1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org> 4 */ 5 6#include <dt-bindings/clock/qcom,rpmcc.h> 7#include <dt-bindings/clock/qcom,sm6375-gcc.h> 8#include <dt-bindings/clock/qcom,sm6375-gpucc.h> 9#include <dt-bindings/dma/qcom-gpi.h> 10#include <dt-bindings/firmware/qcom,scm.h> 11#include <dt-bindings/interconnect/qcom,osm-l3.h> 12#include <dt-bindings/interrupt-controller/arm-gic.h> 13#include <dt-bindings/mailbox/qcom-ipcc.h> 14#include <dt-bindings/power/qcom-rpmpd.h> 15 16/ { 17 interrupt-parent = <&intc>; 18 19 #address-cells = <2>; 20 #size-cells = <2>; 21 22 chosen { }; 23 24 clocks { 25 xo_board_clk: xo-board-clk { 26 compatible = "fixed-clock"; 27 #clock-cells = <0>; 28 }; 29 30 sleep_clk: sleep-clk { 31 compatible = "fixed-clock"; 32 clock-frequency = <32000>; 33 #clock-cells = <0>; 34 }; 35 }; 36 37 cpus { 38 #address-cells = <2>; 39 #size-cells = <0>; 40 41 CPU0: cpu@0 { 42 device_type = "cpu"; 43 compatible = "qcom,kryo660"; 44 reg = <0x0 0x0>; 45 clocks = <&cpufreq_hw 0>; 46 enable-method = "psci"; 47 next-level-cache = <&L2_0>; 48 qcom,freq-domain = <&cpufreq_hw 0>; 49 operating-points-v2 = <&cpu0_opp_table>; 50 interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; 51 power-domains = <&CPU_PD0>; 52 power-domain-names = "psci"; 53 #cooling-cells = <2>; 54 L2_0: l2-cache { 55 compatible = "cache"; 56 cache-level = <2>; 57 cache-unified; 58 next-level-cache = <&L3_0>; 59 L3_0: l3-cache { 60 compatible = "cache"; 61 cache-level = <3>; 62 cache-unified; 63 }; 64 }; 65 }; 66 67 CPU1: cpu@100 { 68 device_type = "cpu"; 69 compatible = "qcom,kryo660"; 70 reg = <0x0 0x100>; 71 clocks = <&cpufreq_hw 0>; 72 enable-method = "psci"; 73 next-level-cache = <&L2_100>; 74 qcom,freq-domain = <&cpufreq_hw 0>; 75 operating-points-v2 = <&cpu0_opp_table>; 76 interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; 77 power-domains = <&CPU_PD1>; 78 power-domain-names = "psci"; 79 #cooling-cells = <2>; 80 L2_100: l2-cache { 81 compatible = "cache"; 82 cache-level = <2>; 83 cache-unified; 84 next-level-cache = <&L3_0>; 85 }; 86 }; 87 88 CPU2: cpu@200 { 89 device_type = "cpu"; 90 compatible = "qcom,kryo660"; 91 reg = <0x0 0x200>; 92 clocks = <&cpufreq_hw 0>; 93 enable-method = "psci"; 94 next-level-cache = <&L2_200>; 95 qcom,freq-domain = <&cpufreq_hw 0>; 96 operating-points-v2 = <&cpu0_opp_table>; 97 interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; 98 power-domains = <&CPU_PD2>; 99 power-domain-names = "psci"; 100 #cooling-cells = <2>; 101 L2_200: l2-cache { 102 compatible = "cache"; 103 cache-level = <2>; 104 cache-unified; 105 next-level-cache = <&L3_0>; 106 }; 107 }; 108 109 CPU3: cpu@300 { 110 device_type = "cpu"; 111 compatible = "qcom,kryo660"; 112 reg = <0x0 0x300>; 113 clocks = <&cpufreq_hw 0>; 114 enable-method = "psci"; 115 next-level-cache = <&L2_300>; 116 qcom,freq-domain = <&cpufreq_hw 0>; 117 operating-points-v2 = <&cpu0_opp_table>; 118 interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; 119 power-domains = <&CPU_PD3>; 120 power-domain-names = "psci"; 121 #cooling-cells = <2>; 122 L2_300: l2-cache { 123 compatible = "cache"; 124 cache-level = <2>; 125 cache-unified; 126 next-level-cache = <&L3_0>; 127 }; 128 }; 129 130 CPU4: cpu@400 { 131 device_type = "cpu"; 132 compatible = "qcom,kryo660"; 133 reg = <0x0 0x400>; 134 clocks = <&cpufreq_hw 0>; 135 enable-method = "psci"; 136 next-level-cache = <&L2_400>; 137 qcom,freq-domain = <&cpufreq_hw 0>; 138 operating-points-v2 = <&cpu0_opp_table>; 139 interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; 140 power-domains = <&CPU_PD4>; 141 power-domain-names = "psci"; 142 #cooling-cells = <2>; 143 L2_400: l2-cache { 144 compatible = "cache"; 145 cache-level = <2>; 146 cache-unified; 147 next-level-cache = <&L3_0>; 148 }; 149 }; 150 151 CPU5: cpu@500 { 152 device_type = "cpu"; 153 compatible = "qcom,kryo660"; 154 reg = <0x0 0x500>; 155 clocks = <&cpufreq_hw 0>; 156 enable-method = "psci"; 157 next-level-cache = <&L2_500>; 158 qcom,freq-domain = <&cpufreq_hw 0>; 159 operating-points-v2 = <&cpu0_opp_table>; 160 interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; 161 power-domains = <&CPU_PD5>; 162 power-domain-names = "psci"; 163 #cooling-cells = <2>; 164 L2_500: l2-cache { 165 compatible = "cache"; 166 cache-level = <2>; 167 cache-unified; 168 next-level-cache = <&L3_0>; 169 }; 170 }; 171 172 CPU6: cpu@600 { 173 device_type = "cpu"; 174 compatible = "qcom,kryo660"; 175 reg = <0x0 0x600>; 176 clocks = <&cpufreq_hw 1>; 177 enable-method = "psci"; 178 next-level-cache = <&L2_600>; 179 qcom,freq-domain = <&cpufreq_hw 1>; 180 operating-points-v2 = <&cpu6_opp_table>; 181 interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; 182 power-domains = <&CPU_PD6>; 183 power-domain-names = "psci"; 184 #cooling-cells = <2>; 185 L2_600: l2-cache { 186 compatible = "cache"; 187 cache-level = <2>; 188 cache-unified; 189 next-level-cache = <&L3_0>; 190 }; 191 }; 192 193 CPU7: cpu@700 { 194 device_type = "cpu"; 195 compatible = "qcom,kryo660"; 196 reg = <0x0 0x700>; 197 clocks = <&cpufreq_hw 1>; 198 enable-method = "psci"; 199 next-level-cache = <&L2_700>; 200 qcom,freq-domain = <&cpufreq_hw 1>; 201 operating-points-v2 = <&cpu6_opp_table>; 202 interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>; 203 power-domains = <&CPU_PD7>; 204 power-domain-names = "psci"; 205 #cooling-cells = <2>; 206 L2_700: l2-cache { 207 compatible = "cache"; 208 cache-level = <2>; 209 cache-unified; 210 next-level-cache = <&L3_0>; 211 }; 212 }; 213 214 cpu-map { 215 cluster0 { 216 core0 { 217 cpu = <&CPU0>; 218 }; 219 220 core1 { 221 cpu = <&CPU1>; 222 }; 223 224 core2 { 225 cpu = <&CPU2>; 226 }; 227 228 core3 { 229 cpu = <&CPU3>; 230 }; 231 232 core4 { 233 cpu = <&CPU4>; 234 }; 235 236 core5 { 237 cpu = <&CPU5>; 238 }; 239 240 core6 { 241 cpu = <&CPU6>; 242 }; 243 244 core7 { 245 cpu = <&CPU7>; 246 }; 247 }; 248 }; 249 250 idle-states { 251 entry-method = "psci"; 252 253 LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { 254 compatible = "arm,idle-state"; 255 idle-state-name = "silver-power-collapse"; 256 arm,psci-suspend-param = <0x40000003>; 257 entry-latency-us = <549>; 258 exit-latency-us = <901>; 259 min-residency-us = <1774>; 260 local-timer-stop; 261 }; 262 263 LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { 264 compatible = "arm,idle-state"; 265 idle-state-name = "silver-rail-power-collapse"; 266 arm,psci-suspend-param = <0x40000004>; 267 entry-latency-us = <702>; 268 exit-latency-us = <915>; 269 min-residency-us = <4001>; 270 local-timer-stop; 271 }; 272 273 BIG_CPU_SLEEP_0: cpu-sleep-1-0 { 274 compatible = "arm,idle-state"; 275 idle-state-name = "gold-power-collapse"; 276 arm,psci-suspend-param = <0x40000003>; 277 entry-latency-us = <523>; 278 exit-latency-us = <1244>; 279 min-residency-us = <2207>; 280 local-timer-stop; 281 }; 282 283 BIG_CPU_SLEEP_1: cpu-sleep-1-1 { 284 compatible = "arm,idle-state"; 285 idle-state-name = "gold-rail-power-collapse"; 286 arm,psci-suspend-param = <0x40000004>; 287 entry-latency-us = <526>; 288 exit-latency-us = <1854>; 289 min-residency-us = <5555>; 290 local-timer-stop; 291 }; 292 }; 293 294 domain-idle-states { 295 CLUSTER_SLEEP_0: cluster-sleep-0 { 296 compatible = "domain-idle-state"; 297 arm,psci-suspend-param = <0x41000044>; 298 entry-latency-us = <2752>; 299 exit-latency-us = <3048>; 300 min-residency-us = <6118>; 301 }; 302 }; 303 }; 304 305 firmware { 306 scm { 307 compatible = "qcom,scm-sm6375", "qcom,scm"; 308 clocks = <&rpmcc RPM_SMD_CE1_CLK>; 309 clock-names = "core"; 310 #reset-cells = <1>; 311 }; 312 }; 313 314 mpm: interrupt-controller { 315 compatible = "qcom,mpm"; 316 qcom,rpm-msg-ram = <&apss_mpm>; 317 interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; 318 mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>; 319 interrupt-controller; 320 #interrupt-cells = <2>; 321 #power-domain-cells = <0>; 322 interrupt-parent = <&intc>; 323 qcom,mpm-pin-count = <96>; 324 qcom,mpm-pin-map = <5 296>, /* Soundwire wake_irq */ 325 <12 422>, /* DWC3 ss_phy_irq */ 326 <86 183>, /* MPM wake, SPMI */ 327 <89 314>, /* TSENS0 0C */ 328 <90 315>, /* TSENS1 0C */ 329 <93 164>, /* DWC3 dm_hs_phy_irq */ 330 <94 165>; /* DWC3 dp_hs_phy_irq */ 331 }; 332 333 memory@80000000 { 334 device_type = "memory"; 335 /* We expect the bootloader to fill in the size */ 336 reg = <0x0 0x80000000 0x0 0x0>; 337 }; 338 339 cpu0_opp_table: opp-table-cpu0 { 340 compatible = "operating-points-v2"; 341 opp-shared; 342 343 opp-300000000 { 344 opp-hz = /bits/ 64 <300000000>; 345 opp-peak-kBps = <(300000 * 32)>; 346 }; 347 348 opp-576000000 { 349 opp-hz = /bits/ 64 <576000000>; 350 opp-peak-kBps = <(556800 * 32)>; 351 }; 352 353 opp-691200000 { 354 opp-hz = /bits/ 64 <691200000>; 355 opp-peak-kBps = <(652800 * 32)>; 356 }; 357 358 opp-940800000 { 359 opp-hz = /bits/ 64 <940800000>; 360 opp-peak-kBps = <(921600 * 32)>; 361 }; 362 363 opp-1113600000 { 364 opp-hz = /bits/ 64 <1113600000>; 365 opp-peak-kBps = <(921600 * 32)>; 366 }; 367 368 opp-1324800000 { 369 opp-hz = /bits/ 64 <1324800000>; 370 opp-peak-kBps = <(1171200 * 32)>; 371 }; 372 373 opp-1516800000 { 374 opp-hz = /bits/ 64 <1516800000>; 375 opp-peak-kBps = <(1497600 * 32)>; 376 }; 377 378 opp-1651200000 { 379 opp-hz = /bits/ 64 <1651200000>; 380 opp-peak-kBps = <(1497600 * 32)>; 381 }; 382 383 opp-1708800000 { 384 opp-hz = /bits/ 64 <1708800000>; 385 opp-peak-kBps = <(1497600 * 32)>; 386 }; 387 388 opp-1804800000 { 389 opp-hz = /bits/ 64 <1804800000>; 390 opp-peak-kBps = <(1497600 * 32)>; 391 }; 392 }; 393 394 cpu6_opp_table: opp-table-cpu6 { 395 compatible = "operating-points-v2"; 396 opp-shared; 397 398 opp-691200000 { 399 opp-hz = /bits/ 64 <691200000>; 400 opp-peak-kBps = <(556800 * 32)>; 401 }; 402 403 opp-940800000 { 404 opp-hz = /bits/ 64 <940800000>; 405 opp-peak-kBps = <(921600 * 32)>; 406 }; 407 408 opp-1228800000 { 409 opp-hz = /bits/ 64 <1228800000>; 410 opp-peak-kBps = <(1171200 * 32)>; 411 }; 412 413 opp-1401600000 { 414 opp-hz = /bits/ 64 <1401600000>; 415 opp-peak-kBps = <(1382400 * 32)>; 416 }; 417 418 opp-1516800000 { 419 opp-hz = /bits/ 64 <1516800000>; 420 opp-peak-kBps = <(1497600 * 32)>; 421 }; 422 423 opp-1651200000 { 424 opp-hz = /bits/ 64 <1651200000>; 425 opp-peak-kBps = <(1497600 * 32)>; 426 }; 427 428 opp-1804800000 { 429 opp-hz = /bits/ 64 <1804800000>; 430 opp-peak-kBps = <(1497600 * 32)>; 431 }; 432 433 opp-1900800000 { 434 opp-hz = /bits/ 64 <1900800000>; 435 opp-peak-kBps = <(1497600 * 32)>; 436 }; 437 438 opp-2054400000 { 439 opp-hz = /bits/ 64 <2054400000>; 440 opp-peak-kBps = <(1497600 * 32)>; 441 }; 442 443 opp-2208000000 { 444 opp-hz = /bits/ 64 <2208000000>; 445 opp-peak-kBps = <(1497600 * 32)>; 446 }; 447 }; 448 449 pmu { 450 compatible = "arm,armv8-pmuv3"; 451 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; 452 }; 453 454 psci { 455 compatible = "arm,psci-1.0"; 456 method = "smc"; 457 458 CPU_PD0: power-domain-cpu0 { 459 #power-domain-cells = <0>; 460 power-domains = <&CLUSTER_PD>; 461 domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; 462 }; 463 464 CPU_PD1: power-domain-cpu1 { 465 #power-domain-cells = <0>; 466 power-domains = <&CLUSTER_PD>; 467 domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; 468 }; 469 470 CPU_PD2: power-domain-cpu2 { 471 #power-domain-cells = <0>; 472 power-domains = <&CLUSTER_PD>; 473 domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; 474 }; 475 476 CPU_PD3: power-domain-cpu3 { 477 #power-domain-cells = <0>; 478 power-domains = <&CLUSTER_PD>; 479 domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; 480 }; 481 482 CPU_PD4: power-domain-cpu4 { 483 #power-domain-cells = <0>; 484 power-domains = <&CLUSTER_PD>; 485 domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; 486 }; 487 488 CPU_PD5: power-domain-cpu5 { 489 #power-domain-cells = <0>; 490 power-domains = <&CLUSTER_PD>; 491 domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; 492 }; 493 494 CPU_PD6: power-domain-cpu6 { 495 #power-domain-cells = <0>; 496 power-domains = <&CLUSTER_PD>; 497 domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; 498 }; 499 500 CPU_PD7: power-domain-cpu7 { 501 #power-domain-cells = <0>; 502 power-domains = <&CLUSTER_PD>; 503 domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; 504 }; 505 506 CLUSTER_PD: power-domain-cpu-cluster0 { 507 #power-domain-cells = <0>; 508 power-domains = <&mpm>; 509 domain-idle-states = <&CLUSTER_SLEEP_0>; 510 }; 511 }; 512 513 qup_opp_table: opp-table-qup { 514 compatible = "operating-points-v2"; 515 516 opp-75000000 { 517 opp-hz = /bits/ 64 <75000000>; 518 required-opps = <&rpmpd_opp_low_svs>; 519 }; 520 521 opp-100000000 { 522 opp-hz = /bits/ 64 <100000000>; 523 required-opps = <&rpmpd_opp_svs>; 524 }; 525 526 opp-128000000 { 527 opp-hz = /bits/ 64 <128000000>; 528 required-opps = <&rpmpd_opp_nom>; 529 }; 530 }; 531 532 reserved_memory: reserved-memory { 533 #address-cells = <2>; 534 #size-cells = <2>; 535 ranges; 536 537 hyp_mem: hypervisor@80000000 { 538 reg = <0 0x80000000 0 0x600000>; 539 no-map; 540 }; 541 542 xbl_aop_mem: xbl-aop@80700000 { 543 reg = <0 0x80700000 0 0x100000>; 544 no-map; 545 }; 546 547 reserved_xbl_uefi: xbl-uefi-res@80880000 { 548 reg = <0 0x80880000 0 0x14000>; 549 no-map; 550 }; 551 552 smem_mem: smem@80900000 { 553 compatible = "qcom,smem"; 554 reg = <0 0x80900000 0 0x200000>; 555 hwlocks = <&tcsr_mutex 3>; 556 no-map; 557 }; 558 559 fw_mem: fw@80b00000 { 560 reg = <0 0x80b00000 0 0x100000>; 561 no-map; 562 }; 563 564 cdsp_secure_heap_mem: cdsp-sec-heap@80c00000 { 565 reg = <0 0x80c00000 0 0x1e00000>; 566 no-map; 567 }; 568 569 dfps_data_mem: dpfs-data@85e00000 { 570 reg = <0 0x85e00000 0 0x100000>; 571 no-map; 572 }; 573 574 pil_wlan_mem: pil-wlan@86500000 { 575 reg = <0 0x86500000 0 0x200000>; 576 no-map; 577 }; 578 579 pil_adsp_mem: pil-adsp@86700000 { 580 reg = <0 0x86700000 0 0x2000000>; 581 no-map; 582 }; 583 584 pil_cdsp_mem: pil-cdsp@88700000 { 585 reg = <0 0x88700000 0 0x1e00000>; 586 no-map; 587 }; 588 589 pil_video_mem: pil-video@8a500000 { 590 reg = <0 0x8a500000 0 0x500000>; 591 no-map; 592 }; 593 594 pil_ipa_fw_mem: pil-ipa-fw@8aa00000 { 595 reg = <0 0x8aa00000 0 0x10000>; 596 no-map; 597 }; 598 599 pil_ipa_gsi_mem: pil-ipa-gsi@8aa10000 { 600 reg = <0 0x8aa10000 0 0xa000>; 601 no-map; 602 }; 603 604 pil_gpu_micro_code_mem: pil-gpu-ucode@8aa1a000 { 605 reg = <0 0x8aa1a000 0 0x2000>; 606 no-map; 607 }; 608 609 pil_mpss_wlan_mem: pil-mpss-wlan@8b800000 { 610 reg = <0 0x8b800000 0 0x10000000>; 611 no-map; 612 }; 613 614 removed_mem: removed@c0000000 { 615 reg = <0 0xc0000000 0 0x5100000>; 616 no-map; 617 }; 618 619 rmtfs_mem: rmtfs@f3900000 { 620 compatible = "qcom,rmtfs-mem"; 621 reg = <0 0xf3900000 0 0x280000>; 622 no-map; 623 624 qcom,client-id = <1>; 625 qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>; 626 }; 627 628 debug_mem: debug@ffb00000 { 629 reg = <0 0xffb00000 0 0xc0000>; 630 no-map; 631 }; 632 633 last_log_mem: lastlog@ffbc0000 { 634 reg = <0 0xffbc0000 0 0x80000>; 635 no-map; 636 }; 637 638 cmdline_region: cmdline@ffd00000 { 639 reg = <0 0xffd00000 0 0x1000>; 640 no-map; 641 }; 642 }; 643 644 rpm: remoteproc { 645 compatible = "qcom,sm6375-rpm-proc", "qcom,rpm-proc"; 646 647 glink-edge { 648 compatible = "qcom,glink-rpm"; 649 interrupts-extended = <&ipcc IPCC_CLIENT_AOP 650 IPCC_MPROC_SIGNAL_GLINK_QMP 651 IRQ_TYPE_EDGE_RISING>; 652 qcom,rpm-msg-ram = <&rpm_msg_ram>; 653 mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; 654 655 rpm_requests: rpm-requests { 656 compatible = "qcom,rpm-sm6375"; 657 qcom,glink-channels = "rpm_requests"; 658 659 rpmcc: clock-controller { 660 compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc"; 661 clocks = <&xo_board_clk>; 662 clock-names = "xo"; 663 #clock-cells = <1>; 664 }; 665 666 rpmpd: power-controller { 667 compatible = "qcom,sm6375-rpmpd"; 668 #power-domain-cells = <1>; 669 operating-points-v2 = <&rpmpd_opp_table>; 670 671 rpmpd_opp_table: opp-table { 672 compatible = "operating-points-v2"; 673 674 rpmpd_opp_ret: opp1 { 675 opp-level = <RPM_SMD_LEVEL_RETENTION>; 676 }; 677 678 rpmpd_opp_min_svs: opp2 { 679 opp-level = <RPM_SMD_LEVEL_MIN_SVS>; 680 }; 681 682 rpmpd_opp_low_svs: opp3 { 683 opp-level = <RPM_SMD_LEVEL_LOW_SVS>; 684 }; 685 686 rpmpd_opp_svs: opp4 { 687 opp-level = <RPM_SMD_LEVEL_SVS>; 688 }; 689 690 rpmpd_opp_svs_plus: opp5 { 691 opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; 692 }; 693 694 rpmpd_opp_nom: