1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 9#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> 10#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h> 11#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> 12#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> 13#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> 14#include "sm8450.dtsi" 15#include "pm8350.dtsi" 16#include "pm8350b.dtsi" 17#include "pm8350c.dtsi" 18#include "pm8450.dtsi" 19#include "pmk8350.dtsi" 20#include "pmr735a.dtsi" 21 22/ { 23 model = "Qualcomm Technologies, Inc. SM8450 HDK"; 24 compatible = "qcom,sm8450-hdk", "qcom,sm8450"; 25 chassis-type = "embedded"; 26 27 aliases { 28 serial0 = &uart7; 29 }; 30 31 wcd938x: audio-codec { 32 compatible = "qcom,wcd9385-codec"; 33 34 pinctrl-names = "default"; 35 pinctrl-0 = <&wcd_default>; 36 37 qcom,micbias1-microvolt = <1800000>; 38 qcom,micbias2-microvolt = <1800000>; 39 qcom,micbias3-microvolt = <1800000>; 40 qcom,micbias4-microvolt = <1800000>; 41 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 42 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 43 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 44 qcom,rx-device = <&wcd_rx>; 45 qcom,tx-device = <&wcd_tx>; 46 47 reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; 48 49 vdd-buck-supply = <&vreg_s10b_1p8>; 50 vdd-rxtx-supply = <&vreg_s10b_1p8>; 51 vdd-io-supply = <&vreg_s10b_1p8>; 52 vdd-mic-bias-supply = <&vreg_bob>; 53 54 #sound-dai-cells = <1>; 55 }; 56 57 chosen { 58 stdout-path = "serial0:115200n8"; 59 }; 60 61 hdmi-out { 62 compatible = "hdmi-connector"; 63 type = "a"; 64 65 port { 66 hdmi_connector_out: endpoint { 67 remote-endpoint = <<9611_out>; 68 }; 69 }; 70 }; 71 72 lt9611_1v2: lt9611-vdd12-regulator { 73 compatible = "regulator-fixed"; 74 regulator-name = "LT9611_1V2"; 75 76 vin-supply = <&vph_pwr>; 77 regulator-min-microvolt = <1200000>; 78 regulator-max-microvolt = <1200000>; 79 gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; 80 enable-active-high; 81 }; 82 83 lt9611_3v3: lt9611-3v3-regulator { 84 compatible = "regulator-fixed"; 85 regulator-name = "LT9611_3V3"; 86 87 vin-supply = <&vreg_bob>; 88 gpio = <&tlmm 109 GPIO_ACTIVE_HIGH>; 89 regulator-min-microvolt = <3300000>; 90 regulator-max-microvolt = <3300000>; 91 enable-active-high; 92 }; 93 94 pmic-glink { 95 compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink"; 96 #address-cells = <1>; 97 #size-cells = <0>; 98 99 connector@0 { 100 compatible = "usb-c-connector"; 101 reg = <0>; 102 power-role = "dual"; 103 data-role = "dual"; 104 105 ports { 106 #address-cells = <1>; 107 #size-cells = <0>; 108 109 port@0 { 110 reg = <0>; 111 112 pmic_glink_hs_in: endpoint { 113 remote-endpoint = <&usb_1_dwc3_hs>; 114 }; 115 }; 116 117 port@1 { 118 reg = <1>; 119 120 pmic_glink_ss_in: endpoint { 121 remote-endpoint = <&usb_1_qmpphy_out>; 122 }; 123 }; 124 125 port@2 { 126 reg = <2>; 127 128 pmic_glink_sbu: endpoint { 129 remote-endpoint = <&fsa4480_sbu_mux>; 130 }; 131 }; 132 133 }; 134 }; 135 }; 136 137 thermal-zones { 138 camera-thermal { 139 polling-delay-passive = <250>; 140 polling-delay = <0>; 141 thermal-sensors = <&pmk8350_adc_tm 2>; 142 143 trips { 144 active-config0 { 145 temperature = <75000>; 146 hysteresis = <4000>; 147 type = "passive"; 148 }; 149 }; 150 }; 151 152 rear-tof-thermal { 153 polling-delay-passive = <250>; 154 polling-delay = <0>; 155 thermal-sensors = <&pmk8350_adc_tm 5>; 156 157 trips { 158 active-config0 { 159 temperature = <75000>; 160 hysteresis = <4000>; 161 type = "passive"; 162 }; 163 }; 164 }; 165 166 skin-msm-thermal { 167 polling-delay-passive = <250>; 168 polling-delay = <0>; 169 thermal-sensors = <&pmk8350_adc_tm 1>; 170 171 trips { 172 active-config0 { 173 temperature = <75000>; 174 hysteresis = <4000>; 175 type = "passive"; 176 }; 177 }; 178 }; 179 180 therm1-thermal { 181 polling-delay-passive = <250>; 182 polling-delay = <0>; 183 thermal-sensors = <&pmk8350_adc_tm 3>; 184 185 trips { 186 active-config0 { 187 temperature = <75000>; 188 hysteresis = <4000>; 189 type = "passive"; 190 }; 191 }; 192 }; 193 194 therm2-thermal { 195 polling-delay-passive = <250>; 196 polling-delay = <0>; 197 thermal-sensors = <&pmk8350_adc_tm 6>; 198 199 trips { 200 active-config0 { 201 temperature = <75000>; 202 hysteresis = <4000>; 203 type = "passive"; 204 }; 205 }; 206 }; 207 208 usb-conn-thermal { 209 polling-delay-passive = <250>; 210 polling-delay = <0>; 211 thermal-sensors = <&pmk8350_adc_tm 7>; 212 213 trips { 214 active-config0 { 215 temperature = <75000>; 216 hysteresis = <4000>; 217 type = "passive"; 218 }; 219 }; 220 }; 221 222 wide-rfc-thermal { 223 polling-delay-passive = <250>; 224 polling-delay = <0>; 225 thermal-sensors = <&pmk8350_adc_tm 4>; 226 227 trips { 228 active-config0 { 229 temperature = <75000>; 230 hysteresis = <4000>; 231 type = "passive"; 232 }; 233 }; 234 }; 235 236 xo-thermal { 237 polling-delay-passive = <0>; 238 polling-delay = <0>; 239 thermal-sensors = <&pmk8350_adc_tm 0>; 240 241 trips { 242 active-config0 { 243 temperature = <50000>; 244 hysteresis = <4000>; 245 type = "passive"; 246 }; 247 }; 248 }; 249 }; 250 251 vph_pwr: vph-pwr-regulator { 252 compatible = "regulator-fixed"; 253 regulator-name = "vph_pwr"; 254 regulator-min-microvolt = <3700000>; 255 regulator-max-microvolt = <3700000>; 256 257 regulator-always-on; 258 regulator-boot-on; 259 }; 260}; 261 262&apps_rsc { 263 regulators-0 { 264 compatible = "qcom,pm8350-rpmh-regulators"; 265 qcom,pmic-id = "b"; 266 267 vdd-s1-supply = <&vph_pwr>; 268 vdd-s2-supply = <&vph_pwr>; 269 vdd-s3-supply = <&vph_pwr>; 270 vdd-s4-supply = <&vph_pwr>; 271 vdd-s5-supply = <&vph_pwr>; 272 vdd-s6-supply = <&vph_pwr>; 273 vdd-s7-supply = <&vph_pwr>; 274 vdd-s8-supply = <&vph_pwr>; 275 vdd-s9-supply = <&vph_pwr>; 276 vdd-s10-supply = <&vph_pwr>; 277 vdd-s11-supply = <&vph_pwr>; 278 vdd-s12-supply = <&vph_pwr>; 279 280 vdd-l1-l4-supply = <&vreg_s11b_0p95>; 281 vdd-l2-l7-supply = <&vreg_bob>; 282 vdd-l3-l5-supply = <&vreg_bob>; 283 vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>; 284 vdd-l8-supply = <&vreg_s2h_0p95>; 285 286 vreg_s10b_1p8: smps10 { 287 regulator-name = "vreg_s10b_1p8"; 288 regulator-min-microvolt = <1800000>; 289 regulator-max-microvolt = <1800000>; 290 }; 291 292 vreg_s11b_0p95: smps11 { 293 regulator-name = "vreg_s11b_0p95"; 294 regulator-min-microvolt = <966000>; 295 regulator-max-microvolt = <1104000>; 296 }; 297 298 vreg_s12b_1p25: smps12 { 299 regulator-name = "vreg_s12b_1p25"; 300 regulator-min-microvolt = <1350000>; 301 regulator-max-microvolt = <1400000>; 302 }; 303 304 vreg_l1b_0p91: ldo1 { 305 regulator-name = "vreg_l1b_0p91"; 306 regulator-min-microvolt = <912000>; 307 regulator-max-microvolt = <920000>; 308 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 309 }; 310 311 vreg_l2b_3p07: ldo2 { 312 regulator-name = "vreg_l2b_3p07"; 313 regulator-min-microvolt = <3072000>; 314 regulator-max-microvolt = <3072000>; 315 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 316 }; 317 318 vreg_l3b_0p9: ldo3 { 319 regulator-name = "vreg_l3b_0p9"; 320 regulator-min-microvolt = <904000>; 321 regulator-max-microvolt = <904000>; 322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 323 }; 324 325 vreg_l5b_0p88: ldo5 { 326 regulator-name = "vreg_l5b_0p88"; 327 regulator-min-microvolt = <880000>; 328 regulator-max-microvolt = <888000>; 329 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 330 }; 331 332 vreg_l6b_1p2: ldo6 { 333 regulator-name = "vreg_l6b_1p2"; 334 regulator-min-microvolt = <1200000>; 335 regulator-max-microvolt = <1200000>; 336 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 337 }; 338 339 vreg_l7b_2p5: ldo7 { 340 regulator-name = "vreg_l7b_2p5"; 341 regulator-min-microvolt = <2504000>; 342 regulator-max-microvolt = <2504000>; 343 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 344 }; 345 346 vreg_l9b_1p2: ldo9 { 347 regulator-name = "vreg_l9b_1p2"; 348 regulator-min-microvolt = <1200000>; 349 regulator-max-microvolt = <1200000>; 350 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 351 }; 352 }; 353 354 regulators-1 { 355 compatible = "qcom,pm8350c-rpmh-regulators"; 356 qcom,pmic-id = "c"; 357 358 vdd-s1-supply = <&vph_pwr>; 359 vdd-s2-supply = <&vph_pwr>; 360 vdd-s3-supply = <&vph_pwr>; 361 vdd-s4-supply = <&vph_pwr>; 362 vdd-s5-supply = <&vph_pwr>; 363 vdd-s6-supply = <&vph_pwr>; 364 vdd-s7-supply = <&vph_pwr>; 365 vdd-s8-supply = <&vph_pwr>; 366 vdd-s9-supply = <&vph_pwr>; 367 vdd-s10-supply = <&vph_pwr>; 368 369 vdd-l1-l12-supply = <&vreg_bob>; 370 vdd-l2-l8-supply = <&vreg_bob>; 371 vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; 372 vdd-l6-l9-l11-supply = <&vreg_bob>; 373 vdd-l10-supply = <&vreg_s12b_1p25>; 374 375 vdd-bob-supply = <&vph_pwr>; 376 377 vreg_s1c_1p86: smps1 { 378 regulator-name = "vreg_s1c_1p86"; 379 regulator-min-microvolt = <1800000>; 380 regulator-max-microvolt = <2024000>; 381 }; 382 383 vreg_s10c_1p05: smps10 { 384 regulator-name = "vreg_s10c_1p05"; 385 regulator-min-microvolt = <1000000>; 386 regulator-max-microvolt = <1100000>; 387 }; 388 389 vreg_bob: bob { 390 regulator-name = "vreg_bob"; 391 regulator-min-microvolt = <3008000>; 392 regulator-max-microvolt = <3960000>; 393 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; 394 }; 395 396 vreg_l1c_1p8: ldo1 { 397 regulator-name = "vreg_l1c_1p8"; 398 regulator-min-microvolt = <1800000>; 399 regulator-max-microvolt = <1800000>; 400 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 401 }; 402 403 vreg_l3c_3p0: ldo3 { 404 regulator-name = "vreg_l3c_3p0"; 405 regulator-min-microvolt = <3296000>; 406 regulator-max-microvolt = <3304000>; 407 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 408 }; 409 410 vreg_l4c_1p8: ldo4 { 411 regulator-name = "vreg_l4c_1p8"; 412 regulator-min-microvolt = <1704000>; 413 regulator-max-microvolt = <3000000>; 414 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 415 }; 416 417 vreg_l5c_1p8: ldo5 { 418 regulator-name = "vreg_l5c_1p8"; 419 regulator-min-microvolt = <1704000>; 420 regulator-max-microvolt = <3000000>; 