1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 9#include "sm8550.dtsi" 10#include "pm8010.dtsi" 11#include "pm8550.dtsi" 12#include "pm8550b.dtsi" 13#define PMK8550VE_SID 5 14#include "pm8550ve.dtsi" 15#include "pm8550vs.dtsi" 16#include "pmk8550.dtsi" 17#include "pmr735d_a.dtsi" 18#include "pmr735d_b.dtsi" 19 20/ { 21 model = "Qualcomm Technologies, Inc. SM8550 MTP"; 22 compatible = "qcom,sm8550-mtp", "qcom,sm8550"; 23 chassis-type = "handset"; 24 25 aliases { 26 serial0 = &uart7; 27 }; 28 29 wcd938x: audio-codec { 30 compatible = "qcom,wcd9385-codec"; 31 32 pinctrl-names = "default"; 33 pinctrl-0 = <&wcd_default>; 34 35 qcom,micbias1-microvolt = <1800000>; 36 qcom,micbias2-microvolt = <1800000>; 37 qcom,micbias3-microvolt = <1800000>; 38 qcom,micbias4-microvolt = <1800000>; 39 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 40 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 41 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 42 qcom,rx-device = <&wcd_rx>; 43 qcom,tx-device = <&wcd_tx>; 44 45 reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; 46 47 vdd-buck-supply = <&vreg_l15b_1p8>; 48 vdd-rxtx-supply = <&vreg_l15b_1p8>; 49 vdd-io-supply = <&vreg_l15b_1p8>; 50 vdd-mic-bias-supply = <&vreg_bob1>; 51 52 #sound-dai-cells = <1>; 53 }; 54 55 chosen { 56 stdout-path = "serial0:115200n8"; 57 }; 58 59 pmic-glink { 60 compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; 61 #address-cells = <1>; 62 #size-cells = <0>; 63 orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; 64 65 connector@0 { 66 compatible = "usb-c-connector"; 67 reg = <0>; 68 power-role = "dual"; 69 data-role = "dual"; 70 71 ports { 72 #address-cells = <1>; 73 #size-cells = <0>; 74 75 port@0 { 76 reg = <0>; 77 78 pmic_glink_hs_in: endpoint { 79 remote-endpoint = <&usb_1_dwc3_hs>; 80 }; 81 }; 82 83 port@1 { 84 reg = <1>; 85 86 pmic_glink_ss_in: endpoint { 87 remote-endpoint = <&usb_dp_qmpphy_out>; 88 }; 89 }; 90 91 port@2 { 92 reg = <2>; 93 94 pmic_glink_sbu: endpoint { 95 remote-endpoint = <&fsa4480_sbu_mux>; 96 }; 97 }; 98 }; 99 }; 100 }; 101 102 sound { 103 compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; 104 model = "SM8550-MTP"; 105 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", 106 "SpkrRight IN", "WSA_SPK2 OUT", 107 "IN1_HPHL", "HPHL_OUT", 108 "IN2_HPHR", "HPHR_OUT", 109 "AMIC1", "MIC BIAS1", 110 "AMIC2", "MIC BIAS2", 111 "AMIC3", "MIC BIAS3", 112 "AMIC4", "MIC BIAS3", 113 "AMIC5", "MIC BIAS4", 114 "VA DMIC0", "MIC BIAS1", 115 "VA DMIC1", "MIC BIAS1", 116 "VA DMIC2", "MIC BIAS3", 117 "TX DMIC0", "MIC BIAS1", 118 "TX DMIC1", "MIC BIAS2", 119 "TX DMIC2", "MIC BIAS3", 120 "TX SWR_INPUT0", "ADC1_OUTPUT", 121 "TX SWR_INPUT1", "ADC2_OUTPUT", 122 "TX SWR_INPUT0", "ADC3_OUTPUT", 123 "TX SWR_INPUT1", "ADC4_OUTPUT"; 124 125 wcd-playback-dai-link { 126 link-name = "WCD Playback"; 127 128 cpu { 129 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 130 }; 131 132 codec { 133 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; 134 }; 135 136 platform { 137 sound-dai = <&q6apm>; 