1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2024 Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/leds/common.h> 9#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 10#include "sm8550.dtsi" 11#include "pm8010.dtsi" 12#include "pm8550.dtsi" 13#include "pm8550b.dtsi" 14#define PMK8550VE_SID 5 15#include "pm8550ve.dtsi" 16#include "pm8550vs.dtsi" 17#include "pmk8550.dtsi" 18#include "pmr735d_a.dtsi" 19 20/ { 21 model = "Qualcomm Technologies, Inc. SM8550 HDK"; 22 compatible = "qcom,sm8550-hdk", "qcom,sm8550"; 23 chassis-type = "embedded"; 24 25 aliases { 26 serial0 = &uart7; 27 serial1 = &uart14; 28 }; 29 30 wcd938x: audio-codec { 31 compatible = "qcom,wcd9385-codec"; 32 33 pinctrl-names = "default"; 34 pinctrl-0 = <&wcd_default>; 35 36 qcom,micbias1-microvolt = <1800000>; 37 qcom,micbias2-microvolt = <1800000>; 38 qcom,micbias3-microvolt = <1800000>; 39 qcom,micbias4-microvolt = <1800000>; 40 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 41 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 42 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 43 qcom,rx-device = <&wcd_rx>; 44 qcom,tx-device = <&wcd_tx>; 45 46 reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; 47 48 vdd-buck-supply = <&vreg_l15b_1p8>; 49 vdd-rxtx-supply = <&vreg_l15b_1p8>; 50 vdd-io-supply = <&vreg_l15b_1p8>; 51 vdd-mic-bias-supply = <&vreg_bob1>; 52 53 #sound-dai-cells = <1>; 54 }; 55 56 chosen { 57 stdout-path = "serial0:115200n8"; 58 }; 59 60 hdmi-out { 61 compatible = "hdmi-connector"; 62 type = "a"; 63 64 port { 65 hdmi_connector_out: endpoint { 66 remote-endpoint = <<9611_out>; 67 }; 68 }; 69 }; 70 71 gpio-keys { 72 compatible = "gpio-keys"; 73 74 pinctrl-0 = <&volume_up_n>; 75 pinctrl-names = "default"; 76 77 key-volume-up { 78 label = "Volume Up"; 79 linux,code = <KEY_VOLUMEUP>; 80 gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; 81 debounce-interval = <15>; 82 linux,can-disable; 83 wakeup-source; 84 }; 85 }; 86 87 leds { 88 compatible = "gpio-leds"; 89 90 led-0 { 91 function = LED_FUNCTION_BLUETOOTH; 92 color = <LED_COLOR_ID_BLUE>; 93 gpios = <&tlmm 159 GPIO_ACTIVE_HIGH>; 94 linux,default-trigger = "bluetooth-power"; 95 default-state = "off"; 96 }; 97 98 led-1 { 99 function = LED_FUNCTION_INDICATOR; 100 color = <LED_COLOR_ID_GREEN>; 101 gpios = <&tlmm 160 GPIO_ACTIVE_HIGH>; 102 default-state = "off"; 103 panic-indicator; 104 }; 105 106 led-2 { 107 function = LED_FUNCTION_WLAN; 108 color = <LED_COLOR_ID_ORANGE>; 109 gpios = <&tlmm 162 GPIO_ACTIVE_HIGH>; 110 linux,default-trigger = "phy0tx"; 111 default-state = "off"; 112 }; 113 }; 114 115 pmic-glink { 116 compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; 117 #address-cells = <1>; 118 #size-cells = <0>; 119 orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; 120 121 connector@0 { 122 compatible = "usb-c-connector"; 123 reg = <0>; 124 power-role = "dual"; 125 data-role = "dual"; 126 127 ports { 128 #address-cells = <1>; 129 #size-cells = <0>; 130 131 port@0 { 132 reg = <0>; 133 134 pmic_glink_hs_in: endpoint { 135 remote-endpoint = <&usb_1_dwc3_hs>; 136 }; 137 }; 138 139 port@1 { 140 reg = <1>; 141 142 pmic_glink_ss_in: endpoint { 143 remote-endpoint = <&usb_dp_qmpphy_out>; 144 }; 145 }; 146 147 port@2 { 148 reg = <2>; 149 150 pmic_glink_sbu: endpoint { 151 remote-endpoint = <&fsa4480_sbu_mux>; 152 }; 153 }; 154 }; 155 }; 156 }; 157 158 lt9611_1v2: regulator-lt9611-1v2 { 159 compatible = "regulator-fixed"; 160 161 regulator-name = "LT9611_1V2"; 162 regulator-min-microvolt = <1200000>; 163 regulator-max-microvolt = <1200000>; 164 165 vin-supply = <&vph_pwr>; 166 gpio = <&tlmm 152 GPIO_ACTIVE_HIGH>; 167 168 enable-active-high; 169 }; 170 171 lt9611_3v3: regulator-lt9611-3v3 { 172 compatible = "regulator-fixed"; 173 174 regulator-name = "LT9611_3V3"; 175 regulator-min-microvolt = <3300000>; 176 regulator-max-microvolt = <3300000>; 177 178 vin-supply = <&vreg_bob_3v3>; 179 gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>; 180 181 enable-active-high; 182 }; 183 184 vph_pwr: regulator-vph-pwr { 185 compatible = "regulator-fixed"; 