421 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 422 }; 423 424 vreg_l6c_1p8: ldo6 { 425 regulator-name = "vreg_l6c_1p8"; 426 regulator-min-microvolt = <1800000>; 427 regulator-max-microvolt = <3008000>; 428 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 429 }; 430 431 vreg_l7c_3p0: ldo7 { 432 regulator-name = "vreg_l7c_3p0"; 433 regulator-min-microvolt = <3008000>; 434 regulator-max-microvolt = <3008000>; 435 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 436 }; 437 438 vreg_l8c_1p8: ldo8 { 439 regulator-name = "vreg_l8c_1p8"; 440 regulator-min-microvolt = <1800000>; 441 regulator-max-microvolt = <1800000>; 442 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 443 }; 444 445 vreg_l9c_2p96: ldo9 { 446 regulator-name = "vreg_l9c_2p96"; 447 regulator-min-microvolt = <2960000>; 448 regulator-max-microvolt = <3008000>; 449 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 450 }; 451 452 vreg_l12c_1p8: ldo12 { 453 regulator-name = "vreg_l12c_1p8"; 454 regulator-min-microvolt = <1800000>; 455 regulator-max-microvolt = <1968000>; 456 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 457 }; 458 459 vreg_l13c_3p0: ldo13 { 460 regulator-name = "vreg_l13c_3p0"; 461 regulator-min-microvolt = <3000000>; 462 regulator-max-microvolt = <3000000>; 463 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 464 }; 465 }; 466 467 regulators-2 { 468 compatible = "qcom,pm8450-rpmh-regulators"; 469 qcom,pmic-id = "h"; 470 471 vdd-s1-supply = <&vph_pwr>; 472 vdd-s2-supply = <&vph_pwr>; 473 vdd-s3-supply = <&vph_pwr>; 474 vdd-s4-supply = <&vph_pwr>; 475 vdd-s5-supply = <&vph_pwr>; 476 vdd-s6-supply = <&vph_pwr>; 477 478 vdd-l2-supply = <&vreg_bob>; 479 vdd-l3-supply = <&vreg_bob>; 480 vdd-l4-supply = <&vreg_bob>; 481 482 vreg_s2h_0p95: smps2 { 483 regulator-name = "vreg_s2h_0p95"; 484 regulator-min-microvolt = <848000>; 485 regulator-max-microvolt = <1104000>; 486 }; 487 488 vreg_s3h_0p5: smps3 { 489 regulator-name = "vreg_s3h_0p5"; 490 regulator-min-microvolt = <500000>; 491 regulator-max-microvolt = <500000>; 492 }; 493 494 vreg_l2h_0p91: ldo2 { 495 regulator-name = "vreg_l2h_0p91"; 496 regulator-min-microvolt = <880000>; 497 regulator-max-microvolt = <912000>; 498 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 499 }; 500 501 vreg_l3h_0p91: ldo3 { 502 regulator-name = "vreg_l3h_0p91"; 503 regulator-min-microvolt = <912000>; 504 regulator-max-microvolt = <912000>; 505 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 506 }; 507 }; 508 509 regulators-3 { 510 compatible = "qcom,pmr735a-rpmh-regulators"; 511 qcom,pmic-id = "e"; 512 513 vdd-s1-supply = <&vph_pwr>; 514 vdd-s2-supply = <&vph_pwr>; 515 vdd-s3-supply = <&vph_pwr>; 516 517 vdd-l1-l2-supply = <&vreg_s2e_0p85>; 518 vdd-l3-supply = <&vreg_s1e_1p25>; 519 vdd-l4-supply = <&vreg_s1c_1p86>; 520 vdd-l5-l6-supply = <&vreg_s1c_1p86>; 521 vdd-l7-bob-supply = <&vreg_bob>; 522 523 vreg_s1e_1p25: smps1 { 524 regulator-name = "vreg_s1e_1p25"; 525 regulator-min-microvolt = <1200000>; 526 regulator-max-microvolt = <1296000>; 527 }; 528 529 vreg_s2e_0p85: smps2 { 530 regulator-name = "vreg_s2e_0p85"; 531 regulator-min-microvolt = <500000>; 532 regulator-max-microvolt = <1040000>; 533 }; 534 535 vreg_l1e_0p8: ldo1 { 536 regulator-name = "vreg_l1e_0p8"; 537 regulator-min-microvolt = <800000>; 538 regulator-max-microvolt = <800000>; 539 }; 