1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz> 4 */ 5/dts-v1/; 6 7#include "sdm632.dtsi" 8#include "pm8953.dtsi" 9 10/ { 11 model = "Fairphone 3"; 12 compatible = "fairphone,fp3", "qcom,sdm632"; 13 chassis-type = "handset"; 14 qcom,msm-id = <349 0>; 15 qcom,board-id = <8 0x10000>; 16 17 aliases { 18 mmc0 = &sdhc_1; 19 mmc1 = &sdhc_2; 20 serial0 = &uart_0; 21 }; 22 23 chosen { 24 stdout-path = "serial0:115200n8"; 25 }; 26 27 gpio-keys { 28 compatible = "gpio-keys"; 29 30 volume-up { 31 label = "volume_up"; 32 linux,code = <KEY_VOLUMEUP>; 33 gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; 34 }; 35 }; 36 37 vph_pwr: vph-pwr-regulator { 38 compatible = "regulator-fixed"; 39 regulator-name = "vph_pwr"; 40 regulator-always-on; 41 regulator-boot-on; 42 }; 43}; 44 45&hsusb_phy { 46 status = "okay"; 47 vdd-supply = <&pm8953_l3>; 48 vdda-pll-supply = <&pm8953_l7>; 49 vdda-phy-dpdm-supply = <&pm8953_l13>; 50}; 51 52&pm8953_resin { 53 status = "okay"; 54 linux,code = <KEY_VOLUMEDOWN>; 55}; 56 57&sdhc_1 { 58 status = "okay"; 59 vmmc-supply = <&pm8953_l8>; 60 vqmmc-supply = <&pm8953_l5>; 61}; 62 63&sdhc_2 { 64 status = "okay"; 65 vmmc-supply = <&pm8953_l11>; 66 vqmmc-supply = <&pm8953_l12>; 67 68 cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; 69}; 70 71&rpm_requests { 72 pm8953-regulators { 73 compatible = "qcom,rpm-pm8953-regulators"; 74 75 vdd_l1-supply = <&pm8953_s3>; 76 vdd_l2_l3-supply = <&pm8953_s3>; 77 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; 78 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; 79 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; 80 81 pm8953_s3: s3 { 82 regulator-min-microvolt = <984000>; 83 regulator-max-microvolt = <1240000>; 84 }; 85 pm8953_s4: s4 { 86 regulator-min-microvolt = <1036000>; 87 regulator-max-microvolt = <2040000>; 88 }; 89 pm8953_s5: s5 { 90 regulator-min-microvolt = <1036000>; 91 regulator-max-microvolt = <2040000>; 92 }; 93 94 pm8953_l1: l1 { 95 regulator-min-microvolt = <975000>; 96 regulator-max-microvolt = <1050000>; 97 }; 98 pm8953_l2: l2 { 99 regulator-min-microvolt = <975000>; 100 regulator-max-microvolt = <1175000>; 101 }; 102 pm8953_l3: l3 { 103 regulator-min-microvolt = <925000>; 104 regulator-max-microvolt = <925000>; 105 }; 106 pm8953_l5: l5 { 107 regulator-min-microvolt = <1800000>; 108 regulator-max-microvolt = <1800000>; 109 }; 110 pm8953_l6: l6 { 111 regulator-min-microvolt = <1800000>; 112 regulator-max-microvolt = <1800000>; 113 }; 114 pm8953_l7: l7 { 115 regulator-min-microvolt = <1800000>; 116 regulator-max-microvolt = <1900000>; 117 }; 118 pm8953_l8: l8 { 119 regulator-min-microvolt = <2900000>; 120 regulator-max-microvolt = <2900000>; 121 }; 122 pm8953_l9: l9 { 123 regulator-min-microvolt = <3000000>; 124 regulator-max-microvolt = <3300000>; 125 }; 126 pm8953_l10: l10 { 127 regulator-min-microvolt = <2800000>; 128 regulator-max-microvolt = <3000000>; 129 }; 130 pm8953_l11: l11 { 131 regulator-min-microvolt = <2950000>; 132 regulator-max-microvolt = <2950000>; 133 }; 134 pm8953_l12: l12 { 135 regulator-min-microvolt = <1800000>; 136 regulator-max-microvolt = <2950000>; 137 }; 138 pm8953_l13: l13 { 139 regulator-min-microvolt = <3125000>; 140 regulator-max-microvolt = <3125000>; 141 }; 142 pm8953_l16: l16 { 143 regulator-min-microvolt = <1800000>; 144 regulator-max-microvolt = <1800000>; 145 }; 146 pm8953_l17: l17 { 147 regulator-min-microvolt = <2850000>; 148 regulator-max-microvolt = <2850000>; 149 }; 150 pm8953_l19: l19 { 151 regulator-min-microvolt = <1200000>; 152 regulator-max-microvolt = <1350000>; 153 }; 154 pm8953_l22: l22 { 155 regulator-min-microvolt = <2800000>; 156 regulator-max-microvolt = <2800000>; 157 }; 158 pm8953_l23: l23 { 159 regulator-min-microvolt = <975000>; 160 regulator-max-microvolt = <1225000>; 161 }; 162 }; 163}; 164 165&tlmm { 166 /* 167 * 0-3: unused but protected by TZ 168 * 135-138: fingerprint reader (SPI) 169 */ 170 gpio-reserved-ranges = <0 4>, <135 4>; 171}; 172 173&uart_0 { 174 status = "okay"; 175}; 176 177&usb3 { 178 status = "okay"; 179}; 180 181&usb3_dwc3 { 182 dr_mode = "peripheral"; 183}; 184