1// SPDX-License-Identifier: BSD-3-Clause 2/* 3 * Copyright (c) 2022, Julian Braha <julianbraha@gmail.com> 4 */ 5/dts-v1/; 6 7#include "sdm450.dtsi" 8#include "pm8953.dtsi" 9#include "pmi8950.dtsi" 10 11/delete-node/ &qseecom_mem; 12 13/ { 14 model = "Motorola Moto G6"; 15 compatible = "motorola,ali", "qcom,sdm450"; 16 chassis-type = "handset"; 17 qcom,msm-id = <338 0>; 18 qcom,board-id = <0x43 0xc200>; 19 20 gpio-keys { 21 compatible = "gpio-keys"; 22 23 key-volume-up { 24 label = "volume_up"; 25 gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; 26 linux,code = <KEY_VOLUMEUP>; 27 }; 28 }; 29 30 reserved-memory { 31 qseecom_mem: qseecom@84300000 { 32 reg = <0x0 0x84300000 0x0 0x2000000>; 33 no-map; 34 }; 35 36 ramoops@ef000000 { 37 compatible = "ramoops"; 38 reg = <0x0 0xef000000 0x0 0xc0000>; 39 console-size = <0x40000>; 40 }; 41 }; 42 43 vph_pwr: vph-pwr-regulator { 44 compatible = "regulator-fixed"; 45 regulator-name = "vph_pwr"; 46 regulator-always-on; 47 regulator-boot-on; 48 }; 49}; 50 51&hsusb_phy { 52 vdd-supply = <&pm8953_l3>; 53 vdda-pll-supply = <&pm8953_l7>; 54 vdda-phy-dpdm-supply = <&pm8953_l13>; 55 56 status = "okay"; 57}; 58 59&i2c_3 { 60 status = "okay"; 61 62 touchscreen@38 { 63 compatible = "edt,edt-ft5406"; 64 reg = <0x38>; 65 interrupt-parent = <&tlmm>; 66 interrupts = <65 IRQ_TYPE_EDGE_FALLING>; 67 vcc-supply = <&pm8953_l10>; 68 69 pinctrl-names = "default"; 70 pinctrl-0 = <&ts_int_active &ts_reset_active>; 71 72 reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; 73 touchscreen-size-x = <1080>; 74 touchscreen-size-y = <2160>; 75 }; 76}; 77 78&pm8953_resin { 79 linux,code = <KEY_VOLUMEDOWN>; 80 status = "okay"; 81}; 82 83&pmi8950_wled { 84 qcom,num-strings = <3>; 85 qcom,external-pfet; 86 qcom,cabc; 87 88 status = "okay"; 89}; 90 91&rpm_requests { 92 regulators { 93 compatible = "qcom,rpm-pm8953-regulators"; 94 95 vdd_s1-supply = <&vph_pwr>; 96 vdd_s2-supply = <&vph_pwr>; 97 vdd_s3-supply = <&vph_pwr>; 98 vdd_s4-supply = <&vph_pwr>; 99 vdd_s5-supply = <&vph_pwr>; 100 vdd_s6-supply = <&vph_pwr>; 101 vdd_s7-supply = <&vph_pwr>; 102 vdd_l1-supply = <&pm8953_s3>; 103 vdd_l2_l3-supply = <&pm8953_s3>; 104 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; 105 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; 106 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; 107 108 pm8953_s1: s1 { 109 regulator-min-microvolt = <795000>; 110 regulator-max-microvolt = <1081000>; 111 }; 112 113 pm8953_s3: s3 { 114 regulator-min-microvolt = <1224000>; 115 regulator-max-microvolt = <1224000>; 116 }; 117 118 pm8953_s4: s4 { 119 regulator-min-microvolt = <1900000>; 120 regulator-max-microvolt = <2050000>; 121 }; 122 123 pm8953_l1: l1 { 124 regulator-min-microvolt = <1000000>; 125 regulator-max-microvolt = <1100000>; 126 }; 127 128 pm8953_l2: l2 { 129 regulator-min-microvolt = <975000>; 130 regulator-max-microvolt = <1225000>; 131 }; 132 133 pm8953_l3: l3 { 134 regulator-min-microvolt = <925000>; 135 regulator-max-microvolt = <925000>; 136 }; 137 138 pm8953_l5: l5 { 139 regulator-min-microvolt = <1800000>; 140 regulator-max-microvolt = <1800000>; 141 }; 142 143 pm8953_l6: l6 { 144 regulator-min-microvolt = <1800000>; 145 regulator-max-microvolt = <1800000>; 146 }; 147 148 pm8953_l7: l7 { 149 regulator-min-microvolt = <1800000>; 150 regulator-max-microvolt = <1900000>; 151 }; 152 153 pm8953_l8: l8 { 154 regulator-min-microvolt = <2900000>; 155 regulator-max-microvolt = <2900000>; 156 }; 157 158 pm8953_l9: l9 { 159 regulator-min-microvolt = <3000000>; 160 regulator-max-microvolt = <3300000>; 161 }; 162 163 pm8953_l10: l10 { 164 regulator-min-microvolt = <2850000>; 165 regulator-max-microvolt = <2850000>; 166 }; 167 168 pm8953_l11: l11 { 169 regulator-min-microvolt = <2950000>; 170 regulator-max-microvolt = <2950000>; 171 }; 172 173 pm8953_l12: l12 { 174 regulator-min-microvolt = <1800000>; 175 regulator-max-microvolt = <2950000>; 176 }; 177 178 pm8953_l13: l13 { 179 regulator-min-microvolt = <3125000>; 180 regulator-max-microvolt = <3125000>; 181 }; 182 183 pm8953_l16: l16 { 184 regulator-min-microvolt = <1800000>; 185 regulator-max-microvolt = <1800000>; 186 }; 187 188 pm8953_l17: l17 { 189 regulator-min-microvolt = <2850000>; 190 regulator-max-microvolt = <2850000>; 191 }; 192 193 pm8953_l19: l19 { 194 regulator-min-microvolt = <1200000>; 195 regulator-max-microvolt = <1350000>; 196 }; 197 198 pm8953_l22: l22 { 199 regulator-min-microvolt = <2800000>; 200 regulator-max-microvolt = <2850000>; 201 }; 202 203 pm8953_l23: l23 { 204 regulator-min-microvolt = <975000>; 205 regulator-max-microvolt = <1225000>; 206 }; 207 }; 208}; 209 210&sdhc_1 { 211 vmmc-supply = <&pm8953_l8>; 212 vqmmc-supply = <&pm8953_l5>; 213 214 status = "okay"; 215}; 216 217&sdhc_2 { 218 vmmc-supply = <&pm8953_l11>; 219 vqmmc-supply = <&pm8953_l12>; 220 221 pinctrl-names = "default", "sleep"; 222 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>; 223 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; 224 225 status = "okay"; 226}; 227 228&tlmm { 229 gpio-reserved-ranges = <95 5>, <111 1>, <126 1>; 230 231 ts_int_active: ts-int-active-state { 232 pins = "gpio65"; 233 function = "gpio"; 234 drive-strength = <8>; 235 bias-pull-up; 236 }; 237 238 ts_reset_active: ts-reset-active-state { 239 pins = "gpio64"; 240 function = "gpio"; 241 drive-strength = <0x08>; 242 bias-pull-up; 243 }; 244}; 245 246&usb3 { 247 status = "okay"; 248}; 249 250&usb3_dwc3 { 251 /delete-property/ usb-role-switch; 252 dr_mode = "peripheral"; 253}; 254