540 541 vreg_l2e_0p8: ldo2 { 542 regulator-name = "vreg_l2e_0p8"; 543 regulator-min-microvolt = <800000>; 544 regulator-max-microvolt = <800000>; 545 }; 546 547 vreg_l3e_1p2: ldo3 { 548 regulator-name = "vreg_l3e_1p2"; 549 regulator-min-microvolt = <1200000>; 550 regulator-max-microvolt = <1200000>; 551 }; 552 553 vreg_l4e_1p7: ldo4 { 554 regulator-name = "vreg_l4e_1p7"; 555 regulator-min-microvolt = <1776000>; 556 regulator-max-microvolt = <1776000>; 557 }; 558 559 vreg_l5e_0p88: ldo5 { 560 regulator-name = "vreg_l5e_0p88"; 561 regulator-min-microvolt = <880000>; 562 regulator-max-microvolt = <880000>; 563 }; 564 565 vreg_l6e_1p2: ldo6 { 566 regulator-name = "vreg_l6e_1p2"; 567 regulator-min-microvolt = <1200000>; 568 regulator-max-microvolt = <1200000>; 569 }; 570 571 vreg_l7e_2p8: ldo7 { 572 regulator-name = "vreg_l7e_2p8"; 573 regulator-min-microvolt = <2800000>; 574 regulator-max-microvolt = <2800000>; 575 }; 576 }; 577}; 578 579&dispcc { 580 status = "okay"; 581}; 582 583&gpu { 584 status = "okay"; 585 586 zap-shader { 587 firmware-name = "qcom/sm8450/a730_zap.mbn"; 588 }; 589}; 590 591&i2c9 { 592 clock-frequency = <400000>; 593 status = "okay"; 594 595 lt9611_codec: hdmi-bridge@2b { 596 compatible = "lontium,lt9611uxc"; 597 reg = <0x2b>; 598 599 interrupts-extended = <&tlmm 44 IRQ_TYPE_EDGE_FALLING>; 600 601 reset-gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>; 602 603 vdd-supply = <<9611_1v2>; 604 vcc-supply = <<9611_3v3>; 605 606 pinctrl-names = "default"; 607 pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; 608 609 ports { 610 #address-cells = <1>; 611 #size-cells = <0>; 612 613 port@0 { 614 reg = <0>; 615 616 lt9611_a: endpoint { 617 remote-endpoint = <&mdss_dsi0_out>; 618 }; 619 }; 620 621 port@2 { 622 reg = <2>; 623 624 lt9611_out: endpoint { 625 remote-endpoint = <&hdmi_connector_out>; 626 }; 627 }; 628 }; 629 }; 630}; 631 632&i2c5 { 633 clock-frequency = <100000>; 634 635 status = "okay"; 636 637 typec-mux@42 { 638 compatible = "fcs,fsa4480"; 639 reg = <0x42>; 640 641 interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; 642 643 vcc-supply = <&vreg_bob>; 644 mode-switch; 645 orientation-switch; 646 647 port { 648 fsa4480_sbu_mux: endpoint { 649 remote-endpoint = <&pmic_glink_sbu>; 650 }; 651 }; 652 }; 653}; 654 655&mdss { 656 status = "okay"; 657}; 658 659&mdss_dsi0 { 660 vdda-supply = <&vreg_l6b_1p2>; 661 status = "okay"; 662}; 663 664&mdss_dsi0_out { 665 remote-endpoint = <<9611_a>; 666 data-lanes = <0 1 2 3>; 667}; 668 669&mdss_dsi0_phy { 670 vdds-supply = <&vreg_l5b_0p88>; 671 status = "okay"; 672}; 673 674&mdss_dp0 { 675 status = "okay"; 676 677 ports { 678 port@1 { 679 reg = <1>; 680 681 mdss_dp0_out: endpoint { 682 data-lanes = <0 1>; 683 remote-endpoint = <&usb_1_qmpphy_dp_in>; 684 }; 685 }; 686 }; 687}; 688 689&pcie0 { 690 status = "okay"; 691 max-link-speed = <2>; 692}; 693 694&pcie0_phy { 695 status = "okay"; 696 vdda-phy-supply = <&vreg_l5b_0p88>; 697 vdda-pll-supply = <&vreg_l6b_1p2>; 698}; 699 700&pcie1 { 701 status = "okay"; 702}; 703 704&pcie1_phy { 705 status = "okay"; 706 vdda-phy-supply = <&vreg_l2h_0p91>; 707 vdda-pll-supply = <&vreg_l6b_1p2>; 708}; 709 710&pm8350_temp_alarm { 711 io-channels = <&pmk8350_vadc PM8350_ADC7_DIE_TEMP(1)>; 712 io-channel-names = "thermal"; 713}; 714 715&pm8350b_temp_alarm { 716 io-channels = <&pmk8350_vadc