1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2024, Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/leds/common.h> 9#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 10#include "sm8650.dtsi" 11#include "pm8010.dtsi" 12#include "pm8550.dtsi" 13#include "pm8550b.dtsi" 14#define PMK8550VE_SID 8 15#include "pm8550ve.dtsi" 16#include "pm8550vs.dtsi" 17#include "pmk8550.dtsi" 18 19/ { 20 model = "Qualcomm Technologies, Inc. SM8650 HDK"; 21 compatible = "qcom,sm8650-hdk", "qcom,sm8650"; 22 chassis-type = "embedded"; 23 24 aliases { 25 serial0 = &uart15; 26 serial1 = &uart14; 27 }; 28 29 chosen { 30 stdout-path = "serial0:115200n8"; 31 }; 32 33 hdmi-out { 34 compatible = "hdmi-connector"; 35 type = "a"; 36 37 port { 38 hdmi_connector_out: endpoint { 39 remote-endpoint = <<9611_out>; 40 }; 41 }; 42 }; 43 44 gpio-keys { 45 compatible = "gpio-keys"; 46 47 pinctrl-0 = <&volume_up_n>; 48 pinctrl-names = "default"; 49 50 key-volume-up { 51 label = "Volume Up"; 52 linux,code = <KEY_VOLUMEUP>; 53 gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; 54 debounce-interval = <15>; 55 linux,can-disable; 56 wakeup-source; 57 }; 58 }; 59 60 leds { 61 compatible = "gpio-leds"; 62 63 led-0 { 64 function = LED_FUNCTION_BLUETOOTH; 65 color = <LED_COLOR_ID_BLUE>; 66 gpios = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>; 67 linux,default-trigger = "bluetooth-power"; 68 default-state = "off"; 69 }; 70 71 led-1 { 72 function = LED_FUNCTION_INDICATOR; 73 color = <LED_COLOR_ID_GREEN>; 74 gpios = <&pm8550b_gpios 9 GPIO_ACTIVE_HIGH>; 75 default-state = "off"; 76 panic-indicator; 77 }; 78 79 led-2 { 80 function = LED_FUNCTION_WLAN; 81 color = <LED_COLOR_ID_ORANGE>; 82 gpios = <&pm8550b_gpios 10 GPIO_ACTIVE_HIGH>; 83 linux,default-trigger = "phy0tx"; 84 default-state = "off"; 85 }; 86 }; 87 88 pmic-glink { 89 compatible = "qcom,sm8650-pmic-glink", 90 "qcom,sm8550-pmic-glink", 91 "qcom,pmic-glink"; 92 #address-cells = <1>; 93 #size-cells = <0>; 94 orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; 95 96 connector@0 { 97 compatible = "usb-c-connector"; 98 reg = <0>; 99 100 power-role = "dual"; 101 data-role = "dual"; 102 103 ports { 104 #address-cells = <1>; 105 #size-cells = <0>; 106 107 port@0 { 108 reg = <0>; 109 110 pmic_glink_hs_in: endpoint { 111 remote-endpoint = <&usb_1_dwc3_hs>; 112 }; 113 }; 114 115 port@1 { 116 reg = <1>; 117 118 pmic_glink_ss_in: endpoint { 119 remote-endpoint = <&usb_dp_qmpphy_out>; 120 }; 121 }; 122 123 port@2 { 124 reg = <2>; 125 126 pmic_glink_sbu: endpoint { 127 remote-endpoint = <&wcd_usbss_sbu_mux>; 128 }; 129 }; 130 }; 131 }; 132 }; 133 134 lt9611_1v2: regulator-lt9611-1v2 { 135 compatible = "regulator-fixed"; 136 137 regulator-name = "LT9611_1V2"; 138 regulator-min-microvolt = <1200000>; 139 regulator-max-microvolt = <1200000>; 140 141 vin-supply = <&vph_pwr>; 142 gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>; 143 144 enable-active-high; 145 }; 146 147 lt9611_3v3: regulator-lt9611-3v3 { 148 compatible = "regulator-fixed"; 149 150 regulator-name = "LT9611_3V3"; 151 regulator-min-microvolt = <3300000>; 152 regulator-max-microvolt = <3300000>; 153 154 vin-supply = <&vreg_bob_3v3>; 155 gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>; 156 157 enable-active-high; 158 }; 159 160 sound { 161 compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; 162 model = "SM8650-HDK"; 163 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", 164 "SpkrRight IN", "WSA_SPK2 OUT", 165 "IN1_HPHL", "HPHL_OUT", 166 "IN2_HPHR", "HPHR_OUT", 167 "AMIC1", "MIC BIAS1", 168 "AMIC2", "MIC BIAS2", 169 "AMIC5", "MIC BIAS4", 170 "TX SWR_INPUT0", "ADC1_OUTPUT", 171 "TX SWR_INPUT1", "ADC2_OUTPUT", 172 "TX SWR_INPUT3", "ADC4_OUTPUT"; 173 174 wcd-playback-dai-link { 175 link-name = "WCD Playback"; 176 177 cpu { 178 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 179 }; 180 181 codec { 182 sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; 183 }; 184 185 platform { 186 sound-dai = <&q6apm>; 187 }; 188 }; 189 190 wcd-capture-dai-link { 191 link-name = "WCD Capture"; 192 193 cpu { 194 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 195 }; 196 197 codec { 198 sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; 199 }; 200 201 platform { 202 