138 }; 139 }; 140 141 wcd-capture-dai-link { 142 link-name = "WCD Capture"; 143 144 cpu { 145 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 146 }; 147 148 codec { 149 sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; 150 }; 151 152 platform { 153 sound-dai = <&q6apm>; 154 }; 155 }; 156 157 wsa-dai-link { 158 link-name = "WSA Playback"; 159 160 cpu { 161 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 162 }; 163 164 codec { 165 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; 166 }; 167 168 platform { 169 sound-dai = <&q6apm>; 170 }; 171 }; 172 173 va-dai-link { 174 link-name = "VA Capture"; 175 176 cpu { 177 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 178 }; 179 180 codec { 181 sound-dai = <&lpass_vamacro 0>; 182 }; 183 184 platform { 185 sound-dai = <&q6apm>; 186 }; 187 }; 188 }; 189 190 vph_pwr: vph-pwr-regulator { 191 compatible = "regulator-fixed"; 192 regulator-name = "vph_pwr"; 193 regulator-min-microvolt = <3700000>; 194 regulator-max-microvolt = <3700000>; 195 196 regulator-always-on; 197 regulator-boot-on; 198 }; 199}; 200 201&apps_rsc { 202 regulators-0 { 203 compatible = "qcom,pm8550-rpmh-regulators"; 204 qcom,pmic-id = "b"; 205 206 vdd-bob1-supply = <&vph_pwr>; 207 vdd-bob2-supply = <&vph_pwr>; 208 vdd-l1-l4-l10-supply = <&vreg_s6g_1p8>; 209 vdd-l2-l13-l14-supply = <&vreg_bob1>; 210 vdd-l3-supply = <&vreg_s4g_1p3>; 211 vdd-l5-l16-supply = <&vreg_bob1>; 212 vdd-l6-l7-supply = <&vreg_bob1>; 213 vdd-l8-l9-supply = <&vreg_bob1>; 214 vdd-l11-supply = <&vreg_s4g_1p3>; 215 vdd-l12-supply = <&vreg_s6g_1p8>; 216 vdd-l15-supply = <&vreg_s6g_1p8>; 217 vdd-l17-supply = <&vreg_bob2>; 218 219 vreg_bob1: bob1 { 220 regulator-name = "vreg_bob1"; 221 regulator-min-microvolt = <3296000>; 222 regulator-max-microvolt = <3960000>; 223 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 224 }; 225 226 vreg_bob2: bob2 { 227 regulator-name = "vreg_bob2"; 228 regulator-min-microvolt = <2720000>; 229 regulator-max-microvolt = <3960000>; 230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 231 }; 232 233 vreg_l1b_1p8: ldo1 { 234 regulator-name = "vreg_l1b_1p8"; 235 regulator-min-microvolt = <1800000>; 236 regulator-max-microvolt = <1800000>; 237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 238 }; 239 240 vreg_l2b_3p0: ldo2 { 241 regulator-name = "vreg_l2b_3p0"; 242 regulator-min-microvolt = <3008000>; 243 regulator-max-microvolt = <3008000>; 244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 245 }; 246 247 vreg_l5b_3p1: ldo5 { 248 regulator-name = "vreg_l5b_3p1"; 249 regulator-min-microvolt = <3104000>; 250 regulator-max-microvolt = <3104000>; 251 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 252 }; 253 254 vreg_l6b_1p8: ldo6 { 255 regulator-name = "vreg_l6b_1p8"; 256 regulator-min-microvolt = <1800000>; 257 regulator-max-microvolt = <3008000>; 258 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 259 }; 260 261 vreg_l7b_1p8: ldo7 { 262 regulator-name = "vreg_l7b_1p8"; 263 regulator-min-microvolt = <1800000>; 264 regulator-max-microvolt = <3008000>; 265 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 266 }; 267 268 vreg_l8b_1p8: ldo8 { 269 regulator-name = "vreg_l8b_1p8"; 270 regulator-min-microvolt = <1800000>; 271 regulator-max-microvolt = <3008000>; 272 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 273 }; 274 275 vreg_l9b_2p9: ldo9 { 276 regulator-name = "vreg_l9b_2p9"; 277 regulator-min-microvolt = <2960000>; 278 regulator-max-microvolt = <3008000>; 279 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 280 }; 281 282 vreg_l11b_1p2: ldo11 { 283 regulator-name = "vreg_l11b_1p2"; 284 regulator-min-microvolt = <1200000>; 285 regulator-max-microvolt = <1504000>; 286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 287 }; 288 289 vreg_l12b_1p8: ldo12 { 290 regulator-name = "vreg_l12b_1p8"; 291 regulator-min-microvolt = <1800000>; 292 regulator-max-microvolt = <1800000>; 293 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 294 }; 295 296 vreg_l13b_3p0: ldo13 { 297 regulator-name = "vreg_l13b_3p0"; 298 regulator-min-microvolt = <3000000>; 299 regulator-max-microvolt = <3000000>; 300 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 301 }; 302 303 vreg_l14b_3p2: ldo14 { 304 regulator-name = "vreg_l14b_3p2"; 305 regulator-min-microvolt = <3200000>; 306 regulator-max-microvolt = <3200000>; 307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 308 }; 309 310 vreg_l15b_1p8: ldo15 { 311 regulator-name = "vreg_l15b_1p8"; 312 regulator-min-microvolt = <1800000>; 313 regulator-max-microvolt = <1800000>; 314 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 315 }; 316 317 vreg_l16b_2p8: ldo16 { 318 regulator-name = "vreg_l16b_2p8"; 319 regulator-min-microvolt = <2800000>; 320 regulator-max-microvolt = <2800000>; 321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 322 }; 323 324 vreg_l17b_2p5: ldo17 { 325 regulator-name = "vreg_l17b_2p5"; 326 regulator-min-microvolt = <2504000>; 327 regulator-max-microvolt = <2504000>; 328 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 329 }; 330 }; 331 332 regulators-1 { 333 compatible = "qcom,pm8550vs-rpmh-regulators"; 334 qcom,pmic-id = "c"; 335 336 vdd-l3-supply = <&vreg_s4e_0p9>; 337 338 vreg_l3c_0p91: ldo3 { 339 regulator-name = "vreg_l3c_0p9"; 340 regulator-min-microvolt = <880000>; 341 regulator-max-microvolt = <912000>; 342 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 343 }; 344 }; 345 346 regulators-2 { 347 compatible = "qcom,pm8550vs-rpmh-regulators"; 348 qcom,pmic-id = "d"; 349 350 vdd-l1-supply = <&vreg_s4e_0p9>; 351 352 vreg_l1d_0p88: ldo1 { 353 regulator-name = "vreg_l1d_0p88"; 354 regulator-min-microvolt = <880000>; 355 regulator-max-microvolt = <920000>; 356 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 357 }; 358 }; 359 360 regulators-3 { 361 compatible = "qcom,pm8550vs-rpmh-regulators"; 362 qcom,pmic-id = "e"; 363 364 vdd-l1-supply = <&vreg_s4e_0p9>; 365 vdd-l2-supply = <&vreg_s4e_0p9>; 366 vdd-l3-supply = <&vreg_s4g_1p3>; 367 vdd-s4-supply = <&vph_pwr>; 368 vdd-s5-supply = <&vph_pwr>; 369 370 vreg_s4e_0p9: smps4 { 371 