1// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) 2/* 3 * Copyright (c) 2023, Dang Huynh <danct12@riseup.net> 4 */ 5 6/dts-v1/; 7 8#include "sm6115.dtsi" 9#include "pm6125.dtsi" 10#include <dt-bindings/arm/qcom,ids.h> 11 12/ { 13 model = "F(x)tec Pro1X (QX1050)"; 14 compatible = "fxtec,pro1x", "qcom,sm6115"; 15 chassis-type = "handset"; 16 17 qcom,msm-id = <QCOM_ID_SM6115 0x10000>; 18 19 chosen { 20 #address-cells = <2>; 21 #size-cells = <2>; 22 ranges; 23 24 framebuffer0: framebuffer@5c000000 { 25 compatible = "simple-framebuffer"; 26 reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>; 27 width = <1080>; 28 height = <2160>; 29 stride = <(1080 * 4)>; 30 format = "a8r8g8b8"; 31 clocks = <&gcc GCC_DISP_HF_AXI_CLK>; 32 }; 33 }; 34 35 gpio-keys { 36 compatible = "gpio-keys"; 37 38 pinctrl-0 = <&vol_up_n>; 39 pinctrl-names = "default"; 40 41 key-volume-up { 42 label = "Volume Up"; 43 linux,code = <KEY_VOLUMEUP>; 44 gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; 45 debounce-interval = <15>; 46 linux,can-disable; 47 wakeup-source; 48 }; 49 }; 50}; 51 52&dispcc { 53 /* HACK: disable until a panel driver is ready to retain simplefb */ 54 status = "disabled"; 55}; 56 57&pm6125_gpios { 58 vol_up_n: vol-up-n-state { 59 pins = "gpio5"; 60 function = "normal"; 61 power-source = <0>; 62 bias-pull-up; 63 input-enable; 64 }; 65}; 66 67&pon_pwrkey { 68 status = "okay"; 69}; 70 71&pon_resin { 72 linux,code = <KEY_VOLUMEDOWN>; 73 status = "okay"; 74}; 75 76&rpm_requests { 77 regulators-0 { 78 compatible = "qcom,rpm-pm6125-regulators"; 79 80 pm6125_s6a: s6 { 81 regulator-min-microvolt = <304000>; 82 regulator-max-microvolt = <1456000>; 83 }; 84 85 pm6125_s7a: s7 { 86 regulator-min-microvolt = <1280000>; 87 regulator-max-microvolt = <2040000>; 88 }; 89 90 pm6125_s8a: s8 { 91 regulator-min-microvolt = <1064000>; 92 regulator-max-microvolt = <1304000>; 93 }; 94 95 pm6125_l1a: l1 { 96 regulator-min-microvolt = <952000>; 97 regulator-max-microvolt = <1152000>; 98 }; 99 100 pm6125_l4a: l4 { 101 regulator-min-microvolt = <488000>; 102 regulator-max-microvolt = <1000000>; 103 }; 104 105 pm6125_l5a: l5 { 106 regulator-min-microvolt = <1648000>; 107 regulator-max-microvolt = <3056000>; 108 }; 109 110 pm6125_l6a: l6 { 111 regulator-min-microvolt = <576000>; 112 regulator-max-microvolt = <656000>; 113 }; 114 115 pm6125_l7a: l7 { 116 regulator-min-microvolt = <1200000>; 117 regulator-max-microvolt = <1304000>; 118 }; 119 120 pm6125_l8a: l8 { 121 regulator-min-microvolt = <400000>; 122 regulator-max-microvolt = <728000>; 123 }; 124 125 pm6125_l9a: l9 { 126 regulator-min-microvolt = <1800000>; 127 regulator-max-microvolt = <2000000>; 128 }; 129 130 pm6125_l10a: l10 { 131 regulator-min-microvolt = <1704000>; 132 regulator-max-microvolt = <1904000>; 133 }; 134 135 pm6125_l11a: l11 { 136 regulator-min-microvolt = <1704000>; 137 regulator-max-microvolt = <1952000>; 138 regulator-allow-set-load; 139 }; 140 141 pm6125_l12a: l12 { 142 regulator-min-microvolt = <1624000>; 143 regulator-max-microvolt = <1984000>; 144 }; 145 146 pm6125_l13a: l13 { 147 regulator-min-microvolt = <1504000>; 148 regulator-max-microvolt = <1952000>; 149 }; 150 151 pm6125_l14a: l14 { 152 regulator-min-microvolt = <1704000>; 153 regulator-max-microvolt = <1904000>; 154 }; 155 156 pm6125_l15a: l15 { 157 regulator-min-microvolt = <2920000>; 158 regulator-max-microvolt = <3232000>; 159 }; 160 161 pm6125_l16a: l16 { 162 regulator-min-microvolt = <1704000>; 163 regulator-max-microvolt = <1904000>; 164 }; 165 166 pm6125_l17a: l17 { 167 regulator-min-microvolt = <1152000>; 168 regulator-max-microvolt = <1384000>; 169 }; 170 171 pm6125_l18a: l18 { 172 regulator-min-microvolt = <1104000>; 173 regulator-max-microvolt = <1312000>; 174 }; 175 176 pm6125_l19a: l19 { 177 regulator-min-microvolt = <1624000>; 178 regulator-max-microvolt = <3304000>; 179 }; 180 181 pm6125_l20a: l20 { 182 regulator-min-microvolt = <1624000>; 183 regulator-max-microvolt = <3304000>; 184 }; 185 186 pm6125_l21a: l21 { 187 regulator-min-microvolt = <2400000>; 188 regulator-max-microvolt = <3600000>; 189 }; 190 191 pm6125_l22a: l22 { 192 regulator-min-microvolt = <2952000>; 193 regulator-max-microvolt = <3304000>; 194 }; 195 196 pm6125_l23a: l23 { 197 regulator-min-microvolt = <3200000>; 198 regulator-max-microvolt = <3400000>; 199 }; 200 201 pm6125_l24a: l24 { 202 regulator-min-microvolt = <2704000>; 203 regulator-max-microvolt = <3600000>; 204 regulator-allow-set-load; 205 }; 206 }; 207}; 208 209&sleep_clk { 210 clock-frequency = <32764>; 211}; 212 213&tlmm { 214 gpio-reserved-ranges = <0 4>, <14 4>; 215}; 216 217&ufs_mem_hc { 218 vcc-supply = <&pm6125_l24a>; 219 vcc-max-microamp = <600000>; 220 vccq2-supply = <&pm6125_l11a>; 221 vccq2-max-microamp = <600000>; 222 vdd-hba-supply = <&pm6125_l18a>; 223 status = "okay"; 224}; 225 226&ufs_mem_phy { 227 vdda-phy-supply = <&pm6125_l4a>; 228 vdda-pll-supply = <&pm6125_l12a>; 229 status = "okay"; 230}; 231 232&usb { 233 status = "okay"; 234}; 235 236&usb_dwc3 { 237 maximum-speed = "high-speed"; 238 dr_mode = "peripheral"; 239}; 240 241&usb_hsphy { 242 vdd-supply = <&pm6125_l4a>; 243 vdda-pll-supply = <&pm6125_l12a>; 244 vdda-phy-dpdm-supply = <&pm6125_l15a>; 245 status = "okay"; 246}; 247 248&xo_board { 249 clock-frequency = <19200000>; 250}; 251