opp6 { 695 opp-level = <RPM_SMD_LEVEL_NOM>; 696 }; 697 698 rpmpd_opp_nom_plus: opp7 { 699 opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; 700 }; 701 702 rpmpd_opp_turbo: opp8 { 703 opp-level = <RPM_SMD_LEVEL_TURBO>; 704 }; 705 706 rpmpd_opp_turbo_no_cpr: opp9 { 707 opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; 708 }; 709 }; 710 }; 711 }; 712 }; 713 }; 714 715 smp2p-adsp { 716 compatible = "qcom,smp2p"; 717 qcom,smem = <443>, <429>; 718 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS 719 IPCC_MPROC_SIGNAL_SMP2P 720 IRQ_TYPE_EDGE_RISING>; 721 mboxes = <&ipcc IPCC_CLIENT_LPASS 722 IPCC_MPROC_SIGNAL_SMP2P>; 723 724 qcom,local-pid = <0>; 725 qcom,remote-pid = <2>; 726 727 smp2p_adsp_out: master-kernel { 728 qcom,entry-name = "master-kernel"; 729 #qcom,smem-state-cells = <1>; 730 }; 731 732 smp2p_adsp_in: slave-kernel { 733 qcom,entry-name = "slave-kernel"; 734 interrupt-controller; 735 #interrupt-cells = <2>; 736 }; 737 }; 738 739 smp2p-cdsp { 740 compatible = "qcom,smp2p"; 741 qcom,smem = <94>, <432>; 742 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP 743 IPCC_MPROC_SIGNAL_SMP2P 744 IRQ_TYPE_EDGE_RISING>; 745 mboxes = <&ipcc IPCC_CLIENT_CDSP 746 IPCC_MPROC_SIGNAL_SMP2P>; 747 748 qcom,local-pid = <0>; 749 qcom,remote-pid = <5>; 750 751 smp2p_cdsp_out: master-kernel { 752 qcom,entry-name = "master-kernel"; 753 #qcom,smem-state-cells = <1>; 754 }; 755 756 smp2p_cdsp_in: slave-kernel { 757 qcom,entry-name = "slave-kernel"; 758 interrupt-controller; 759 #interrupt-cells = <2>; 760 }; 761 }; 762 763 smp2p-modem { 764 compatible = "qcom,smp2p"; 765 qcom,smem = <435>, <428>; 766 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS 767 IPCC_MPROC_SIGNAL_SMP2P 768 IRQ_TYPE_EDGE_RISING>; 769 mboxes = <&ipcc IPCC_CLIENT_MPSS 770 IPCC_MPROC_SIGNAL_SMP2P>; 771 772 qcom,local-pid = <0>; 773 qcom,remote-pid = <1>; 774 775 smp2p_modem_out: master-kernel { 776 qcom,entry-name = "master-kernel"; 777 #qcom,smem-state-cells = <1>; 778 }; 779 780 smp2p_modem_in: slave-kernel { 781 qcom,entry-name = "slave-kernel"; 782 interrupt-controller; 783 #interrupt-cells = <2>; 784 }; 785 786 ipa_smp2p_out: ipa-ap-to-modem { 787 qcom,entry-name = "ipa"; 788 #qcom,smem-state-cells = <1>; 789 }; 790 791 ipa_smp2p_in: ipa-modem-to-ap { 792 qcom,entry-name = "ipa"; 793 interrupt-controller; 794 #interrupt-cells = <2>; 795 }; 796 797 wlan_smp2p_in: wlan-wpss-to-ap { 798 qcom,entry-name = "wlan"; 799 interrupt-controller; 800 #interrupt-cells = <2>; 801 }; 802 }; 803 804 soc: soc@0 { 805 #address-cells = <2>; 806 #size-cells = <2>; 807 ranges = <0 0 0 0 0x10 0>; 808 dma-ranges = <0 0 0 0 0x10 0>; 809 compatible = "simple-bus"; 810 811 ipcc: mailbox@208000 { 812 compatible = "qcom,sm6375-ipcc", "qcom,ipcc"; 813 reg = <0 0x00208000 0 0x1000>; 814 interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>; 815 interrupt-controller; 816 #interrupt-cells = <3>; 817 #mbox-cells = <2>; 818 }; 819 820 tcsr_mutex: hwlock@340000 { 821 compatible = "qcom,tcsr-mutex"; 822 reg = <0x0 0x00340000 0x0 0x40000>; 823 #hwlock-cells = <1>; 824 }; 825 826 tlmm: pinctrl@500000 { 827 compatible = "qcom,sm6375-tlmm"; 828 reg = <0 0x00500000 0 0x800000>; 829 interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; 830 gpio-ranges = <&tlmm 0 0 157>; 831 wakeup-parent = <&mpm>; 832 interrupt-controller; 833 gpio-controller; 834 #interrupt-cells = <2>; 835 #gpio-cells = <2>; 836 837 sdc2_off_state: sdc2-off-state { 838 clk-pins { 839 pins = "sdc2_clk"; 840 drive-strength = <2>; 841 bias-disable; 842 }; 843 844 cmd-pins { 845 pins = "sdc2_cmd"; 846 drive-strength = <2>; 847 bias-pull-up; 848 }; 849 850 data-pins { 851 pins = "sdc2_data"; 852 drive-strength = <2>; 853 bias-pull-up; 854 }; 855 }; 856 857 sdc2_on_state: sdc2-on-state { 858 clk-pins { 859 pins = "sdc2_clk"; 860 drive-strength = <16>; 861 bias-disable; 862 }; 863 864 cmd-pins { 865 pins = "sdc2_cmd"; 866 drive-strength = <10>; 867 bias-pull-up; 868 }; 869 870 data-pins { 871 pins = "sdc2_data"; 872 drive-strength = <10>; 873 bias-pull-up; 874 }; 875 }; 876 877 qup_i2c0_default: qup-i2c0-default-state { 878 pins = "gpio0", "gpio1"; 879 function = "qup00"; 880 drive-strength = <2>; 881 bias-pull-up; 882 }; 883 884 qup_i2c1_default: qup-i2c1-default-state { 885 pins = "gpio61", "gpio62"; 886 function = "qup01"; 887 drive-strength = <2>; 888 bias-pull-up; 889 }; 890 891 qup_i2c2_default: qup-i2c2-default-state { 892 pins = "gpio45", "gpio46"; 893 function = "qup02"; 894 drive-strength = <2>; 895 bias-pull-up; 896 }; 897 898 qup_i2c8_default: qup-i2c8-default-state { 899 pins = "gpio19", "gpio20"; 900 /* TLMM, GCC and vendor DT all have different indices.. */ 901 function = "qup12"; 902 drive-strength = <2>; 903 bias-pull-up; 904 }; 905 906 qup_i2c10_default: qup-i2c10-default-state { 907 pins = "gpio4", "gpio5"; 908 function = "qup10"; 909 drive-strength = <2>; 910 bias-pull-up; 911 }; 912 913 qup_spi0_default: qup-spi0-default-state { 914 pins = "gpio0", "gpio1", "gpio2", "gpio3"; 915 function = "qup00"; 916 drive-strength = <6>; 917 bias-disable; 918 }; 919 920 qup_uart1_default: qup-uart1-default-state { 921 cts-pins { 922 pins = "gpio61"; 923 function = "qup01"; 924 drive-strength = <2>; 925 bias-pull-down; 926 }; 927 928 rts-pins { 929 pins = "gpio62"; 930 function = "qup01"; 931 drive-strength = <2>; 932 bias-disable; 933 }; 934 935 tx-pins { 936 pins = "gpio63"; 937 function = "qup01"; 938 drive-strength = <2>; 939 bias-disable; 940 }; 941 942 rx-pins { 943 pins = "gpio64"; 944 function = "qup01"; 945 drive-strength = <2>; 946 bias-pull-up; 947 }; 948 }; 949 }; 950 951 gcc: clock-controller@1400000 { 952 compatible = "qcom,sm6375-gcc"; 953 reg = <0 0x01400000 0 0x1f0000>; 954 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, 955 <&rpmcc RPM_SMD_XO_A_CLK_SRC>, 956 <&sleep_clk>; 957 #power-domain-cells = <1>; 958 #clock-cells = <1>; 959 #reset-cells = <1>; 960 }; 961 962 usb_1_hsphy: phy@162b000 { 963 compatible = "qcom,sm6375-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; 964 reg = <0 0x0162b000 0 0x400>; 965 966 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; 967 clock-names = "ref"; 968 resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; 969 #phy-cells = <0>; 970 971 status = "disabled"; 972 }; 973 974 spmi_bus: spmi@1c40000 { 975 compatible = "qcom,spmi-pmic-arb"; 976 reg = <0 0x01c40000 0 0x1100>, 977 <0 0x01e00000 0 0x2000000>, 978 <0 0x03e00000 0 0x100000>, 979 <0 0x03f00000 0 0xa0000>, 980 <0 0x01c0a000 0 0x26000>; 981 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; 982 interrupt-names = "periph_irq"; 983 interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>; 984 qcom,ee = <0>; 985 qcom,channel = <0>; 986 #address-cells = <2>; 987 #size-cells = <0>; 988 interrupt-controller; 989 #interrupt-cells = <4>; 990 }; 991 992 tsens0: thermal-sensor@4411000 { 993 compatible = "qcom,sm6375-tsens", "qcom,tsens-v2"; 994 reg = <0 0x04411000 0 0x140>, /* TM */ 995 <0 0x04410000 0 0x20>; /* SROT */ 996 interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, 997 <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; 998 interrupt-names = "uplow", "critical"; 999 #thermal-sensor-cells = <1>; 1000 #qcom,sensors = <15>; 1001 }; 1002 1003 tsens1: thermal-sensor@4413000 { 1004 compatible = "qcom,sm6375-tsens", "qcom,tsens-v2"; 1005 reg = <0 0x04413000 0 0x140>, /* TM */ 1006 <0 0x04412000 0 0x20>; /* SROT */ 1007 interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, 1008 <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>; 1009 interrupt-names = "uplow", "critical"; 1010 #thermal-sensor-cells = <1>; 1011 #qcom,sensors = <11>; 1012 }; 1013 1014 rpm_msg_ram: sram@45f0000 { 1015 compatible = "qcom,rpm-msg-ram", "mmio-sram"; 1016 reg = <0 0x045f0000 0 0x7000>; 1017 #address-cells = <1>; 1018 #size-cells = <1>; 1019 ranges = <0 0x0 0x045f0000 0x7000>; 1020 1021 apss_mpm: sram@1b8 { 1022 reg = <0x1b8 0x48>; 1023 }; 1024 }; 1025 1026 sram@4690000 { 1027 compatible = "qcom,rpm-stats"; 1028 reg = <0 0x04690000 0 0x400>; 1029 }; 1030 1031 sdhc_2: mmc@4784000 { 1032 compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5"; 1033 reg = <0 0x04784000 0 0x1000>; 1034 1035 interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, 1036 <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; 1037 interrupt-names = "hc_irq", "pwr_irq"; 1038 1039 clocks = <&gcc GCC_SDCC2_AHB_CLK>, 1040 <&gcc GCC_SDCC2_APPS_CLK>, 1041 <&rpmcc RPM_SMD_XO_CLK_SRC>; 1042 clock-names = "iface", "core", "xo"; 1043 resets = <&gcc GCC_SDCC2_BCR>; 1044 iommus = <&apps_smmu 0x40 0x0>; 1045 1046 pinctrl-0 = <&sdc2_on_state>; 1047 pinctrl-1 = <&sdc2_off_state>; 1048 pinctrl-names = "default", "sleep"; 1049 1050 qcom,dll-config = <0x0007642c>; 1051 qcom,ddr-config = <0x80040868>; 1052 power-domains = <&rpmpd SM6375_VDDCX>; 1053 operating-points-v2 = <&sdhc2_opp_table>; 1054 bus-width = <4>; 1055 1056 status = "disabled"; 1057 1058 sdhc2_opp_table: opp-table { 1059 compatible = "operating-points-v2"; 1060 1061 opp-100000000 { 1062 opp-hz = /bits/ 64 <100000000>; 1063 required-opps = <&rpmpd_opp_low_svs>; 1064 }; 1065 1066 opp-202000000 { 1067 opp-hz = /bits/ 64 <202000000>; 1068 required-opps = <&rpmpd_opp_svs_plus>; 1069 }; 1070 }; 1071 }; 1072 1073 gpi_dma0: dma-controller@4a00000 { 1074 compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma"; 1075 reg = <0 0x04a00000 0 0x60000>; 1076 interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, 1077 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, 1078 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, 1079 <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, 1080 <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, 1081 <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, 1082 <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, 1083 <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, 1084 <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, 1085 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; 1086 dma-channels = <10>; 1087 dma-channel-mask = <0x1f>; 1088 iommus = <&apps_smmu 0x16 0x0>; 1089 #dma-cells = <3>; 1090 status = "disabled"; 1091 }; 1092 1093 qupv3_id_0: geniqup@4ac0000 { 1094 compatible = "qcom,geni-se-qup"; 1095 reg = <0x0 0x04ac0000 0x0 0x2000>; 1096 clock-names = "m-ahb", "s-ahb"; 1097 clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, 1098 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; 1099 iommus = <&apps_smmu 0x3 0x0>; 1100 #address-cells = <2>; 1101 #size-cells = <2>; 1102 ranges; 1103 status = "disabled"; 1104 1105 i2c0: i2c@4a80000 { 1106 compatible = "qcom,geni-i2c"; 1107 reg = <0x0 0x04a80000 0x0 0x4000>; 1108 clock-names = "se"; 1109 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; 1110 interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; 1111 pinctrl-names = "default"; 1112 pinctrl-0 = <&qup_i2c0_default>; 1113 dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, 1114 <&gpi_dma0 1 0 QCOM_GPI_I2C>; 1115 dma-names = "tx", "rx"; 1116 #address-cells = <1>; 1117 #size-cells = <0>; 1118 status = "disabled"; 1119 }; 1120 1121 spi0: spi@4a80000 { 1122 compatible = "qcom,geni-spi"; 1123 reg = <0x0 0x04a80000 0x0 0x4000>; 1124 clock-names = "se"; 1125 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; 1126 interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; 1127 pinctrl-names = "default"; 1128 pinctrl-0 = <&qup_spi0_default>; 1129 power-domains = <&rpmpd SM6375_VDDCX>; 1130 operating-points-v2 = <&qup_opp_table>; 1131 dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, 1132 <&gpi_dma0 1 0 QCOM_GPI_SPI>; 1133 dma-names = "tx", "rx"; 1134 #address-cells = <1>; 1135 #size-cells = <0>; 1136 status = "disabled"; 1137 }; 1138 1139 i2c1: i2c@4a84000 { 1140 compatible = "qcom,geni-i2c"; 1141 reg = <0x0 0x04a84000 0x0 0x4000>; 1142 clock-names = "se"; 1143 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; 1144 interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; 1145 pinctrl-names = "default"; 1146 pinctrl-0 = <&qup_i2c1_default>; 1147 dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, 1148 <&gpi_dma0 1 1 QCOM_GPI_I2C>; 1149 dma-names = "tx", "rx"; 1150 #address-cells = <1>; 1151 #size-cells = <0>; 1152 status = "disabled"; 1153 }; 1154 1155 spi1: spi@4a84000 { 1156 compatible = "qcom,geni-spi"; 1157 reg = <0x0 0x04a84000 0x0 0x4000>; 1158 clock-names = "se"; 1159 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; 1160 interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; 1161 power-domains = <&rpmpd SM6375_VDDCX>; 1162 operating-points-v2 = <&qup_opp_table>; 1163 dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, 1164 <&gpi_dma0 1 1 QCOM_GPI_SPI>; 1165 dma-names = "tx", "rx"; 1166 #address-cells = <1>; 1167 #size-cells = <0>; 1168 status = "disabled"; 1169 }; 1170 1171 uart1: serial@4a84000 { 1172 compatible = "qcom,geni-uart"; 1173 reg = <0x0 0x04a84000 0x0 0x4000>; 1174 interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; 1175 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; 1176 clock-names = "se"; 1177 power-domains = <&rpmpd SM6375_VDDCX>; 1178 operating-points-v2 = <&qup_opp_table>; 1179 pinctrl-0 = <&qup_uart1_default>; 1180 pinctrl-names = "default"; 1181 status = "disabled"; 1182 }; 1183 1184 i2c2: i2c@4a88000 { 1185 compatible = "qcom,geni-i2c"; 1186 reg = <0x0 0x04a88000 0x0 0x4000>; 1187 clock-names = "se"; 1188 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; 1189 interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; 1190 pinctrl-names = "default"; 1191 pinctrl-0 = <&qup_i2c2_default>; 1192 dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, 1193 <&gpi_dma0 1 2 QCOM_GPI_I2C>; 1194 dma-names = "tx", "rx"; 1195 #address-cells = <1>; 1196 #size-cells = <0>; 1197 status = "disabled"; 1198 }; 1199 1200 spi2: spi@4a88000 { 1201 compatible = "qcom,geni-spi"; 1202 reg = <0x0 0x04a88000 0x0 0x4000>; 1203 clock-names = "se"; 1204 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; 1205 interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>; 1206 power-domains = <&rpmpd SM6375_VDDCX>; 1207 operating-points-v2 = <&qup_opp_table>; 1208 dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, 1209 <&gpi_dma0 1 2 QCOM_GPI_SPI>; 1210 dma-names = "tx", "rx"; 1211 #address-cells = <1>; 1212 #size-cells = <0>; 1213 status = "disabled"; 1214 }; 1215 1216 /* 1217 * As per GCC, QUP3/4/5/11 also exist, but are not even defined downstream. 1218 * There is a comment in the included DTSI of another SoC saying that they 1219 * are not "bolled out" (probably meaning not routed to solder balls) 1220 * TLMM driver however, suggests there are as many as 15 QUPs in total! 1221 * Most of which don't even have pin configurations for.. Sad stuff! 1222 */ 1223 }; 1224 1225 gpi_dma1: dma-controller@4c00000 { 1226 compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma"; 1227 reg = <0 0x04c00000 0 0x60000>; 1228 interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>, 1229 <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>, 1230 <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>, 1231 <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>, 1232 <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>, 1233 <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>, 1234 <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>, 1235 <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>, 1236 <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>, 1237 <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>; 1238 dma-channels = <10>; 1239 dma-channel-mask = <0x1f>; 1240 iommus = <&apps_smmu 0xd6 0x0>; 1241 #dma-cells = <3>; 1242 status = "disabled"; 1243 }; 1244 1245 qupv3_id_1: geniqup@4cc0000 { 1246 compatible = "qcom,geni-se-qup"; 1247 reg = <0x0 0x04cc0000 0x0 0x2000>; 1248 clock-names = "m-ahb", "s-ahb"; 1249 clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, 1250 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; 1251 iommus = <&apps_smmu 0xc3 0x0>; 1252 #address-cells = <2>; 1253 #size-cells = <2>; 1254 ranges; 1255 status = "disabled"; 1256 1257 i2c6: i2c@4c80000 { 1258 compatible = "qcom,geni-i2c"; 1259 reg = <0x0 0x04c80000 0x0 0x4000>; 1260 clock-names = "se"; 1261 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; 1262 interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; 1263 dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, 1264 <&gpi_dma1 1 0 QCOM_GPI_I2C>; 1265 dma-names = "tx", "rx"; 1266 #address-cells = <1>; 1267 #size-cells = <0>; 1268 status = "disabled"; 1269 }; 1270 1271 spi6: spi@4c80000 { 1272 compatible = "qcom,geni-spi"; 1273 reg = <0x0 0x04c80000 0x0 0x4000>; 1274 clock-names = "se"; 1275 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; 1276 interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>; 1277 power-domains = <&rpmpd SM6375_VDDCX>; 1278 operating-points-v2 = <&qup_opp_table>; 1279 dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, 1280 <&gpi_dma1 1 0 QCOM_GPI_SPI>; 1281 dma-names = "tx", "rx"; 1282 #address-cells = <1>; 1283 #size-cells = <0>; 1284 status = "disabled"; 1285 }; 1286 1287 i2c7: i2c@4c84000 { 1288 compatible = "qcom,geni-i2c"; 1289 reg = <0x0 0x04c84000 0x0 0x4000>; 1290 clock-names = "se"; 1291 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; 1292 interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; 1293 dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, 1294 <&gpi_dma1 1 1 QCOM_GPI_I2C>; 1295 dma-names = "tx", "rx"; 1296 #address-cells = <1>; 1297 #size-cells = <0>; 1298 status = "disabled"; 1299 }; 1300 1301 spi7: spi@4c84000 { 1302 compatible = "qcom,geni-spi"; 1303 reg = <0x0 0x04c84000 0x0 0x4000>; 1304 clock-names = "se"; 1305 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; 1306 interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; 1307 power-domains = <&rpmpd SM6375_VDDCX>; 1308 operating-points-v2 = <&qup_opp_table>; 1309 dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, 1310 <&gpi_dma1 1 1 QCOM_GPI_SPI>; 1311 dma-names = "tx", "rx"; 1312 #address-cells = <1>; 1313 #size-cells = <0>; 1314 status = "disabled"; 1315 }; 1316 1317 i2c8: i2c@4c88000 { 1318 compatible = "qcom,geni-i2c"; 1319 reg = <0x0 0x04c88000 0x0 0x4000>; 1320 clock-names = "se"; 1321 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; 1322 interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; 1323 pinctrl-names = "default"; 1324 pinctrl-0 = <&qup_i2c8_default>; 1325 dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, 1326 <&gpi_dma1 1 2 QCOM_GPI_I2C>; 1327 dma-names = "tx", "rx"; 1328 #address-cells = <1>; 1329 #size-cells = <0>; 1330 status = "disabled"; 1331 }; 1332 1333 spi8: spi@4c88000 { 1334 compatible = "qcom,geni-spi"; 1335 reg = <0x0 0x04c88000 0x0 0x4000>; 1336 clock-names = "se"; 1337 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; 1338 interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; 1339 power-domains = <&rpmpd SM6375_VDDCX>; 1340 operating-points-v2 = <&qup_opp_table>; 1341 dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, 1342 <&gpi_dma1 1 2 QCOM_GPI_SPI>; 1343 dma-names = "tx", "rx"; 1344 #address-cells = <1>; 1345 #size-cells = <0>; 1346 status = "disabled"; 1347 }; 1348 1349 i2c9: i2c@4c8c000 { 1350 compatible = "qcom,geni-i2c"; 1351 reg = <0x0 0x04c8c000 0x0 0x4000>; 1352 clock-names = "se"; 1353 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; 1354 interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>; 1355 dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, 1356 <&gpi_dma1 1 3 QCOM_GPI_I2C>; 1357 dma-names = "tx", "rx"; 1358 #address-cells = <1>; 1359 #size-cells = <0>; 1360 status = "disabled"; 1361 }; 1362 1363 spi9: spi@4c8c000 { 1364 compatible = "qcom,geni-spi"; 1365 reg = <0x0 0x04c8c000 0x0 0x4000>; 1366 clock-names = "se"; 1367 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; 1368 interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>; 1369 power-domains = <&rpmpd SM6375_VDDCX>; 1370 operating-points-v2 = <&qup_opp_table>; 1371 dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, 1372 <&gpi_dma1 1 3 QCOM_GPI_SPI>; 1373 dma-names = "tx", "rx"; 1374 #address-cells = <1>; 1375 #size-cells = <0>; 1376 status = "disabled"; 1377 }; 1378 1379 i2c10: i2c@4c90000 { 1380 compatible = "qcom,geni-i2c"; 1381 reg = <0x0 0x04c90000 0x0 0x4000>; 1382 clock-names = "se"; 1383 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; 1384 interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>; 1385 pinctrl-names = "default"; 1386 pinctrl-0 = <&qup_i2c10_default>; 1387 dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, 1388 <&gpi_dma1 1 4 QCOM_GPI_I2C>; 1389 dma-names = "tx", "rx"; 1390 #address-cells = <1>; 1391 #size-cells = <0>; 1392 status = "disabled"; 1393 }; 1394 1395 spi10: spi@4c90000 { 1396 compatible = "qcom,geni-spi"; 1397 reg = <0x0 0x04c90000 0x0 0x4000>; 1398 clock-names = "se"; 1399 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; 1400 interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>; 1401 power-domains = <&rpmpd SM6375_VDDCX>; 1402 operating-points-v2 = <&qup_opp_table>; 1403 dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, 1404 <&gpi_dma1 1 4 QCOM_GPI_SPI>; 1405 dma-names = "tx", "rx"; 1406 #address-cells = <1>; 1407 #size-cells = <0>; 1408 status = "disabled"; 1409 }; 1410 }; 1411 1412 usb_1: usb@4ef8800 { 1413 compatible = "qcom,sm6375-dwc3", "qcom,dwc3"; 1414 reg = <0 0x04ef8800 0 0x400>; 1415 1416 clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, 1417 <&gcc GCC_USB30_PRIM_MASTER_CLK>, 1418 <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, 1419 <&gcc GCC_USB30_PRIM_SLEEP_CLK>, 1420 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, 1421 <&gcc GCC_USB3_PRIM_CLKREF_CLK>; 1422 clock-names = "cfg_noc", 1423 "core", 1424 "iface", 1425 "sleep", 1426 "mock_utmi", 1427 "xo"; 1428 1429 assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, 1430 <&gcc GCC_USB30_PRIM_MASTER_CLK>; 1431 assigned-clock-rates = <19200000>, <133333333>; 1432 1433 interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, 1434 <&intc GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, 1435 <&mpm 94 IRQ_TYPE_EDGE_BOTH>, 1436 <&mpm 93 IRQ_TYPE_EDGE_BOTH>, 1437 <&mpm 12 IRQ_TYPE_LEVEL_HIGH>; 1438 interrupt-names = "pwr_event", 1439 "hs_phy_irq", 1440 "dp_hs_phy_irq", 1441 "dm_hs_phy_irq", 1442 "ss_phy_irq"; 1443 1444 power-domains = <&gcc USB30_PRIM_GDSC>; 1445 1446 resets = <&gcc GCC_USB30_PRIM_BCR>; 1447 1448 /* 1449 * This property is there to allow USB2 to work, as 1450 * USB3 is not implemented yet - (re)move it when 1451 * proper support is in place. 1452 */ 1453 qcom,select-utmi-as-pipe-clk; 1454 1455 #address-cells = <2>; 1456 #size-cells = <2>; 1457 ranges; 1458 1459 status = "disabled"; 1460 1461 usb_1_dwc3: usb@4e00000 { 1462 compatible = "snps,dwc3"; 1463 reg = <0 0x04e00000 0 0xcd00>; 1464 interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; 1465 maximum-speed = "high-speed"; 1466 phys = <&usb_1_hsphy>; 1467 phy-names = "usb2-phy"; 1468 iommus = <&apps_smmu 0xe0 0x0>; 1469 1470 /* Yes, this impl *does* have an unfunny number of quirks.. */ 1471 snps,hird-threshold = /bits/ 8 <0x10>; 1472 snps,usb2-gadget-lpm-disable; 1473 snps,dis_u2_susphy_quirk; 1474 snps,is-utmi-l1-suspend; 1475 snps,dis-u1-entry-quirk; 1476 snps,dis-u2-entry-quirk; 1477 snps,usb3_lpm_capable; 1478 snps,has-lpm-erratum; 1479 tx-fifo-resize; 1480 }; 1481 }; 1482 1483 adreno_smmu: iommu@5940000 { 1484 compatible = "qcom,sm6375-smmu-v2", "qcom,smmu-v2"; 1485 reg = <0 0x05940000 0 0x10000>; 1486 #iommu-cells = <1>; 1487 #global-interrupts = <2>; 1488 interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>, 1489 <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>, 1490 <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, 1491 <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, 1492 <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, 1493 <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, 1494 <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, 1495 <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, 1496 <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, 1497 <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>; 1498 1499 clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>; 1500 clock-names = "bus"; 1501 1502 power-domains = <&gpucc GPU_CX_GDSC>; 1503 }; 1504 1505 gpucc: clock-controller@5990000 { 1506 compatible = "qcom,sm6375-gpucc"; 1507 reg = <0 0x05990000 0 0x9000>; 1508 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, 1509 <&gcc GCC_GPU_GPLL0_CLK_SRC>, 1510 