1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2023, Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 9#include "sm8650.dtsi" 10#include "pm8010.dtsi" 11#include "pm8550.dtsi" 12#include "pm8550b.dtsi" 13#define PMK8550VE_SID 8 14#include "pm8550ve.dtsi" 15#include "pm8550vs.dtsi" 16#include "pmk8550.dtsi" 17#include "pmr735d_a.dtsi" 18 19/ { 20 model = "Qualcomm Technologies, Inc. SM8650 MTP"; 21 compatible = "qcom,sm8650-mtp", "qcom,sm8650"; 22 23 aliases { 24 serial0 = &uart15; 25 }; 26 27 chosen { 28 stdout-path = "serial0:115200n8"; 29 }; 30 31 pmic-glink { 32 compatible = "qcom,sm8650-pmic-glink", 33 "qcom,sm8550-pmic-glink", 34 "qcom,pmic-glink"; 35 #address-cells = <1>; 36 #size-cells = <0>; 37 orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; 38 39 connector@0 { 40 compatible = "usb-c-connector"; 41 reg = <0>; 42 43 power-role = "dual"; 44 data-role = "dual"; 45 46 ports { 47 #address-cells = <1>; 48 #size-cells = <0>; 49 50 port@0 { 51 reg = <0>; 52 53 pmic_glink_hs_in: endpoint { 54 remote-endpoint = <&usb_1_dwc3_hs>; 55 }; 56 }; 57 58 port@1 { 59 reg = <1>; 60 61 pmic_glink_ss_in: endpoint { 62 remote-endpoint = <&usb_dp_qmpphy_out>; 63 }; 64 }; 65 }; 66 }; 67 }; 68 69 sound { 70 compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; 71 model = "SM8650-MTP"; 72 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", 73 "SpkrRight IN", "WSA_SPK2 OUT"; 74 75 wsa-dai-link { 76 link-name = "WSA Playback"; 77 78 cpu { 79 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 80 }; 81 82 codec { 83 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; 84 }; 85 86 platform { 87 sound-dai = <&q6apm>; 88 }; 89 }; 90 }; 91 92 vph_pwr: vph-pwr-regulator { 93 compatible = "regulator-fixed"; 94 95 regulator-name = "vph_pwr"; 96 regulator-min-microvolt = <3700000>; 97 regulator-max-microvolt = <3700000>; 98 99 regulator-always-on; 100 regulator-boot-on; 101 }; 102}; 103 104&apps_rsc { 105 regulators-0 { 106 compatible = "qcom,pm8550-rpmh-regulators"; 107 108 vdd-bob1-supply = <&vph_pwr>; 109 vdd-bob2-supply = <&vph_pwr>; 110 vdd-l2-l13-l14-supply = <&vreg_bob1>; 111 vdd-l3-supply = <&vreg_s1c_1p2>; 112 vdd-l5-l16-supply = <&vreg_bob1>; 113 vdd-l6-l7-supply = <&vreg_bob1>; 114 vdd-l8-l9-supply = <&vreg_bob1>; 115 vdd-l11-supply = <&vreg_s1c_1p2>; 116 vdd-l12-supply = <&vreg_s6c_1p8>; 117 vdd-l15-supply = <&vreg_s6c_1p8>; 118 vdd-l17-supply = <&vreg_bob2>; 119 120 qcom,pmic-id = "b"; 121 122 vreg_bob1: bob1 { 123 regulator-name = "vreg_bob1"; 124 regulator-min-microvolt = <3296000>; 125 regulator-max-microvolt = <3960000>; 126 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 127 }; 128 129 vreg_bob2: bob2 { 130 regulator-name = "vreg_bob2"; 131 regulator-min-microvolt = <2720000>; 132 regulator-max-microvolt = <3008000>; 133 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 134 }; 135 136 vreg_l2b_3p0: ldo2 { 137 regulator-name = "vreg_l2b_3p0"; 138 regulator-min-microvolt = <3008000>; 139 regulator-max-microvolt = <3008000>; 140 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 141 regulator-allow-set-load; 142 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 143 RPMH_REGULATOR_MODE_HPM>; 144 }; 145 146 vreg_l5b_3p1: ldo5 { 147 regulator-name = "vreg_l5b_3p1"; 148 regulator-min-microvolt = <3104000>; 149 regulator-max-microvolt = <3104000>; 150 