186 187 regulator-name = "vph_pwr"; 188 regulator-min-microvolt = <3700000>; 189 regulator-max-microvolt = <3700000>; 190 regulator-always-on; 191 regulator-boot-on; 192 }; 193 194 vreg_bob_3v3: regulator-vreg-bob-3v3 { 195 compatible = "regulator-fixed"; 196 197 regulator-name = "VREG_BOB_3P3"; 198 regulator-min-microvolt = <3300000>; 199 regulator-max-microvolt = <3300000>; 200 201 vin-supply = <&vph_pwr>; 202 }; 203 204 sound { 205 compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; 206 model = "SM8550-HDK"; 207 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", 208 "SpkrRight IN", "WSA_SPK2 OUT", 209 "IN1_HPHL", "HPHL_OUT", 210 "IN2_HPHR", "HPHR_OUT", 211 "AMIC1", "MIC BIAS1", 212 "AMIC2", "MIC BIAS2", 213 "AMIC5", "MIC BIAS4", 214 "TX SWR_INPUT0", "ADC1_OUTPUT", 215 "TX SWR_INPUT1", "ADC2_OUTPUT", 216 "TX SWR_INPUT1", "ADC4_OUTPUT"; 217 218 wcd-playback-dai-link { 219 link-name = "WCD Playback"; 220 221 cpu { 222 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 223 }; 224 225 codec { 226 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; 227 }; 228 229 platform { 230 sound-dai = <&q6apm>; 231 }; 232 }; 233 234 wcd-capture-dai-link { 235 link-name = "WCD Capture"; 236 237 cpu { 238 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 239 }; 240 241 codec { 242 sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; 243 }; 244 245 platform { 246 sound-dai = <&q6apm>; 247 }; 248 }; 249 250 wsa-dai-link { 251 link-name = "WSA Playback"; 252 253 cpu { 254 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 255 }; 256 257 codec { 258 sound-dai = <&north_spkr>, <&south_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; 259 }; 260 261 platform { 262 sound-dai = <&q6apm>; 263 }; 264 }; 265 266 va-dai-link { 267 link-name = "VA Capture"; 268 269 cpu { 270 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 271 }; 272 273 codec { 274 sound-dai = <&lpass_vamacro 0>; 275 }; 276 277 platform { 278 sound-dai = <&q6apm>; 279 }; 280 }; 281 }; 282}; 283 284&apps_rsc { 285 regulators-0 { 286 compatible = "qcom,pm8550-rpmh-regulators"; 287 288 vdd-bob1-supply = <&vph_pwr>; 289 vdd-bob2-supply = <&vph_pwr>; 290 vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>; 291 vdd-l2-l13-l14-supply = <&vreg_bob1>; 292 vdd-l3-supply = <&vreg_s4g_1p25>; 293 vdd-l5-l16-supply = <&vreg_bob1>; 294 vdd-l6-l7-supply = <&vreg_bob1>; 295 vdd-l8-l9-supply = <&vreg_bob1>; 296 vdd-l11-supply = <&vreg_s4g_1p25>; 297 vdd-l12-supply = <&vreg_s6g_1p86>; 298 vdd-l15-supply = <&vreg_s6g_1p86>; 299 vdd-l17-supply = <&vreg_bob2>; 300 301 qcom,pmic-id = "b"; 302 303 vreg_bob1: bob1 { 304 regulator-name = "vreg_bob1"; 305 regulator-min-microvolt = <3296000>; 306 regulator-max-microvolt = <3960000>; 307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 308 }; 309 310 vreg_bob2: bob2 { 311 regulator-name = "vreg_bob2"; 312 regulator-min-microvolt = <2720000>; 313 regulator-max-microvolt = <3960000>; 314 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 315 }; 316 317 vreg_l1b_1p8: ldo1 { 318 regulator-name = "vreg_l1b_1p8"; 319 regulator-min-microvolt = <1800000>; 320 regulator-max-microvolt = <1800000>; 321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 322 regulator-allow-set-load; 323 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 324 RPMH_REGULATOR_MODE_HPM>; 325 }; 326 327 vreg_l2b_3p0: ldo2 { 328 regulator-name = "vreg_l2b_3p0"; 329 regulator-min-microvolt = <3008000>; 330 regulator-max-microvolt = <3008000>; 331 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 332 regulator-allow-set-load; 333 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 334 RPMH_REGULATOR_MODE_HPM>; 335 }; 336 337 vreg_l5b_3p1: ldo5 { 338 regulator-name = "vreg_l5b_3p1"; 339 regulator-min-microvolt = <3104000>; 340 regulator-max-microvolt = <3104000>; 341 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 342 regulator-allow-set-load; 343 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 344 RPMH_REGULATOR_MODE_HPM>; 345 }; 346 347 vreg_l6b_1p8: ldo6 { 348 regulator-name = "vreg_l6b_1p8"; 349 