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>, 1511 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; 1512 power-domains = <&rpmpd SM6375_VDDGX>; 1513 required-opps = <&rpmpd_opp_low_svs>; 1514 #clock-cells = <1>; 1515 #reset-cells = <1>; 1516 #power-domain-cells = <1>; 1517 }; 1518 1519 remoteproc_mss: remoteproc@6000000 { 1520 compatible = "qcom,sm6375-mpss-pas"; 1521 reg = <0 0x06000000 0 0x4040>; 1522 1523 interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, 1524 <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, 1525 <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, 1526 <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, 1527 <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, 1528 <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; 1529 interrupt-names = "wdog", 1530 "fatal", 1531 "ready", 1532 "handover", 1533 "stop-ack", 1534 "shutdown-ack"; 1535 1536 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; 1537 clock-names = "xo"; 1538 1539 power-domains = <&rpmpd SM6375_VDDCX>; 1540 power-domain-names = "cx"; 1541 1542 memory-region = <&pil_mpss_wlan_mem>; 1543 1544 qcom,smem-states = <&smp2p_modem_out 0>; 1545 qcom,smem-state-names = "stop"; 1546 1547 status = "disabled"; 1548 1549 glink-edge { 1550 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS 1551 IPCC_MPROC_SIGNAL_GLINK_QMP 1552 IRQ_TYPE_EDGE_RISING>; 1553 mboxes = <&ipcc IPCC_CLIENT_MPSS 1554 IPCC_MPROC_SIGNAL_GLINK_QMP>; 1555 label = "modem"; 1556 qcom,remote-pid = <1>; 1557 }; 1558 }; 1559 1560 remoteproc_adsp: remoteproc@a400000 { 1561 compatible = "qcom,sm6375-adsp-pas"; 1562 reg = <0 0x0a400000 0 0x100>; 1563 1564 interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, 1565 <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, 1566 <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, 1567 <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, 1568 <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; 1569 interrupt-names = "wdog", "fatal", "ready", 1570 "handover", "stop-ack"; 1571 1572 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; 1573 clock-names = "xo"; 1574 1575 power-domains = <&rpmpd SM6375_VDD_LPI_CX>, 1576 <&rpmpd SM6375_VDD_LPI_MX>; 1577 power-domain-names = "lcx", "lmx"; 1578 1579 memory-region = <&pil_adsp_mem>; 1580 1581 qcom,smem-states = <&smp2p_adsp_out 0>; 1582 qcom,smem-state-names = "stop"; 1583 1584 status = "disabled"; 1585 1586 glink-edge { 1587 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS 1588 IPCC_MPROC_SIGNAL_GLINK_QMP 1589 IRQ_TYPE_EDGE_RISING>; 1590 mboxes = <&ipcc IPCC_CLIENT_LPASS 1591 IPCC_MPROC_SIGNAL_GLINK_QMP>; 1592 1593 label = "lpass"; 1594 qcom,remote-pid = <2>; 1595 }; 1596 }; 1597 1598 remoteproc_cdsp: remoteproc@b000000 { 1599 compatible = "qcom,sm6375-cdsp-pas"; 1600 reg = <0x0 0x0b000000 0x0 0x100000>; 1601 1602 interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>, 1603 <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, 1604 <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, 1605 <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, 1606 <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; 1607 interrupt-names = "wdog", "fatal", "ready", 1608 "handover", "stop-ack"; 1609 1610 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; 1611 clock-names = "xo"; 1612 1613 power-domains = <&rpmpd SM6375_VDDCX>; 1614 power-domain-names = "cx"; 1615 1616 memory-region = <&pil_cdsp_mem>; 1617 1618 qcom,smem-states = <&smp2p_cdsp_out 0>; 1619 qcom,smem-state-names = "stop"; 1620 1621 status = "disabled"; 1622 1623 glink-edge { 1624 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP 1625 IPCC_MPROC_SIGNAL_GLINK_QMP 1626 IRQ_TYPE_EDGE_RISING>; 1627 mboxes = <&ipcc IPCC_CLIENT_CDSP 1628 IPCC_MPROC_SIGNAL_GLINK_QMP>; 1629 label = "cdsp"; 1630 qcom,remote-pid = <5>; 1631 }; 1632 }; 1633 1634 sram@c125000 { 1635 compatible = "qcom,sm6375-imem", "syscon", "simple-mfd"; 1636 reg = <0 0x0c125000 0 0x1000>; 1637 ranges = <0 0 0x0c125000 0x1000>; 1638 1639 #address-cells = <1>; 1640 #size-cells = <1>; 1641 1642 pil-reloc@94c { 1643 compatible = "qcom,pil-reloc-info"; 1644 reg = <0x94c 0xc8>; 1645 }; 1646 }; 1647 1648 apps_smmu: iommu@c600000 { 1649 compatible = "qcom,sm6375-smmu-500", "arm,mmu-500"; 1650 reg = <0 0x0c600000 0 0x100000>; 1651 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, 1652 <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, 1653 <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, 1654 <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, 1655 <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, 1656 <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, 1657 <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, 1658 <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, 1659 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, 1660 <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, 1661 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, 1662 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, 1663 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, 1664 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, 1665 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, 1666 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, 1667 <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, 1668 <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, 1669 <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, 1670 <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, 1671 <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, 1672 <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, 1673 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, 1674 <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, 1675 <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, 1676 <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, 1677 <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, 1678 <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, 1679 <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, 1680 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, 1681 <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, 1682 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, 1683 <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, 1684 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, 1685 <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, 1686 <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, 1687 <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, 1688 <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, 1689 <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, 1690 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, 1691 <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, 1692 <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, 1693 <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, 1694 <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, 1695 <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, 1696 <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, 1697 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, 1698 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, 1699 <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, 1700 <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, 1701 <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, 1702 <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, 1703 <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, 1704 <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, 1705 <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, 1706 <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, 1707 <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, 1708 <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, 1709 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, 1710 <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, 1711 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, 1712 <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, 1713 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, 1714 <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, 1715 