_1p1"; 623 regulator-min-microvolt = <1104000>; 624 regulator-max-microvolt = <1104000>; 625 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 626 regulator-allow-set-load; 627 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 628 RPMH_REGULATOR_MODE_HPM>; 629 }; 630 631 vreg_l2m_1p056: ldo2 { 632 regulator-name = "vreg_l2m_1p056"; 633 regulator-min-microvolt = <1056000>; 634 regulator-max-microvolt = <1056000>; 635 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 636 regulator-allow-set-load; 637 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 638 RPMH_REGULATOR_MODE_HPM>; 639 }; 640 641 vreg_l3m_2p8: ldo3 { 642 regulator-name = "vreg_l3m_2p8"; 643 regulator-min-microvolt = <2800000>; 644 regulator-max-microvolt = <2800000>; 645 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 646 }; 647 648 vreg_l4m_2p8: ldo4 { 649 regulator-name = "vreg_l4m_2p8"; 650 regulator-min-microvolt = <2800000>; 651 regulator-max-microvolt = <2800000>; 652 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 653 }; 654 655 vreg_l5m_1p8: ldo5 { 656 regulator-name = "vreg_l5m_1p8"; 657 regulator-min-microvolt = <1800000>; 658 regulator-max-microvolt = <1800000>; 659 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 660 }; 661 662 vreg_l6m_2p8: ldo6 { 663 regulator-name = "vreg_l6m_2p8"; 664 regulator-min-microvolt = <2800000>; 665 regulator-max-microvolt = <2800000>; 666 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 667 }; 668 669 vreg_l7m_2p96: ldo7 { 670 regulator-name = "vreg_l7m_2p96"; 671 regulator-min-microvolt = <2960000>; 672 regulator-max-microvolt = <2960000>; 673 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 674 }; 675 }; 676 677 regulators-7 { 678 compatible = "qcom,pm8010-rpmh-regulators"; 679 qcom,pmic-id = "n"; 680 681 vdd-l1-l2-supply = <&vreg_s1c_1p2>; 682 vdd-l3-l4-supply = <&vreg_s6c_1p8>; 683 vdd-l5-supply = <&vreg_bob2>; 684 vdd-l6-supply = <&vreg_bob2>; 685 vdd-l7-supply = <&vreg_bob1>; 686 687 vreg_l1n_1p1: ldo1 { 688 regulator-name = "vreg_l1n_1p1"; 689 regulator-min-microvolt = <1104000>; 690 regulator-max-microvolt = <1104000>; 691 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 692 regulator-allow-set-load; 693 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 694 RPMH_REGULATOR_MODE_HPM>; 695 }; 696 697 vreg_l2n_1p056: ldo2 { 698 regulator-name = "vreg_l2n_1p056"; 699 regulator-min-microvolt = <1056000>; 700 regulator-max-microvolt = <1056000>; 701 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 702 regulator-allow-set-load; 703 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 704 RPMH_REGULATOR_MODE_HPM>; 705 }; 706 707 vreg_l3n_1p8: ldo3 { 708 regulator-name = "vreg_l3n_1p8"; 709 regulator-min-microvolt = <1800000>; 710 regulator-max-microvolt = <1800000>; 711 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 712 }; 713 714 vreg_l4n_1p8: ldo4 { 715 regulator-name = "vreg_l4n_1p8"; 716 regulator-min-microvolt = <1800000>; 717 regulator-max-microvolt = <1800000>; 718 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 719 }; 720 721 vreg_l5n_2p8: ldo5 { 722 regulator-name = "vreg_l5n_2p8"; 723 regulator-min-microvolt = <2800000>; 724 regulator-max-microvolt = <2800000>; 725 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 726 }; 727 728 vreg_l6n_2p8: ldo6 { 729 regulator-name = "vreg_l6n_2p8"; 730 regulator-min-microvolt = <2800000>; 731 regulator-max-microvolt = <2800000>; 732 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 733 }; 734 735 vreg_l7n_3p3: ldo7 { 736 regulator-name = "vreg_l7n_3p3"; 737 regulator-min-microvolt = <3304000>; 738 regulator-max-microvolt = <3304000>; 739 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 740 }; 741 }; 742}; 743 744&gpi_dma1 { 745 status = "okay"; 746}; 747 748&i2c3 { 749 status = "okay"; 750 751 wcd_usbss: typec-mux@e { 752 compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss"; 753 reg = <0xe>; 754 755 vdd-supply = <&vreg_l15b_1p8>; 756 reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>; 757 758 mode-switch; 759 orientation-switch; 760 761 ports { 762 #address-cells = <1>; 763 #size-cells = <0>; 764 765 port@0 { 766 reg = <0>; 767 768 wcd_usbss_sbu_mux: endpoint { 769 remote-endpoint = <&pmic_glink_sbu>; 770 }; 771 }; 772 773 port@1 { 774 reg = <1>; 775 776 wcd_usbss_headset_out: endpoint { 777 remote-endpoint = <&wcd_codec_headset_in>; 778 }; 779 }; 780 }; 781 }; 782}; 783 784&i2c6 { 785 status = "okay"; 786 787 typec-mux@1c { 788 compatible = "onnn,nb7vpq904m"; 789 reg = <0x1c>; 790 791 vcc-supply = <&vreg_l15b_1p8>; 792 793 retimer-switch; 794 orientation-switch; 795 796 ports { 797 #address-cells = <1>; 798 #size-cells = <0>; 799 800 port@0 { 801 reg = <0>; 802 803 redriver_ss_out: endpoint { 804 remote-endpoint = <&pmic_glink_ss_in>; 805 }; 806 }; 807 808 port@1 { 809 reg = <1>; 810 811 redriver_ss_in: endpoint { 812 data-lanes = <3 2 1 0>; 813 remote-endpoint = <&usb_dp_qmpphy_out>; 814 }; 815 }; 816 }; 817 }; 818}; 819 820&ipa { 821 qcom,gsi-loader = "self"; 822 memory-region = <&ipa_fw_mem>; 823 firmware-name = "qcom/sm8650/ipa_fws.mbn"; 824 status = "okay"; 825}; 826 827&gpu { 828 status = "okay"; 829 830 zap-shader { 831 firmware-name = "qcom/sm8650/gen70900_zap.mbn"; 832 }; 833}; 834 835&lpass_tlmm { 836 spkr_1_sd_n_active: spkr-1-sd-n-active-state { 837 pins = "gpio21"; 838 function = "gpio"; 839 drive-strength = <16>; 840 bias-disable; 841 output-low; 842 }; 843}; 844 845&mdss { 846 status = "okay"; 847}; 848 849&mdss_dsi0 { 850 vdda-supply = <&vreg_l3i_1p2>; 851 852 status = "okay"; 853 854 panel@0 { 855 compatible = "visionox,vtdr6130"; 856 reg = <0>; 857 858 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; 859 860 vddio-supply = <&vreg_l12b_1p8>; 861 vci-supply = <&vreg_l13b_3p0>; 862 vdd-supply = <&vreg_l11b_1p2>; 863 864 pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>; 865 pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>; 866 pinctrl-names = "default", "sleep"; 867 868 port { 869 panel0_in: endpoint { 870 remote-endpoint = <&mdss_dsi0_out>; 871 }; 872 }; 873 }; 874}; 875 876&mdss_dsi0_out { 877 remote-endpoint = <&panel0_in>; 878 data-lanes = <0 1 2 3>; 879}; 880 881&mdss_dsi0_phy { 882 vdds-supply = <&vreg_l1i_0p88>; 883 884 status = "okay"; 885}; 886 887&mdss_dp0 { 888 status = "okay"; 889}; 890 891&mdss_dp0_out { 892 data-lanes = <0 1>; 893}; 894 895&pcie0 { 896 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; 897 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; 898 899 pinctrl-0 = <&pcie0_default_state>; 900 pinctrl-names = "default"; 901 902 