1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> 4 */ 5 6/dts-v1/; 7 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> 10#include <dt-bindings/regulator/qcom,rpmh-regulator.h> 11#include "sm8150.dtsi" 12#include "pm8150.dtsi" 13#include "pm8150b.dtsi" 14#include "pm8150l.dtsi" 15 16/delete-node/ &cdsp_mem; 17/delete-node/ &gpu_mem; 18/delete-node/ &ipa_fw_mem; 19/delete-node/ &ipa_gsi_mem; 20/delete-node/ &mpss_mem; 21/delete-node/ &slpi_mem; 22/delete-node/ &spss_mem; 23/delete-node/ &venus_mem; 24 25/ { 26 qcom,msm-id = <339 0x20000>; /* SM8150 v2 */ 27 qcom,board-id = <8 0>; 28 29 chosen { 30 #address-cells = <2>; 31 #size-cells = <2>; 32 ranges; 33 34 framebuffer: framebuffer@9c000000 { 35 compatible = "simple-framebuffer"; 36 reg = <0 0x9c000000 0 0x2300000>; 37 /* Griffin BL initializes in 2.5k mode, not 4k */ 38 width = <1096>; 39 height = <2560>; 40 stride = <(1096 * 4)>; 41 format = "a8r8g8b8"; 42 /* 43 * That's (going to be) a lot of clocks, but it's necessary due 44 * to unused clk cleanup & no panel driver yet (& no dispcc either).. 45 */ 46 clocks = <&gcc GCC_DISP_HF_AXI_CLK>, 47 <&gcc GCC_DISP_SF_AXI_CLK>; 48 }; 49 }; 50 51 gpio-keys { 52 compatible = "gpio-keys"; 53 54 pinctrl-names = "default"; 55 pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; 56 57 key-camera-focus { 58 label = "Camera Focus"; 59 linux,code = <KEY_CAMERA_FOCUS>; 60 gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>; 61 debounce-interval = <15>; 62 linux,can-disable; 63 wakeup-source; 64 }; 65 66 key-camera-snapshot { 67 label = "Camera Snapshot"; 68 linux,code = <KEY_CAMERA>; 69 gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>; 70 debounce-interval = <15>; 71 linux,can-disable; 72 wakeup-source; 73 }; 74 75 key-vol-down { 76 label = "Volume Down"; 77 linux,code = <KEY_VOLUMEDOWN>; 78 gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; 79 debounce-interval = <15>; 80 linux,can-disable; 81 wakeup-source; 82 }; 83 }; 84 85 cam0_vdig_vreg: cam0-vdig-regulator { 86 compatible = "regulator-fixed"; 87 regulator-name = "camera0_vdig_vreg"; 88 gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>; 89 enable-active-high; 90 91 pinctrl-0 = <&main_cam_pwr_en>; 92 pinctrl-names = "default"; 93 }; 94 95 cam1_vdig_vreg: cam1-vdig-regulator { 96 compatible = "regulator-fixed"; 97 regulator-name = "camera1_vdig_vreg"; 98 gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>; 99 enable-active-high; 100 101 pinctrl-0 = <&sub_cam_pwr_en>; 102 pinctrl-names = "default"; 103 }; 104 105 cam2_vdig_vreg: cam2-vdig-regulator { 106 compatible = "regulator-fixed"; 107 regulator-name = "camera2_vdig_vreg"; 108 gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; 109 enable-active-high; 110 111 pinctrl-0 = <&chat_cam_pwr_en>; 112 pinctrl-names = "default"; 113 }; 114 115 cam3_vdig_vreg: cam3-vdig-regulator { 116 compatible = "regulator-fixed"; 117 