regulator-min-microvolt = <1800000>; 350 regulator-max-microvolt = <3008000>; 351 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 352 regulator-allow-set-load; 353 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 354 RPMH_REGULATOR_MODE_HPM>; 355 }; 356 357 vreg_l7b_1p8: ldo7 { 358 regulator-name = "vreg_l7b_1p8"; 359 regulator-min-microvolt = <1800000>; 360 regulator-max-microvolt = <3008000>; 361 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 362 regulator-allow-set-load; 363 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 364 RPMH_REGULATOR_MODE_HPM>; 365 }; 366 367 vreg_l8b_1p8: ldo8 { 368 regulator-name = "vreg_l8b_1p8"; 369 regulator-min-microvolt = <1800000>; 370 regulator-max-microvolt = <3008000>; 371 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 372 regulator-allow-set-load; 373 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 374 RPMH_REGULATOR_MODE_HPM>; 375 }; 376 377 vreg_l9b_2p9: ldo9 { 378 regulator-name = "vreg_l9b_2p9"; 379 regulator-min-microvolt = <2960000>; 380 regulator-max-microvolt = <3008000>; 381 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 382 regulator-allow-set-load; 383 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 384 RPMH_REGULATOR_MODE_HPM>; 385 }; 386 387 vreg_l11b_1p2: ldo11 { 388 regulator-name = "vreg_l11b_1p2"; 389 regulator-min-microvolt = <1200000>; 390 regulator-max-microvolt = <1504000>; 391 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 392 regulator-allow-set-load; 393 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 394 RPMH_REGULATOR_MODE_HPM>; 395 }; 396 397 vreg_l12b_1p8: ldo12 { 398 regulator-name = "vreg_l12b_1p8"; 399 regulator-min-microvolt = <1800000>; 400 regulator-max-microvolt = <1800000>; 401 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 402 regulator-allow-set-load; 403 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 404 RPMH_REGULATOR_MODE_HPM>; 405 }; 406 407 vreg_l13b_3p0: ldo13 { 408 regulator-name = "vreg_l13b_3p0"; 409 regulator-min-microvolt = <3000000>; 410 regulator-max-microvolt = <3000000>; 411 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 412 regulator-allow-set-load; 413 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 414 RPMH_REGULATOR_MODE_HPM>; 415 }; 416 417 vreg_l14b_3p2: ldo14 { 418 regulator-name = "vreg_l14b_3p2"; 419 regulator-min-microvolt = <3200000>; 420 regulator-max-microvolt = <3200000>; 421 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 422 regulator-allow-set-load; 423 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 424 RPMH_REGULATOR_MODE_HPM>; 425 }; 426 427 vreg_l15b_1p8: ldo15 { 428 regulator-name = "vreg_l15b_1p8"; 429 regulator-min-microvolt = <1800000>; 430 regulator-max-microvolt = <1800000>; 431 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 432 regulator-allow-set-load; 433 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 434 RPMH_REGULATOR_MODE_HPM>; 435 }; 436 437 vreg_l16b_2p8: ldo16 { 438 regulator-name = "vreg_l16b_2p8"; 439 regulator-min-microvolt = <2800000>; 440 regulator-max-microvolt = <2800000>; 441 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 442 regulator-allow-set-load; 443 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 444 RPMH_REGULATOR_MODE_HPM>; 445 }; 446 447 vreg_l17b_2p5: ldo17 { 448 regulator-name = "vreg_l17b_2p5"; 449 regulator-min-microvolt = <2504000>; 450 regulator-max-microvolt = <2504000>; 451 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 452 regulator-allow-set-load; 453 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 454 RPMH_REGULATOR_MODE_HPM>; 455 }; 456 }; 457 458 regulators-1 { 459 compatible = "qcom,pm8550vs-rpmh-regulators"; 460 461 vdd-l1-supply = <&vreg_s4g_1p25>; 462 vdd-l2-supply = <&vreg_s4e_0p95>; 463 vdd-l3-supply = <&vreg_s4e_0p95>; 464 465 qcom,pmic-id = "c"; 466 467 vreg_l3c_0p9: ldo3 { 468 regulator-name = "vreg_l3c_0p9"; 469 regulator-min-microvolt = <880000>; 470 regulator-max-microvolt = <912000>; 471 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 472 regulator-allow-set-load; 473 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 