regulator-name = "vreg_s4e_0p9"; 372 regulator-min-microvolt = <904000>; 373 regulator-max-microvolt = <984000>; 374 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 375 }; 376 377 vreg_s5e_1p1: smps5 { 378 regulator-name = "vreg_s5e_1p1"; 379 regulator-min-microvolt = <1080000>; 380 regulator-max-microvolt = <1120000>; 381 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 382 }; 383 384 vreg_l1e_0p88: ldo1 { 385 regulator-name = "vreg_l1e_0p88"; 386 regulator-min-microvolt = <880000>; 387 regulator-max-microvolt = <880000>; 388 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 389 }; 390 391 vreg_l2e_0p9: ldo2 { 392 regulator-name = "vreg_l2e_0p9"; 393 regulator-min-microvolt = <904000>; 394 regulator-max-microvolt = <970000>; 395 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 396 }; 397 398 vreg_l3e_1p2: ldo3 { 399 regulator-name = "vreg_l3e_1p2"; 400 regulator-min-microvolt = <1200000>; 401 regulator-max-microvolt = <1200000>; 402 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 403 }; 404 }; 405 406 regulators-4 { 407 compatible = "qcom,pm8550ve-rpmh-regulators"; 408 qcom,pmic-id = "f"; 409 410 vdd-l1-supply = <&vreg_s4e_0p9>; 411 vdd-l2-supply = <&vreg_s4e_0p9>; 412 vdd-l3-supply = <&vreg_s4e_0p9>; 413 vdd-s4-supply = <&vph_pwr>; 414 415 vreg_s4f_0p5: smps4 { 416 regulator-name = "vreg_s4f_0p5"; 417 regulator-min-microvolt = <500000>; 418 regulator-max-microvolt = <700000>; 419 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 420 }; 421 422 vreg_l1f_0p9: ldo1 { 423 regulator-name = "vreg_l1f_0p9"; 424 regulator-min-microvolt = <912000>; 425 regulator-max-microvolt = <912000>; 426 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 427 }; 428 429 vreg_l2f_0p88: ldo2 { 430 regulator-name = "vreg_l2f_0p88"; 431 regulator-min-microvolt = <880000>; 432 regulator-max-microvolt = <912000>; 433 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 434 }; 435 436 vreg_l3f_0p91: ldo3 { 437 regulator-name = "vreg_l3f_0p91"; 438 regulator-min-microvolt = <880000>; 439 regulator-max-microvolt = <912000>; 440 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 441 }; 442 }; 443 444 regulators-5 { 445 compatible = "qcom,pm8550vs-rpmh-regulators"; 446 qcom,pmic-id = "g"; 447 448 vdd-l1-supply = <&vreg_s4g_1p3>; 449 vdd-l2-supply = <&vreg_s4g_1p3>; 450 vdd-l3-supply = <&vreg_s4g_1p3>; 451 vdd-s1-supply = <&vph_pwr>; 452 vdd-s2-supply = <&vph_pwr>; 453 vdd-s3-supply = <&vph_pwr>; 454 vdd-s4-supply = <&vph_pwr>; 455 vdd-s5-supply = <&vph_pwr>; 456 vdd-s6-supply = <&vph_pwr>; 457 458 vreg_s1g_1p2: smps1 { 459 regulator-name = "vreg_s1g_1p2"; 460 regulator-min-microvolt = <1200000>; 461 regulator-max-microvolt = <1300000>; 462 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 463 }; 464 465 vreg_s2g_0p8: smps2 { 466 regulator-name = "vreg_s2g_0p8"; 467 regulator-min-microvolt = <800000>; 468 regulator-max-microvolt = <1000000>; 469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 470 }; 471 472 vreg_s3g_0p7: smps3 { 473 regulator-name = "vreg_s3g_0p7"; 474 regulator-min-microvolt = <300000>; 475 regulator-max-microvolt = <1004000>; 476 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 477 }; 478 479 vreg_s4g_1p3: smps4 { 480 regulator-name = "vreg_s4g_1p3"; 481 regulator-min-microvolt = <1200000>; 482 regulator-max-microvolt = <1352000>; 483 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 484 }; 485 486 vreg_s5g_0p8: smps5 { 487 regulator-name = "vreg_s5g_0p8"; 488 regulator-min-microvolt = <500000>; 489 regulator-max-microvolt = <1004000>; 490 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 491 }; 492 493 vreg_s6g_1p8: smps6 { 494 regulator-name = "vreg_s6g_1p8"; 495 regulator-min-microvolt = <1800000>; 496 regulator-max-microvolt = <2000000>; 497 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 498 }; 499 500 vreg_l1g_1p2: ldo1 { 501 regulator-name = "vreg_l1g_1p2"; 502 regulator-min-microvolt = <1200000>; 503 regulator-max-microvolt = <1200000>; 504 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 505 }; 506 507 vreg_l2g_1p2: ldo2 { 508 regulator-name = "vreg_l2g_1p2"; 509 regulator-min-microvolt = <1200000>; 510 regulator-max-microvolt = <1200000>; 511 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 512 }; 513 514 vreg_l3g_1p2: ldo3 { 515 regulator-name = "vreg_l3g_1p2"; 516 regulator-min-microvolt = <1200000>; 517 regulator-max-microvolt = <1200000>; 518 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 519 }; 520 }; 521 522 regulators-6 { 523 compatible = "qcom,pm8010-rpmh-regulators"; 524 qcom,pmic-id = "m"; 525 526 vdd-l1-l2-supply = <&vreg_s4g_1p3>; 527 vdd-l3-l4-supply = <&vreg_bob2>; 528 vdd-l5-supply = <&vreg_s6g_1p8>; 529 vdd-l6-supply = <&vreg_s6g_1p8>; 530 vdd-l7-supply = <&vreg_bob1>; 531 532 vreg_l1m_1p056: ldo1 { 533 regulator-name = "vreg_l1m_1p056"; 534 regulator-min-microvolt = <1056000>; 535 regulator-max-microvolt = <1056000>; 536 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 537 }; 538 539 vreg_l2m_1p056: ldo2 { 540 regulator-name = "vreg_l2m_1p056"; 541 regulator-min-microvolt = <1056000>; 542 regulator-max-microvolt = <1056000>; 543 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 544 }; 545 546 vreg_l3m_2p8: ldo3 { 547 regulator-name = "vreg_l3m_2p8"; 548 regulator-min-microvolt = <2800000>; 549 regulator-max-microvolt = <2800000>; 550 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 551 }; 552 553 vreg_l4m_2p8: ldo4 { 554 regulator-name = "vreg_l4m_2p8"; 555 regulator-min-microvolt = <2800000>; 556 regulator-max-microvolt = <2800000>; 557 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 558 }; 559 560 vreg_l5m_1p8: ldo5 { 561 regulator-name = "vreg_l5m_1p8"; 562 regulator-min-microvolt = <1800000>; 563 regulator-max-microvolt = <1800000>; 564 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 565 }; 566 567 vreg_l6m_1p8: ldo6 { 568 regulator-name = "vreg_l6m_1p8"; 569 regulator-min-microvolt = <1800000>; 570 regulator-max-microvolt = <1800000>; 571 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 572 }; 573 574 vreg_l7m_2p9: ldo7 { 575 regulator-name = "vreg_l7m_2p9"; 