regulator-name = "camera3_vdig_vreg"; 118 gpio = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; 119 enable-active-high; 120 121 pinctrl-0 = <&supwc_pwr_en>; 122 pinctrl-names = "default"; 123 }; 124 125 cam_vmdr_vreg: cam-vmdr-regulator { 126 compatible = "regulator-fixed"; 127 regulator-name = "camera_vmdr_vreg"; 128 gpio = <&pm8150l_gpios 3 GPIO_ACTIVE_HIGH>; 129 enable-active-high; 130 131 pinctrl-0 = <&main_cam_pwr_vmdr_en>; 132 pinctrl-names = "default"; 133 }; 134 135 rgbcir_vreg: rgbcir-regulator { 136 compatible = "regulator-fixed"; 137 regulator-name = "rgbcir_vreg"; 138 gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>; 139 enable-active-high; 140 141 pinctrl-0 = <&rgbc_ir_pwr_en>; 142 pinctrl-names = "default"; 143 }; 144 145 vph_pwr: vph-pwr-regulator { 146 compatible = "regulator-fixed"; 147 regulator-name = "vph_pwr"; 148 regulator-min-microvolt = <3700000>; 149 regulator-max-microvolt = <3700000>; 150 }; 151 152 /* 153 * Apparently RPMh does not provide support for PM8150 S4 because it 154 * is always-on; model it as a fixed regulator. 155 */ 156 vreg_s4a_1p8: pm8150-s4 { 157 compatible = "regulator-fixed"; 158 regulator-name = "vreg_s4a_1p8"; 159 160 regulator-min-microvolt = <1800000>; 161 regulator-max-microvolt = <1800000>; 162 163 regulator-always-on; 164 regulator-boot-on; 165 166 vin-supply = <&vph_pwr>; 167 }; 168 169 reserved-memory { 170 mpss_mem: memory@8dc00000 { 171 reg = <0x0 0x8dc00000 0x0 0x9600000>; 172 no-map; 173 }; 174 175 venus_mem: memory@97200000 { 176 reg = <0x0 0x97200000 0x0 0x500000>; 177 no-map; 178 }; 179 180 slpi_mem: memory@97700000 { 181 reg = <0x0 0x97700000 0x0 0x1400000>; 182 no-map; 183 }; 184 185 ipa_fw_mem: memory@98b00000 { 186 reg = <0x0 0x98b00000 0x0 0x10000>; 187 no-map; 188 }; 189 190 ipa_gsi_mem: memory@98b10000 { 191 reg = <0x0 0x98b10000 0x0 0x5000>; 192 no-map; 193 }; 194 195 gpu_mem: memory@98b15000 { 196 reg = <0x0 0x98b15000 0x0 0x2000>; 197 no-map; 198 }; 199 200 spss_mem: memory@98c00000 { 201 reg = <0x0 0x98c00000 0x0 0x100000>; 202 no-map; 203 }; 204 205 cdsp_mem: memory@98d00000 { 206 reg = <0x0 0x98d00000 0x0 0x1400000>; 207 no-map; 208 }; 209 210 cont_splash_mem: memory@9c000000 { 211 reg = <0x0 0x9c000000 0x0 0x2400000>; 212 no-map; 213 }; 214 215 cdsp_sec_mem: memory@a4c00000 { 216 reg = <0x0 0xa4c00000 0x0 0x3c00000>; 217 no-map; 218 }; 219 220 ramoops@ffc00000 { 221 compatible = "ramoops"; 222 reg = <0x0 0xffc00000 0x0 0x100000>; 223 record-size = <0x1000>; 224 console-size = <0x40000>; 225 pmsg-size = <0x20000>; 226 ecc-size = <16>; 227 no-map; 228 }; 229 }; 230}; 231 232&adsp_mem { 233 reg = <0x0 0x8be00000 0x0 0x1e00000>; 234}; 235 236&apps_rsc { 237 regulators-0 { 238 compatible = "qcom,pm8150-rpmh-regulators"; 239 qcom,pmic-id = "a"; 240 241 vdd-s1-supply = <&vph_pwr>; 242 vdd-s2-supply = <&vph_pwr>; 243 vdd-s3-supply = <&vph_pwr>; 244 vdd-s4-supply = <&vph_pwr>; 245 vdd-s5-supply = <&vph_pwr>; 246 vdd-s6-supply = <&vph_pwr>; 247 vdd-s7-supply = <&vph_pwr>; 248 vdd-s8-supply = <&vph_pwr>; 249 vdd-s9-supply = <&vph_pwr>; 250 vdd-s10-supply = <&vph_pwr>; 251 252 vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; 253 vdd-l2-l10-supply = <&vreg_bob>; 254 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>; 255 vdd-l6-l9-supply = <&vreg_s8c_1p3>; 256 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; 257 vdd-l13-l16-l17-supply = <&vreg_bob>; 258 259 vreg_s2a_0p6: smps2 { 260 regulator-min-microvolt = <600000>; 261 regulator-max-microvolt = <600000>; 262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 263 }; 264 265 vreg_s5a_1p9: smps5 { 266 regulator-min-microvolt = <1904000>; 267 regulator-max-microvolt = <2040000>; 268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 269 }; 270 271 vreg_s6a_0p9: smps6 { 272 regulator-min-microvolt = <920000>; 273 regulator-max-microvolt = <1128000>; 274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 275 }; 276 277 vreg_l1a_0p75: ldo1 { 278 regulator-min-microvolt = <752000>; 279 regulator-max-microvolt = <752000>; 280 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 281 }; 282 283 vreg_l2a_3p1: ldo2 { 284 regulator-min-microvolt = <3072000>; 285 regulator-max-microvolt = <3072000>; 286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 287 }; 288 289 vreg_l3a_0p8: ldo3 { 290 regulator-min-microvolt = <480000>; 291 regulator-max-microvolt = <932000>; 292 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 293 }; 294 295 vreg_l5a_0p875: ldo5 { 296 regulator-min-microvolt = <880000>; 297 regulator-max-microvolt = <880000>; 298 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 299 }; 300 301 vreg_l6a_1p2: ldo6 { 302 regulator-min-microvolt = <1200000>; 303 regulator-max-microvolt = <1200000>; 304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 305 }; 306 307 vreg_l7a_1p8: ldo7 { 308 regulator-min-microvolt = <1800000>; 309 regulator-max-microvolt = <1800000>; 310 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 311 }; 312 313 vreg_l9a_1p2: ldo9 { 314 regulator-min-microvolt = <1200000>; 315 regulator-max-microvolt = <1200000>; 316 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 317 }; 318 319 vreg_l10a_2p5: ldo10 { 320 regulator-min-microvolt = <2504000>; 321 regulator-max-microvolt = <2960000>; 322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 323 }; 324 325 vreg_l11a_0p8: ldo11 { 326 regulator-min-microvolt = <800000>; 327 regulator-max-microvolt = <800000>; 328 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 329 }; 330 331 vreg_l12a_1p8: ldo12 { 332 regulator-min-microvolt = <1800000>; 333 regulator-max-microvolt = <1800000>; 334 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 335 }; 336 337 /* L13 is unused. */ 338 339 vreg_l14a_1p8: ldo14 { 340 regulator-min-microvolt = <1800000>; 341 