474 RPMH_REGULATOR_MODE_HPM>; 475 }; 476 }; 477 478 regulators-2 { 479 compatible = "qcom,pm8550vs-rpmh-regulators"; 480 481 vdd-l1-supply = <&vreg_s4e_0p95>; 482 vdd-l2-supply = <&vreg_s4e_0p95>; 483 vdd-l3-supply = <&vreg_s4e_0p95>; 484 485 qcom,pmic-id = "d"; 486 487 vreg_l1d_0p88: ldo1 { 488 regulator-name = "vreg_l1d_0p88"; 489 regulator-min-microvolt = <880000>; 490 regulator-max-microvolt = <920000>; 491 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 492 regulator-allow-set-load; 493 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 494 RPMH_REGULATOR_MODE_HPM>; 495 }; 496 497 /* ldo2 supplies SM8550 VDD_LPI_MX */ 498 }; 499 500 regulators-3 { 501 compatible = "qcom,pm8550vs-rpmh-regulators"; 502 503 vdd-l1-supply = <&vreg_s4e_0p95>; 504 vdd-l2-supply = <&vreg_s4e_0p95>; 505 vdd-l3-supply = <&vreg_s4g_1p25>; 506 vdd-s4-supply = <&vph_pwr>; 507 vdd-s5-supply = <&vph_pwr>; 508 509 qcom,pmic-id = "e"; 510 511 vreg_s4e_0p95: smps4 { 512 regulator-name = "vreg_s4e_0p95"; 513 regulator-min-microvolt = <904000>; 514 regulator-max-microvolt = <984000>; 515 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 516 }; 517 518 vreg_s5e_1p08: smps5 { 519 regulator-name = "vreg_s5e_1p08"; 520 regulator-min-microvolt = <1080000>; 521 regulator-max-microvolt = <1120000>; 522 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 523 }; 524 525 vreg_l1e_0p88: ldo1 { 526 regulator-name = "vreg_l1e_0p88"; 527 regulator-min-microvolt = <880000>; 528 regulator-max-microvolt = <880000>; 529 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 530 regulator-allow-set-load; 531 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 532 RPMH_REGULATOR_MODE_HPM>; 533 }; 534 535 vreg_l2e_0p9: ldo2 { 536 regulator-name = "vreg_l2e_0p9"; 537 regulator-min-microvolt = <904000>; 538 regulator-max-microvolt = <970000>; 539 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 540 regulator-allow-set-load; 541 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 542 RPMH_REGULATOR_MODE_HPM>; 543 }; 544 545 vreg_l3e_1p2: ldo3 { 546 regulator-name = "vreg_l3e_1p2"; 547 regulator-min-microvolt = <1200000>; 548 regulator-max-microvolt = <1200000>; 549 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 550 regulator-allow-set-load; 551 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 552 RPMH_REGULATOR_MODE_HPM>; 553 }; 554 }; 555 556 regulators-4 { 557 compatible = "qcom,pm8550ve-rpmh-regulators"; 558 559 vdd-l1-supply = <&vreg_s4e_0p95>; 560 vdd-l2-supply = <&vreg_s4e_0p95>; 561 vdd-l3-supply = <&vreg_s4e_0p95>; 562 vdd-s4-supply = <&vph_pwr>; 563 564 qcom,pmic-id = "f"; 565 566 vreg_s4f_0p5: smps4 { 567 regulator-name = "vreg_s4f_0p5"; 568 regulator-min-microvolt = <500000>; 569 regulator-max-microvolt = <700000>; 570 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 571 }; 572 573 vreg_l1f_0p9: ldo1 { 574 regulator-name = "vreg_l1f_0p9"; 575 regulator-min-microvolt = <912000>; 576 regulator-max-microvolt = <912000>; 577 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 578 regulator-allow-set-load; 579 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 580 RPMH_REGULATOR_MODE_HPM>; 581 }; 582 583 vreg_l2f_0p88: ldo2 { 584 regulator-name = "vreg_l2f_0p88"; 585 regulator-min-microvolt = <880000>; 586 regulator-max-microvolt = <912000>; 587 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 588 regulator-allow-set-load; 589 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 590 RPMH_REGULATOR_MODE_HPM>; 591 }; 592 593 vreg_l3f_0p88: ldo3 { 594 regulator-name = "vreg_l3f_0p88"; 595 regulator-min-microvolt = <880000>; 596 regulator-max-microvolt = <912000>; 597 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 598 regulator-allow-set-load; 599 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 600 RPMH_REGULATOR_MODE_HPM>; 601 }; 602 }; 603 604 regulators-5 { 605 compatible = "qcom,pm8550vs-rpmh-regulators"; 606 607 vdd-l1-supply = <&vreg_s4g_1p25>; 608 vdd-l2-supply = <&vreg_s4g_1p25>; 609 vdd-l3-supply = <&vreg_s4g_1p25>; 610 vdd-s1-supply = <&vph_pwr>; 611 vdd-s2-supply = <&vph_pwr>; 612 vdd-s3-supply = <&vph_pwr>; 613 vdd-s4-supply = <&vph_pwr>; 614 vdd-s5-supply = <&vph_pwr>; 615 vdd-s6-supply = <&vph_pwr>; 616 617 qcom,pmic-id = "g"; 618 619 vreg_s1g_1p25: smps1 { 620 regulator-name = "vreg_s1g_1p25"; 621 regulator-min-microvolt = <1200000>; 622 regulator-max-microvolt = <1300000>; 623 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 624 }; 625 626 vreg_s2g_0p85: smps2 { 627 regulator-name = "vreg_s2g_0p85"; 628 regulator-min-microvolt = <800000>; 629 regulator-max-microvolt = <1000000>; 630 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 631 }; 632 633 vreg_s3g_0p8: smps3 { 634 regulator-name = "vreg_s3g_0p8"; 635 regulator-min-microvolt = <300000>; 636 regulator-max-microvolt = <1004000>; 637 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 638 }; 639 640 vreg_s4g_1p25: smps4 { 641 regulator-name = "vreg_s4g_1p25"; 642 regulator-min-microvolt = <1200000>; 643 regulator-max-microvolt = <1352000>; 644 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 645 }; 646 647 vreg_s5g_0p85: smps5 { 648 regulator-name = "vreg_s5g_0p85"; 649 regulator-min-microvolt = <500000>; 650 regulator-max-microvolt = <1004000>; 651 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 652 }; 653 654 vreg_s6g_1p86: smps6 { 655 regulator-name = "vreg_s6g_1p86"; 656 regulator-min-microvolt = <1800000>; 657 regulator-max-microvolt = <2000000>; 658 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 659 }; 660 661 vreg_l1g_1p2: ldo1 { 662 regulator-name = "vreg_l1g_1p2"; 663 regulator-min-microvolt = <1200000>; 664 regulator-max-microvolt = <1200000>; 665 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 666 regulator-allow-set-load; 667 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 668 RPMH_REGULATOR_MODE_HPM>; 669 }; 670 671 vreg_l3g_1p2: ldo3 { 672 regulator-name = "vreg_l3g_1p2"; 673 regulator-min-microvolt = <1200000>; 674 regulator-max-microvolt = <1200000>; 675 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 676 regulator-allow-set-load; 677 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 678 RPMH_REGULATOR_MODE_HPM>; 679 }; 680 }; 681 682 regulators-6 { 683 compatible = "qcom,pm8010-rpmh-regulators"; 684 685 vdd-l1-l2-supply = <&vreg_s4g_1p25>; 686 vdd-l3-l4-supply = <&vreg_bob2>; 687 vdd-l5-supply = <&vreg_s6g_1p86>; 688 vdd-l6-supply = <&vreg_s6g_1p86>; 689 vdd-l7-supply = <&vreg_bob1>; 690 691 qcom,pmic-id = "m"; 692 693 vreg_l1m_1p056: ldo1 { 694 regulator-name = "vreg_l1m_1p056"; 695 regulator-min-microvolt = <1056000>; 696 regulator-max-microvolt = <1056000>; 697 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 698 regulator-allow-set-load; 699 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 700 RPMH_REGULATOR_MODE_HPM>; 701 }; 702 703 vreg_l2m_1p056: ldo2 { 704 regulator-name = "vreg_l2m_1p056"; 705 regulator-min-microvolt = <1056000>; 706 regulator-max-microvolt = <1056000>; 707 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 708 regulator-allow-set-load; 709 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 710 RPMH_REGULATOR_MODE_HPM>; 711 }; 712 713 vreg_l3m_2p8: ldo3 { 714 regulator-name = "vreg_l3m_2p8"; 715 regulator-min-microvolt = <2800000>; 716 regulator-max-microvolt = <2800000>; 717 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 718 }; 719 720 vreg_l4m_2p8: ldo4 { 721 regulator-name = "vreg_l4m_2p8"; 722 regulator-min-microvolt = <2800000>; 723 regulator-max-microvolt = <2800000>; 724 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 725 }; 726 727 vreg_l5m_1p8: ldo5 { 728 regulator-name = "vreg_l5m_1p8"; 729 regulator-min-microvolt = <1800000>; 730 regulator-max-microvolt = <1800000>; 731 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 732 }; 733 734 vreg_l6m_1p8: ldo6 { 735 regulator-name = "vreg_l6m_1p8"; 736 regulator-min-microvolt = <1800000>; 737 regulator-max-microvolt = <1800000>; 738 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 739 }; 740 741 vreg_l7m_2p9: ldo7 { 742 regulator-name = "vreg_l7m_2p9"; 743 regulator-min-microvolt = <2800000>; 744 regulator-max-microvolt = <2904000>; 745 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 746 }; 747 }; 748 749 regulators-7 { 750 compatible = "qcom,pm8010-rpmh-regulators"; 751 752 vdd-l1-l2-supply = <&vreg_s4g_1p25>; 753 vdd-l3-l4-supply = <&vreg_bob2>; 754 vdd-l5-supply = <&vreg_s6g_1p86>; 755 vdd-l6-supply = <&vreg_bob1>; 756 vdd-l7-supply = <&vreg_bob1>; 757 758 qcom,pmic-id = "n"; 759 760 vreg_l1n_1p1: ldo1 { 761 regulator-name = "vreg_l1n_1p1"; 762 regulator-min-microvolt = <1104000>; 763 regulator-max-microvolt = <1200000>; 764 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 765 regulator-allow-set-load; 766 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 767 RPMH_REGULATOR_MODE_HPM>; 768 }; 769 770 vreg_l2n_1p1: ldo2 { 771 regulator-name = "vreg_l2n_1p1"; 772 regulator-min-microvolt = <1104000>; 773 regulator-max-microvolt = <1200000>; 774 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 775 regulator-allow-set-load; 776 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 777 RPMH_REGULATOR_MODE_HPM>; 778 }; 779 780 vreg_l3n_2p8: ldo3 { 781 regulator-name = "vreg_l3n_2p8"; 782 regulator-min-microvolt = <2800000>; 783 regulator-max-microvolt = <3000000>; 784 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 785 }; 786 787 vreg_l4n_2p8: ldo4 { 788 regulator-name = "vreg_l4n_2p8"; 789 regulator-min-microvolt = <2800000>; 790 regulator-max-microvolt = <3300000>; 791 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 792 }; 793 794 vreg_l5n_1p8: ldo5 { 795 regulator-name = "vreg_l5n_1p8"; 796 regulator-min-microvolt = <1800000>; 797 regulator-max-microvolt = <1800000>; 798 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 799 }; 800 801 vreg_l6n_3p3: ldo6 { 802 regulator-name = "vreg_l6n_3p3"; 803 regulator-min-microvolt = <2800000>; 804 regulator-max-microvolt = <3304000>; 805 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 806 }; 807 808 vreg_l7n_2p96: ldo7 { 809 regulator-name = "vreg_l7n_2p96"; 810 regulator-min-microvolt = <2800000>; 811 regulator-max-microvolt = <2960000>; 812 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 813 }; 814 }; 815}; 816 817&i2c0 { 818 clock-frequency = <400000>; 819 status = "okay"; 820 821 lt9611_codec: hdmi-bridge@2b { 822 compatible = "lontium,lt9611uxc"; 823 reg = <0x2b>; 824 825 interrupts-extended = <&tlmm 8 IRQ_TYPE_EDGE_FALLING>; 826 827 reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; 828 829 vdd-supply = <<9611_1v2>; 830 vcc-supply = <<9611_3v3>; 831 832 pinctrl-0 = <<9611_irq_pin>, <<9611_rst_pin>; 833 pinctrl-names = "default"; 834 835 ports { 836 #address-cells = <1>; 837 #size-cells = <0>; 838 839 port@0 { 840 reg = <0>; 841 842 lt9611_a: endpoint { 843 remote-endpoint = <&mdss_dsi0_out>; 844 }; 845 }; 846 847 port@2 { 848 reg = <2>; 849 850 lt9611_out: endpoint { 851 remote-endpoint = <&hdmi_connector_out>; 852 }; 853 }; 854 }; 855 }; 856}; 857 858&i2c_hub_2 { 859 status = "okay"; 860 861 typec-mux@42 { 862 compatible = "fcs,fsa4480"; 863 reg = <0x42>; 864 865 vcc-supply = <&vreg_bob1>; 866 867 mode-switch; 868 orientation-switch; 869 870 port { 871 fsa4480_sbu_mux: endpoint { 872 remote-endpoint = <&pmic_glink_sbu>; 873 }; 874 }; 875 }; 876}; 877 878&i2c_master_hub_0 { 879 status = "okay"; 880}; 881 882&ipa { 883 qcom,gsi-loader = "self"; 884 memory-region = <&ipa_fw_mem>; 885 firmware-name = "qcom/sm8550/ipa_fws.mbn"; 886 status = "okay"; 887}; 888 889&gpi_dma1 { 890 status = "okay"; 891}; 892 893&gpu { 894 status = "okay"; 895 896 zap-shader { 897 firmware-name = "qcom/sm8550/a740_zap.mbn"; 898 }; 899}; 900 901&lpass_tlmm { 902 spkr_1_sd_n_active: spkr-1-sd-n-active-state { 903 pins = "gpio17"; 904 function = "gpio"; 905 drive-strength = <16>; 906 bias-disable; 907 output-low; 908 }; 909 910 spkr_2_sd_n_active: spkr-2-sd-n-active-state { 911 pins = "gpio18"; 912 function = "gpio"; 913 drive-strength = <16>; 914 bias-disable; 915 output-low; 916 }; 917}; 918 919&mdss { 920 status = "okay"; 921}; 922 923&mdss_dsi0 { 924 vdda-supply = <&vreg_l3e_1p2>; 925 status = "okay"; 926}; 927 928&mdss_dsi0_out { 929 remote-endpoint = <<9611_a>; 930 data-lanes = <0 1 2 3>; 931}; 932 933&mdss_dsi0_phy { 934 vdds-supply = <&vreg_l1e_0p88>; 935 status = "okay"; 936}; 937 938&mdss_dp0 { 939 status = "okay"; 940}; 941 942&mdss_dp0_out { 943 remote-endpoint = <&usb_dp_qmpphy_dp_in>; 944 data-lanes = <0 1>; 945}; 946 947&pcie0 { 948 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; 949 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; 950 951 pinctrl-0 = <&pcie0_default_state>; 952 pinctrl-names = "default"; 953 954 status = "okay"; 955}; 956 957&pcie0_phy { 958 vdda-phy-supply = <&vreg_l1e_0p88>; 959 vdda-pll-supply = <&vreg_l3e_1p2>; 960 961 status = "okay"; 962}; 963 964&pcie1 { 965 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; 966 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; 967 968 pinctrl-0 = <&pcie1_default_state>; 969 pinctrl-names = "default"; 970 971 status = "okay"; 972}; 973 974&pcie1_phy { 975 vdda-phy-supply = <&vreg_l3c_0p9>; 976 vdda-pll-supply = <&vreg_l3e_1p2>; 977 vdda-qref-supply = <&vreg_l1e_0p88>; 978 979 status = "okay"; 980}; 981 982&pcie_1_phy_aux_clk { 983 clock-frequency = <1000>; 984}; 985 986&pm8550_gpios { 987 sdc2_card_det_n: sdc2-card-det-state { 988 pins = "gpio12"; 989 function = "normal"; 990 input-enable; 991 output-disable; 992 bias-pull-up; 993 power-source = <1>; /* 1.8 V */ 994 }; 995 996 volume_up_n: volume-up-n-state { 997 pins = "gpio6"; 998 function = "normal"; 999 power-source = <1>; 1000 bias-pull-up; 1001 input-enable; 1002 }; 1003}; 1004 1005/* The RGB signals are routed to 3 separate LEDs on the HDK8550 */ 1006&pm8550_pwm { 1007 #address-cells = <1>; 1008 #size-cells = <0>; 1009 1010 status = "okay"; 1011 1012 led@1 { 1013 reg = <1>; 1014 function = LED_FUNCTION_STATUS; 1015 color = <LED_COLOR_ID_RED>; 1016 default-state = "off"; 1017 }; 1018 1019 led@2 { 1020 reg = <2>; 1021 function = LED_FUNCTION_STATUS; 1022 color = <LED_COLOR_ID_GREEN>; 1023 default-state = "off"; 1024 }; 1025 1026 led@3 { 1027 reg = <3>; 1028 function = LED_FUNCTION_STATUS; 1029 color = <LED_COLOR_ID_BLUE>; 1030 default-state = "off"; 1031 }; 1032}; 1033 1034&pm8550b_eusb2_repeater { 1035 vdd18-supply = <&vreg_l15b_1p8>; 1036 vdd3-supply = <&vreg_l5b_3p1>; 1037}; 1038 1039&pon_pwrkey { 1040 status = "okay"; 1041}; 1042 1043&pon_resin { 1044 linux,code = <KEY_VOLUMEDOWN>; 1045 1046 status = "okay"; 1047}; 1048 1049&qupv3_id_0 { 1050 status = "okay"; 1051}; 1052 1053&qupv3_id_1 { 1054 status = "okay"; 1055}; 1056 1057&remoteproc_adsp { 1058 firmware-name = "qcom/sm8550/adsp.mbn", 1059 "qcom/sm8550/adsp_dtb.mbn"; 1060 status = "okay"; 1061}; 1062 1063&remoteproc_cdsp { 1064 firmware-name = "qcom/sm8550/cdsp.mbn", 1065 "qcom/sm8550/cdsp_dtb.mbn"; 1066 status = "okay"; 1067}; 1068 1069&remoteproc_mpss { 1070 firmware-name = "qcom/sm8550/modem.mbn", 1071 "qcom/sm8550/modem_dtb.mbn"; 1072 status = "okay"; 1073}; 1074 1075&sdhc_2 { 1076 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_HIGH>; 1077 1078 pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; 1079 pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; 1080 pinctrl-names = "default", "sleep"; 1081 1082 vmmc-supply = <&vreg_l9b_2p9>; 1083 vqmmc-supply = <&vreg_l8b_1p8>; 1084 1085 bus-width = <4>; 1086 no-sdio; 1087 no-mmc; 1088 1089 status = "okay"; 1090}; 1091 1092&sleep_clk { 1093 clock-frequency = <32000>; 1094}; 1095 1096&swr0 { 1097 status = "okay"; 1098 1099 /* WSA8845, Speaker North */ 1100 north_spkr: speaker@0,0 { 1101 compatible = "sdw20217020400"; 1102 reg = <0 0>; 1103 1104 pinctrl-0 = <&spkr_1_sd_n_active>; 1105 pinctrl-names = "default"; 1106 1107 powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; 1108 1109 vdd-1p8-supply = <&vreg_l15b_1p8>; 1110 vdd-io-supply = <&vreg_l15b_1p8>; 1111 1112 #sound-dai-cells = <0>; 1113 sound-name-prefix = "SpkrLeft"; 1114 }; 1115 1116 /* WSA8845, Speaker South */ 1117 south_spkr: speaker@0,1 { 1118 compatible = "sdw20217020400"; 1119 reg = <0 1>; 1120 1121 pinctrl-0 = <&spkr_2_sd_n_active>; 1122 pinctrl-names = "default"; 1123 1124 powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; 