status = "okay"; 903}; 904 905&pcieport0 { 906 wifi@0 { 907 compatible = "pci17cb,1107"; 908 reg = <0x10000 0x0 0x0 0x0 0x0>; 909 910 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; 911 vddaon-supply = <&vreg_pmu_aon_0p59>; 912 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; 913 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; 914 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; 915 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; 916 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; 917 vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; 918 vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; 919 }; 920}; 921 922&pcie0_phy { 923 vdda-phy-supply = <&vreg_l1i_0p88>; 924 vdda-pll-supply = <&vreg_l3i_1p2>; 925 926 status = "okay"; 927}; 928 929&pon_pwrkey { 930 status = "okay"; 931}; 932 933&pon_resin { 934 linux,code = <KEY_VOLUMEDOWN>; 935 936 status = "okay"; 937}; 938 939&pm8550_flash { 940 status = "okay"; 941 942 led-0 { 943 function = LED_FUNCTION_FLASH; 944 color = <LED_COLOR_ID_YELLOW>; 945 led-sources = <1>, <4>; 946 led-max-microamp = <500000>; 947 flash-max-microamp = <2000000>; 948 flash-max-timeout-us = <1280000>; 949 function-enumerator = <0>; 950 }; 951 952 led-1 { 953 function = LED_FUNCTION_FLASH; 954 color = <LED_COLOR_ID_WHITE>; 955 led-sources = <2>, <3>; 956 led-max-microamp = <500000>; 957 flash-max-microamp = <2000000>; 958 flash-max-timeout-us = <1280000>; 959 function-enumerator = <1>; 960 }; 961}; 962 963&pm8550_gpios { 964 volume_up_n: volume-up-n-state { 965 pins = "gpio6"; 966 function = "normal"; 967 bias-pull-up; 968 input-enable; 969 power-source = <1>; 970 }; 971}; 972 973&pm8550_pwm { 974 status = "okay"; 975 976 multi-led { 977 color = <LED_COLOR_ID_RGB>; 978 function = LED_FUNCTION_STATUS; 979 980 #address-cells = <1>; 981 #size-cells = <0>; 982 983 led@1 { 984 reg = <1>; 985 color = <LED_COLOR_ID_RED>; 986 }; 987 988 led@2 { 989 reg = <2>; 990 color = <LED_COLOR_ID_GREEN>; 991 }; 992 993 led@3 { 994 reg = <3>; 995 color = <LED_COLOR_ID_BLUE>; 996 }; 997 }; 998}; 999 1000&pm8550b_eusb2_repeater { 1001 vdd18-supply = <&vreg_l15b_1p8>; 1002 vdd3-supply = <&vreg_l5b_3p1>; 1003}; 1004 1005&pmk8550_rtc { 1006 status = "okay"; 1007}; 1008 1009&qup_i2c3_data_clk { 1010 /* Use internal I2C pull-up */ 1011 bias-pull-up = <2200>; 1012}; 1013 1014&qupv3_id_0 { 1015 status = "okay"; 1016}; 1017 1018&qupv3_id_1 { 1019 status = "okay"; 1020}; 1021 1022&remoteproc_adsp { 1023 firmware-name = "qcom/sm8650/adsp.mbn", 1024 "qcom/sm8650/adsp_dtb.mbn"; 1025 1026 status = "okay"; 1027}; 1028 1029&remoteproc_cdsp { 1030 firmware-name = "qcom/sm8650/cdsp.mbn", 1031 "qcom/sm8650/cdsp_dtb.mbn"; 1032 1033 status = "okay"; 1034}; 1035 1036&remoteproc_mpss { 1037 firmware-name = "qcom/sm8650/modem.mbn", 1038 "qcom/sm8650/modem_dtb.mbn"; 1039 1040 status = "okay"; 1041}; 1042 1043&sleep_clk { 1044 clock-frequency = <32000>; 1045}; 1046 1047&spi4 { 1048 status = "okay"; 1049 1050 touchscreen@0 { 1051 compatible = "goodix,gt9916"; 1052 reg = <0>; 1053 1054 interrupt-parent = <&tlmm>; 1055 interrupts = <162 IRQ_TYPE_LEVEL_LOW>; 1056 1057 reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>; 1058 1059 avdd-supply = <&vreg_l14b_3p2>; 1060 1061 spi-max-frequency = <1000000>; 1062 