576 regulator-min-microvolt = <2800000>; 577 regulator-max-microvolt = <2904000>; 578 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 579 }; 580 }; 581 582 regulators-7 { 583 compatible = "qcom,pm8010-rpmh-regulators"; 584 qcom,pmic-id = "n"; 585 586 vdd-l1-l2-supply = <&vreg_s4g_1p3>; 587 vdd-l3-l4-supply = <&vreg_bob2>; 588 vdd-l5-supply = <&vreg_s6g_1p8>; 589 vdd-l6-supply = <&vreg_bob1>; 590 vdd-l7-supply = <&vreg_bob1>; 591 592 vreg_l1n_1p1: ldo1 { 593 regulator-name = "vreg_l1n_1p1"; 594 regulator-min-microvolt = <1104000>; 595 regulator-max-microvolt = <1200000>; 596 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 597 }; 598 599 vreg_l2n_1p1: ldo2 { 600 regulator-name = "vreg_l2n_1p1"; 601 regulator-min-microvolt = <1104000>; 602 regulator-max-microvolt = <1200000>; 603 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 604 }; 605 606 vreg_l3n_2p8: ldo3 { 607 regulator-name = "vreg_l3n_2p8"; 608 regulator-min-microvolt = <2800000>; 609 regulator-max-microvolt = <3000000>; 610 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 611 }; 612 613 vreg_l4n_2p8: ldo4 { 614 regulator-name = "vreg_l4n_2p8"; 615 regulator-min-microvolt = <2800000>; 616 regulator-max-microvolt = <3300000>; 617 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 618 }; 619 620 vreg_l5n_1p8: ldo5 { 621 regulator-name = "vreg_l5n_1p8"; 622 regulator-min-microvolt = <1800000>; 623 regulator-max-microvolt = <1800000>; 624 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 625 }; 626 627 vreg_l6n_3p3: ldo6 { 628 regulator-name = "vreg_l6n_3p3"; 629 regulator-min-microvolt = <2800000>; 630 regulator-max-microvolt = <3304000>; 631 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 632 }; 633 634 vreg_l7n_2p96: ldo7 { 635 regulator-name = "vreg_l7n_2p96"; 636 regulator-min-microvolt = <2800000>; 637 regulator-max-microvolt = <2960000>; 638 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 639 }; 640 }; 641}; 642 643&gpu { 644 status = "okay"; 645 646 zap-shader { 647 firmware-name = "qcom/sm8550/a740_zap.mbn"; 648 }; 649}; 650 651&i2c_master_hub_0 { 652 status = "okay"; 653}; 654 655&i2c_hub_2 { 656 status = "okay"; 657 658 typec-mux@42 { 659 compatible = "fcs,fsa4480"; 660 reg = <0x42>; 661 662 vcc-supply = <&vreg_bob1>; 663 664 mode-switch; 665 orientation-switch; 666 667 port { 668 fsa4480_sbu_mux: endpoint { 669 remote-endpoint = <&pmic_glink_sbu>; 670 }; 671 }; 672 }; 673}; 674 675&lpass_tlmm { 676 spkr_1_sd_n_active: spkr-1-sd-n-active-state { 677 pins = "gpio17"; 678 function = "gpio"; 679 drive-strength = <16>; 680 bias-disable; 681 output-low; 682 }; 683 684 spkr_2_sd_n_active: spkr-2-sd-n-active-state { 685 pins = "gpio18"; 686 function = "gpio"; 687 drive-strength = <16>; 688 bias-disable; 689 output-low; 690 }; 691}; 692 693&mdss { 694 status = "okay"; 695}; 696 697&mdss_dsi0 { 698 vdda-supply = <&vreg_l3e_1p2>; 699 status = "okay"; 700 701 panel@0 { 702 compatible = "visionox,vtdr6130"; 703 reg = <0>; 704 705 pinctrl-names = "default", "sleep"; 706 pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; 