PM8350B_ADC7_DIE_TEMP>; 717 io-channel-names = "thermal"; 718}; 719 720&pmr735a_temp_alarm { 721 io-channels = <&pmk8350_vadc PMR735A_ADC7_DIE_TEMP>; 722 io-channel-names = "thermal"; 723}; 724 725&pmk8350_adc_tm { 726 status = "okay"; 727 728 xo-therm@0 { 729 reg = <0>; 730 io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; 731 qcom,ratiometric; 732 qcom,hw-settle-time-us = <200>; 733 }; 734 735 skin-msm-therm@1 { 736 reg = <1>; 737 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; 738 qcom,ratiometric; 739 qcom,hw-settle-time-us = <200>; 740 }; 741 742 camera-therm@2 { 743 reg = <2>; 744 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; 745 qcom,ratiometric; 746 qcom,hw-settle-time-us = <200>; 747 }; 748 749 therm1-therm@3 { 750 reg = <3>; 751 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; 752 qcom,ratiometric; 753 qcom,hw-settle-time-us = <200>; 754 }; 755 756 wide-rfc-therm@4 { 757 reg = <4>; 758 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; 759 qcom,ratiometric; 760 qcom,hw-settle-time-us = <200>; 761 }; 762 763 rear-tof-therm@5 { 764 reg = <5>; 765 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU(1)>; 766 qcom,ratiometric; 767 qcom,hw-settle-time-us = <200>; 768 }; 769 770 therm2-therm@6 { 771 reg = <6>; 772 io-channels = <&pmk8350_vadc PM8350_ADC7_GPIO3_100K_PU(1)>; 773 qcom,ratiometric; 774 qcom,hw-settle-time-us = <200>; 775 }; 776 777 usb-conn-therm@7 { 778 reg = <7>; 779 io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM5_100K_PU>; 780 qcom,ratiometric; 781 qcom,hw-settle-time-us = <200>; 782 }; 783}; 784 785&pmk8350_vadc { 786 status = "okay"; 787 788 channel@3 { 789 reg = <PMK8350_ADC7_DIE_TEMP>; 790 label = "pmk8350_die_temp"; 791 }; 792 793 channel@44 { 794 reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; 795 qcom,hw-settle-time = <200>; 796 qcom,ratiometric; 797 label = "pmk8350_xo_therm"; 798 }; 799 800 channel@103 { 801 reg = <PM8350_ADC7_DIE_TEMP(1)>; 802 label = "pm8350_die_temp"; 803 }; 804 805 channel@144 { 806 reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; 807 qcom,hw-settle-time = <200>; 808 qcom,ratiometric; 809 label = "skin_msm_temp"; 810 }; 811 812 channel@145 { 813 reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; 814 qcom,hw-settle-time = <200>; 815 qcom,ratiometric; 816 label = "camera_temp"; 817 }; 818 819 channel@146 { 820 reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; 821 qcom,hw-settle-time = <200>; 822 qcom,ratiometric; 823 label = "therm1_temp"; 824 }; 825 826 channel@147 { 827 reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; 828 qcom,hw-settle-time = <200>; 829 qcom,ratiometric; 830 label = "wide_rfc_temp"; 831 }; 832 833 channel@148 { 834 reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>; 835 qcom,hw-settle-time = <200>; 836 qcom,ratiometric; 837 label = "rear_tof_temp"; 838 }; 839 840 channel@14c { 841 reg = <PM8350_ADC7_GPIO3_100K_PU(1)>; 842 qcom,hw-settle-time = <200>; 843 qcom,ratiometric; 844 label = "therm2_temp"; 845 }; 846 847 channel@303 { 848 reg = <PM8350B_ADC7_DIE_TEMP>; 849 label = "pm8350b_die_temp"; 850 }; 851 852 channel@348 { 853 reg = <PM8350B_ADC7_AMUX_THM5_100K_PU>; 854 qcom,hw-settle-time = <200>; 855 qcom,ratiometric; 856 label = "usb_conn_temp"; 857 }; 858 859 channel@403 { 860 reg = <PMR735A_ADC7_DIE_TEMP>; 861 label = "pmr735a_die_temp"; 862 }; 