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 151 regulator-allow-set-load; 152 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 153 RPMH_REGULATOR_MODE_HPM>; 154 }; 155 156 vreg_l6b_1p8: ldo6 { 157 regulator-name = "vreg_l6b_1p8"; 158 regulator-min-microvolt = <1800000>; 159 regulator-max-microvolt = <3008000>; 160 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 161 regulator-allow-set-load; 162 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 163 RPMH_REGULATOR_MODE_HPM>; 164 }; 165 166 vreg_l7b_1p8: ldo7 { 167 regulator-name = "vreg_l7b_1p8"; 168 regulator-min-microvolt = <1800000>; 169 regulator-max-microvolt = <3008000>; 170 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 171 }; 172 173 vreg_l8b_1p8: ldo8 { 174 regulator-name = "vreg_l8b_1p8"; 175 regulator-min-microvolt = <1800000>; 176 regulator-max-microvolt = <3008000>; 177 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 178 regulator-allow-set-load; 179 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 180 RPMH_REGULATOR_MODE_HPM>; 181 }; 182 183 vreg_l9b_2p9: ldo9 { 184 regulator-name = "vreg_l9b_2p9"; 185 regulator-min-microvolt = <2960000>; 186 regulator-max-microvolt = <3008000>; 187 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 188 regulator-allow-set-load; 189 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 190 RPMH_REGULATOR_MODE_HPM>; 191 }; 192 193 vreg_l11b_1p2: ldo11 { 194 regulator-name = "vreg_l11b_1p2"; 195 regulator-min-microvolt = <1200000>; 196 regulator-max-microvolt = <1504000>; 197 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 198 regulator-allow-set-load; 199 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 200 RPMH_REGULATOR_MODE_HPM>; 201 }; 202 203 vreg_l12b_1p8: ldo12 { 204 regulator-name = "vreg_l12b_1p8"; 205 regulator-min-microvolt = <1800000>; 206 regulator-max-microvolt = <1800000>; 207 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 208 regulator-allow-set-load; 209 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 210 RPMH_REGULATOR_MODE_HPM>; 211 }; 212 213 vreg_l13b_3p0: ldo13 { 214 regulator-name = "vreg_l13b_3p0"; 215 regulator-min-microvolt = <3000000>; 216 regulator-max-microvolt = <3000000>; 217 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 218 regulator-allow-set-load; 219 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 220 RPMH_REGULATOR_MODE_HPM>; 221 }; 222 223 vreg_l14b_3p2: ldo14 { 224 regulator-name = "vreg_l14b_3p2"; 225 regulator-min-microvolt = <3200000>; 226 regulator-max-microvolt = <3200000>; 227 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 228 regulator-allow-set-load; 229 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 230 RPMH_REGULATOR_MODE_HPM>; 231 }; 232 233 vreg_l15b_1p8: ldo15 { 234 regulator-name = "vreg_l15b_1p8"; 235 regulator-min-microvolt = <1800000>; 236 regulator-max-microvolt = <1800000>; 237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 238 regulator-allow-set-load; 239 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 240 RPMH_REGULATOR_MODE_HPM>; 241 }; 242 243 vreg_l16b_2p8: ldo16 { 244 regulator-name = "vreg_l16b_2p8"; 245 regulator-min-microvolt = <2800000>; 246 regulator-max-microvolt = <2800000>; 247 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 248 regulator-allow-set-load; 249 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 250 RPMH_REGULATOR_MODE_HPM>; 251 }; 