1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Linaro Limited 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 9#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> 10#include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h> 11#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> 12#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> 13#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> 14#include "sm8450.dtsi" 15#include "pm8350.dtsi" 16#include "pm8350b.dtsi" 17#include "pm8350c.dtsi" 18#include "pm8450.dtsi" 19#include "pmk8350.dtsi" 20#include "pmr735a.dtsi" 21 22/ { 23 model = "Qualcomm Technologies, Inc. SM8450 HDK"; 24 compatible = "qcom,sm8450-hdk", "qcom,sm8450"; 25 chassis-type = "embedded"; 26 27 aliases { 28 serial0 = &uart7; 29 }; 30 31 wcd938x: audio-codec { 32 compatible = "qcom,wcd9385-codec"; 33 34 pinctrl-names = "default"; 35 pinctrl-0 = <&wcd_default>; 36 37 qcom,micbias1-microvolt = <1800000>; 38 qcom,micbias2-microvolt = <1800000>; 39 qcom,micbias3-microvolt = <1800000>; 40 qcom,micbias4-microvolt = <1800000>; 41 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; 42 qcom,mbhc-headset-vthreshold-microvolt = <1700000>; 43 qcom,mbhc-headphone-vthreshold-microvolt = <50000>; 44 qcom,rx-device = <&wcd_rx>; 45 qcom,tx-device = <&wcd_tx>; 46 47 reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; 48 49 vdd-buck-supply = <&vreg_s10b_1p8>; 50 vdd-rxtx-supply = <&vreg_s10b_1p8>; 51 vdd-io-supply = <&vreg_s10b_1p8>; 52 vdd-mic-bias-supply = <&vreg_bob>; 53 54 #sound-dai-cells = <1>; 55 }; 56 57 chosen { 58 stdout-path = "serial0:115200n8"; 59 }; 60 61 hdmi-out { 62 compatible = "hdmi-connector"; 63 type = "a"; 64 65 port { 66 hdmi_connector_out: endpoint { 67 remote-endpoint = <<9611_out>; 68 }; 69 }; 70 }; 71 72 lt9611_1v2: lt9611-vdd12-regulator { 73 compatible = "regulator-fixed"; 74 regulator-name = "LT9611_1V2"; 75 76 vin-supply = <&vph_pwr>; 77 regulator-min-microvolt = <1200000>; 78 regulator-max-microvolt = <1200000>; 79 gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; 80 enable-active-high; 81 }; 82 83 lt9611_3v3: lt9611-3v3-regulator { 84 compatible = "regulator-fixed"; 85 regulator-name = "LT9611_3V3"; 86 87 vin-supply = <&vreg_bob>; 88 gpio = <&tlmm 109 GPIO_ACTIVE_HIGH>; 89 regulator-min-microvolt = <3300000>; 90 regulator-max-microvolt = <3300000>; 91 enable-active-high; 92 }; 93 94 pmic-glink { 95 compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink"; 96 #address-cells = <1>; 97 #size-cells = <0>; 98 orientation-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>; 99 100 connector@0 { 101 compatible = "usb-c-connector"; 102 reg = <0>; 103 power-role = "dual"; 104 data-role = "dual"; 105 106 ports { 107 #address-cells = <1>; 108 #size-cells = <0>; 109 110 port@0 { 111 reg = <0>; 112 113 pmic_glink_hs_in: endpoint { 114 remote-endpoint = <&usb_1_dwc3_hs>; 115 }; 116 }; 117 118 port@1 { 119 reg = <1>; 120 121 pmic_glink_ss_in: endpoint { 122 remote-endpoint = <&usb_1_qmpphy_out>; 123 }; 124 }; 125 126 port@2 { 127 reg = <2>; 128 129 pmic_glink_sbu: endpoint { 130 remote-endpoint = <&fsa4480_sbu_mux>; 131 }; 132 }; 133 134 }; 135 }; 136 }; 137 138 thermal-zones { 139 camera-thermal { 140 polling-delay-passive = <250>; 141 polling-delay = <0>; 142 thermal-sensors = <&pmk8350_adc_tm 2>; 143 144 trips { 145 active-config0 { 146 temperature = <75000>; 147 hysteresis = <4000>; 148 type = "passive"; 149 }; 150 }; 151 }; 152 153 rear-tof-thermal { 154 polling-delay-passive = <250>; 155 polling-delay = <0>; 156 thermal-sensors = <&pmk8350_adc_tm 5>; 157 158 trips { 159 active-config0 { 160 temperature = <75000>; 161 hysteresis = <4000>; 162 type = "passive"; 163 }; 164 }; 165 }; 166 167 skin-msm-thermal { 168 polling-delay-passive = <250>; 169 polling-delay = <0>; 170 thermal-sensors = <&pmk8350_adc_tm 1>; 171 172 trips { 173 active-config0 { 174 temperature = <75000>; 175 hysteresis = <4000>; 176 type = "passive"; 177 }; 178 }; 179 }; 180 181 therm1-thermal { 182 polling-delay-passive = <250>; 183 polling-delay = <0>; 184 thermal-sensors = <&pmk8350_adc_tm 3>; 185 186 trips { 187 active-config0 { 188 temperature = <75000>; 189 hysteresis = <4000>; 190 type = "passive"; 191 }; 192 }; 193 }; 194 195 therm2-thermal { 196 polling-delay-passive = <250>; 197 polling-delay = <0>; 198 thermal-sensors = <&pmk8350_adc_tm 6>; 199 200 trips { 201 active-config0 { 202 temperature = <75000>; 203 hysteresis = <4000>; 204 type = "passive"; 205 }; 206 }; 207 }; 208 209 usb-conn-thermal { 210 polling-delay-passive = <250>; 211 polling-delay = <0>; 212 thermal-sensors = <&pmk8350_adc_tm 7>; 213 214 trips { 215 active-config0 { 216 temperature = <75000>; 217 hysteresis = <4000>; 218 type = "passive"; 219 }; 220 }; 221 }; 222 223 wide-rfc-thermal { 224 polling-delay-passive = <250>; 225 polling-delay = <0>; 226 thermal-sensors = <&pmk8350_adc_tm 4>; 227 228 trips { 229 active-config0 { 230 temperature = <75000>; 231 hysteresis = <4000>; 232 type = "passive"; 233 }; 234 }; 235 }; 236 237 xo-thermal { 238 polling-delay-passive = <0>; 239 polling-delay = <0>; 240 thermal-sensors = <&pmk8350_adc_tm 0>; 241 242 trips { 243 active-config0 { 244 temperature = <50000>; 245 hysteresis = <4000>; 246 type = "passive"; 247 }; 248 }; 249 }; 250 }; 251 252 vph_pwr: vph-pwr-regulator { 253 compatible = "regulator-fixed"; 254 regulator-name = "vph_pwr"; 255 regulator-min-microvolt = <3700000>; 256 regulator-max-microvolt = <3700000>; 257 258 regulator-always-on; 259 regulator-boot-on; 260 }; 261}; 262 263&apps_rsc { 264 regulators-0 { 265 compatible = "qcom,pm8350-rpmh-regulators"; 266 qcom,pmic-id = "b"; 267 268 vdd-s1-supply = <&vph_pwr>; 269 vdd-s2-supply = <&vph_pwr>; 270 vdd-s3-supply = <&vph_pwr>; 271 vdd-s4-supply = <&vph_pwr>; 272 vdd-s5-supply = <&vph_pwr>; 273 vdd-s6-supply = <&vph_pwr>; 274 vdd-s7-supply = <&vph_pwr>; 275 vdd-s8-supply = <&vph_pwr>; 276 vdd-s9-supply = <&vph_pwr>; 277 vdd-s10-supply = <&vph_pwr>; 278 vdd-s11-supply = <&vph_pwr>; 279 vdd-s12-supply = <&vph_pwr>; 280 281 vdd-l1-l4-supply = <&vreg_s11b_0p95>; 282 vdd-l2-l7-supply = <&vreg_bob>; 283 vdd-l3-l5-supply = <&vreg_bob>; 284 vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>; 285 vdd-l8-supply = <&vreg_s2h_0p95>; 286 287 vreg_s10b_1p8: smps10 { 288 regulator-name = "vreg_s10b_1p8"; 289 regulator-min-microvolt = <1800000>; 290 regulator-max-microvolt = <1800000>; 291 }; 292 293 vreg_s11b_0p95: smps11 { 294 regulator-name = "vreg_s11b_0p95"; 295 regulator-min-microvolt = <966000>; 296 regulator-max-microvolt = <1104000>; 297 }; 298 299 vreg_s12b_1p25: smps12 { 300 regulator-name = "vreg_s12b_1p25"; 301 regulator-min-microvolt = <1350000>; 302 regulator-max-microvolt = <1400000>; 303 }; 304 305 vreg_l1b_0p91: ldo1 { 306 regulator-name = "vreg_l1b_0p91"; 307 regulator-min-microvolt = <912000>; 308 regulator-max-microvolt = <920000>; 309 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 310 }; 311 312 vreg_l2b_3p07: ldo2 { 313 regulator-name = "vreg_l2b_3p07"; 314 regulator-min-microvolt = <3072000>; 315 regulator-max-microvolt = <3072000>; 316 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 317 }; 318 319 vreg_l3b_0p9: ldo3 { 320 regulator-name = "vreg_l3b_0p9"; 321 regulator-min-microvolt = <904000>; 322 regulator-max-microvolt = <904000>; 323 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 324 }; 325 326 vreg_l5b_0p88: ldo5 { 327 regulator-name = "vreg_l5b_0p88"; 328 regulator-min-microvolt = <880000>; 329 regulator-max-microvolt = <888000>; 330 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 331 }; 332 333 vreg_l6b_1p2: ldo6 { 334 regulator-name = "vreg_l6b_1p2"; 335 regulator-min-microvolt = <1200000>; 336 regulator-max-microvolt = <1200000>; 337 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 338 }; 339 340 vreg_l7b_2p5: ldo7 { 341 regulator-name = "vreg_l7b_2p5"; 342 regulator-min-microvolt = <2504000>; 343 regulator-max-microvolt = <2504000>; 344 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 345 }; 346 347 vreg_l9b_1p2: ldo9 { 348 regulator-name = "vreg_l9b_1p2"; 349 regulator-min-microvolt = <1200000>; 350 regulator-max-microvolt = <1200000>; 351 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 352 }; 353 }; 354 355 regulators-1 { 356 compatible = "qcom,pm8350c-rpmh-regulators"; 357 qcom,pmic-id = "c"; 358 359 vdd-s1-supply = <&vph_pwr>; 360 vdd-s2-supply = <&vph_pwr>; 361 vdd-s3-supply = <&vph_pwr>; 362 vdd-s4-supply = <&vph_pwr>; 363 vdd-s5-supply = <&vph_pwr>; 364 vdd-s6-supply = <&vph_pwr>; 365 vdd-s7-supply = <&vph_pwr>; 366 vdd-s8-supply = <&vph_pwr>; 367 vdd-s9-supply = <&vph_pwr>; 368 vdd-s10-supply = <&vph_pwr>; 369 370 vdd-l1-l12-supply = <&vreg_bob>; 371 vdd-l2-l8-supply = <&vreg_bob>; 372 vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; 373 vdd-l6-l9-l11-supply = <&vreg_bob>; 374 vdd-l10-supply = <&vreg_s12b_1p25>; 375 376 vdd-bob-supply = <&vph_pwr>; 377 378 vreg_s1c_1p86: smps1 { 379 regulator-name = "vreg_s1c_1p86"; 380 regulator-min-microvolt = <1800000>; 381 regulator-max-microvolt = <2024000>; 382 }; 383 384 vreg_s10c_1p05: smps10 { 385 regulator-name = "vreg_s10c_1p05"; 386 regulator-min-microvolt = <1000000>; 387 regulator-max-microvolt = <1100000>; 388 }; 389 390 vreg_bob: bob { 391 regulator-name = "vreg_bob"; 392 regulator-min-microvolt = <3008000>; 393 regulator-max-microvolt = <3960000>; 394 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; 395 }; 396 397 vreg_l1c_1p8: ldo1 { 398 regulator-name = "vreg_l1c_1p8"; 399 regulator-min-microvolt = <1800000>; 400 regulator-max-microvolt = <1800000>; 401 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 402 }; 403 404 vreg_l3c_3p0: ldo3 { 405 regulator-name = "vreg_l3c_3p0"; 406 regulator-min-microvolt = <3296000>; 407 regulator-max-microvolt = <3304000>; 408 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 409 }; 410 411 vreg_l4c_1p8: ldo4 { 412 regulator-name = "vreg_l4c_1p8"; 413 regulator-min-microvolt = <1704000>; 414 regulator-max-microvolt = <3000000>; 415 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 416 }; 417 418 vreg_l5c_1p8: ldo5 { 419 regulator-name = "vreg_l5c_1p8"; 420 regulator-min-microvolt = <1704000>; 421 regulator-max-microvolt = <3000000>; 422 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 423 }; 424 425 vreg_l6c_1p8: ldo6 { 426 regulator-name = "vreg_l6c_1p8"; 427 regulator-min-microvolt = <1800000>; 428 regulator-max-microvolt = <3008000>; 429 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 430 }; 431 432 vreg_l7c_3p0: ldo7 { 433 regulator-name = "vreg_l7c_3p0"; 434 regulator-min-microvolt = <3008000>; 435 regulator-max-microvolt = <3008000>; 436 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 437 }; 438 439 vreg_l8c_1p8: ldo8 { 440 regulator-name = "vreg_l8c_1p8"; 441 regulator-min-microvolt = <1800000>; 442 regulator-max-microvolt = <1800000>; 443 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 444 }; 445 446 vreg_l9c_2p96: ldo9 { 447 regulator-name = "vreg_l9c_2p96"; 448 regulator-min-microvolt = <2960000>; 449 regulator-max-microvolt = <3008000>; 450 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 451 }; 452 453 vreg_l12c_1p8: ldo12 { 454 regulator-name = "vreg_l12c_1p8"; 455 regulator-min-microvolt = <1800000>; 456 regulator-max-microvolt = <1968000>; 457 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 458 }; 459 460 vreg_l13c_3p0: ldo13 { 461 regulator-name = "vreg_l13c_3p0"; 462 regulator-min-microvolt = <3000000>; 463 regulator-max-microvolt = <3000000>; 464 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 465 }; 466 }; 467 468 regulators-2 { 469 compatible = "qcom,pm8450-rpmh-regulators"; 470 qcom,pmic-id = "h"; 471 472 vdd-s1-supply = <&vph_pwr>; 473 vdd-s2-supply = <&vph_pwr>; 474 vdd-s3-supply = <&vph_pwr>; 475 vdd-s4-supply = <&vph_pwr>; 476 vdd-s5-supply = <&vph_pwr>; 477 vdd-s6-supply = <&vph_pwr>; 478 479 vdd-l2-supply = <&vreg_bob>; 480 vdd-l3-supply = <&vreg_bob>; 481 vdd-l4-supply = <&vreg_bob>; 482 483 vreg_s2h_0p95: smps2 { 484 regulator-name = "vreg_s2h_0p95"; 485 regulator-min-microvolt = <848000>; 486 regulator-max-microvolt = <1104000>; 487 }; 488 489 vreg_s3h_0p5: smps3 { 490 regulator-name = "vreg_s3h_0p5"; 491 regulator-min-microvolt = <500000>; 492 regulator-max-microvolt = <500000>; 493 }; 494 495 vreg_l2h_0p91: ldo2 { 496 regulator-name = "vreg_l2h_0p91"; 497 regulator-min-microvolt = <880000>; 498 regulator-max-microvolt = <912000>; 499 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 500 }; 501 502 vreg_l3h_0p91: ldo3 { 503 regulator-name = "vreg_l3h_0p91"; 504 regulator-min-microvolt = <912000>; 505 regulator-max-microvolt = <912000>; 506 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 507 }; 508 }; 509 510 regulators-3 { 511 compatible = "qcom,pmr735a-rpmh-regulators"; 512 qcom,pmic-id = "e"; 513 514 vdd-s1-supply = <&vph_pwr>; 515 vdd-s2-supply = <&vph_pwr>; 516 vdd-s3-supply = <&vph_pwr>; 517 518 vdd-l1-l2-supply = <&vreg_s2e_0p85>; 519 vdd-l3-supply = <&vreg_s1e_1p25>; 520 vdd-l4-supply = <&vreg_s1c_1p86>; 521 vdd-l5-l6-supply = <&vreg_s1c_1p86>; 522 vdd-l7-bob-supply = <&vreg_bob>; 523 524 vreg_s1e_1p25: smps1 { 525 regulator-name = "vreg_s1e_1p25"; 526 regulator-min-microvolt = <1200000>; 527 regulator-max-microvolt = <1296000>; 528 }; 529 530 vreg_s2e_0p85: smps2 { 531 regulator-name = "vreg_s2e_0p85"; 532 regulator-min-microvolt = <500000>; 533 regulator-max-microvolt = <1040000>; 534 }; 535 536 vreg_l1e_0p8: ldo1 { 537 regulator-name = "vreg_l1e_0p8"; 538 