sound-dai = <&q6apm>; 203 }; 204 }; 205 206 wsa-dai-link { 207 link-name = "WSA Playback"; 208 209 cpu { 210 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 211 }; 212 213 codec { 214 sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; 215 }; 216 217 platform { 218 sound-dai = <&q6apm>; 219 }; 220 }; 221 }; 222 223 vph_pwr: regulator-vph-pwr { 224 compatible = "regulator-fixed"; 225 226 regulator-name = "vph_pwr"; 227 regulator-min-microvolt = <3700000>; 228 regulator-max-microvolt = <3700000>; 229 230 regulator-always-on; 231 regulator-boot-on; 232 }; 233 234 vreg_bob_3v3: regulator-vreg-bob-3v3 { 235 compatible = "regulator-fixed"; 236 237 regulator-name = "VREG_BOB_3P3"; 238 regulator-min-microvolt = <3300000>; 239 regulator-max-microvolt = <3300000>; 240 241 vin-supply = <&vph_pwr>; 242 }; 243 244 wcd939x: audio-codec { 245 compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; 246 247 pinctrl-0 = <&wcd_default>; 248 pinctrl-names = "default"; 249 250 qcom,micbias1-microvolt = <1800000>; 251 qcom,micbias2-microvolt = <1800000>; 252 qcom,micbias3-microvolt = <1800000>; 253 qcom,micbias4-microvolt = <1800000>; 254 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 255 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 256 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 257 qcom,rx-device = <&wcd_rx>; 258 qcom,tx-device = <&wcd_tx>; 259 260 reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; 261 262 vdd-buck-supply = <&vreg_l15b_1p8>; 263 vdd-rxtx-supply = <&vreg_l15b_1p8>; 264 vdd-io-supply = <&vreg_l15b_1p8>; 265 vdd-mic-bias-supply = <&vreg_bob1>; 266 267 #sound-dai-cells = <1>; 268 }; 269 270 wcn7850-pmu { 271 compatible = "qcom,wcn7850-pmu"; 272 273 pinctrl-names = "default"; 274 pinctrl-0 = <&wlan_en>; 275 276 wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; 277 /* 278 * TODO Add bt-enable-gpios once the Bluetooth driver is 279 * converted to using the power sequencer. 280 */ 281 282 vdd-supply = <&vreg_s4i_0p85>; 283 vddio-supply = <&vreg_l15b_1p8>; 284 vddio1p2-supply = <&vreg_l3c_1p2>; 285 vddaon-supply = <&vreg_s2c_0p8>; 286 vdddig-supply = <&vreg_s3c_0p9>; 287 vddrfa1p2-supply = <&vreg_s1c_1p2>; 288 vddrfa1p8-supply = <&vreg_s6c_1p8>; 289 290 clocks = <&rpmhcc RPMH_RF_CLK1>; 291 292 regulators { 293 vreg_pmu_rfa_cmn: ldo0 { 294 regulator-name = "vreg_pmu_rfa_cmn"; 295 }; 296 297 vreg_pmu_aon_0p59: ldo1 { 298 regulator-name = "vreg_pmu_aon_0p59"; 299 }; 300 301 vreg_pmu_wlcx_0p8: ldo2 { 302 regulator-name = "vreg_pmu_wlcx_0p8"; 303 }; 304 305 vreg_pmu_wlmx_0p85: ldo3 { 306 regulator-name = "vreg_pmu_wlmx_0p85"; 307 }; 308 309 vreg_pmu_btcmx_0p85: ldo4 { 310 regulator-name = "vreg_pmu_btcmx_0p85"; 311 }; 312 313 vreg_pmu_rfa_0p8: ldo5 { 314 regulator-name = "vreg_pmu_rfa_0p8"; 315 }; 316 317 vreg_pmu_rfa_1p2: ldo6 { 318 regulator-name = "vreg_pmu_rfa_1p2"; 319 }; 320 321 vreg_pmu_rfa_1p8: ldo7 { 322 regulator-name = "vreg_pmu_rfa_1p8"; 323 }; 324 325 vreg_pmu_pcie_0p9: ldo8 { 326 regulator-name = "vreg_pmu_pcie_0p9"; 327 }; 328 329 vreg_pmu_pcie_1p8: ldo9 { 330 regulator-name = "vreg_pmu_pcie_1p8"; 331 }; 332 }; 333 }; 334}; 335 336&apps_rsc { 337 regulators-0 { 338 compatible = "qcom,pm8550-rpmh-regulators"; 339 340 vdd-bob1-supply = <&vph_pwr>; 341 vdd-bob2-supply = <&vph_pwr>; 342 vdd-l2-l13-l14-supply = <&vreg_bob1>; 343 vdd-l3-supply = <&vreg_s1c_1p2>; 344 vdd-l5-l16-supply = <&vreg_bob1>; 345 vdd-l6-l7-supply = <&vreg_bob1>; 346 vdd-l8-l9-supply = <&vreg_bob1>; 347 vdd-l11-supply = <&vreg_s1c_1p2>; 348 vdd-l12-supply = <&vreg_s6c_1p8>; 349 vdd-l15-supply = <&vreg_s6c_1p8>; 350 vdd-l17-supply = <&vreg_bob2>; 351 352 qcom,pmic-id = "b"; 353 354 vreg_bob1: bob1 { 355 regulator-name = "vreg_bob1"; 356 regulator-min-microvolt = <3296000>; 357 regulator-max-microvolt = <3960000>; 358 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 359 }; 360 361 vreg_bob2: bob2 { 362 regulator-name = "vreg_bob2"; 363 regulator-min-microvolt = <2720000>; 364 regulator-max-microvolt = <3008000>; 365 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 366 }; 367 368 vreg_l2b_3p0: ldo2 { 369 regulator-name = "vreg_l2b_3p0"; 370 regulator-min-microvolt = <3008000>; 371 regulator-max-microvolt = <3008000>; 372 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 