252 253 vreg_l17b_2p5: ldo17 { 254 regulator-name = "vreg_l17b_2p5"; 255 regulator-min-microvolt = <2504000>; 256 regulator-max-microvolt = <2504000>; 257 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 258 regulator-allow-set-load; 259 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 260 RPMH_REGULATOR_MODE_HPM>; 261 }; 262 }; 263 264 regulators-1 { 265 compatible = "qcom,pm8550vs-rpmh-regulators"; 266 267 vdd-l1-supply = <&vreg_s1c_1p2>; 268 vdd-l2-supply = <&vreg_s1c_1p2>; 269 vdd-l3-supply = <&vreg_s1c_1p2>; 270 vdd-s1-supply = <&vph_pwr>; 271 vdd-s2-supply = <&vph_pwr>; 272 vdd-s3-supply = <&vph_pwr>; 273 vdd-s4-supply = <&vph_pwr>; 274 vdd-s5-supply = <&vph_pwr>; 275 vdd-s6-supply = <&vph_pwr>; 276 277 qcom,pmic-id = "c"; 278 279 vreg_s1c_1p2: smps1 { 280 regulator-name = "vreg_s1c_1p2"; 281 regulator-min-microvolt = <1256000>; 282 regulator-max-microvolt = <1348000>; 283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 284 }; 285 286 vreg_s2c_0p8: smps2 { 287 regulator-name = "vreg_s2c_0p8"; 288 regulator-min-microvolt = <852000>; 289 regulator-max-microvolt = <1036000>; 290 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 291 }; 292 293 vreg_s3c_0p9: smps3 { 294 regulator-name = "vreg_s3c_0p9"; 295 regulator-min-microvolt = <976000>; 296 regulator-max-microvolt = <1064000>; 297 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 298 }; 299 300 vreg_s4c_1p2: smps4 { 301 regulator-name = "vreg_s4c_1p2"; 302 regulator-min-microvolt = <1224000>; 303 regulator-max-microvolt = <1280000>; 304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 305 }; 306 307 vreg_s5c_0p7: smps5 { 308 regulator-name = "vreg_s5c_0p7"; 309 regulator-min-microvolt = <752000>; 310 regulator-max-microvolt = <900000>; 311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 312 }; 313 314 vreg_s6c_1p8: smps6 { 315 regulator-name = "vreg_s6c_1p8"; 316 regulator-min-microvolt = <1856000>; 317 regulator-max-microvolt = <2000000>; 318 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 319 }; 320 321 vreg_l1c_1p2: ldo1 { 322 regulator-name = "vreg_l1c_1p2"; 323 regulator-min-microvolt = <1200000>; 324 regulator-max-microvolt = <1200000>; 325 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 326 regulator-allow-set-load; 327 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 328 RPMH_REGULATOR_MODE_HPM>; 329 }; 330 331 vreg_l3c_1p2: ldo3 { 332 regulator-name = "vreg_l3c_1p2"; 333 regulator-min-microvolt = <1200000>; 334 regulator-max-microvolt = <1200000>; 335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 336 regulator-allow-set-load; 337 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 338 RPMH_REGULATOR_MODE_HPM>; 339 }; 340 }; 341 342 regulators-2 { 343 compatible = "qcom,pm8550vs-rpmh-regulators"; 344 345 vdd-l1-supply = <&vreg_s3c_0p9>; 346 347 qcom,pmic-id = "d"; 348 349 vreg_l1d_0p88: ldo1 { 350 regulator-name = "vreg_l1d_0p88"; 351 regulator-min-microvolt = <912000>; 352 regulator-max-microvolt = <920000>; 353 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 354 regulator-allow-set-load; 355 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 356 RPMH_REGULATOR_MODE_HPM>; 357 }; 358 }; 359 360 regulators-3 { 361 compatible = "qcom,pm8550vs-rpmh-regulators"; 362 363 vdd-l3-supply = <&vreg_s3c_0p9>; 364 365 qcom,pmic-id = "e"; 366 367 vreg_l3e_0p9: ldo3 { 368 regulator-name = "vreg_l3e_0p9"; 369 regulator-min-microvolt = <880000>; 370 regulator-max-microvolt = <920000>; 371 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 372 regulator-allow-set-load; 373 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 374 RPMH_REGULATOR_MODE_HPM>; 375 }; 376 }; 377 378 regulators-4 { 379 compatible = "qcom,pm8550vs-rpmh-regulators"; 380 381 vdd-l1-supply = <&vreg_s3c_0p9>; 382 vdd-l3-supply = <&vreg_s3c_0p9>; 383 384 qcom,pmic-id = "g"; 385 386 vreg_l1g_0p91: ldo1 { 387 regulator-name = "vreg_l1g_0p91"; 388 regulator-min-microvolt = <912000>; 389 regulator-max-microvolt = <920000>; 390 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 391 regulator-allow-set-load; 392 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 393 RPMH_REGULATOR_MODE_HPM>; 394 }; 395 396 vreg_l3g_0p91: ldo3 { 397 regulator-name = "vreg_l3g_0p91"; 398 regulator-min-microvolt = <880000>; 399 regulator-max-microvolt = <912000>; 400 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 401 regulator-allow-set-load; 402 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 403 RPMH_REGULATOR_MODE_HPM>; 404 }; 405 }; 406 407 regulators-5 { 408 compatible = "qcom,pm8550ve-rpmh-regulators"; 409 410 vdd-l1-supply = <&vreg_s3c_0p9>; 411 vdd-l2-supply = <&vreg_s3c_0p9>; 412 vdd-l3-supply = <&vreg_s1c_1p2>; 413 vdd-s4-supply = <&vph_pwr>; 414 415 qcom,pmic-id = "i"; 416 417 vreg_s4i_0p85: smps4 { 418 regulator-name = "vreg_s4i_0p85"; 419 regulator-min-microvolt = <852000>; 420 regulator-max-microvolt = <1004000>; 421 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 422 }; 423 424 vreg_l1i_0p88: ldo1 { 425 regulator-name = "vreg_l1i_0p88"; 426 regulator-min-microvolt = <880000>; 427 regulator-max-microvolt = <912000>; 428 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 429 regulator-allow-set-load; 430 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 431 RPMH_REGULATOR_MODE_HPM>; 432 }; 433 434 vreg_l2i_0p88: ldo2 { 435 regulator-name = "vreg_l2i_0p88"; 436 regulator-min-microvolt = <880000>; 437 regulator-max-microvolt = <912000>; 438 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 439 regulator-allow-set-load; 440 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 441 RPMH_REGULATOR_MODE_HPM>; 442 }; 443 444 vreg_l3i_1p2: ldo3 { 445 regulator-name = "vreg_l3i_0p91"; 446 regulator-min-microvolt = <1200000>; 447 regulator-max-microvolt = <1200000>; 448 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 449 regulator-allow-set-load; 450 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 451 RPMH_REGULATOR_MODE_HPM>; 452 }; 453 }; 454 455 regulators-6 { 456 compatible = "qcom,pm8010-rpmh-regulators"; 457 qcom,pmic-id = "m"; 458 459 vdd-l1-l2-supply = <&vreg_s1c_1p2>; 460 vdd-l3-l4-supply = <&vreg_bob2>; 461 vdd-l5-supply = <&vreg_s6c_1p8>; 462 vdd-l6-supply = <&vreg_bob1>; 463 vdd-l7-supply = <&vreg_bob1>; 464 465 vreg_l1m_1p1: ldo1 { 466 regulator-name = "vreg_l1m_1p1"; 467 regulator-min-microvolt = <1104000>; 468 regulator-max-microvolt = <1104000>; 469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 470 regulator-allow-set-load; 471 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 472 RPMH_REGULATOR_MODE_HPM>; 473 }; 474 475 vreg_l2m_1p056: ldo2 { 476 regulator-name = "vreg_l2m_1p056"; 477 regulator-min-microvolt = <1056000>; 478 regulator-max-microvolt = <1056000>; 479 