regulator-max-microvolt = <1800000>; 342 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 343 }; 344 345 vreg_l15a_1p7: ldo15 { 346 regulator-min-microvolt = <1704000>; 347 regulator-max-microvolt = <1704000>; 348 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 349 }; 350 351 vreg_l16a_2p7: ldo16 { 352 regulator-min-microvolt = <2704000>; 353 regulator-max-microvolt = <2960000>; 354 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 355 }; 356 357 vreg_l17a_3p0: ldo17 { 358 regulator-min-microvolt = <2856000>; 359 regulator-max-microvolt = <3008000>; 360 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 361 }; 362 363 vreg_l18a_0p8: ldo18 { 364 regulator-min-microvolt = <880000>; 365 regulator-max-microvolt = <912000>; 366 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 367 }; 368 }; 369 370 regulators-1 { 371 compatible = "qcom,pm8150l-rpmh-regulators"; 372 qcom,pmic-id = "c"; 373 374 vdd-s1-supply = <&vph_pwr>; 375 vdd-s2-supply = <&vph_pwr>; 376 vdd-s3-supply = <&vph_pwr>; 377 vdd-s4-supply = <&vph_pwr>; 378 vdd-s5-supply = <&vph_pwr>; 379 vdd-s6-supply = <&vph_pwr>; 380 vdd-s7-supply = <&vph_pwr>; 381 vdd-s8-supply = <&vph_pwr>; 382 383 vdd-l1-l8-supply = <&vreg_s4a_1p8>; 384 vdd-l2-l3-supply = <&vreg_s8c_1p3>; 385 vdd-l4-l5-l6-supply = <&vreg_bob>; 386 vdd-l7-l11-supply = <&vreg_bob>; 387 vdd-l9-l10-supply = <&vreg_bob>; 388 389 vdd-bob-supply = <&vph_pwr>; 390 vdd-flash-supply = <&vreg_bob>; 391 vdd-rgb-supply = <&vreg_bob>; 392 393 vreg_bob: bob { 394 regulator-min-microvolt = <3350000>; 395 regulator-max-microvolt = <4000000>; 396 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; 397 regulator-allow-bypass; 398 }; 399 400 vreg_s1c_1p1: smps1 { 401 regulator-min-microvolt = <1128000>; 402 regulator-max-microvolt = <1128000>; 403 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 404 }; 405 406 vreg_s8c_1p3: smps8 { 407 regulator-min-microvolt = <1352000>; 408 regulator-max-microvolt = <1352000>; 409 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 410 }; 411 412 vreg_l1c_1p8: ldo1 { 413 regulator-min-microvolt = <1800000>; 414 regulator-max-microvolt = <1800000>; 415 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 416 }; 417 418 vreg_l2c_1p3: ldo2 { 419 regulator-min-microvolt = <1304000>; 420 regulator-max-microvolt = <1304000>; 421 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 422 }; 423 424 vreg_l3c_1p2: ldo3 { 425 regulator-min-microvolt = <1200000>; 426 regulator-max-microvolt = <1200000>; 427 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 428 }; 429 430 vreg_l4c_1p8: ldo4 { 431 regulator-min-microvolt = <1704000>; 432 regulator-max-microvolt = <2928000>; 433 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 434 }; 435 436 vreg_l5c_1p8: ldo5 { 437 regulator-min-microvolt = <1704000>; 438 regulator-max-microvolt = <2928000>; 439 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 