1063 touchscreen-size-x = <1080>; 1064 touchscreen-size-y = <2400>; 1065 1066 pinctrl-0 = <&ts_irq>, <&ts_reset>; 1067 pinctrl-names = "default"; 1068 }; 1069}; 1070 1071&swr0 { 1072 status = "okay"; 1073 1074 /* WSA8845, Speaker Left */ 1075 left_spkr: speaker@0,0 { 1076 compatible = "sdw20217020400"; 1077 reg = <0 0>; 1078 pinctrl-0 = <&spkr_1_sd_n_active>; 1079 pinctrl-names = "default"; 1080 powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>; 1081 #sound-dai-cells = <0>; 1082 sound-name-prefix = "SpkrLeft"; 1083 vdd-1p8-supply = <&vreg_l15b_1p8>; 1084 vdd-io-supply = <&vreg_l3c_1p2>; 1085 1086 /* 1087 * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) 1088 * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) 1089 * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) 1090 * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) 1091 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) 1092 * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) 1093 */ 1094 qcom,port-mapping = <1 2 3 7 10 13>; 1095 }; 1096 1097 /* WSA8845, Speaker Right */ 1098 right_spkr: speaker@0,1 { 1099 compatible = "sdw20217020400"; 1100 reg = <0 1>; 1101 pinctrl-0 = <&spkr_2_sd_n_active>; 1102 pinctrl-names = "default"; 1103 powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; 1104 #sound-dai-cells = <0>; 1105 sound-name-prefix = "SpkrRight"; 1106 vdd-1p8-supply = <&vreg_l15b_1p8>; 1107 vdd-io-supply = <&vreg_l3c_1p2>; 1108 1109 /* 1110 * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) 1111 * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) 1112 * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) 1113 * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) 1114 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) 1115 * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) 1116 */ 1117 qcom,port-mapping = <4 5 6 7 11 13>; 1118 }; 1119}; 1120 1121&swr1 { 1122 status = "okay"; 1123 1124 /* WCD9395 RX */ 1125 wcd_rx: codec@0,4 { 1126 compatible = "sdw20217010e00"; 1127 reg = <0 4>; 1128 1129 /* 1130 * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) 1131 * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) 1132 * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) 1133 * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) 1134 * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) 1135 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) 1136 */ 1137 qcom,rx-port-mapping = <1 2 3 4 5 9>; 1138 }; 1139}; 1140 1141&swr2 { 1142 status = "okay"; 1143 1144 /* WCD9395 TX */ 1145 wcd_tx: codec@0,3 { 1146 compatible = "sdw20217010e00"; 1147 reg = <0 3>; 1148 1149 /* 1150 * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) 1151 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) 1152 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) 1153 * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) 1154 */ 1155 qcom,tx-port-mapping = <2 2 3 4>; 1156 }; 1157}; 1158 1159&tlmm { 1160 /* Reserved I/Os for NFC */ 1161 gpio-reserved-ranges = <32 8>, <74 1>; 1162 1163 bt_default: bt-default-state { 1164 bt-en-pins { 1165 pins = "gpio17"; 1166 function = "gpio"; 1167 drive-strength = <16>; 1168 bias-disable; 1169 }; 1170 1171 sw-ctrl-pins { 1172 pins = "gpio18"; 1173 function = "gpio"; 1174 bias-pull-down; 