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 480 regulator-allow-set-load; 481 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 482 RPMH_REGULATOR_MODE_HPM>; 483 }; 484 485 vreg_l3m_2p8: ldo3 { 486 regulator-name = "vreg_l3m_2p8"; 487 regulator-min-microvolt = <2800000>; 488 regulator-max-microvolt = <2800000>; 489 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 490 }; 491 492 vreg_l4m_2p8: ldo4 { 493 regulator-name = "vreg_l4m_2p8"; 494 regulator-min-microvolt = <2800000>; 495 regulator-max-microvolt = <2800000>; 496 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 497 }; 498 499 vreg_l5m_1p8: ldo5 { 500 regulator-name = "vreg_l5m_1p8"; 501 regulator-min-microvolt = <1800000>; 502 regulator-max-microvolt = <1800000>; 503 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 504 }; 505 506 vreg_l6m_2p8: ldo6 { 507 regulator-name = "vreg_l6m_2p8"; 508 regulator-min-microvolt = <2800000>; 509 regulator-max-microvolt = <2800000>; 510 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 511 }; 512 513 vreg_l7m_2p96: ldo7 { 514 regulator-name = "vreg_l7m_2p96"; 515 regulator-min-microvolt = <2960000>; 516 regulator-max-microvolt = <2960000>; 517 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 518 }; 519 }; 520 521 regulators-7 { 522 compatible = "qcom,pm8010-rpmh-regulators"; 523 qcom,pmic-id = "n"; 524 525 vdd-l1-l2-supply = <&vreg_s1c_1p2>; 526 vdd-l3-l4-supply = <&vreg_s6c_1p8>; 527 vdd-l5-supply = <&vreg_bob2>; 528 vdd-l6-supply = <&vreg_bob2>; 529 vdd-l7-supply = <&vreg_bob1>; 530 531 vreg_l1n_1p1: ldo1 { 532 regulator-name = "vreg_l1n_1p1"; 533 regulator-min-microvolt = <1104000>; 534 regulator-max-microvolt = <1104000>; 535 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 536 regulator-allow-set-load; 537 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 538 RPMH_REGULATOR_MODE_HPM>; 539 }; 540 541 vreg_l2n_1p056: ldo2 { 542 regulator-name = "vreg_l2n_1p056"; 543 regulator-min-microvolt = <1056000>; 544 regulator-max-microvolt = <1056000>; 545 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 546 regulator-allow-set-load; 547 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 548 RPMH_REGULATOR_MODE_HPM>; 549 }; 550 551 vreg_l3n_1p8: ldo3 { 552 regulator-name = "vreg_l3n_1p8"; 553 regulator-min-microvolt = <1800000>; 554 regulator-max-microvolt = <1800000>; 555 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 556 }; 557 558 vreg_l4n_1p8: ldo4 { 559 regulator-name = "vreg_l4n_1p8"; 560 regulator-min-microvolt = <1800000>; 561 regulator-max-microvolt = <1800000>; 562 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 563 }; 564 565 vreg_l5n_2p8: ldo5 { 566 regulator-name = "vreg_l5n_2p8"; 567 regulator-min-microvolt = <2800000>; 568 regulator-max-microvolt = <2800000>; 569 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 570 }; 571 572 vreg_l6n_2p8: ldo6 { 573 regulator-name = "vreg_l6n_2p8"; 574 regulator-min-microvolt = <2800000>; 575 regulator-max-microvolt = <2800000>; 576 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 577 }; 578 579 vreg_l7n_3p3: ldo7 { 580 regulator-name = "vreg_l7n_3p3"; 581 regulator-min-microvolt = <3304000>; 582 regulator-max-microvolt = <3304000>; 583 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 584 }; 585 }; 586}; 587 588&dispcc { 589 status = "okay"; 590}; 591 592&lpass_tlmm { 593 spkr_1_sd_n_active: spkr-1-sd-n-active-state { 594 pins = "gpio21"; 595 function = "gpio"; 596 drive-strength = <16>; 597 bias-disable; 598 output-low; 599 }; 600}; 601 602&mdss { 603 status = "okay"; 604}; 605 606&mdss_dsi0 { 607 vdda-supply = <&vreg_l3i_1p2>; 608 609 status = "okay"; 610 611 panel@0 { 612 compatible = "visionox,vtdr6130"; 613 reg = <0>; 614 615 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; 616 617 vddio-supply = <&vreg_l12b_1p8>; 618 vci-supply = <&vreg_l13b_3p0>; 619 vdd-supply = <&vreg_l11b_1p2>; 620 621 pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>; 622 pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>; 623 pinctrl-names = "default", "sleep"; 624 625 port { 626 panel0_in: endpoint { 627 remote-endpoint = <&mdss_dsi0_out>; 628 }; 629 }; 630 }; 631}; 632 633&mdss_dsi0_out { 634 remote-endpoint = <&panel0_in>; 635 data-lanes = <0 1 2 3>; 636}; 637 638&mdss_dsi0_phy { 639 vdds-supply = <&vreg_l1i_0p88>; 640 641 status = "okay"; 642}; 643 644&pcie0 { 645 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; 646 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; 647 648 pinctrl-0 = <&pcie0_default_state>; 649 pinctrl-names = "default"; 650 651 status = "okay"; 652}; 653 654&pcie0_phy { 655 vdda-phy-supply = <&vreg_l1i_0p88>; 656 vdda-pll-supply = <&vreg_l3i_1p2>; 657 658 status = "okay"; 659}; 660 661&pcie1 { 662 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; 663 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; 664 665 pinctrl-0 = <&pcie1_default_state>; 666 pinctrl-names = "default"; 667 668 status = "okay"; 669}; 670 671&pcie1_phy { 672 vdda-phy-supply = <&vreg_l3e_0p9>; 673 vdda-pll-supply = <&vreg_l3i_1p2>; 674 vdda-qref-supply = <&vreg_l1i_0p88>; 675 676 status = "okay"; 677}; 678 679&pm8550_gpios { 680 sdc2_card_det_n: sdc2-card-det-state { 681 pins = "gpio12"; 682 function = "normal"; 683 bias-pull-up; 684 input-enable; 685 output-disable; 686 power-source = <1>; /* 1.8 V */ 687 }; 688}; 689 690&pm8550b_eusb2_repeater { 691 vdd18-supply = <&vreg_l15b_1p8>; 692 vdd3-supply = <&vreg_l5b_3p1>; 693}; 694 695&qupv3_id_1 { 696 status = "okay"; 697}; 698 699&remoteproc_adsp { 700 firmware-name = "qcom/sm8650/adsp.mbn", 701 "qcom/sm8650/adsp_dtb.mbn"; 702 703 status = "okay"; 704}; 705 706&remoteproc_cdsp { 707 firmware-name = "qcom/sm8650/cdsp.mbn", 708 "qcom/sm8650/cdsp_dtb.mbn"; 709 710 status = "okay"; 711}; 712 713&remoteproc_mpss { 714 firmware-name = "qcom/sm8650/modem.mbn", 715 "qcom/sm8650/modem_dtb.mbn"; 716 717 status = "okay"; 718}; 719 720&sdhc_2 { 721 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; 722 723 vmmc-supply = <&vreg_l9b_2p9>; 724 vqmmc-supply = <&vreg_l8b_1p8>; 725 bus-width = <4>; 726 no-sdio; 727 no-mmc; 728 729 pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; 730 pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; 731 pinctrl-names = "default", "sleep"; 732 733 status = "okay"; 734}; 735 736&sleep_clk { 737 clock-frequency = <32000>; 738}; 739 740&swr0 { 741 status = "okay"; 742 743 /* WSA8845, Speaker Left */ 744 left_spkr: speaker@0,0 { 745 compatible = "sdw20217020400"; 746 reg = <0 0>; 747 pinctrl-0 = <&spkr_1_sd_n_active>; 748 pinctrl-names = "default"; 749 powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>; 750 #sound-dai-cells = <0>; 751 sound-name-prefix = "SpkrLeft"; 752 vdd-1p8-supply = <&vreg_l15b_1p8>; 