373 regulator-allow-set-load; 374 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 375 RPMH_REGULATOR_MODE_HPM>; 376 }; 377 378 vreg_l5b_3p1: ldo5 { 379 regulator-name = "vreg_l5b_3p1"; 380 regulator-min-microvolt = <3104000>; 381 regulator-max-microvolt = <3104000>; 382 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 383 regulator-allow-set-load; 384 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 385 RPMH_REGULATOR_MODE_HPM>; 386 }; 387 388 vreg_l6b_1p8: ldo6 { 389 regulator-name = "vreg_l6b_1p8"; 390 regulator-min-microvolt = <1800000>; 391 regulator-max-microvolt = <3008000>; 392 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 393 regulator-allow-set-load; 394 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 395 RPMH_REGULATOR_MODE_HPM>; 396 }; 397 398 vreg_l7b_1p8: ldo7 { 399 regulator-name = "vreg_l7b_1p8"; 400 regulator-min-microvolt = <1800000>; 401 regulator-max-microvolt = <3008000>; 402 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 403 }; 404 405 vreg_l8b_1p8: ldo8 { 406 regulator-name = "vreg_l8b_1p8"; 407 regulator-min-microvolt = <1800000>; 408 regulator-max-microvolt = <3008000>; 409 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 410 regulator-allow-set-load; 411 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 412 RPMH_REGULATOR_MODE_HPM>; 413 }; 414 415 vreg_l9b_2p9: ldo9 { 416 regulator-name = "vreg_l9b_2p9"; 417 regulator-min-microvolt = <2960000>; 418 regulator-max-microvolt = <3008000>; 419 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 420 regulator-allow-set-load; 421 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 422 RPMH_REGULATOR_MODE_HPM>; 423 }; 424 425 vreg_l11b_1p2: ldo11 { 426 regulator-name = "vreg_l11b_1p2"; 427 regulator-min-microvolt = <1200000>; 428 regulator-max-microvolt = <1504000>; 429 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 430 regulator-allow-set-load; 431 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 432 RPMH_REGULATOR_MODE_HPM>; 433 }; 434 435 vreg_l12b_1p8: ldo12 { 436 regulator-name = "vreg_l12b_1p8"; 437 regulator-min-microvolt = <1800000>; 438 regulator-max-microvolt = <1800000>; 439 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 440 regulator-allow-set-load; 441 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 442 RPMH_REGULATOR_MODE_HPM>; 443 }; 444 445 vreg_l13b_3p0: ldo13 { 446 regulator-name = "vreg_l13b_3p0"; 447 regulator-min-microvolt = <3000000>; 448 regulator-max-microvolt = <3000000>; 449 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 450 regulator-allow-set-load; 451 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 452 RPMH_REGULATOR_MODE_HPM>; 453 }; 454 455 vreg_l14b_3p2: ldo14 { 456 regulator-name = "vreg_l14b_3p2"; 457 regulator-min-microvolt = <3200000>; 458 regulator-max-microvolt = <3200000>; 459 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 460 regulator-allow-set-load; 461 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 462 RPMH_REGULATOR_MODE_HPM>; 463 }; 464 465 vreg_l15b_1p8: ldo15 { 466 regulator-name = "vreg_l15b_1p8"; 467 regulator-min-microvolt = <1800000>; 468 regulator-max-microvolt = <1800000>; 469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 470 regulator-allow-set-load; 471 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 472 RPMH_REGULATOR_MODE_HPM>; 473 }; 474 475 vreg_l16b_2p8: ldo16 { 476 regulator-name = "vreg_l16b_2p8"; 477 regulator-min-microvolt = <2800000>; 478 regulator-max-microvolt = <2800000>; 479 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 480 regulator-allow-set-load; 481 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 482 RPMH_REGULATOR_MODE_HPM>; 483 }; 484 485 vreg_l17b_2p5: ldo17 { 486 regulator-name = "vreg_l17b_2p5"; 487 regulator-min-microvolt = <2504000>; 488 regulator-max-microvolt = <2504000>; 489 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 490 regulator-allow-set-load; 491 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 492 RPMH_REGULATOR_MODE_HPM>; 493 }; 494 }; 495 496 regulators-1 { 497 compatible = "qcom,pm8550vs-rpmh-regulators"; 498 499 vdd-l1-supply = <&vreg_s1c_1p2>; 500 vdd-l2-supply = <&vreg_s1c_1p2>; 501 vdd-l3-supply = <&vreg_s1c_1p2>; 502 vdd-s1-supply = <&vph_pwr>; 