1125 1126 vdd-1p8-supply = <&vreg_l15b_1p8>; 1127 vdd-io-supply = <&vreg_l15b_1p8>; 1128 1129 #sound-dai-cells = <0>; 1130 sound-name-prefix = "SpkrRight"; 1131 }; 1132}; 1133 1134&swr1 { 1135 status = "okay"; 1136 1137 /* WCD9385 RX */ 1138 wcd_rx: codec@0,4 { 1139 compatible = "sdw20217010d00"; 1140 reg = <0 4>; 1141 1142 /* 1143 * WCD9385 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) 1144 * WCD9385 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) 1145 * WCD9385 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) 1146 * WCD9385 RX Port 4 (LO) <=> SWR1 Port 4 (LO) 1147 * WCD9385 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) 1148 */ 1149 qcom,rx-port-mapping = <1 2 3 4 5>; 1150 }; 1151}; 1152 1153&swr2 { 1154 status = "okay"; 1155 1156 /* WCD9385 TX */ 1157 wcd_tx: codec@0,3 { 1158 compatible = "sdw20217010d00"; 1159 reg = <0 3>; 1160 1161 /* 1162 * WCD9385 TX Port 1 (ADC1,2) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) 1163 * WCD9385 TX Port 2 (ADC3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) 1164 * WCD9385 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) 1165 * WCD9385 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) 1166 */ 1167 qcom,tx-port-mapping = <2 2 3 4>; 1168 }; 1169}; 1170 1171&tlmm { 1172 /* Reserved I/Os for NFC */ 1173 gpio-reserved-ranges = <32 8>; 1174 1175 bt_default: bt-default-state { 1176 bt-en-pins { 1177 pins = "gpio81"; 1178 function = "gpio"; 1179 drive-strength = <16>; 1180 bias-disable; 1181 }; 1182 1183 sw-ctrl-pins { 1184 pins = "gpio82"; 1185 function = "gpio"; 1186 bias-pull-down; 1187 }; 1188 }; 1189 1190 lt9611_irq_pin: lt9611-irq-state { 1191 pins = "gpio8"; 1192 function = "gpio"; 1193 bias-disable; 1194 }; 1195 1196 lt9611_rst_pin: lt9611-rst-state { 1197 pins = "gpio7"; 1198 function = "gpio"; 1199 output-high; 1200 }; 1201 1202 wcd_default: wcd-reset-n-active-state { 1203 pins = "gpio108"; 1204 function = "gpio"; 1205 drive-strength = <16>; 1206 bias-disable; 1207 output-low; 1208 }; 1209}; 1210 1211&uart7 { 1212 status = "okay"; 1213}; 1214 1215&uart14 { 1216 status = "okay"; 1217 1218 bluetooth { 1219 compatible = "qcom,wcn7850-bt"; 1220 1221 vddio-supply = <&vreg_l15b_1p8>; 1222 vddaon-supply = <&vreg_s4e_0p95>; 1223 vdddig-supply = <&vreg_s4e_0p95>; 1224 vddrfa0p8-supply = <&vreg_s4e_0p95>; 1225 vddrfa1p2-supply = <&vreg_s4g_1p25>; 1226 vddrfa1p9-supply = <&vreg_s6g_1p86>; 1227 1228 max-speed = <3200000>; 1229 1230 enable-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; 1231 swctrl-gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; 1232 1233 pinctrl-0 = <&bt_default>; 1234 pinctrl-names = "default"; 1235 }; 1236}; 1237 1238&ufs_mem_hc { 1239 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; 1240 1241 vcc-supply = <&vreg_l17b_2p5>; 1242 vcc-max-microamp = <1300000>; 1243 vccq-supply = <&vreg_l1g_1p2>; 1244 vccq-max-microamp = <1200000>; 1245 vdd-hba-supply = <&vreg_l3g_1p2>; 1246 1247 status = "okay"; 1248}; 1249 1250&ufs_mem_phy { 1251 vdda-phy-supply = <&vreg_l1d_0p88>; 1252 vdda-pll-supply = <&vreg_l3e_1p2>; 1253 1254 status = "okay"; 1255}; 1256 1257&usb_1 { 1258 status = "okay"; 1259}; 1260 1261&usb_1_dwc3 { 1262 dr_mode = "otg"; 1263 usb-role-switch; 1264}; 1265 1266&usb_1_dwc3_hs { 1267 remote-endpoint = <&pmic_glink_hs_in>; 1268}; 1269 1270&usb_1_dwc3_ss { 1271 remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; 1272}; 1273 1274&usb_1_hsphy { 1275 vdd-supply = <&vreg_l1e_0p88>; 1276 vdda12-supply = <&vreg_l3e_1p2>; 1277 1278 phys = <&pm8550b_eusb2_repeater>; 1279 1280 status = "okay"; 1281}; 1282 1283&usb_dp_qmpphy { 1284 vdda-phy-supply = <&vreg_l3e_1p2>; 1285 vdda-pll-supply = <&vreg_l3f_0p88>; 1286 1287 orientation-switch; 1288 1289 status = "okay"; 1290}; 1291 1292&usb_dp_qmpphy_dp_in { 1293 remote-endpoint = <&mdss_dp0_out>; 1294}; 1295 1296&usb_dp_qmpphy_out { 1297 remote-endpoint = <&pmic_glink_ss_in>; 1298}; 1299 1300&usb_dp_qmpphy_usb_ss_in { 1301 remote-endpoint = <&usb_1_dwc3_ss>; 1302}; 1303 1304&xo_board { 1305 clock-frequency = <76800000>; 1306}; 1307