753 vdd-io-supply = <&vreg_l3c_1p2>; 754 755 /* 756 * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) 757 * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) 758 * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) 759 * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) 760 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) 761 * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) 762 */ 763 qcom,port-mapping = <1 2 3 7 10 13>; 764 }; 765 766 /* WSA8845, Speaker Right */ 767 right_spkr: speaker@0,1 { 768 compatible = "sdw20217020400"; 769 reg = <0 1>; 770 pinctrl-0 = <&spkr_2_sd_n_active>; 771 pinctrl-names = "default"; 772 powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; 773 #sound-dai-cells = <0>; 774 sound-name-prefix = "SpkrRight"; 775 vdd-1p8-supply = <&vreg_l15b_1p8>; 776 vdd-io-supply = <&vreg_l3c_1p2>; 777 778 /* 779 * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) 780 * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) 781 * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) 782 * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) 783 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) 784 * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) 785 */ 786 qcom,port-mapping = <4 5 6 7 11 13>; 787 }; 788}; 789 790&tlmm { 791 /* Reserved I/Os for NFC */ 792 gpio-reserved-ranges = <32 8>, <74 1>; 793 794 disp0_reset_n_active: disp0-reset-n-active-state { 795 pins = "gpio133"; 796 function = "gpio"; 797 drive-strength = <8>; 798 bias-disable; 799 }; 800 801 disp0_reset_n_suspend: disp0-reset-n-suspend-state { 802 pins = "gpio133"; 803 function = "gpio"; 804 drive-strength = <2>; 805 bias-pull-down; 806 }; 807 808 mdp_vsync_active: mdp-vsync-active-state { 809 pins = "gpio86"; 810 function = "mdp_vsync"; 811 drive-strength = <2>; 812 bias-pull-down; 813 }; 814 815 mdp_vsync_suspend: mdp-vsync-suspend-state { 816 pins = "gpio86"; 817 function = "mdp_vsync"; 818 drive-strength = <2>; 819 bias-pull-down; 820 }; 821 822 spkr_2_sd_n_active: spkr-2-sd-n-active-state { 823 pins = "gpio77"; 824 function = "gpio"; 825 drive-strength = <16>; 826 bias-disable; 827 output-low; 828 }; 829}; 830 831&uart15 { 832 status = "okay"; 833}; 834 835&ufs_mem_hc { 836 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; 837 838 vcc-supply = <&vreg_l17b_2p5>; 839 vcc-max-microamp = <1300000>; 840 vccq-supply = <&vreg_l1c_1p2>; 841 vccq-max-microamp = <1200000>; 842 843 status = "okay"; 844}; 845 846&ufs_mem_phy { 847 vdda-phy-supply = <&vreg_l1d_0p88>; 848 vdda-pll-supply = <&vreg_l3i_1p2>; 849 850 status = "okay"; 851}; 852 853/* 854 * DPAUX -> WCD9395 -> USB_SBU -> USB-C 855 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C 856 * USB SS -> USB-C 857 */ 858 859&usb_1 { 860 status = "okay"; 861}; 862 863&usb_1_dwc3 { 864 dr_mode = "otg"; 865 usb-role-switch; 866}; 867 868&usb_1_dwc3_hs { 869 remote-endpoint = <&pmic_glink_hs_in>; 870}; 871 872&usb_1_hsphy { 873 vdd-supply = <&vreg_l1i_0p88>; 874 vdda12-supply = <&vreg_l3i_1p2>; 875 876 phys = <&pm8550b_eusb2_repeater>; 877 878 status = "okay"; 879}; 880 881&usb_dp_qmpphy { 882 vdda-phy-supply = <&vreg_l3i_1p2>; 883 vdda-pll-supply = <&vreg_l3g_0p91>; 884 885 status = "okay"; 886}; 887 888&usb_dp_qmpphy_out { 889 remote-endpoint = <&pmic_glink_ss_in>; 890}; 891 892&xo_board { 893 clock-frequency = <76800000>; 894}; 895