503 vdd-s2-supply = <&vph_pwr>; 504 vdd-s3-supply = <&vph_pwr>; 505 vdd-s4-supply = <&vph_pwr>; 506 vdd-s5-supply = <&vph_pwr>; 507 vdd-s6-supply = <&vph_pwr>; 508 509 qcom,pmic-id = "c"; 510 511 vreg_s1c_1p2: smps1 { 512 regulator-name = "vreg_s1c_1p2"; 513 regulator-min-microvolt = <1256000>; 514 regulator-max-microvolt = <1348000>; 515 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 516 }; 517 518 vreg_s2c_0p8: smps2 { 519 regulator-name = "vreg_s2c_0p8"; 520 regulator-min-microvolt = <852000>; 521 regulator-max-microvolt = <1036000>; 522 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 523 }; 524 525 vreg_s3c_0p9: smps3 { 526 regulator-name = "vreg_s3c_0p9"; 527 regulator-min-microvolt = <976000>; 528 regulator-max-microvolt = <1064000>; 529 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 530 }; 531 532 vreg_s4c_1p2: smps4 { 533 regulator-name = "vreg_s4c_1p2"; 534 regulator-min-microvolt = <1224000>; 535 regulator-max-microvolt = <1280000>; 536 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 537 }; 538 539 vreg_s5c_0p7: smps5 { 540 regulator-name = "vreg_s5c_0p7"; 541 regulator-min-microvolt = <752000>; 542 regulator-max-microvolt = <900000>; 543 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 544 }; 545 546 vreg_s6c_1p8: smps6 { 547 regulator-name = "vreg_s6c_1p8"; 548 regulator-min-microvolt = <1856000>; 549 regulator-max-microvolt = <2000000>; 550 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 551 }; 552 553 vreg_l1c_1p2: ldo1 { 554 regulator-name = "vreg_l1c_1p2"; 555 regulator-min-microvolt = <1200000>; 556 regulator-max-microvolt = <1200000>; 557 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 558 regulator-allow-set-load; 559 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 560 RPMH_REGULATOR_MODE_HPM>; 561 }; 562 563 vreg_l3c_1p2: ldo3 { 564 regulator-name = "vreg_l3c_1p2"; 565 regulator-min-microvolt = <1200000>; 566 regulator-max-microvolt = <1200000>; 567 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 568 regulator-allow-set-load; 569 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 570 RPMH_REGULATOR_MODE_HPM>; 571 }; 572 }; 573 574 regulators-2 { 575 compatible = "qcom,pm8550vs-rpmh-regulators"; 576 577 vdd-l1-supply = <&vreg_s3c_0p9>; 578 579 qcom,pmic-id = "d"; 580 581 vreg_l1d_0p88: ldo1 { 582 regulator-name = "vreg_l1d_0p88"; 583 regulator-min-microvolt = <912000>; 584 regulator-max-microvolt = <920000>; 585 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 586 regulator-allow-set-load; 587 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 588 RPMH_REGULATOR_MODE_HPM>; 589 }; 590 }; 591 592 regulators-3 { 593 compatible = "qcom,pm8550vs-rpmh-regulators"; 594 595 vdd-l3-supply = <&vreg_s3c_0p9>; 596 597 qcom,pmic-id = "e"; 598 599 vreg_l3e_0p9: ldo3 { 600 regulator-name = "vreg_l3e_0p9"; 601 regulator-min-microvolt = <880000>; 602 regulator-max-microvolt = <920000>; 603 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 604 regulator-allow-set-load; 605 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 606 RPMH_REGULATOR_MODE_HPM>; 607 }; 608 }; 609 610 regulators-4 { 611 compatible = "qcom,pm8550vs-rpmh-regulators"; 612 613 vdd-l1-supply = <&vreg_s3c_0p9>; 614 vdd-l3-supply = <&vreg_s3c_0p9>; 615 616 qcom,pmic-id = "g"; 617 618 vreg_l1g_0p91: ldo1 { 619 regulator-name = "vreg_l1g_0p91"; 620 regulator-min-microvolt = <912000>; 621 regulator-max-microvolt = <920000>; 622 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 623 regulator-allow-set-load; 624 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 625 RPMH_REGULATOR_MODE_HPM>; 626 }; 627 628 vreg_l3g_0p91: ldo3 { 629 regulator-name = "vreg_l3g_0p91"; 630 regulator-min-microvolt = <880000>; 631 regulator-max-microvolt = <912000>; 632 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 633 regulator-allow-set-load; 634 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 635 RPMH_REGULATOR_MODE_HPM>; 636 }; 637 }; 638 639 regulators-5 { 640 compatible = "qcom,pm8550ve-rpmh-regulators"; 641 642 vdd-l1-supply = <&vreg_s3c_0p9>; 643 vdd-l2-supply = <&vreg_s3c_0p9>; 644 vdd-l3-supply = <&vreg_s1c_1p2>; 645 vdd-s4-supply = <&vph_pwr>; 646 647 qcom,pmic-id = "i"; 648 649 vreg_s4i_0p85: smps4 { 650 regulator-name = "vreg_s4i_0p85"; 651 regulator-min-microvolt = <852000>; 652 regulator-max-microvolt = <1004000>; 653 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 654 }; 655 656 vreg_l1i_0p88: ldo1 { 657 regulator-name = "vreg_l1i_0p88"; 658 regulator-min-microvolt = <880000>; 659 regulator-max-microvolt = <912000>; 660 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 661 regulator-allow-set-load; 662 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 663 RPMH_REGULATOR_MODE_HPM>; 664 }; 665 666 vreg_l2i_0p88: ldo2 { 667 regulator-name = "vreg_l2i_0p88"; 668 regulator-min-microvolt = <880000>; 669 regulator-max-microvolt = <912000>; 670 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 671 regulator-allow-set-load; 672 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 673 RPMH_REGULATOR_MODE_HPM>; 674 }; 675 676 vreg_l3i_1p2: ldo3 { 677 regulator-name = "vreg_l3i_0p91"; 678 regulator-min-microvolt = <1200000>; 679 regulator-max-microvolt = <1200000>; 680 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 681 regulator-allow-set-load; 682 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 683 RPMH_REGULATOR_MODE_HPM>; 684 }; 685 }; 686 687 regulators-6 { 688 compatible = "qcom,pm8010-rpmh-regulators"; 689 qcom,pmic-id = "m"; 690 691 vdd-l1-l2-supply = <&vreg_s1c_1p2>; 692 vdd-l3-l4-supply = <&vreg_bob2>; 693 vdd-l5-supply = <&vreg_s6c_1p8>; 694 vdd-l6-supply = <&vreg_bob1>; 695 vdd-l7-supply = <&vreg_bob1>; 696 697 vreg_l1m_1p1: ldo1 { 698 regulator-name = "vreg_l1m_1p1"; 699 regulator-min-microvolt = <1104000>; 700 regulator-max-microvolt = <1104000>; 701 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 702 regulator-allow-set-load; 703 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 704 RPMH_REGULATOR_MODE_HPM>; 705 }; 706 707 vreg_l2m_1p056: ldo2 { 708 regulator-name = "vreg_l2m_1p056"; 709 regulator-min-microvolt = <1056000>; 710 regulator-max-microvolt = <1056000>; 711 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 712 regulator-allow-set-load; 713 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 714 RPMH_REGULATOR_MODE_HPM>; 715 }; 716 717 vreg_l3m_2p8: ldo3 { 718 regulator-name = "vreg_l3m_2p8"; 719 regulator-min-microvolt = <2800000>; 720 regulator-max-microvolt = <2800000>; 721 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 722 }; 723 724 vreg_l4m_2p8: ldo4 { 725 regulator-name = "vreg_l4m_2p8"; 726 regulator-min-microvolt = <2800000>; 727 regulator-max-microvolt = <2800000>; 728 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 729 }; 730 731 vreg_l5m_1p8: ldo5 { 732 regulator-name = "vreg_l5m_1p8"; 733 regulator-min-microvolt = <1800000>; 734 regulator-max-microvolt = <1800000>; 735 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 736 }; 737 738 vreg_l6m_2p8: ldo6 { 739 regulator-name = "vreg_l6m_2p8"; 740 regulator-min-microvolt = <2800000>; 741 regulator-max-microvolt = <2800000>; 742 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 743 }; 744 745 vreg_l7m_2p96: ldo7 { 746 regulator-name = "vreg_l7m_2p96"; 747 regulator-min-microvolt = <2960000>; 748 regulator-max-microvolt = <2960000>; 749 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 750 }; 751 }; 752 753 regulators-7 { 754 compatible = "qcom,pm8010-rpmh-regulators"; 755 qcom,pmic-id = "n"; 756 757 vdd-l1-l2-supply = <&vreg_s1c_1p2>; 758 vdd-l3-l4-supply = <&vreg_s6c_1p8>; 759 vdd-l5-supply = <&vreg_bob2>; 760 vdd-l6-supply = <&vreg_bob2>; 761 vdd-l7-supply = <&vreg_bob1>; 762 763 vreg_l1n_1p1: ldo1 { 764 regulator-name = "vreg_l1n_1p1"; 765 regulator-min-microvolt = <1104000>; 766 regulator-max-microvolt = <1104000>; 767 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 768 regulator-allow-set-load; 769 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 770 RPMH_REGULATOR_MODE_HPM>; 771 }; 772 773 vreg_l2n_1p056: ldo2 { 774 regulator-name = "vreg_l2n_1p056"; 775 regulator-min-microvolt = <1056000>; 776 regulator-max-microvolt = <1056000>; 777 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 778 regulator-allow-set-load; 779 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 780 RPMH_REGULATOR_MODE_HPM>; 781 }; 782 783 vreg_l3n_1p8: ldo3 { 784 regulator-name = "vreg_l3n_1p8"; 785 regulator-min-microvolt = <1800000>; 786 regulator-max-microvolt = <1800000>; 787 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 788 }; 789 790 vreg_l4n_1p8: ldo4 { 791 regulator-name = "vreg_l4n_1p8"; 792 regulator-min-microvolt = <1800000>; 793 regulator-max-microvolt = <1800000>; 794 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 795 }; 796 797 vreg_l5n_2p8: ldo5 { 798 regulator-name = "vreg_l5n_2p8"; 799 regulator-min-microvolt = <2800000>; 800 regulator-max-microvolt = <2800000>; 801 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 802 }; 803 804 vreg_l6n_2p8: ldo6 { 805 regulator-name = "vreg_l6n_2p8"; 806 regulator-min-microvolt = <2800000>; 807 regulator-max-microvolt = <2800000>; 808 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 809 }; 810 811 vreg_l7n_3p3: ldo7 { 812 regulator-name = "vreg_l7n_3p3"; 813 regulator-min-microvolt = <3304000>; 814 regulator-max-microvolt = <3304000>; 815 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 816 }; 817 }; 818}; 819 820&dispcc { 821 status = "okay"; 822}; 823 824&gpi_dma1 { 825 status = "okay"; 826}; 827 828&i2c3 { 829 status = "okay"; 830 831 wcd_usbss: typec-mux@e { 832 compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss"; 833 reg = <0xe>; 834 835 vdd-supply = <&vreg_l15b_1p8>; 836 reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>; 837 838 mode-switch; 839 orientation-switch; 840 841 ports { 842 #address-cells = <1>; 843 #size-cells = <0>; 844 845 port@0 { 846 reg = <0>; 847 848 wcd_usbss_sbu_mux: endpoint { 849 remote-endpoint = <&pmic_glink_sbu>; 850 }; 851 }; 852 }; 853 }; 854}; 855 856&i2c6 { 857 clock-frequency = <400000>; 858 status = "okay"; 859 860 lt9611_codec: hdmi-bridge@2b { 861 compatible = "lontium,lt9611uxc"; 862 reg = <0x2b>; 863 864 interrupts-extended = <&tlmm 85 IRQ_TYPE_EDGE_FALLING>; 865 866 reset-gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; 867 868 vdd-supply = <<9611_1v2>; 869 vcc-supply = <<9611_3v3>; 870 871 pinctrl-0 = <<9611_irq_pin>, <<9611_rst_pin>; 872 pinctrl-names = "default"; 873 874 ports { 875 #address-cells = <1>; 876 #size-cells = <0>; 877 878 port@0 { 879 reg = <0>; 880 881 lt9611_a: endpoint { 882 remote-endpoint = <&mdss_dsi0_out>; 883 }; 884 }; 885 886 port@2 { 887 reg = <2>; 888 889 lt9611_out: endpoint { 890 remote-endpoint = <&hdmi_connector_out>; 891 }; 892 }; 893 }; 894 }; 895}; 896 897&ipa { 898 qcom,gsi-loader = "self"; 899 memory-region = <&ipa_fw_mem>; 900 firmware-name = "qcom/sm8650/ipa_fws.mbn"; 901 status = "okay"; 902}; 903 904&gpu { 905 status = "okay"; 906 907 zap-shader { 908 firmware-name = "qcom/sm8650/gen70900_zap.mbn"; 909 }; 910}; 911 912&lpass_tlmm { 913 spkr_1_sd_n_active: spkr-1-sd-n-active-state { 914 pins = "gpio21"; 915 function = "gpio"; 916 drive-strength = <16>; 917 bias-disable; 918 output-low; 919 }; 920}; 921 922&mdss { 923 status = "okay"; 924}; 925 926&mdss_dsi0 { 927 vdda-supply = <&vreg_l3i_1p2>; 928 929 status = "okay"; 930}; 931 932&mdss_dsi0_out { 933 remote-endpoint = <<9611_a>; 934 data-lanes = <0 1 2 3>; 935}; 936 937&mdss_dsi0_phy { 938 vdds-supply = <&vreg_l1i_0p88>; 939 940 status = "okay"; 941}; 942 943&mdss_dp0 { 944 status = "okay"; 945}; 946 947&mdss_dp0_out { 948 data-lanes = <0 1>; 949}; 950 951&pcie0 { 952 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; 953 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; 954 955 pinctrl-0 = <&pcie0_default_state>; 956 pinctrl-names = "default"; 957 958 status = "okay"; 959}; 960 961&pcieport0 { 962 wifi@0 { 963 compatible = "pci17cb,1107"; 964 reg = <0x10000 0x0 0x0 0x0 0x0>; 965 966 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; 967 vddaon-supply = <&vreg_pmu_aon_0p59>; 968 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; 969 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>; 970 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; 971 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; 972 vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>; 973 vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; 974 vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; 975 }; 976}; 977 978&pcie0_phy { 979 vdda-phy-supply = <&vreg_l1i_0p88>; 980 vdda-pll-supply = <&vreg_l3i_1p2>; 981 982 status = "okay"; 983}; 984 985&pcie1 { 986 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; 