863 864 channel@44a { 865 reg = <PMR735A_ADC7_GPIO1_100K_PU>; 866 qcom,hw-settle-time = <200>; 867 qcom,ratiometric; 868 label = "qtm_w_temp"; 869 }; 870 871 channel@44b { 872 reg = <PMR735A_ADC7_GPIO2_100K_PU>; 873 qcom,hw-settle-time = <200>; 874 qcom,ratiometric; 875 label = "qtm_n_temp"; 876 }; 877}; 878 879&remoteproc_adsp { 880 status = "okay"; 881 firmware-name = "qcom/sm8450/adsp.mbn"; 882}; 883 884&remoteproc_cdsp { 885 status = "okay"; 886 firmware-name = "qcom/sm8450/cdsp.mbn"; 887}; 888 889&remoteproc_mpss { 890 status = "okay"; 891 firmware-name = "qcom/sm8450/modem.mbn"; 892}; 893 894&remoteproc_slpi { 895 status = "okay"; 896 firmware-name = "qcom/sm8450/slpi.mbn"; 897}; 898 899&qupv3_id_0 { 900 status = "okay"; 901}; 902 903&qupv3_id_1 { 904 status = "okay"; 905}; 906 907&sdhc_2 { 908 cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; 909 pinctrl-names = "default", "sleep"; 910 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; 911 pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; 912 vmmc-supply = <&vreg_l9c_2p96>; 913 vqmmc-supply = <&vreg_l6c_1p8>; 914 no-sdio; 915 no-mmc; 916 status = "okay"; 917}; 918 919&sound { 920 compatible = "qcom,sm8450-sndcard"; 921 model = "SM8450-HDK"; 922 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", 923 "SpkrRight IN", "WSA_SPK2 OUT", 924 "IN1_HPHL", "HPHL_OUT", 925 "IN2_HPHR", "HPHR_OUT", 926 "AMIC1", "MIC BIAS1", 927 "AMIC2", "MIC BIAS2", 928 "AMIC3", "MIC BIAS3", 929 "AMIC4", "MIC BIAS3", 930 "AMIC5", "MIC BIAS4", 931 "VA DMIC0", "MIC BIAS3", 932 "VA DMIC1", "MIC BIAS3", 933 "VA DMIC2", "MIC BIAS1", 934 "VA DMIC3", "MIC BIAS1", 935 "TX DMIC0", "MIC BIAS3", 936 "TX DMIC1", "MIC BIAS3", 937 "TX DMIC2", "MIC BIAS1", 938 "TX DMIC3", "MIC BIAS1", 939 "TX SWR_INPUT0", "ADC1_OUTPUT", 940 "TX SWR_INPUT1", "ADC2_OUTPUT", 941 "TX SWR_INPUT0", "ADC3_OUTPUT", 942 "TX SWR_INPUT1", "ADC4_OUTPUT"; 943 944 wcd-playback-dai-link { 945 link-name = "WCD Playback"; 946 947 cpu { 948 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 949 }; 950 951 codec { 952 sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; 953 }; 954 955 platform { 956 sound-dai = <&q6apm>; 957 }; 958 }; 959 960 wcd-capture-dai-link { 961 link-name = "WCD Capture"; 962 963 cpu { 964 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 965 }; 966 967 codec { 968 sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; 969 }; 970 971 platform { 972 sound-dai = <&q6apm>; 973 }; 974 }; 975 976 wsa-dai-link { 977 link-name = "WSA Playback"; 978 979 cpu { 980 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 981 }; 982 983 codec { 984 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; 985 }; 986 987 platform { 988 sound-dai = <&q6apm>; 989 }; 990 }; 991 992 va-dai-link { 993 link-name = "VA Capture"; 994 995 cpu { 996 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 997 }; 998 999 codec { 1000 sound-dai = <&vamacro 0>; 1001 }; 1002 1003 platform { 1004 sound-dai = <&q6apm>; 1005 }; 1006 }; 1007}; 1008 1009&swr0 { 1010 status = "okay"; 1011 1012 left_spkr: speaker@0,1 { 1013 compatible = "sdw10217020200"; 1014 reg = <0 1>; 1015 pinctrl-names = "default"; 1016 pinctrl-0 = <&spkr_1_sd_n_active>; 1017 powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; 1018 #sound-dai-cells = <0>; 1019 sound-name-prefix = "SpkrLeft"; 1020 #thermal-sensor-cells = <0>; 1021 