regulator-min-microvolt = <800000>; 539 regulator-max-microvolt = <800000>; 540 }; 541 542 vreg_l2e_0p8: ldo2 { 543 regulator-name = "vreg_l2e_0p8"; 544 regulator-min-microvolt = <800000>; 545 regulator-max-microvolt = <800000>; 546 }; 547 548 vreg_l3e_1p2: ldo3 { 549 regulator-name = "vreg_l3e_1p2"; 550 regulator-min-microvolt = <1200000>; 551 regulator-max-microvolt = <1200000>; 552 }; 553 554 vreg_l4e_1p7: ldo4 { 555 regulator-name = "vreg_l4e_1p7"; 556 regulator-min-microvolt = <1776000>; 557 regulator-max-microvolt = <1776000>; 558 }; 559 560 vreg_l5e_0p88: ldo5 { 561 regulator-name = "vreg_l5e_0p88"; 562 regulator-min-microvolt = <880000>; 563 regulator-max-microvolt = <880000>; 564 }; 565 566 vreg_l6e_1p2: ldo6 { 567 regulator-name = "vreg_l6e_1p2"; 568 regulator-min-microvolt = <1200000>; 569 regulator-max-microvolt = <1200000>; 570 }; 571 572 vreg_l7e_2p8: ldo7 { 573 regulator-name = "vreg_l7e_2p8"; 574 regulator-min-microvolt = <2800000>; 575 regulator-max-microvolt = <2800000>; 576 }; 577 }; 578}; 579 580&dispcc { 581 status = "okay"; 582}; 583 584&gpu { 585 status = "okay"; 586 587 zap-shader { 588 firmware-name = "qcom/sm8450/a730_zap.mbn"; 589 }; 590}; 591 592&i2c9 { 593 clock-frequency = <400000>; 594 status = "okay"; 595 596 lt9611_codec: hdmi-bridge@2b { 597 compatible = "lontium,lt9611uxc"; 598 reg = <0x2b>; 599 600 interrupts-extended = <&tlmm 44 IRQ_TYPE_EDGE_FALLING>; 601 602 reset-gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>; 603 604 vdd-supply = <<9611_1v2>; 605 vcc-supply = <<9611_3v3>; 606 607 pinctrl-names = "default"; 608 pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; 609 610 ports { 611 #address-cells = <1>; 612 #size-cells = <0>; 613 614 port@0 { 615 reg = <0>; 616 617 lt9611_a: endpoint { 618 remote-endpoint = <&mdss_dsi0_out>; 619 }; 620 }; 621 622 port@2 { 623 reg = <2>; 624 625 lt9611_out: endpoint { 626 remote-endpoint = <&hdmi_connector_out>; 627 }; 628 }; 629 }; 630 }; 631}; 632 633&i2c5 { 634 clock-frequency = <100000>; 635 636 status = "okay"; 637 638 typec-mux@42 { 639 compatible = "fcs,fsa4480"; 640 reg = <0x42>; 641 642 interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>; 643 644 vcc-supply = <&vreg_bob>; 645 mode-switch; 646 orientation-switch; 647 648 port { 649 fsa4480_sbu_mux: endpoint { 650 remote-endpoint = <&pmic_glink_sbu>; 651 }; 652 }; 653 }; 654}; 655 656&mdss { 657 status = "okay"; 658}; 659 660&mdss_dsi0 { 661 vdda-supply = <&vreg_l6b_1p2>; 662 status = "okay"; 663}; 664 665&mdss_dsi0_out { 666 remote-endpoint = <<9611_a>; 667 data-lanes = <0 1 2 3>; 668}; 669 670&mdss_dsi0_phy { 671 vdds-supply = <&vreg_l5b_0p88>; 672 status = "okay"; 673}; 674 675&mdss_dp0 { 676 status = "okay"; 677 678 ports { 679 port@1 { 680 reg = <1>; 681 682 mdss_dp0_out: endpoint { 683 data-lanes = <0 1>; 684 remote-endpoint = <&usb_1_qmpphy_dp_in>; 685 }; 686 }; 687 }; 688}; 689 690&pcie0 { 691 status = "okay"; 692 max-link-speed = <2>; 693}; 694 695&pcie0_phy { 696 status = "okay"; 697 vdda-phy-supply = <&vreg_l5b_0p88>; 698 vdda-pll-supply = <&vreg_l6b_1p2>; 699}; 700 701&pcie1 { 702 status = "okay"; 703}; 704 705&pcie1_phy { 706 status = "okay"; 707 vdda-phy-supply = <&vreg_l2h_0p91>; 708 vdda-pll-supply = <&vreg_l6b_1p2>; 709}; 710 711&pm8350_temp_alarm { 712 io-channels = <&pmk8350_vadc PM8350_ADC7_DIE_TEMP(1)>; 713 io-channel-names = "thermal"; 714}; 715 