987 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; 988 989 pinctrl-0 = <&pcie1_default_state>; 990 pinctrl-names = "default"; 991 992 status = "okay"; 993}; 994 995&pcie1_phy { 996 vdda-phy-supply = <&vreg_l3e_0p9>; 997 vdda-pll-supply = <&vreg_l3i_1p2>; 998 vdda-qref-supply = <&vreg_l1i_0p88>; 999 1000 status = "okay"; 1001}; 1002 1003&pm8550_gpios { 1004 sdc2_card_det_n: sdc2-card-det-state { 1005 pins = "gpio12"; 1006 function = "normal"; 1007 bias-pull-up; 1008 input-enable; 1009 output-disable; 1010 power-source = <1>; /* 1.8 V */ 1011 }; 1012 1013 volume_up_n: volume-up-n-state { 1014 pins = "gpio6"; 1015 function = "normal"; 1016 bias-pull-up; 1017 input-enable; 1018 power-source = <1>; 1019 }; 1020}; 1021 1022/* The RGB signals are routed to 3 separate LEDs on the HDK8650 */ 1023&pm8550_pwm { 1024 #address-cells = <1>; 1025 #size-cells = <0>; 1026 1027 status = "okay"; 1028 1029 led@1 { 1030 reg = <1>; 1031 function = LED_FUNCTION_STATUS; 1032 color = <LED_COLOR_ID_RED>; 1033 default-state = "off"; 1034 }; 1035 1036 led@2 { 1037 reg = <2>; 1038 function = LED_FUNCTION_STATUS; 1039 color = <LED_COLOR_ID_GREEN>; 1040 default-state = "off"; 1041 }; 1042 1043 led@3 { 1044 reg = <3>; 1045 function = LED_FUNCTION_STATUS; 1046 color = <LED_COLOR_ID_BLUE>; 1047 default-state = "off"; 1048 }; 1049}; 1050 1051&pm8550b_eusb2_repeater { 1052 vdd18-supply = <&vreg_l15b_1p8>; 1053 vdd3-supply = <&vreg_l5b_3p1>; 1054}; 1055 1056&pmk8550_rtc { 1057 status = "okay"; 1058}; 1059 1060&pon_pwrkey { 1061 status = "okay"; 1062}; 1063 1064&pon_resin { 1065 linux,code = <KEY_VOLUMEDOWN>; 1066 1067 status = "okay"; 1068}; 1069 1070&qup_i2c3_data_clk { 1071 /* Use internal I2C pull-up */ 1072 bias-pull-up = <2200>; 1073}; 1074 1075&qupv3_id_0 { 1076 iommus = <&apps_smmu 0xa3 0x3>; 1077 1078 status = "okay"; 1079}; 1080 1081&qupv3_id_1 { 1082 status = "okay"; 1083}; 1084 1085&remoteproc_adsp { 1086 firmware-name = "qcom/sm8650/adsp.mbn", 1087 "qcom/sm8650/adsp_dtb.mbn"; 1088 1089 status = "okay"; 1090}; 1091 1092&remoteproc_cdsp { 1093 firmware-name = "qcom/sm8650/cdsp.mbn", 1094 "qcom/sm8650/cdsp_dtb.mbn"; 1095 1096 status = "okay"; 1097}; 1098 1099&remoteproc_mpss { 1100 firmware-name = "qcom/sm8650/modem.mbn", 1101 "qcom/sm8650/modem_dtb.mbn"; 1102 1103 status = "okay"; 1104}; 1105 1106&sdhc_2 { 1107 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>; 1108 1109 vmmc-supply = <&vreg_l9b_2p9>; 1110 vqmmc-supply = <&vreg_l8b_1p8>; 1111 bus-width = <4>; 1112 no-sdio; 1113 no-mmc; 1114 1115 pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; 1116 pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; 1117 pinctrl-names = "default", "sleep"; 1118 1119 status = "okay"; 1120}; 1121 1122&sleep_clk { 1123 clock-frequency = <32000>; 1124}; 1125 1126&swr0 { 1127 status = "okay"; 1128 1129 /* WSA8845, Speaker North */ 1130 north_spkr: speaker@0,0 { 1131 compatible = "sdw20217020400"; 1132 reg = <0 0>; 1133 pinctrl-0 = <&spkr_1_sd_n_active>; 1134 pinctrl-names = "default"; 1135 powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>; 1136 #sound-dai-cells = <0>; 1137 sound-name-prefix = "SpkrLeft"; 1138 vdd-1p8-supply = <&vreg_l15b_1p8>; 1139 vdd-io-supply = <&vreg_l3c_1p2>; 1140 1141 /* 1142 * WSA8845 Port 1 (DAC) <=> SWR0 Port 1 (SPKR_L) 1143 * WSA8845 Port 2 (COMP) <=> SWR0 Port 2 (SPKR_L_COMP) 1144 * WSA8845 Port 3 (BOOST) <=> SWR0 Port 3 (SPKR_L_BOOST) 1145 * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) 1146 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI) 1147 * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) 1148 */ 1149 qcom,port-mapping = <1 2 3 7 10 13>; 1150 }; 1151 1152 /* WSA8845, Speaker South */ 1153 south_spkr: speaker@0,1 { 1154 compatible = "sdw20217020400"; 1155 reg = <0 1>; 1156 pinctrl-0 = <&spkr_2_sd_n_active>; 1157 pinctrl-names = "default"; 1158 powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; 1159 #sound-dai-cells = <0>; 1160 sound-name-prefix = "SpkrRight"; 1161 vdd-1p8-supply = <&vreg_l15b_1p8>; 1162 vdd-io-supply = <&vreg_l3c_1p2>; 1163 1164 /* 1165 * WSA8845 Port 1 (DAC) <=> SWR0 Port 4 (SPKR_R) 1166 * WSA8845 Port 2 (COMP) <=> SWR0 Port 5 (SPKR_R_COMP) 1167 * WSA8845 Port 3 (BOOST) <=> SWR0 Port 