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; 1716 1717 power-domains = <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_RT_GDSC>, 1718 <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_NRT_GDSC>, 1719 <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>; 1720 #global-interrupts = <1>; 1721 #iommu-cells = <2>; 1722 }; 1723 1724 wifi: wifi@c800000 { 1725 compatible = "qcom,wcn3990-wifi"; 1726 reg = <0 0x0c800000 0 0x800000>; 1727 reg-names = "membase"; 1728 memory-region = <&pil_wlan_mem>; 1729 interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, 1730 <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, 1731 <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, 1732 <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, 1733 <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>, 1734 <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>, 1735 <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>, 1736 <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>, 1737 <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>, 1738 <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>, 1739 <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>, 1740 <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>; 1741 iommus = <&apps_smmu 0x80 0x1>; 1742 qcom,msa-fixed-perm; 1743 status = "disabled"; 1744 }; 1745 1746 intc: interrupt-controller@f200000 { 1747 compatible = "arm,gic-v3"; 1748 reg = <0x0 0x0f200000 0x0 0x10000>, /* GICD */ 1749 <0x0 0x0f240000 0x0 0x100000>; /* GICR * 8 */ 1750 interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>; 1751 #redistributor-regions = <1>; 1752 #interrupt-cells = <3>; 1753 redistributor-stride = <0 0x20000>; 1754 interrupt-controller; 1755 }; 1756 1757 timer@f420000 { 1758 compatible = "arm,armv7-timer-mem"; 1759 reg = <0 0x0f420000 0 0x1000>; 1760 ranges = <0 0 0 0x20000000>; 1761 #address-cells = <1>; 1762 #size-cells = <1>; 1763 1764 frame@f421000 { 1765 reg = <0x0f421000 0x1000>, <0x0f422000 0x1000>; 1766 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, 1767 <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; 1768 frame-number = <0>; 1769 }; 1770 1771 frame@f423000 { 1772 reg = <0x0f243000 0x1000>; 1773 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; 1774 frame-number = <1>; 1775 status = "disabled"; 1776 }; 1777 1778 frame@f425000 { 1779 reg = <0x0f425000 0x1000>; 1780 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 1781 frame-number = <2>; 1782 status = "disabled"; 1783 }; 1784 1785 frame@f427000 { 1786 reg = <0x0f427000 0x1000>; 1787 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 1788 frame-number = <3>; 1789 status = "disabled"; 1790 }; 1791 1792 frame@f429000 { 1793 reg = <0x0f429000 0x1000>; 1794 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; 1795 frame-number = <4>; 1796 status = "disabled"; 1797 }; 1798 1799 frame@f42b000 { 1800 reg = <0x0f42b000 0x1000>; 1801 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; 1802 frame-number = <5>; 1803 status = "disabled"; 1804 }; 1805 1806 frame@f42d000 { 1807 reg = <0x0f42d000 0x1000>; 1808 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 1809 frame-number = <6>; 1810 status = "disabled"; 1811 }; 1812 }; 1813 1814 cpucp_l3: interconnect@fd90000 { 1815 compatible = "qcom,sm6375-cpucp-l3", "qcom,epss-l3"; 1816 reg = <0 0x0fd90000 0 0x1000>; 1817 1818 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; 1819 clock-names = "xo", "alternate"; 1820 #interconnect-cells = <1>; 1821 }; 1822 1823 cpufreq_hw: cpufreq@fd91000 { 1824 compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss"; 1825 reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>; 1826 reg-names = "freq-domain0", "freq-domain1"; 1827 1828 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>; 1829 clock-names = "xo", "alternate"; 1830 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, 1831 <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; 1832 interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1"; 1833 #freq-domain-cells = <1>; 1834 #clock-cells = <1>; 1835 }; 1836 }; 1837 1838 thermal-zones { 1839 mapss0-thermal { 1840 thermal-sensors = <&tsens0 0>; 1841 1842 trips { 1843 mapss0_alert0: trip-point0 { 1844 temperature = <90000>; 1845 hysteresis = <2000>; 1846 type = "passive"; 1847 }; 1848 1849 mapss0_alert1: trip-point1 { 1850 temperature = <95000>; 1851 hysteresis = <2000>; 1852 type = "passive"; 1853 }; 1854 1855 mapss0_crit: mapss-crit { 1856 temperature = <110000>; 1857 hysteresis = <1000>; 1858 type = "critical"; 1859 }; 1860 }; 1861 }; 1862 1863 cpu0-thermal { 1864 thermal-sensors = <&tsens0 1>; 1865 1866 trips { 1867 cpu0_alert0: trip-point0 { 1868 temperature = <90000>; 1869 hysteresis = <2000>; 1870 type = "passive"; 1871 }; 1872 1873 cpu0_alert1: trip-point1 { 1874 temperature = <95000>; 1875 hysteresis = <2000>; 1876 type = "passive"; 1877 }; 1878 1879 cpu0_crit: cpu-crit { 1880 temperature = <110000>; 1881 hysteresis = <1000>; 1882 type = "critical"; 1883 }; 1884 }; 1885 }; 1886 1887 cpu1-thermal { 1888 thermal-sensors = <&tsens0 2>; 1889 1890 trips { 1891 cpu1_alert0: trip-point0 { 1892 temperature = <90000>; 1893 hysteresis = <2000>; 1894 type = "passive"; 1895 }; 1896 1897 cpu1_alert1: trip-point1 { 1898 temperature = <95000>; 1899 hysteresis = <2000>; 1900 type = "passive"; 1901 }; 1902 1903 cpu1_crit: cpu-crit { 1904 temperature = <110000>; 1905 hysteresis = <1000>; 1906 type = "critical"; 1907 }; 1908 }; 1909 }; 1910 1911 cpu2-thermal { 1912 thermal-sensors = <&tsens0 3>; 1913 1914 trips { 1915 cpu2_alert0: trip-point0 { 1916 temperature = <90000>; 1917 hysteresis = <2000>; 1918 type = "passive"; 1919 }; 1920 1921 cpu2_alert1: trip-point1 { 1922 temperature = <95000>; 1923 hysteresis = <2000>; 1924 type = "passive"; 1925 }; 1926 1927 cpu2_crit: cpu-crit { 1928 temperature = <110000>; 1929 hysteresis = <1000>; 1930 type = "critical"; 1931 }; 1932 }; 1933 }; 1934 1935 cpu3-thermal { 1936 thermal-sensors = <&tsens0 4>; 1937 1938 trips { 1939 cpu3_alert0: trip-point0 { 1940 temperature = <90000>; 1941 hysteresis = <2000>; 1942 type = "passive"; 1943 }; 1944 1945 cpu3_alert1: trip-point1 { 1946 temperature = <95000>; 1947 hysteresis = <2000>; 1948 type = "passive"; 1949 }; 1950 1951 cpu3_crit: cpu-crit { 1952 temperature = <110000>; 1953 hysteresis = <1000>; 1954 type = "critical"; 1955 }; 1956 }; 1957 }; 1958 1959 cpu4-thermal { 1960 thermal-sensors = <&tsens0 5>; 1961 1962 trips { 1963 cpu4_alert0: trip-point0 { 1964 temperature = <90000>; 1965 hysteresis = <2000>; 1966 type = "passive"; 1967 }; 1968 1969 cpu4_alert1: trip-point1 { 1970 temperature = <95000>; 1971 hysteresis = <2000>; 1972 type = "passive"; 1973 }; 1974 1975 cpu4_crit: cpu-crit { 1976 temperature = <110000>; 1977 hysteresis = <1000>; 1978 type = "critical"; 1979 }; 1980 }; 1981 }; 1982 1983 cpu5-thermal { 1984 thermal-sensors = <&tsens0 6>; 1985 1986 trips { 1987 cpu5_alert0: trip-point0 { 1988 temperature = <90000>; 1989 hysteresis = <2000>; 1990 type = "passive"; 1991 }; 1992 1993 cpu5_alert1: trip-point1 { 1994 temperature = <95000>; 1995 hysteresis = <2000>; 1996 type = "passive"; 1997 }; 1998 1999 cpu5_crit: cpu-crit { 2000 temperature = <110000>; 2001 hysteresis = <1000>; 2002 type = "critical"; 2003 }; 2004 }; 2005 }; 2006 2007 cluster0-thermal { 2008 thermal-sensors = <&tsens0 7>; 2009 2010 trips { 2011 cluster0_alert0: trip-point0 { 2012 temperature = <90000>; 2013 hysteresis = <2000>; 2014 type = "passive"; 2015 }; 2016 2017 cluster0_alert1: trip-point1 { 2018 temperature = <95000>; 2019 hysteresis = <2000>; 2020 type = "passive"; 2021 }; 2022 2023 cluster0_crit: cpu-crit { 2024 temperature = <110000>; 2025 hysteresis = <1000>; 2026 type = "critical"; 2027 }; 2028 }; 2029 }; 2030 2031 cluster1-thermal { 2032 thermal-sensors = <&tsens0 8>; 2033 2034 trips { 2035 cluster1_alert0: trip-point0 { 2036 temperature = <90000>; 2037 hysteresis = <2000>; 2038 type = "passive"; 2039 }; 2040 2041 cluster1_alert1: trip-point1 { 2042 temperature = <95000>; 2043 hysteresis = <2000>; 2044 type = "passive"; 2045 }; 2046 2047 cluster1_crit: cpu-crit { 2048 temperature = <110000>; 2049 hysteresis = <1000>; 2050 type = "critical"; 2051 }; 2052 }; 2053 }; 2054 2055 cpu6-thermal { 2056 thermal-sensors = <&tsens0 9>; 2057 2058 trips { 2059 cpu6_alert0: trip-point0 { 2060 temperature = <90000>; 2061 hysteresis = <2000>; 2062 type = "passive"; 2063 }; 2064 2065 cpu6_alert1: trip-point1 { 2066 temperature = <95000>; 2067 hysteresis = <2000>; 2068 type = "passive"; 2069 }; 2070 2071 cpu6_crit: cpu-crit { 2072 temperature = <110000>; 2073 hysteresis = <1000>; 2074 type = "critical"; 2075 }; 2076 }; 2077 }; 2078 2079 cpu7-thermal { 2080 thermal-sensors = <&tsens0 10>; 2081 2082 trips { 2083 cpu7_alert0: trip-point0 { 2084 temperature = <90000>; 2085 hysteresis = <2000>; 2086 type = "passive"; 2087 }; 2088 2089 cpu7_alert1: trip-point1 { 2090 temperature = <95000>; 2091 hysteresis = <2000>; 2092 type = "passive"; 2093 }; 2094 2095 cpu7_crit: cpu-crit { 2096 temperature = <110000>; 2097 hysteresis = <1000>; 2098 type = "critical"; 2099 }; 2100 }; 2101 }; 2102 2103 cpu-unk0-thermal { 2104 thermal-sensors = <&tsens0 11>; 2105 2106 trips { 2107 cpu_unk0_alert0: trip-point0 { 2108 temperature = <90000>; 2109 hysteresis = <2000>; 2110 type = "passive"; 2111 }; 2112 2113 cpu_unk0_alert1: trip-point1 { 2114 temperature = <95000>; 2115 hysteresis = <2000>; 2116 type = "passive"; 2117 }; 2118 2119 cpu_unk0_crit: cpu-crit { 2120 temperature = <110000>; 2121 hysteresis = <1000>; 2122 type = "critical"; 2123 }; 2124 }; 2125 }; 2126 2127 cpu-unk1-thermal { 2128 thermal-sensors = <&tsens0 12>; 2129 2130 trips { 2131 cpu_unk1_alert0: trip-point0 { 2132 temperature = <90000>; 2133 hysteresis = <2000>; 2134 type = "passive"; 2135 }; 2136 2137 cpu_unk1_alert1: trip-point1 { 2138 temperature = <95000>; 2139 hysteresis = <2000>; 2140 type = "passive"; 2141 }; 2142 2143 cpu_unk1_crit: cpu-crit { 2144 temperature = <110000>; 2145 hysteresis = <1000>; 2146 type = "critical"; 2147 }; 2148 }; 2149 }; 2150 2151 gpuss0-thermal { 2152 thermal-sensors = <&tsens0 13>; 2153 2154 trips { 2155 gpuss0_alert0: trip-point0 { 2156 temperature = <90000>; 2157 hysteresis = <2000>; 2158 type = "passive"; 2159 }; 2160 2161 gpuss0_alert1: trip-point1 { 2162 temperature = <95000>; 2163 hysteresis = <2000>; 2164 type = "passive"; 2165 }; 2166 2167 gpuss0_crit: gpu-crit { 2168 temperature = <110000>; 2169 hysteresis = <1000>; 2170 type = "critical"; 2171 }; 2172 }; 2173 }; 2174 2175 gpuss1-thermal { 2176 thermal-sensors = <&tsens0 14>; 2177 2178 trips { 2179 gpuss1_alert0: trip-point0 { 2180 temperature = <90000>; 2181 hysteresis = <2000>; 2182 type = "passive"; 2183 }; 2184 2185 gpuss1_alert1: trip-point1 { 2186 temperature = <95000>; 2187 hysteresis = <2000>; 2188 type = "passive"; 2189 }; 2190 2191 gpuss1_crit: gpu-crit { 2192 temperature = <110000>; 2193 hysteresis = <1000>; 2194 type = "critical"; 2195 }; 2196 }; 2197 }; 2198 2199 mapss1-thermal { 2200 thermal-sensors = <&tsens1 0>; 2201 2202 trips { 2203 mapss1_alert0: trip-point0 { 2204 temperature = <90000>; 2205 hysteresis = <2000>; 2206 type = "passive"; 2207 }; 2208 2209 mapss1_alert1: trip-point1 { 2210 temperature = <95000>; 2211 hysteresis = <2000>; 2212 type = "passive"; 2213 }; 2214 2215 mapss1_crit: mapss-crit { 2216 temperature = <110000>; 2217 hysteresis = <1000>; 2218 type = "critical"; 2219 }; 2220 }; 2221 }; 2222 2223 cwlan-thermal { 2224 thermal-sensors = <&tsens1 1>; 2225 2226 trips { 2227 cwlan_alert0: trip-point0 { 2228 temperature = <90000>; 2229 hysteresis = <2000>; 2230 type = "passive"; 2231 }; 2232 2233 cwlan_alert1: trip-point1 { 2234 temperature = <95000>; 2235 hysteresis = <2000>; 2236 type = "passive"; 2237 }; 2238 2239 cwlan_crit: cwlan-crit { 2240 temperature = <110000>; 2241 hysteresis = <1000>; 2242 type = "critical"; 2243 }; 2244 }; 2245 }; 2246 2247 audio-thermal { 2248 thermal-sensors = <&tsens1 2>; 2249 2250 trips { 2251 audio_alert0: trip-point0 { 2252 temperature = <90000>; 2253 hysteresis = <2000>; 2254 type = "passive"; 2255 }; 2256 2257 audio_alert1: trip-point1 { 2258 temperature = <95000>; 2259 hysteresis = <2000>; 2260 type = "passive"; 2261 }; 2262 2263 audio_crit: audio-crit { 2264 temperature = <110000>; 2265 hysteresis = <1000>; 2266 type = "critical"; 2267 }; 2268 }; 2269 }; 2270 2271 ddr-thermal { 2272 thermal-sensors = <&tsens1 3>; 2273 2274 trips { 2275 ddr_alert0: trip-point0 { 2276 temperature = <90000>; 2277 hysteresis = <2000>; 2278 type = "passive"; 2279 }; 2280 2281 ddr_alert1: trip-point1 { 2282 temperature = <95000>; 2283 hysteresis = <2000>; 2284 type = "passive"; 2285 }; 2286 2287 ddr_crit: ddr-crit { 2288 temperature = <110000>; 2289 hysteresis = <1000>; 2290 type = "critical"; 2291 }; 2292 }; 2293 }; 2294 2295 q6hvx-thermal { 2296 thermal-sensors = <&tsens1 4>; 2297 2298 trips { 2299 q6hvx_alert0: trip-point0 { 2300 temperature = <90000>; 2301 hysteresis = <2000>; 2302 type = "passive"; 2303 }; 2304 2305 q6hvx_alert1: trip-point1 { 2306 temperature = <95000>; 2307 hysteresis = <2000>; 2308 type = "passive"; 2309 }; 2310 2311 q6hvx_crit: q6hvx-crit { 2312 temperature = <110000>; 2313 hysteresis = <1000>; 2314 type = "critical"; 2315 }; 2316 }; 2317 }; 2318 2319 camera-thermal { 2320 thermal-sensors = <&tsens1 5>; 2321 2322 trips { 2323 camera_alert0: trip-point0 { 2324 temperature = <90000>; 2325 hysteresis = <2000>; 2326 type = "passive"; 2327 }; 2328 2329 camera_alert1: trip-point1 { 2330 temperature = <95000>; 2331 hysteresis = <2000>; 2332 type = "passive"; 2333 }; 2334 2335 camera_crit: camera-crit { 2336 temperature = <110000>; 2337 hysteresis = <1000>; 2338 type = "critical"; 2339 }; 2340 }; 2341 }; 2342 2343 mdm-core0-thermal { 2344 thermal-sensors = <&tsens1 6>; 2345 2346 trips { 2347 mdm_core0_alert0: trip-point0 { 2348 temperature = <90000>; 2349 hysteresis = <2000>; 2350 type = "passive"; 2351 }; 2352 2353 mdm_core0_alert1: trip-point1 { 2354 temperature = <95000>; 2355 hysteresis = <2000>; 2356 type = "passive"; 2357 }; 2358 2359 mdm_core0_crit: mdm-core0-crit { 2360 temperature = <110000>; 2361 hysteresis = <1000>; 2362 type = "critical"; 2363 }; 2364 }; 2365 }; 2366 2367 mdm-core1-thermal { 2368 thermal-sensors = <&tsens1 7>; 2369 2370 trips { 2371 mdm_core1_alert0: trip-point0 { 2372 temperature = <90000>; 2373 hysteresis = <2000>; 2374 type = "passive"; 2375 }; 2376 2377 mdm_core1_alert1: trip-point1 { 2378 temperature = <95000>; 2379 hysteresis = <2000>; 2380 type = "passive"; 2381 }; 2382 2383 mdm_core1_crit: mdm-core1-crit { 2384 temperature = <110000>; 2385 hysteresis = <1000>; 2386 type = "critical"; 2387 }; 2388 }; 2389 }; 2390 2391 mdm-vec-thermal { 2392 thermal-sensors = <&tsens1 8>; 2393 2394 trips { 2395 mdm_vec_alert0: trip-point0 { 2396 temperature = <90000>; 2397 hysteresis = <2000>; 2398 type = "passive"; 2399 }; 2400 2401 mdm_vec_alert1: trip-point1 { 2402 temperature = <95000>; 2403 hysteresis = <2000>; 2404 type = "passive"; 2405 }; 2406 2407 mdm_vec_crit: mdm-vec-crit { 2408 temperature = <110000>; 2409 hysteresis = <1000>; 2410 type = "critical"; 2411 }; 2412 }; 2413 }; 2414 2415 msm-scl-thermal { 2416 thermal-sensors = <&tsens1 9>; 2417 2418 trips { 2419 msm_scl_alert0: trip-point0 { 2420 temperature = <90000>; 2421 hysteresis = <2000>; 2422 type = "passive"; 2423 }; 2424 2425 msm_scl_alert1: trip-point1 { 2426 temperature = <95000>; 2427 hysteresis = <2000>; 2428 type = "passive"; 2429 }; 2430 2431 msm_scl_crit: msm-scl-crit { 2432 temperature = <110000>; 2433 hysteresis = <1000>; 2434 type = "critical"; 2435 }; 2436 }; 2437 }; 2438 2439 video-thermal { 2440 thermal-sensors = <&tsens1 10>; 2441 2442 trips { 2443 video_alert0: trip-point0 { 2444 temperature = <90000>; 2445 hysteresis = <2000>; 2446 type = "passive"; 2447 }; 2448 2449 video_alert1: trip-point1 { 2450 temperature = <95000>; 2451 hysteresis = <2000>; 2452 type = "passive"; 2453 }; 2454 2455 video_crit: video-crit { 2456 temperature = <110000>; 2457 hysteresis = <1000>; 2458 type = "critical"; 2459 }; 2460 }; 2461 }; 2462 }; 2463 2464 timer { 2465 compatible = "arm,armv8-timer"; 2466 interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 2467 <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 2468 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, 2469 <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; 2470 }; 2471}; 2472