440 }; 441 442 vreg_l6c_2p9: ldo6 { 443 regulator-min-microvolt = <1800000>; 444 regulator-max-microvolt = <2960000>; 445 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 446 regulator-allow-set-load; 447 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 448 RPMH_REGULATOR_MODE_HPM>; 449 }; 450 451 vreg_l7c_3p0: ldo7 { 452 regulator-min-microvolt = <2856000>; 453 regulator-max-microvolt = <3104000>; 454 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 455 }; 456 457 vreg_l8c_1p8: ldo8 { 458 regulator-min-microvolt = <1800000>; 459 regulator-max-microvolt = <1800000>; 460 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 461 }; 462 463 vreg_l9c_2p9: ldo9 { 464 regulator-min-microvolt = <2704000>; 465 regulator-max-microvolt = <2960000>; 466 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 467 regulator-allow-set-load; 468 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM 469 RPMH_REGULATOR_MODE_HPM>; 470 }; 471 472 vreg_l10c_3p3: ldo10 { 473 regulator-min-microvolt = <3000000>; 474 regulator-max-microvolt = <3312000>; 475 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 476 }; 477 478 vreg_l11c_3p3: ldo11 { 479 regulator-min-microvolt = <3000000>; 480 regulator-max-microvolt = <3312000>; 481 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; 482 }; 483 }; 484 485 /* PM8009 is not present on these boards, even if downstream sources suggest so. */ 486}; 487 488&i2c4 { 489 status = "okay"; 490 491 /* Qcom SMB1355 @ c */ 492 /* Qcom SMB1390 @ 10 */ 493 /* Qcom FSA4480 USB-C audio switch @ 43 */ 494 495 nfc@28 { 496 compatible = "nxp,nxp-nci-i2c"; 497 reg = <0x28>; 498 499 interrupt-parent = <&tlmm>; 500 interrupts = <47 IRQ_TYPE_EDGE_RISING>; 501 502 enable-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; 503 firmware-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; 504 }; 505}; 506 507&i2c7 { 508 status = "okay"; 509 510 /* AMS TCS3490 RGB+IR color sensor @ 72 */ 511}; 512 513&i2c10 { 514 status = "okay"; 515 516 /* Samsung touchscreen @ 48 */ 517}; 518 519&pm8150_gpios { 520 gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ 521 "", 522 "NC", 523 "NC", 524 "", 525 "NC", 526 "SUPWC_PWR_EN", 527 "", 528 "NC", 529 "NC"; /* GPIO_10 */ 530 531 vol_down_n: vol-down-n-state { 532 pins = "gpio1"; 533 function = "normal"; 534 power-source = <0>; 535 bias-pull-up; 536 input-enable; 537 }; 538 539 supwc_pwr_en: supwc-pwr-en-state { 540 pins = "gpio7"; 541 function = "normal"; 542 qcom,drive-strength = <1>; 543 power-source = <1>; 544 drive-push-pull; 545 output-low; 546 }; 547}; 548 549&pm8150b_gpios { 550 gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ 551 "FOCUS_N", 552 "NC", 553 "NC", 554 "RF_LCD_ID_EN", 555 "NC", 556 "TS_VDDH_EN", 557 "LCD_ID", 558 "", 559 "NC", /* GPIO_10 */ 560 "NC", 561 "RF_ID"; 562 563 snapshot_n: snapshot-n-state { 564 pins = "gpio1"; 565 function = "normal"; 