6 (SPKR_R_BOOST) 1168 * WSA8845 Port 4 (PBR) <=> SWR0 Port 7 (PBR) 1169 * WSA8845 Port 5 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI) 1170 * WSA8845 Port 6 (CPS) <=> SWR0 Port 13 (CPS) 1171 */ 1172 qcom,port-mapping = <4 5 6 7 11 13>; 1173 }; 1174}; 1175 1176&swr1 { 1177 status = "okay"; 1178 1179 /* WCD9395 RX */ 1180 wcd_rx: codec@0,4 { 1181 compatible = "sdw20217010e00"; 1182 reg = <0 4>; 1183 1184 /* 1185 * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) 1186 * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) 1187 * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) 1188 * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) 1189 * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) 1190 * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) 1191 */ 1192 qcom,rx-port-mapping = <1 2 3 4 5 9>; 1193 }; 1194}; 1195 1196&swr2 { 1197 status = "okay"; 1198 1199 /* WCD9395 TX */ 1200 wcd_tx: codec@0,3 { 1201 compatible = "sdw20217010e00"; 1202 reg = <0 3>; 1203 1204 /* 1205 * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) 1206 * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) 1207 * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) 1208 * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) 1209 */ 1210 qcom,tx-port-mapping = <2 2 3 4>; 1211 }; 1212}; 1213 1214&tlmm { 1215 /* Reserved I/Os for NFC */ 1216 gpio-reserved-ranges = <32 8>, <74 1>; 1217 1218 bt_default: bt-default-state { 1219 bt-en-pins { 1220 pins = "gpio17"; 1221 function = "gpio"; 1222 drive-strength = <16>; 1223 bias-disable; 1224 }; 1225 1226 sw-ctrl-pins { 1227 pins = "gpio18"; 1228 function = "gpio"; 1229 bias-pull-down; 1230 }; 1231 }; 1232 1233 lt9611_irq_pin: lt9611-irq-state { 1234 pins = "gpio85"; 1235 function = "gpio"; 1236 bias-disable; 1237 }; 1238 1239 lt9611_rst_pin: lt9611-rst-state { 1240 pins = "gpio28"; 1241 function = "gpio"; 1242 output-high; 1243 }; 1244 1245 spkr_2_sd_n_active: spkr-2-sd-n-active-state { 1246 pins = "gpio77"; 1247 function = "gpio"; 1248 drive-strength = <16>; 1249 bias-disable; 1250 output-low; 1251 }; 1252 1253 wcd_default: wcd-reset-n-active-state { 1254 pins = "gpio107"; 1255 function = "gpio"; 1256 drive-strength = <16>; 1257 bias-disable; 1258 output-low; 1259 }; 1260 1261 wlan_en: wlan-en-state { 1262 pins = "gpio16"; 1263 function = "gpio"; 1264 drive-strength = <8>; 1265 bias-pull-down; 1266 }; 1267}; 1268 1269&uart14 { 1270 status = "okay"; 1271 1272 bluetooth { 1273 compatible = "qcom,wcn7850-bt"; 1274 1275 vddio-supply = <&vreg_l3c_1p2>; 1276 vddaon-supply = <&vreg_l15b_1p8>; 1277 vdddig-supply = <&vreg_s3c_0p9>; 1278 vddrfa0p8-supply = <&vreg_s3c_0p9>; 1279 vddrfa1p2-supply = <&vreg_s1c_1p2>; 1280 vddrfa1p9-supply = <&vreg_s6c_1p8>; 1281 1282 max-speed = <3200000>; 1283 1284 enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; 1285 swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; 1286 1287 pinctrl-0 = <&bt_default>; 1288 pinctrl-names = "default"; 1289 }; 1290}; 1291 1292&uart15 { 1293 status = "okay"; 1294}; 1295 1296&ufs_mem_hc { 1297 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; 1298 1299 vcc-supply = <&vreg_l17b_2p5>; 1300 vcc-max-microamp = <1300000>; 1301 vccq-supply = <&vreg_l1c_1p2>; 1302 vccq-max-microamp = <1200000>; 1303 1304 status = "okay"; 1305}; 1306 1307&ufs_mem_phy { 1308 vdda-phy-supply = <&vreg_l1d_0p88>; 1309 vdda-pll-supply = <&vreg_l3i_1p2>; 1310 1311 status = "okay"; 1312}; 1313 1314/* 1315 * DPAUX -> WCD9395 -> USB_SBU -> USB-C 1316 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C 1317 * USB SS -> USB-C 1318 */ 1319 1320&usb_1 { 1321 status = "okay"; 1322}; 1323 1324&usb_1_dwc3 { 1325 dr_mode = "otg"; 1326 usb-role-switch; 1327}; 1328 1329&usb_1_dwc3_hs { 1330 remote-endpoint = <&pmic_glink_hs_in>; 1331}; 1332 1333&usb_1_hsphy { 1334 vdd-supply = <&vreg_l1i_0p88>; 1335 vdda12-supply = <&vreg_l3i_1p2>; 1336 1337 phys = <&pm8550b_eusb2_repeater>; 1338 1339 status = "okay"; 1340}; 1341 1342&usb_dp_qmpphy { 1343 vdda-phy-supply = <&vreg_l3i_1p2>; 1344 vdda-pll-supply = <&vreg_l3g_0p91>; 1345 1346 status = "okay"; 1347}; 1348 1349&usb_dp_qmpphy_out { 1350 remote-endpoint = <&pmic_glink_ss_in>; 1351}; 1352 1353&xo_board { 1354 clock-frequency = <76800000>; 1355}; 1356