707 pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; 708 709 vddio-supply = <&vreg_l12b_1p8>; 710 vci-supply = <&vreg_l13b_3p0>; 711 vdd-supply = <&vreg_l11b_1p2>; 712 713 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; 714 715 port { 716 panel0_in: endpoint { 717 remote-endpoint = <&mdss_dsi0_out>; 718 }; 719 }; 720 }; 721}; 722 723&mdss_dsi0_out { 724 remote-endpoint = <&panel0_in>; 725 data-lanes = <0 1 2 3>; 726}; 727 728&mdss_dsi0_phy { 729 vdds-supply = <&vreg_l1e_0p88>; 730 status = "okay"; 731}; 732 733&mdss_dp0 { 734 status = "okay"; 735}; 736 737&mdss_dp0_out { 738 data-lanes = <0 1>; 739 remote-endpoint = <&usb_dp_qmpphy_dp_in>; 740}; 741 742&pcie_1_phy_aux_clk { 743 clock-frequency = <1000>; 744}; 745 746&pcie0 { 747 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; 748 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; 749 750 pinctrl-names = "default"; 751 pinctrl-0 = <&pcie0_default_state>; 752 753 status = "okay"; 754}; 755 756&pcie0_phy { 757 vdda-phy-supply = <&vreg_l1e_0p88>; 758 vdda-pll-supply = <&vreg_l3e_1p2>; 759 760 status = "okay"; 761}; 762 763&pcie1 { 764 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; 765 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; 766 767 pinctrl-names = "default"; 768 pinctrl-0 = <&pcie1_default_state>; 769 770 status = "okay"; 771}; 772 773&pcie1_phy { 774 vdda-phy-supply = <&vreg_l3c_0p91>; 775 vdda-pll-supply = <&vreg_l3e_1p2>; 776 vdda-qref-supply = <&vreg_l1e_0p88>; 777 778 status = "okay"; 779}; 780 781&pm8550_gpios { 782 sdc2_card_det_n: sdc2-card-det-state { 783 pins = "gpio12"; 784 function = "normal"; 785 input-enable; 786 output-disable; 787 bias-pull-up; 788 power-source = <1>; /* 1.8 V */ 789 }; 790}; 791 792&pm8550b_eusb2_repeater { 793 vdd18-supply = <&vreg_l15b_1p8>; 794 vdd3-supply = <&vreg_l5b_3p1>; 795}; 796 797&qupv3_id_0 { 798 status = "okay"; 799}; 800 801&remoteproc_adsp { 802 firmware-name = "qcom/sm8550/adsp.mbn", 803 "qcom/sm8550/adsp_dtb.mbn"; 804 status = "okay"; 805}; 806 807&remoteproc_cdsp { 808 firmware-name = "qcom/sm8550/cdsp.mbn", 809 "qcom/sm8550/cdsp_dtb.mbn"; 810 status = "okay"; 811}; 812 813&remoteproc_mpss { 814 firmware-name = "qcom/sm8550/modem.mbn", 815 "qcom/sm8550/modem_dtb.mbn"; 816 status = "okay"; 817}; 818 819&sdhc_2 { 820 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; 821 pinctrl-names = "default", "sleep"; 822 pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; 823 pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; 824 vmmc-supply = <&vreg_l9b_2p9>; 825 vqmmc-supply = <&vreg_l8b_1p8>; 826 bus-width = <4>; 827 no-sdio; 828 no-mmc; 829 status = "okay"; 830}; 831 832&sleep_clk { 833 clock-frequency = <32000>; 834}; 835 836&swr0 { 837 status = "okay"; 838 839 /* WSA8845 */ 840 left_spkr: speaker@0,0 { 841 compatible = "sdw20217020400"; 842 reg = <0 0>; 843 pinctrl-names = "default"; 844 pinctrl-0 = <&spkr_1_sd_n_active>; 845 powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; 846 #sound-dai-cells = <0>; 847 