716&pm8350b_temp_alarm { 717 io-channels = <&pmk8350_vadc PM8350B_ADC7_DIE_TEMP>; 718 io-channel-names = "thermal"; 719}; 720 721&pmr735a_temp_alarm { 722 io-channels = <&pmk8350_vadc PMR735A_ADC7_DIE_TEMP>; 723 io-channel-names = "thermal"; 724}; 725 726&pmk8350_adc_tm { 727 status = "okay"; 728 729 xo-therm@0 { 730 reg = <0>; 731 io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; 732 qcom,ratiometric; 733 qcom,hw-settle-time-us = <200>; 734 }; 735 736 skin-msm-therm@1 { 737 reg = <1>; 738 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; 739 qcom,ratiometric; 740 qcom,hw-settle-time-us = <200>; 741 }; 742 743 camera-therm@2 { 744 reg = <2>; 745 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; 746 qcom,ratiometric; 747 qcom,hw-settle-time-us = <200>; 748 }; 749 750 therm1-therm@3 { 751 reg = <3>; 752 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; 753 qcom,ratiometric; 754 qcom,hw-settle-time-us = <200>; 755 }; 756 757 wide-rfc-therm@4 { 758 reg = <4>; 759 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; 760 qcom,ratiometric; 761 qcom,hw-settle-time-us = <200>; 762 }; 763 764 rear-tof-therm@5 { 765 reg = <5>; 766 io-channels = <&pmk8350_vadc PM8350_ADC7_AMUX_THM5_100K_PU(1)>; 767 qcom,ratiometric; 768 qcom,hw-settle-time-us = <200>; 769 }; 770 771 therm2-therm@6 { 772 reg = <6>; 773 io-channels = <&pmk8350_vadc PM8350_ADC7_GPIO3_100K_PU(1)>; 774 qcom,ratiometric; 775 qcom,hw-settle-time-us = <200>; 776 }; 777 778 usb-conn-therm@7 { 779 reg = <7>; 780 io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM5_100K_PU>; 781 qcom,ratiometric; 782 qcom,hw-settle-time-us = <200>; 783 }; 784}; 785 786&pmk8350_vadc { 787 status = "okay"; 788 789 channel@3 { 790 reg = <PMK8350_ADC7_DIE_TEMP>; 791 label = "pmk8350_die_temp"; 792 }; 793 794 channel@44 { 795 reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; 796 qcom,hw-settle-time = <200>; 797 qcom,ratiometric; 798 label = "pmk8350_xo_therm"; 799 }; 800 801 channel@103 { 802 reg = <PM8350_ADC7_DIE_TEMP(1)>; 803 label = "pm8350_die_temp"; 804 }; 805 806 channel@144 { 807 reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; 808 qcom,hw-settle-time = <200>; 809 qcom,ratiometric; 810 label = "skin_msm_temp"; 811 }; 812 813 channel@145 { 814 reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; 815 qcom,hw-settle-time = <200>; 816 qcom,ratiometric; 817 label = "camera_temp"; 818 }; 819 820 channel@146 { 821 reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; 822 qcom,hw-settle-time = <200>; 823 qcom,ratiometric; 824 label = "therm1_temp"; 825 }; 826 827 channel@147 { 828 reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; 829 qcom,hw-settle-time = <200>; 830 qcom,ratiometric; 831 label = "wide_rfc_temp"; 832 }; 833 834 channel@148 { 835 reg = <PM8350_ADC7_AMUX_THM5_100K_PU(1)>; 836 qcom,hw-settle-time = <200>; 837 qcom,ratiometric; 838 label = "rear_tof_temp"; 839 }; 840 841 channel@14c { 842 reg = <PM8350_ADC7_GPIO3_100K_PU(1)>; 843 qcom,hw-settle-time = <200>; 844 qcom,ratiometric; 845 label = "therm2_temp"; 846 }; 847 848 channel@303 { 849 reg = <PM8350B_ADC7_DIE_TEMP>; 850 label = "pm8350b_die_temp"; 851 }; 852 853 channel@348 { 854 reg = <PM8350B_ADC7_AMUX_THM5_100K_PU>; 855 qcom,hw-settle-time = <200>; 856 qcom,ratiometric; 857 label = "usb_conn_temp"; 858 }; 859 860 channel@403 { 861 reg = <PMR735A_ADC7_DIE_TEMP>; 862 label = "pmr735a_die_temp"; 863 }; 864 865 channel@44a { 866 reg = <PMR735A_ADC7_GPIO1_100K_PU>; 867 qcom,hw-settle-time = <200>; 868 qcom,ratiometric; 869 label = "qtm_w_temp"; 870 }; 871 872 channel@44b { 873 reg = <PMR735A_ADC7_GPIO2_100K_PU>; 874 qcom,hw-settle-time = <200>; 875 qcom,ratiometric; 876 label = "qtm_n_temp"; 877 }; 878}; 879 880&remoteproc_adsp { 881 status = "okay"; 882 firmware-name = "qcom/sm8450/adsp.mbn"; 883}; 884 885&remoteproc_cdsp { 886 status = "okay"; 887 firmware-name = "qcom/sm8450/cdsp.mbn"; 888}; 889 890&remoteproc_mpss { 891 status = "okay"; 892 firmware-name = "qcom/sm8450/modem.mbn"; 893}; 894 895&remoteproc_slpi { 896 status = "okay"; 897 firmware-name = "qcom/sm8450/slpi.mbn"; 898}; 899 900&qupv3_id_0 { 901 status = "okay"; 902}; 903 904&qupv3_id_1 { 905 status = "okay"; 906}; 907 908&sdhc_2 { 909 cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>; 910 pinctrl-names = "default", "sleep"; 911 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; 912 pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; 913 vmmc-supply = <&vreg_l9c_2p96>; 914 vqmmc-supply = <&vreg_l6c_1p8>; 915 no-sdio; 916 no-mmc; 917 status = "okay"; 918}; 919 920&sound { 921 compatible = "qcom,sm8450-sndcard"; 922 model = "SM8450-HDK"; 923 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", 924 "SpkrRight IN", "WSA_SPK2 OUT", 925 "IN1_HPHL", "HPHL_OUT", 926 "IN2_HPHR", "HPHR_OUT", 927 "AMIC1", "MIC BIAS1", 928 "AMIC2", "MIC BIAS2", 929 "AMIC3", "MIC BIAS3", 930 "AMIC4", "MIC BIAS3", 931 "AMIC5", "MIC BIAS4", 932 "VA DMIC0", "MIC BIAS3", 933 "VA DMIC1", "MIC BIAS3", 934 "VA DMIC2", "MIC BIAS1", 935 "VA DMIC3", "MIC BIAS1", 936 "TX DMIC0", "MIC BIAS3", 937 "TX DMIC1", "MIC BIAS3", 938 "TX DMIC2", "MIC BIAS1", 939 "TX DMIC3", "MIC BIAS1", 940 "TX SWR_INPUT0", "ADC1_OUTPUT", 941 "TX SWR_INPUT1", "ADC2_OUTPUT", 942 "TX SWR_INPUT0", "ADC3_OUTPUT", 943 "TX SWR_INPUT1", "ADC4_OUTPUT"; 944 945 wcd-playback-dai-link { 946 link-name = "WCD Playback"; 947 948 cpu { 949 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; 950 }; 951 952 codec { 953 sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; 954 }; 955 956 platform { 957 sound-dai = <&q6apm>; 958 }; 959 }; 960 961 wcd-capture-dai-link { 962 link-name = "WCD Capture"; 963 964 cpu { 965 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 966 }; 967 968 codec { 969 sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; 970 }; 971 972 platform { 973 sound-dai = <&q6apm>; 974 }; 975 }; 976 977 wsa-dai-link { 978 link-name = "WSA Playback"; 979 980 cpu { 981 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; 982 }; 983 984 codec { 985 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; 986 }; 987 988 platform { 989 sound-dai = <&q6apm>; 990 }; 991 }; 992 993 va-dai-link { 994 link-name = "VA Capture"; 995 996 cpu { 997 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; 998 }; 999 1000 codec { 1001 sound-dai = <&vamacro 0>; 1002 }; 1003 1004 platform { 1005 sound-dai = <&q6apm>; 1006 }; 1007 }; 1008}; 1009 1010&swr0 { 1011 status = "okay"; 1012 1013 left_spkr: speaker@0,1 { 1014 compatible = "sdw10217020200"; 1015 reg = <0 1>; 1016 pinctrl-names = "default"; 1017 pinctrl-0 = <&spkr_1_sd_n_active>; 1018 powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; 1019 #sound-dai-cells = <0>; 1020 sound-name-prefix = "SpkrLeft"; 1021 #thermal-sensor-cells = <0>; 1022 vdd-supply = <&vreg_s10b_1p8>; 1023 }; 1024 1025 right_spkr: speaker@0,2 { 1026 compatible = "sdw10217020200"; 1027 reg = <0 2>; 1028 pinctrl-names = "default"; 1029 pinctrl-0 = <&spkr_2_sd_n_active>; 1030 powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; 1031 #sound-dai-cells = <0>; 1032 sound-name-prefix = "SpkrRight"; 1033 #thermal-sensor-cells = <0>; 1034 vdd-supply = <&vreg_s10b_1p8>; 1035 }; 1036}; 1037 1038&swr1 { 1039 status = "okay"; 1040 1041 wcd_rx: codec@0,4 { 1042 compatible = "sdw20217010d00"; 1043 reg = <0 4>; 1044 qcom,rx-port-mapping = <1 2 3 4 5>; 1045 }; 1046}; 1047 1048&swr2 { 1049 status = "okay"; 1050 1051 wcd_tx: codec@0,3 { 1052 compatible = "sdw20217010d00"; 1053 reg = <0 3>; 1054 qcom,tx-port-mapping = <1 1 2 3>; 1055 }; 1056}; 1057 1058&tlmm { 1059 gpio-reserved-ranges = <28 4>, <36 4>; 1060 1061 lt9611_irq_pin: lt9611-irq-state { 1062 pins = "gpio44"; 1063 function = "gpio"; 1064 bias-disable; 1065 }; 1066 1067 lt9611_rst_pin: lt9611-rst-state { 1068 pins = "gpio107"; 1069 function = "gpio"; 1070 output-high; 1071 }; 1072 1073 sdc2_card_det_n: sd-card-det-n-state { 1074 pins = "gpio92"; 1075 function = "gpio"; 1076 drive-strength = <2>; 1077 bias-pull-up; 1078 }; 1079}; 1080 1081&uart7 { 1082 status = "okay"; 1083}; 1084 1085&ufs_mem_hc { 1086 status = "okay"; 1087 1088 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; 1089 1090 vcc-supply = <&vreg_l7b_2p5>; 1091 vcc-max-microamp = <1100000>; 1092 vccq-supply = <&vreg_l9b_1p2>; 1093 vccq-max-microamp = <1200000>; 1094 vdd-hba-supply = <&vreg_l9b_1p2>; 1095}; 1096 1097&ufs_mem_phy { 1098 status = "okay"; 1099 1100 vdda-phy-supply = <&vreg_l5b_0p88>; 1101 vdda-pll-supply = <&vreg_l6b_1p2>; 1102}; 1103 1104&usb_1 { 1105 status = "okay"; 1106}; 1107 1108&usb_1_dwc3 { 1109 dr_mode = "otg"; 1110 usb-role-switch; 1111}; 1112 1113&usb_1_dwc3_hs { 1114 remote-endpoint = <&pmic_glink_hs_in>; 1115}; 1116 1117&usb_1_dwc3_ss { 1118 remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; 1119}; 1120 1121&usb_1_hsphy { 1122 status = "okay"; 1123 1124 vdda-pll-supply = <&vreg_l5b_0p88>; 1125 vdda18-supply = <&vreg_l1c_1p8>; 1126 vdda33-supply = <&vreg_l2b_3p07>; 1127}; 1128 1129&usb_1_qmpphy { 1130 status = "okay"; 1131 1132 vdda-phy-supply = <&vreg_l6b_1p2>; 1133 vdda-pll-supply = <&vreg_l1b_0p91>; 1134 1135 orientation-switch; 1136}; 1137 1138&usb_1_qmpphy_dp_in { 1139 remote-endpoint = <&mdss_dp0_out>; 1140}; 1141 1142&usb_1_qmpphy_out { 1143 remote-endpoint = <&pmic_glink_ss_in>; 1144}; 1145 1146&usb_1_qmpphy_usb_ss_in { 1147 remote-endpoint = <&usb_1_dwc3_ss>; 1148}; 1149 1150&vamacro { 1151 pinctrl-0 = <&dmic01_default>, <&dmic23_default>; 1152 pinctrl-names = "default"; 1153 vdd-micb-supply = <&vreg_s10b_1p8>; 1154 qcom,dmic-sample-rate = <600000>; 1155 1156 status = "okay"; 1157}; 1158 1159&tlmm { 1160 spkr_1_sd_n_active: spkr-1-sd-n-active-state { 1161 pins = "gpio1"; 1162 function = "gpio"; 1163 drive-strength = <16>; 1164 bias-disable; 1165 output-low; 1166 }; 1167 1168 spkr_2_sd_n_active: spkr-2-sd-n-active-state { 1169 pins = "gpio89"; 1170 function = "gpio"; 1171 drive-strength = <16>; 1172 bias-disable; 1173 output-low; 1174 }; 1175 1176 wcd_default: wcd-reset-n-active-state { 1177 pins = "gpio43"; 1178 function = "gpio"; 1179 drive-strength = <16>; 1180 bias-disable; 1181 output-low; 1182 }; 1183}; 1184