566 power-source = <0>; 567 bias-pull-up; 568 input-enable; 569 }; 570 571 focus_n: focus-n-state { 572 pins = "gpio2"; 573 function = "normal"; 574 power-source = <0>; 575 bias-pull-up; 576 input-enable; 577 }; 578}; 579 580&pm8150l_gpios { 581 gpio-line-names = "TS_VDDIO_EN", /* GPIO_1 */ 582 "NC", 583 "MAIN_CAM_PWR_VMDR_EN", 584 "NC", 585 "", 586 "NC", 587 "NC", 588 "FP_LDO_EN", 589 "NC", 590 "NC", /* GPIO_10 */ 591 "NC", 592 "NC"; 593 594 main_cam_pwr_vmdr_en: main-cam-pwr-vmdr-en-state { 595 pins = "gpio3"; 596 function = "normal"; 597 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; 598 power-source = <0>; 599 drive-push-pull; 600 output-low; 601 }; 602}; 603 604&pon_pwrkey { 605 status = "okay"; 606}; 607 608&pon_resin { 609 linux,code = <KEY_VOLUMEUP>; 610 status = "okay"; 611}; 612 613&qupv3_id_0 { 614 status = "okay"; 615}; 616 617&qupv3_id_1 { 618 status = "okay"; 619}; 620 621&sdhc_2 { 622 vmmc-supply = <&vreg_l9c_2p9>; 623 vqmmc-supply = <&vreg_l6c_2p9>; 624 cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; 625 bus-width = <4>; 626 no-sdio; 627 no-mmc; 628 629 status = "okay"; 630}; 631 632&tlmm { 633 gpio-reserved-ranges = <126 4>; 634 gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */ 635 "NFC_ESE_SPI_MOSI", 636 "NFC_ESE_SPI_SCLK", 637 "NFC_ESE_SPI_CS_N", 638 "NC", 639 "NC", 640 "DISP_RESET_N", 641 "DEBUG_GPIO0", 642 "MDP_VSYNC_P", 643 "TS_I2C_SDA", 644 "TS_I2C_SCL", /* GPIO_10 */ 645 "CAM_SOF", 646 "CAM2_RST_N", 647 "CAM_MCLK0", 648 "CAM_MCLK1", 649 "CAM_MCLK2", 650 "CAM_MCLK3", 651 "CCI_I2C_SDA0", 652 "CCI_I2C_SCL0", 653 "CCI_I2C_SDA1", 654 "CCI_I2C_SCL1", /* GPIO_20 */ 655 "NC", 656 "MAIN_CAM_PWR_EN", 657 "CAM3_RST_N", 658 "NC", 659 "CHAT_CAM_PWR_EN", 660 "NC", 661 "NC", 662 "CAM0_RST_N", 663 "RGBC_IR_PWR_EN", 664 "CAM1_RST_N", /* GPIO_30 */ 665 "CCI_I2C_SDA2", 666 "CCI_I2C_SCL2", 667 "CCI_I2C_SDA3", 668 "CCI_I2C_SCL3", 669 "NC", 670 "DEBUG_GPIO1", 671 "RGBC_IR_INT", 672 "USB_CC_DIR", 673 "NC", 674 "NC", /* GPIO_40 */ 675 "NFC_EN", 676 "NFC_ESE_PWR_REQ", 677 "BT_HCI_UART_CTS_N", 678 "BT_HCI_UART_RFR_N", 679 "BT_HCI_UART_TXD", 680 "BT_HCI_UART_RXD", 681 "NFC_IRQ", 682 "NFC_DWL_REQ", 683 "UIM2_DETECT_EN", 684 "WLAN_SW_CTRL", /* GPIO_50 */ 685 "APPS_I2C_SDA", 686 "APPS_I2C_SCL", 687 "NC", 688 "TS_RESET_N", 689 "NC", 690 "NC", 691 "NC", 692 "NC", 693 "HW_ID_0", 694 "NC", /* GPIO_60 */ 695 "QLINK_REQUEST", 696 "QLINK_ENABLE", 697 "WMSS_RESET_N", 698 "SDM_GRFC_8", 699 "WDOG_DISABLE", 700 "NC", 701 "NC", 702 "PA_INDICATOR_OR", 703 "MSS_LTE_COXM_TXD", 704 "MSS_LTE_COXM_RXD", /* GPIO_70 */ 705 "SDM_RFFE0_DATA", 706 "SDM_RFFE0_CLK", 707 "SDM_RFFE1_DATA", 708 "SDM_RFFE1_CLK", 709 "SDM_RFFE2_DATA", 710 "SDM_RFFE2_CLK", 711 "SDM_RFFE3_DATA", 712 "SDM_RFFE3_CLK", 713 "SUB_CAM_PWR_EN", 714 "FP_RESET_N", /* GPIO_80 */ 715 "NC", 716 "NC", 717 "NC", 718 "NC", 719 "DEBUG_UART_TX", 720 "DEBUG_UART_RX", 721 "DVDT_WRT_DET_AND", 722 "NC", 723 "NC", 724 "NC", /* GPIO_90 */ 725 "NC", 726 "NC", 727 "NC", 728 "NC", 729 "UDON_SWITCH_SEL", 730 "SD_CARD_DET_N", 731 "NC", 732 "CAMSENSOR_I2C_SDA", 733 "CAMSENSOR_I2C_SCL", 734 "USB_AUDIO_EN1", /* GPIO_100 */ 735 "DISP_ERR_FG", 736 "NC", 737 "NC", 738 "NC", 739 "UIM2_DATA", 740 "UIM2_CLK", 741 "UIM2_RESET", 742 "UIM2_DET", 743 "UIM1_DATA", 744 "UIM1_CLK", /* GPIO_110 */ 745 "UIM1_RESET", 746 "UIM1_PRESENT", 747 "NFC_CLK_REQ", 748 "SW_SERVICE", 749 "NC", 750 "RF_ID_EXTENSION", 751 "ALS_PROX_INT_N", 752 "FP_INT", 753 "DVDT_WRT_DET_OR", 754 "BAROMETER_INT", /* GPIO_120 */ 755 "ACC_COVER_OPEN", 756 "TS_INT_N", 757 "CODEC_INT1_N", 758 "CODEC_INT2_N", 759 "TX_GTR_THRES_IN", 760 "FP_SPI_MISO", 761 "FP_SPI_MOSI", 762 "FP_SPI_SCLK", 763 "FP_SPI_CS_N", 764 "NC", /* GPIO_130 */ 765 "DVDT_ENABLE", 766 "ACCEL_INT", 767 "NC", 768 "MAG_INT_N", 769 "NC", 770 "FORCED_USB_BOOT", 771 "NC", 772 "NC", 773 "HW_ID_1", 774 "NC", /* GPIO_140 */ 775 "NC", 776 "NC", 777 "CODEC_RST_N", 778 "CDC_SPI_MISO", 779 "CDC_SPI_MOSI", 780 "CDC_SPI_SCLK", 781 "CDC_SPI_CS_N", 782 "NC", 783 "LPASS_SLIMBUS_CLK", 784 "LPASS_SLIMBUS_DATA0", /* GPIO_150 */ 785 "LPASS_SLIMBUS_DATA1", 786 "USB_AUDIO_EN2", 787 "BT_FM_SLIMBUS_DATA", 788 "BT_FM_SLIMBUS_CLK", 789 "COMPASS_I2C_SDA", 790 "COMPASS_I2C_SCL", 791 "SSC_SPI_1_MISO", 792 "SSC_SPI_1_MOSI", 793 "SSC_SPI_1_CLK", 794 "SSC_SPI_1_CS_N", /* GPIO_160 */ 795 "SSC_SENSOR_I2C_SDA", 796 "SSC_SENSOR_I2C_SCL", 797 "NC", 798 "NC", 799 "NC", 800 "NC", 801 "SSC_UART_1_TX", 802 "SSC_UART_1_RX", 803 "WL_CMD_CLK_CHAIN0", 804 "WL_CMD_DATA_CHAIN0", /* GPIO_170 */ 805 "WL_CMD_CLK_CHAIN1", 806 "WL_CMD_DATA_CHAIN1", 807 "WL_BT_COEX_CLK", 808 "WL_BT_COEX_DATA"; 809 810 main_cam_pwr_en: main-cam-pwr-en-state { 811 pins = "gpio22"; 812 function = "gpio"; 813 drive-strength = <2>; 814 bias-disable; 815 output-low; 816 }; 817 818 chat_cam_pwr_en: chat-cam-pwr-en-state { 819 pins = "gpio25"; 820 function = "gpio"; 821 drive-strength = <2>; 822 bias-disable; 823 output-low; 824 }; 825 826 rgbc_ir_pwr_en: rgbc-ir-pwr-en-state { 827 pins = "gpio29"; 828 function = "gpio"; 829 drive-strength = <2>; 830 bias-disable; 831 output-low; 832 }; 833 834 sub_cam_pwr_en: sub-cam-pwr-en-state { 835 pins = "gpio79"; 836 function = "gpio"; 837 drive-strength = <2>; 838 bias-pull-down; 839 }; 840}; 841 842&uart2 { 843 status = "okay"; 844}; 845 846/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ 847&ufs_mem_hc { status = "disabled"; }; 848&ufs_mem_phy { status = "disabled"; }; 849 850&usb_1 { 851 status = "okay"; 852}; 853 854&usb_1_dwc3 { 855 dr_mode = "peripheral"; 856}; 857 858&usb_1_hsphy { 859 status = "okay"; 860 vdda-pll-supply = <&vreg_l5a_0p875>; 861 vdda33-supply = <&vreg_l2a_3p1>; 862 vdda18-supply = <&vreg_l12a_1p8>; 863}; 864 865&usb_1_qmpphy { 866 status = "okay"; 867 vdda-phy-supply = <&vreg_l3c_1p2>; 868 vdda-pll-supply = <&vreg_l18a_0p8>; 869}; 870