1175 }; 1176 }; 1177 1178 disp0_reset_n_active: disp0-reset-n-active-state { 1179 pins = "gpio133"; 1180 function = "gpio"; 1181 drive-strength = <8>; 1182 bias-disable; 1183 }; 1184 1185 disp0_reset_n_suspend: disp0-reset-n-suspend-state { 1186 pins = "gpio133"; 1187 function = "gpio"; 1188 drive-strength = <2>; 1189 bias-pull-down; 1190 }; 1191 1192 mdp_vsync_active: mdp-vsync-active-state { 1193 pins = "gpio86"; 1194 function = "mdp_vsync"; 1195 drive-strength = <2>; 1196 bias-pull-down; 1197 }; 1198 1199 mdp_vsync_suspend: mdp-vsync-suspend-state { 1200 pins = "gpio86"; 1201 function = "mdp_vsync"; 1202 drive-strength = <2>; 1203 bias-pull-down; 1204 }; 1205 1206 spkr_2_sd_n_active: spkr-2-sd-n-active-state { 1207 pins = "gpio77"; 1208 function = "gpio"; 1209 drive-strength = <16>; 1210 bias-disable; 1211 output-low; 1212 }; 1213 1214 ts_irq: ts-irq-state { 1215 pins = "gpio161"; 1216 function = "gpio"; 1217 drive-strength = <8>; 1218 bias-pull-up; 1219 output-disable; 1220 }; 1221 1222 ts_reset: ts-reset-state { 1223 pins = "gpio162"; 1224 function = "gpio"; 1225 drive-strength = <8>; 1226 bias-pull-up; 1227 }; 1228 1229 wcd_default: wcd-reset-n-active-state { 1230 pins = "gpio107"; 1231 function = "gpio"; 1232 drive-strength = <16>; 1233 bias-disable; 1234 output-low; 1235 }; 1236 1237 wlan_en: wlan-en-state { 1238 pins = "gpio16"; 1239 function = "gpio"; 1240 drive-strength = <8>; 1241 bias-pull-down; 1242 }; 1243}; 1244 1245&uart14 { 1246 status = "okay"; 1247 1248 bluetooth { 1249 compatible = "qcom,wcn7850-bt"; 1250 1251 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; 1252 vddaon-supply = <&vreg_pmu_aon_0p59>; 1253 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; 1254 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; 1255 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; 1256 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; 1257 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; 1258 1259 max-speed = <3200000>; 1260 }; 1261}; 1262 1263&uart15 { 1264 status = "okay"; 1265}; 1266 1267&ufs_mem_hc { 1268 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; 1269 1270 vcc-supply = <&vreg_l17b_2p5>; 1271 vcc-max-microamp = <1300000>; 1272 vccq-supply = <&vreg_l1c_1p2>; 1273 vccq-max-microamp = <1200000>; 1274 1275 status = "okay"; 1276}; 1277 1278&ufs_mem_phy { 1279 vdda-phy-supply = <&vreg_l1d_0p88>; 1280 vdda-pll-supply = <&vreg_l3i_1p2>; 1281 1282 status = "okay"; 1283}; 1284 1285/* 1286 * DPAUX -> WCD9395 -> USB_SBU -> USB-C 1287 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C 1288 * USB SS -> NB7VPQ904MMUTWG -> USB-C 1289 */ 1290 1291&usb_1 { 1292 status = "okay"; 1293}; 1294 1295&usb_1_dwc3 { 1296 dr_mode = "otg"; 1297 usb-role-switch; 1298}; 1299 1300&usb_1_dwc3_hs { 1301 remote-endpoint = <&pmic_glink_hs_in>; 1302}; 1303 1304&usb_1_hsphy { 1305 vdd-supply = <&vreg_l1i_0p88>; 1306 vdda12-supply = <&vreg_l3i_1p2>; 1307 1308 phys = <&pm8550b_eusb2_repeater>; 1309 1310 status = "okay"; 1311}; 1312 1313&usb_dp_qmpphy { 1314 vdda-phy-supply = <&vreg_l3i_1p2>; 1315 vdda-pll-supply = <&vreg_l3g_0p91>; 1316 1317 status = "okay"; 1318}; 1319 1320&usb_dp_qmpphy_out { 1321 remote-endpoint = <&redriver_ss_in>; 1322}; 1323 1324&xo_board { 1325 clock-frequency = <76800000>; 1326}; 1327