sound-name-prefix = "SpkrLeft"; 848 vdd-1p8-supply = <&vreg_l15b_1p8>; 849 vdd-io-supply = <&vreg_l3g_1p2>; 850 }; 851 852 /* WSA8845 */ 853 right_spkr: speaker@0,1 { 854 compatible = "sdw20217020400"; 855 reg = <0 1>; 856 pinctrl-names = "default"; 857 pinctrl-0 = <&spkr_2_sd_n_active>; 858 powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; 859 #sound-dai-cells = <0>; 860 sound-name-prefix = "SpkrRight"; 861 vdd-1p8-supply = <&vreg_l15b_1p8>; 862 vdd-io-supply = <&vreg_l3g_1p2>; 863 }; 864}; 865 866&swr1 { 867 status = "okay"; 868 869 /* WCD9385 RX */ 870 wcd_rx: codec@0,4 { 871 compatible = "sdw20217010d00"; 872 reg = <0 4>; 873 qcom,rx-port-mapping = <1 2 3 4 5>; 874 }; 875}; 876 877&swr2 { 878 status = "okay"; 879 880 /* WCD9385 TX */ 881 wcd_tx: codec@0,3 { 882 compatible = "sdw20217010d00"; 883 reg = <0 3>; 884 qcom,tx-port-mapping = <2 2 3 4>; 885 }; 886}; 887 888&tlmm { 889 gpio-reserved-ranges = <32 8>; 890 891 sde_dsi_active: sde-dsi-active-state { 892 pins = "gpio133"; 893 function = "gpio"; 894 drive-strength = <8>; 895 bias-disable; 896 }; 897 898 sde_dsi_suspend: sde-dsi-suspend-state { 899 pins = "gpio133"; 900 function = "gpio"; 901 drive-strength = <2>; 902 bias-pull-down; 903 }; 904 905 sde_te_active: sde-te-active-state { 906 pins = "gpio86"; 907 function = "mdp_vsync"; 908 drive-strength = <2>; 909 bias-pull-down; 910 }; 911 912 sde_te_suspend: sde-te-suspend-state { 913 pins = "gpio86"; 914 function = "mdp_vsync"; 915 drive-strength = <2>; 916 bias-pull-down; 917 }; 918 919 wcd_default: wcd-reset-n-active-state { 920 pins = "gpio108"; 921 function = "gpio"; 922 drive-strength = <16>; 923 bias-disable; 924 output-low; 925 }; 926}; 927 928&uart7 { 929 status = "okay"; 930}; 931 932&ufs_mem_hc { 933 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; 934 vcc-supply = <&vreg_l17b_2p5>; 935 vcc-max-microamp = <1300000>; 936 vccq-supply = <&vreg_l1g_1p2>; 937 vccq-max-microamp = <1200000>; 938 vdd-hba-supply = <&vreg_l3g_1p2>; 939 940 status = "okay"; 941}; 942 943&ufs_mem_phy { 944 vdda-phy-supply = <&vreg_l1d_0p88>; 945 vdda-pll-supply = <&vreg_l3e_1p2>; 946 947 status = "okay"; 948}; 949 950&usb_1 { 951 status = "okay"; 952}; 953 954&usb_1_dwc3 { 955 dr_mode = "otg"; 956 usb-role-switch; 957}; 958 959&usb_1_dwc3_hs { 960 remote-endpoint = <&pmic_glink_hs_in>; 961}; 962 963&usb_1_dwc3_ss { 964 remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; 965}; 966 967&usb_1_hsphy { 968 vdd-supply = <&vreg_l1e_0p88>; 969 vdda12-supply = <&vreg_l3e_1p2>; 970 971 phys = <&pm8550b_eusb2_repeater>; 972 973 status = "okay"; 974}; 975 976&usb_dp_qmpphy { 977 vdda-phy-supply = <&vreg_l3e_1p2>; 978 vdda-pll-supply = <&vreg_l3f_0p91>; 979 980 orientation-switch; 981 982 status = "okay"; 983}; 984 985&usb_dp_qmpphy_dp_in { 986 remote-endpoint = <&mdss_dp0_out>; 987}; 988 989&usb_dp_qmpphy_out { 990 remote-endpoint = <&pmic_glink_ss_in>; 991}; 992 993&usb_dp_qmpphy_usb_ss_in { 994 remote-endpoint = <&usb_1_dwc3_ss>; 995}; 996 997&xo_board { 998 clock-frequency = <76800000>; 999}; 1000