vdd-supply = <&vreg_s10b_1p8>; 1022 }; 1023 1024 right_spkr: speaker@0,2 { 1025 compatible = "sdw10217020200"; 1026 reg = <0 2>; 1027 pinctrl-names = "default"; 1028 pinctrl-0 = <&spkr_2_sd_n_active>; 1029 powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; 1030 #sound-dai-cells = <0>; 1031 sound-name-prefix = "SpkrRight"; 1032 #thermal-sensor-cells = <0>; 1033 vdd-supply = <&vreg_s10b_1p8>; 1034 }; 1035}; 1036 1037&swr1 { 1038 status = "okay"; 1039 1040 wcd_rx: codec@0,4 { 1041 compatible = "sdw20217010d00"; 1042 reg = <0 4>; 1043 qcom,rx-port-mapping = <1 2 3 4 5>; 1044 }; 1045}; 1046 1047&swr2 { 1048 status = "okay"; 1049 1050 wcd_tx: codec@0,3 { 1051 compatible = "sdw20217010d00"; 1052 reg = <0 3>; 1053 qcom,tx-port-mapping = <1 1 2 3>; 1054 }; 1055}; 1056 1057&tlmm { 1058 gpio-reserved-ranges = <28 4>, <36 4>; 1059 1060 lt9611_irq_pin: lt9611-irq-state { 1061 pins = "gpio44"; 1062 function = "gpio"; 1063 bias-disable; 1064 }; 1065 1066 lt9611_rst_pin: lt9611-rst-state { 1067 pins = "gpio107"; 1068 function = "gpio"; 1069 output-high; 1070 }; 1071 1072 sdc2_card_det_n: sd-card-det-n-state { 1073 pins = "gpio92"; 1074 function = "gpio"; 1075 drive-strength = <2>; 1076 bias-pull-up; 1077 }; 1078}; 1079 1080&uart7 { 1081 status = "okay"; 1082}; 1083 1084&ufs_mem_hc { 1085 status = "okay"; 1086 1087 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; 1088 1089 vcc-supply = <&vreg_l7b_2p5>; 1090 vcc-max-microamp = <1100000>; 1091 vccq-supply = <&vreg_l9b_1p2>; 1092 vccq-max-microamp = <1200000>; 1093 vdd-hba-supply = <&vreg_l9b_1p2>; 1094}; 1095 1096&ufs_mem_phy { 1097 status = "okay"; 1098 1099 vdda-phy-supply = <&vreg_l5b_0p88>; 1100 vdda-pll-supply = <&vreg_l6b_1p2>; 1101}; 1102 1103&usb_1 { 1104 status = "okay"; 1105}; 1106 1107&usb_1_dwc3 { 1108 dr_mode = "otg"; 1109 usb-role-switch; 1110}; 1111 1112&usb_1_dwc3_hs { 1113 remote-endpoint = <&pmic_glink_hs_in>; 1114}; 1115 1116&usb_1_dwc3_ss { 1117 remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; 1118}; 1119 1120&usb_1_hsphy { 1121 status = "okay"; 1122 1123 vdda-pll-supply = <&vreg_l5b_0p88>; 1124 vdda18-supply = <&vreg_l1c_1p8>; 1125 vdda33-supply = <&vreg_l2b_3p07>; 1126}; 1127 1128&usb_1_qmpphy { 1129 status = "okay"; 1130 1131 vdda-phy-supply = <&vreg_l6b_1p2>; 1132 vdda-pll-supply = <&vreg_l1b_0p91>; 1133 1134 orientation-switch; 1135}; 1136 1137&usb_1_qmpphy_dp_in { 1138 remote-endpoint = <&mdss_dp0_out>; 1139}; 1140 1141&usb_1_qmpphy_out { 1142 remote-endpoint = <&pmic_glink_ss_in>; 1143}; 1144 1145&usb_1_qmpphy_usb_ss_in { 1146 remote-endpoint = <&usb_1_dwc3_ss>; 1147}; 1148 1149&vamacro { 1150 pinctrl-0 = <&dmic01_default>, <&dmic23_default>; 1151 pinctrl-names = "default"; 1152 vdd-micb-supply = <&vreg_s10b_1p8>; 1153 qcom,dmic-sample-rate = <600000>; 1154 1155 status = "okay"; 1156}; 1157 1158&tlmm { 1159 spkr_1_sd_n_active: spkr-1-sd-n-active-state { 1160 pins = "gpio1"; 1161 function = "gpio"; 1162 drive-strength = <16>; 1163 bias-disable; 1164 output-low; 1165 }; 1166 1167 spkr_2_sd_n_active: spkr-2-sd-n-active-state { 1168 pins = "gpio89"; 1169 function = "gpio"; 1170 drive-strength = <16>; 1171 bias-disable; 1172 output-low; 1173 }; 1174 1175 wcd_default: wcd-reset-n-active-state { 1176 pins = "gpio43"; 1177 function = "gpio"; 1178 drive-strength = <16>; 1179 bias-disable; 1180 output-low; 1181 }; 1182}; 1183